1PAM_PASSWDQC(8) BSD System Manager's Manual PAM_PASSWDQC(8)
2
4 pam_passwdqc — Password quality-control PAM module
5
7 [service-name] module-type control-flag pam_passwdqc [options]
8
10 The pam_passwdqc module is a simple password strength checking module for
11 PAM. In addition to checking regular passwords, it offers support for
12 passphrases and can provide randomly generated ones.
13 The pam_passwdqc module provides functionality for only one PAM manage‐
15 ment group: password changing. In terms of the module-type parameter,
16 this is the “password” feature.
17 The pam_chauthtok() service function may ask the user for a new password,
19 and verify that it meets certain minimum standards. If the chosen pass‐
20 word is unsatisfactory, the service function returns PAM_AUTHTOK_ERR.
21 The following options may be passed to the module:
23 min=N0,N1,N2,N3,N4
25 (min=disabled,24,12,8,7) The minimum allowed password lengths for
26 different kinds of passwords/passphrases. The keyword disabled
27 can be used to disallow passwords of a given kind regardless of
28 their length. Each subsequent number is required to be no larger
29 than the preceding one.
30 N0 is used for passwords consisting of characters from one char‐
32 acter class only. The character classes are: digits, lower-case
33 letters, upper-case letters, and other characters. There is also
34 a special class for non-ASCII characters which could not be clas‐
35 sified, but are assumed to be non-digits.
36 N1 is used for passwords consisting of characters from two char‐
38 acter classes which do not meet the requirements for a
39 passphrase.
40 N2 is used for passphrases. A passphrase must consist of suffi‐
42 cient words (see the passphrase option below).
43 N3 and N4 are used for passwords consisting of characters from
45 three and four character classes, respectively.
46 When calculating the number of character classes, upper-case let‐
48 ters used as the first character and digits used as the last
49 character of a password are not counted.
50 In addition to being sufficiently long, passwords are required to
52 contain enough different characters for the character classes and
53 the minimum length they have been checked against.
54 max=N (max=40) The maximum allowed password length. This can be used
56 to prevent users from setting passwords which may be too long for
57 some system services. The value 8 is treated specially: if max
58 is set to 8, passwords longer than 8 characters will not be
59 rejected, but will be truncated to 8 characters for the strength
60 checks and the user will be warned. This is to be used with the
61 traditional DES-based password hashes, which truncate the pass‐
62 word at 8 characters.
63 It is important that you do set max=8 if you are using the tradi‐
65 tional hashes, or some weak passwords will pass the checks.
66 passphrase=N
68 (passphrase=3) The number of words required for a passphrase, or
69 0 to disable the support for user-chosen passphrases.
70 match=N
72 (match=4) The length of common substring required to conclude
73 that a password is at least partially based on information found
74 in a character string, or 0 to disable the substring search.
75 Note that the password will not be rejected once a weak substring
76 is found; it will instead be subjected to the usual strength
77 requirements with the weak substring removed.
78 The substring search is case-insensitive and is able to detect
80 and remove a common substring spelled backwards.
81 similar=permit|deny
83 (similar=deny) Whether a new password is allowed to be similar to
84 the old one. The passwords are considered to be similar when
85 there is a sufficiently long common substring and the new pass‐
86 word with the substring removed would be weak.
87 random=N[,only]
89 (random=42) The size of randomly-generated passphrases in bits
90 (24 to 72), or 0 to disable this feature. Any passphrase that
91 contains the offered randomly-generated string will be allowed
92 regardless of other possible restrictions.
93 The only modifier can be used to disallow user-chosen passwords.
95 enforce=none|users|everyone
97 (enforce=everyone) The module can be configured to warn of weak
98 passwords only, but not actually enforce strong passwords. The
99 users setting will enforce strong passwords for invocations by
100 non-root users only.
101 non-unix
103 Normally, pam_passwdqc uses getpwnam(3) to obtain the user's per‐
104 sonal login information and use that during the password strength
105 checks. This behavior can be disabled with the non-unix option.
106 retry=N
108 (retry=3) The number of times the module will ask for a new pass‐
109 word if the user fails to provide a sufficiently strong password
110 and enter it twice the first time.
111 ask_oldauthtok[=update]
113 Ask for the old password as well. Normally, pam_passwdqc leaves
114 this task for subsequent modules. With no argument, the
115 ask_oldauthtok option will cause pam_passwdqc to ask for the old
116 password during the preliminary check phase. If the
117 ask_oldauthtok option is specified with the update argument,
118 pam_passwdqc will do that during the update phase.
119 check_oldauthtok
121 This tells pam_passwdqc to validate the old password before giv‐
122 ing a new password prompt. Normally, this task is left for sub‐
123 sequent modules.
124 The primary use for this option is when ask_oldauthtok=update is
126 also specified, in which case no other module gets a chance to
127 ask for and validate the password. Of course, this will only
128 work with UNIX passwords.
129 use_first_pass, use_authtok
131 Use the new password obtained by modules stacked before
132 pam_passwdqc. This disables user interaction within
133 pam_passwdqc. The only difference between use_first_pass and
134 use_authtok is that the former is incompatible with
135 ask_oldauthtok.
136
138 getpwnam(3), pam.conf(5), pam(8)
139
141 The pam_passwdqc module was written for Openwall GNU/*/Linux by Solar
142 Designer <solar at openwall.com>. This manual page, derived from the
143 author's documentation, was written for the FreeBSD Project by ThinkSec
144 AS and NAI Labs, the Security Research Division of Network Associates,
145 Inc. under DARPA/SPAWAR contract N66001-01-C-8035 (“CBOSS”), as part of
146 the DARPA CHATS research program.
147BSD January 26, 2005 BSD