1SG_EMC_TRESPASS(8) SG3_UTILS SG_EMC_TRESPASS(8)
2
3
4
6 sg_emc_trespass - Changes ownership of a LUN from another Service-Pro‐
7 cessor to this one.
8
10 sg_emc_trespass [-d] [-hr] [-s] [-V] DEVICE
11
13 sg_emc_trespass sends an EMC-specific Trespass Command to the DEVICE
14 with the selected options. This Mode Select changes the ownership of
15 the LUN of the device from another Service-Processor to the one the
16 command was received on.
17
19 Arguments to long options are mandatory for short options as well.
20
21 -d outputs some extra debug information associated with executing
22 this command
23
24 -hr Sets the 'Honor Reservation' bit in the command. If set, the
25 trespass will only succeed to change the ownership from the Peer
26 SP if the Peer SP does not have an outstanding SCSI reservation
27 for the LUN. By default, the reservation state will be ignored.
28
29 -s Send the short version of the trespass command instead of the
30 long version. The short version is supported on the EMC FC5300,
31 FC4500 and FC4700. The long version (default) is supported on
32 the CLARiiON CX and AX family arrays.
33
34 -V print out version string then exit.
35
36 In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic
37 (sg) device. In the 2.6 series block devices (e.g. SCSI disks and DVD
38 drives) can also be specified. For example "sg_start 0 /dev/sda" will
39 work in the 2.6 series kernels.
40
42 The exit status of sg_emc_trespass is 0 when it is successful. Other‐
43 wise see the sg3_utils(8) man page.
44
46 Written by Lars Marowsky-Bree, based on sg_start.
47
49 Report bugs to <dgilbert at interlog dot com>.
50
52 Copyright © 2004 Lars Marowsky-Bree, Douglas Gilbert.
53 This software is distributed under the GPL version 2. There is NO war‐
54 ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR‐
55 POSE.
56
57
58
59sg3_utils-1.23 January 2007 SG_EMC_TRESPASS(8)