1CCW_DEVICE_START_TIM(9) The ccw bus CCW_DEVICE_START_TIM(9)
2
3
4
6 ccw_device_start_timeout_key - start a s390 channel program with
7 timeout and key
8
10 int ccw_device_start_timeout_key(struct ccw_device * cdev,
11 struct ccw1 * cpa,
12 unsigned long intparm, __u8 lpm,
13 __u8 key, unsigned long flags,
14 int expires);
15
17 cdev
18 target ccw device
19
20 cpa
21 logical start address of channel program
22
23 intparm
24 user specific interruption parameter; will be presented back to
25 cdev´s interrupt handler. Allows a device driver to associate the
26 interrupt with a particular I/O request.
27
28 lpm
29 defines the channel path to be used for a specific I/O request. A
30 value of 0 will make cio use the opm.
31
32 key
33 storage key to be used for the I/O
34
35 flags
36 additional flags; defines the action to be performed for I/O
37 processing.
38
39 expires
40 timeout value in jiffies
41
43 Start a S/390 channel program. When the interrupt arrives, the IRQ
44 handler is called, either immediately, delayed (dev-end missing, or
45 sense required) or never (no IRQ handler registered). This function
46 notifies the device driver if the channel program has not completed
47 during the time specified by expires. If a timeout occurs, the channel
48 program is terminated via xsch, hsch or csch, and the device´s
49 interrupt handler will be called with an irb containing
50 ERR_PTR(-ETIMEDOUT).
51
53 0, if the operation was successful; -EBUSY, if the device is busy, or
54 status pending; -EACCES, if no path specified in lpm is operational;
55 -ENODEV, if the device is not operational.
56
58 Interrupts disabled, ccw device lock held
59
61 Cornelia Huck <cornelia.huck@de.ibm.com>
62 Author.
63
65Kernel Hackers Manual 2.6. June 2019 CCW_DEVICE_START_TIM(9)