1WBINFO(1) User Commands WBINFO(1)
2
6 wbinfo - Query information from winbind daemon
7
9 wbinfo [-a user%password] [--all-domains] [--allocate-gid]
10 [--allocate-uid] [-c] [--ccache-save] [--change-user-password]
11 [-D domain] [--dc-info domain] [--domain domain]
12 [--dsgetdcname domain] [-g] [--getdcname domain] [--get-auth-user]
13 [-G gid] [--gid-info gid] [--group-info group] [--help|-?] [-i user]
14 [-I ip] [-K user%password] [--krb5ccname cctype] [--lanman] [--logoff]
15 [--logoff-uid uid] [--logoff-user username] [--lookup-sids] [-m]
16 [-n name] [-N netbios-name] [--ntlmv2] [--online-status]
17 [--own-domain] [-p] [-P|--ping-dc] [--pam-logon user%password]
18 [-r user] [-R|--lookup-rids] [--remove-gid-mapping gid,sid]
19 [--remove-uid-mapping uid,sid] [-s sid] [--separator] [--sequence]
20 [--set-auth-user user%password] [--set-gid-mapping gid,sid]
21 [--set-uid-mapping uid,sid] [-S sid] [--sid-aliases sid]
22 [--sid-to-fullname sid] [--sids-to-unix-ids sidlist] [-t] [-u]
23 [--uid-info uid] [--usage] [--user-domgroups sid] [--user-sidinfo sid]
24 [--user-sids sid] [-U uid] [-V] [--verbose] [-Y sid]
25
27 This tool is part of the samba(7) suite.
28 The wbinfo program queries and returns information created and used by
30 the winbindd(8) daemon.
31 The winbindd(8) daemon must be configured and running for the wbinfo
33 program to be able to return information.
34
36 -a|--authenticate username%password
37 Attempt to authenticate a user via winbindd(8). This checks both
38 authentication methods and reports its results.
39 Note
41 Do not be tempted to use this functionality for authentication
42 in third-party applications. Instead use ntlm_auth(1).
43 --allocate-gid
45 Get a new GID out of idmap
46 --allocate-uid
48 Get a new UID out of idmap
49 --all-domains
51 List all domains (trusted and own domain).
52 -c|--change-secret
54 Change the trust account password. May be used in conjunction with
55 domain in order to change interdomain trust account passwords.
56 --ccache-save username%password
58 Store user and password for ccache.
59 --change-user-password username
61 Change the password of a user. The old and new password will be
62 prompted.
63 --dc-info domain
65 Displays information about the current domain controller for a
66 domain.
67 --domain name
69 This parameter sets the domain on which any specified operations
70 will performed. If special domain name ´.´ is used to represent the
71 current domain to which winbindd(8) belongs. A ´*´ as the domain
72 name means to enumerate over all domains (NOTE: This can take a
73 long time and use a lot of memory).
74 -D|--domain-info domain
76 Show most of the info we have about the specified domain.
77 --dsgetdcname domain
79 Find a DC for a domain.
80 --gid-info gid
82 Get group info from gid.
83 --group-info group
85 Get group info from group name.
86 -g|--domain-groups
88 This option will list all groups available in the Windows NT domain
89 for which the samba(7) daemon is operating in. Groups in all
90 trusted domains can be listed with the --domain=´*´ option. Note
91 that this operation does not assign group ids to any groups that
92 have not already been seen by winbindd(8).
93 --get-auth-user
95 Print username and password used by winbindd(8) during session
96 setup to a domain controller. Username and password can be set
97 using --set-auth-user. Only available for root.
98 --getdcname domain
100 Get the DC name for the specified domain.
101 -G|--gid-to-sid gid
103 Try to convert a UNIX group id to a Windows NT SID. If the gid
104 specified does not refer to one within the idmap gid range then the
105 operation will fail.
106 -?
108 Print brief help overview.
109 -i|--user-info user
111 Get user info.
112 -I|--WINS-by-ip ip
114 The -I option queries winbindd(8) to send a node status request to
115 get the NetBIOS name associated with the IP address specified by
116 the ip parameter.
117 -K|--krb5auth username%password
119 Attempt to authenticate a user via Kerberos.
120 --krb5ccname KRB5CCNAME
122 Allows to request a sepcific kerberos credential cache type used
123 for authentication.
124 --lanman
126 Use lanman cryptography for user authentication.
127 --logoff
129 Logoff a user.
130 --logoff-uid UID
132 Define user uid used during logoff request.
133 --logoff-user USERNAME
135 Define username used during logoff request.
136 --lookup-sids SID1,SID2...
138 Looks up SIDs. SIDs must be specified as ASCII strings in the
139 traditional Microsoft format. For example,
140 S-1-5-21-1455342024-3071081365-2475485837-500.
141 -m|--trusted-domains
143 Produce a list of domains trusted by the Windows NT server
144 winbindd(8) contacts when resolving names. This list does not
145 include the Windows NT domain the server is a Primary Domain
146 Controller for.
147 -n|--name-to-sid name
149 The -n option queries winbindd(8) for the SID associated with the
150 name specified. Domain names can be specified before the user name
151 by using the winbind separator character. For example
152 CWDOM1/Administrator refers to the Administrator user in the domain
153 CWDOM1. If no domain is specified then the domain used is the one
154 specified in the smb.conf(5) workgroup parameter.
155 -N|--WINS-by-name name
157 The -N option queries winbindd(8) to query the WINS server for the
158 IP address associated with the NetBIOS name specified by the name
159 parameter.
160 --ntlmv2
162 Use NTLMv2 cryptography for user authentication.
163 --online-status domain
165 Show whether domains are marked as online or offline. An optional
166 domain argument limits the output to the online status of a given
167 domain.
168 --own-domain
170 List own domain.
171 --pam-logon username%password
173 Attempt to authenticate a user in the same way pam_winbind would
174 do.
175 -p|--ping
177 Check whether winbindd(8) is still alive. Prints out either
178 ´succeeded´ or ´failed´.
179 -P|--ping-dc
181 Issue a no-effect command to our DC. This checks if our secure
182 channel connection to our domain controller is still alive. It has
183 much less impact than wbinfo -t.
184 -r|--user-groups username
186 Try to obtain the list of UNIX group ids to which the user belongs.
187 This only works for users defined on a Domain Controller.
188 -R|--lookup-rids rid1, rid2, rid3...
190 Converts RIDs to names. Uses a comma separated list of rids.
191 --remove-gid-mapping GID,SID
193 Removes an existing GID to SID mapping from the database.
194 --remove-uid-mapping UID,SID
196 Removes an existing UID to SID mapping from the database.
197 -s|--sid-to-name sid
199 Use -s to resolve a SID to a name. This is the inverse of the -n
200 option above. SIDs must be specified as ASCII strings in the
201 traditional Microsoft format. For example,
202 S-1-5-21-1455342024-3071081365-2475485837-500.
203 --separator
205 Get the active winbind separator.
206 --sequence
208 This command has been deprecated. Please use the --online-status
209 option instead.
210 --set-auth-user username%password
212 Store username and password used by winbindd(8) during session
213 setup to a domain controller. This enables winbindd to operate in a
214 Windows 2000 domain with Restrict Anonymous turned on (a.k.a.
215 Permissions compatible with Windows 2000 servers only).
216 --set-gid-mapping GID,SID
218 Create a GID to SID mapping in the database.
219 --set-uid-mapping UID,SID
221 Create a UID to SID mapping in the database.
222 -S|--sid-to-uid sid
224 Convert a SID to a UNIX user id. If the SID does not correspond to
225 a UNIX user mapped by winbindd(8) then the operation will fail.
226 --sid-aliases sid
228 Get SID aliases for a given SID.
229 --sid-to-fullname sid
231 Converts a SID to a full username (DOMAIN\username).
232 --sids-to-unix-ids sid1,sid2,sid3...
234 Resolve SIDs to Unix IDs. SIDs must be specified as ASCII strings
235 in the traditional Microsoft format. For example,
236 S-1-5-21-1455342024-3071081365-2475485837-500.
237 -t|--check-secret
239 Verify that the workstation trust account created when the Samba
240 server is added to the Windows NT domain is working. May be used in
241 conjunction with domain in order to verify interdomain trust
242 accounts.
243 -u|--domain-users
245 This option will list all users available in the Windows NT domain
246 for which the winbindd(8) daemon is operating in. Users in all
247 trusted domains can be listed with the --domain=´*´ option. Note
248 that this operation does not assign user ids to any users that have
249 not already been seen by winbindd(8) .
250 --uid-info uid
252 Get user info for the user connected to user id UID.
253 --usage
255 Print brief help overview.
256 --user-domgroups sid
258 Get user domain groups.
259 --user-sidinfo sid
261 Get user info by sid.
262 --user-sids sid
264 Get user group SIDs for user.
265 -U|--uid-to-sid uid
267 Try to convert a UNIX user id to a Windows NT SID. If the uid
268 specified does not refer to one within the idmap range then the
269 operation will fail.
270 --verbose
272 Print additional information about the query results.
273 -Y|--sid-to-gid sid
275 Convert a SID to a UNIX group id. If the SID does not correspond to
276 a UNIX group mapped by winbindd(8) then the operation will fail.
277 -V|--version
279 Prints the program version number.
280 -?|--help
282 Print a summary of command line options.
283
285 The wbinfo program returns 0 if the operation succeeded, or 1 if the
286 operation failed. If the winbindd(8) daemon is not working wbinfo will
287 always return failure.
288
290 This man page is correct for version 3 of the Samba suite.
291
293 winbindd(8) and ntlm_auth(1)
294
296 The original Samba software and related utilities were created by
297 Andrew Tridgell. Samba is now developed by the Samba Team as an Open
298 Source project similar to the way the Linux kernel is developed.
299 wbinfo and winbindd were written by Tim Potter.
301 The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The
303 conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander
304 Bokovoy.
305Samba 4.2 06/19/2018 WBINFO(1)