1IBV_MODIFY_QP(3) Libibverbs Programmer's Manual IBV_MODIFY_QP(3)
2
6 ibv_modify_qp - modify the attributes of a queue pair (QP)
7
9 #include <infiniband/verbs.h>
10 int ibv_modify_qp(struct ibv_qp *qp, struct ibv_qp_attr *attr,
12 int attr_mask);
13
15 ibv_modify_qp() modifies the attributes of QP qp with the attributes in
16 attr according to the mask attr_mask. The argument attr is an
17 ibv_qp_attr struct, as defined in <infiniband/verbs.h>.
18 struct ibv_qp_attr {
20 enum ibv_qp_state qp_state; /* Move the QP to this state */
21 enum ibv_qp_state cur_qp_state; /* Assume this is the current QP state */
22 enum ibv_mtu path_mtu; /* Path MTU (valid only for RC/UC QPs) */
23 enum ibv_mig_state path_mig_state; /* Path migration state (valid if HCA supports APM) */
24 uint32_t qkey; /* Q_Key for the QP (valid only for UD QPs) */
25 uint32_t rq_psn; /* PSN for receive queue (valid only for RC/UC QPs) */
26 uint32_t sq_psn; /* PSN for send queue (valid only for RC/UC QPs) */
27 uint32_t dest_qp_num; /* Destination QP number (valid only for RC/UC QPs) */
28 int qp_access_flags; /* Mask of enabled remote access operations (valid only for RC/UC QPs) */
29 struct ibv_qp_cap cap; /* QP capabilities (valid if HCA supports QP resizing) */
30 struct ibv_ah_attr ah_attr; /* Primary path address vector (valid only for RC/UC QPs) */
31 struct ibv_ah_attr alt_ah_attr; /* Alternate path address vector (valid only for RC/UC QPs) */
32 uint16_t pkey_index; /* Primary P_Key index */
33 uint16_t alt_pkey_index; /* Alternate P_Key index */
34 uint8_t en_sqd_async_notify; /* Enable SQD.drained async notification (Valid only if qp_state is SQD) */
35 uint8_t sq_draining; /* Is the QP draining? Irrelevant for ibv_modify_qp() */
36 uint8_t max_rd_atomic; /* Number of outstanding RDMA reads & atomic operations on the destination QP (valid only for RC QPs) */
37 uint8_t max_dest_rd_atomic; /* Number of responder resources for handling incoming RDMA reads & atomic operations (valid only for RC QPs) */
38 uint8_t min_rnr_timer; /* Minimum RNR NAK timer (valid only for RC QPs) */
39 uint8_t port_num; /* Primary port number */
40 uint8_t timeout; /* Local ack timeout for primary path (valid only for RC QPs) */
41 uint8_t retry_cnt; /* Retry count (valid only for RC QPs) */
42 uint8_t rnr_retry; /* RNR retry (valid only for RC QPs) */
43 uint8_t alt_port_num; /* Alternate port number */
44 uint8_t alt_timeout; /* Local ack timeout for alternate path (valid only for RC QPs) */
45 uint32_t rate_limit; /* Rate limit in kbps for packet pacing */
46 };
47 For details on struct ibv_qp_cap see the description of ibv_cre‐
49 ate_qp(). For details on struct ibv_ah_attr see the description of
50 ibv_create_ah().
51 The argument attr_mask specifies the QP attributes to be modified. The
53 argument is either 0 or the bitwise OR of one or more of the following
54 flags:
55 IBV_QP_STATE Modify qp_state
57 IBV_QP_CUR_STATE Set cur_qp_state
59 IBV_QP_EN_SQD_ASYNC_NOTIFY Set en_sqd_async_notify
61 IBV_QP_ACCESS_FLAGS Set qp_access_flags
63 IBV_QP_PKEY_INDEX Set pkey_index
65 IBV_QP_PORT Set port_num
67 IBV_QP_QKEY Set qkey
69 IBV_QP_AV Set ah_attr
71 IBV_QP_PATH_MTU Set path_mtu
73 IBV_QP_TIMEOUT Set timeout
75 IBV_QP_RETRY_CNT Set retry_cnt
77 IBV_QP_RNR_RETRY Set rnr_retry
79 IBV_QP_RQ_PSN Set rq_psn
81 IBV_QP_MAX_QP_RD_ATOMIC Set max_rd_atomic
83 IBV_QP_ALT_PATH Set the alternative path via: alt_ah_attr,
85 alt_pkey_index, alt_port_num, alt_timeout
86 IBV_QP_MIN_RNR_TIMER Set min_rnr_timer
88 IBV_QP_SQ_PSN Set sq_psn
90 IBV_QP_MAX_DEST_RD_ATOMIC Set max_dest_rd_atomic
92 IBV_QP_PATH_MIG_STATE Set path_mig_state
94 IBV_QP_CAP Set cap
96 IBV_QP_DEST_QPN Set dest_qp_num
98 IBV_QP_RATE_LIMIT Set rate_limit
99
101 ibv_modify_qp() returns 0 on success, or the value of errno on failure
102 (which indicates the failure reason).
103
105 If any of the modify attributes or the modify mask are invalid, none of
106 the attributes will be modified (including the QP state).
107 Not all devices support resizing QPs. To check if a device supports
109 it, check if the IBV_DEVICE_RESIZE_MAX_WR bit is set in the device
110 capabilities flags.
111 Not all devices support alternate paths. To check if a device supports
113 it, check if the IBV_DEVICE_AUTO_PATH_MIG bit is set in the device
114 capabilities flags.
115 The following tables indicate for each QP Transport Service Type, the
117 minimum list of attributes that must be changed upon transitioning QP
118 state from: Reset --> Init --> RTR --> RTS.
119 For QP Transport Service Type IBV_QPT_UD:
121 Next state Required attributes
123 ---------- ----------------------------------------
124 Init IBV_QP_STATE, IBV_QP_PKEY_INDEX, IBV_QP_PORT,
125 IBV_QP_QKEY
126 RTR IBV_QP_STATE
127 RTS IBV_QP_STATE, IBV_QP_SQ_PSN
128 For QP Transport Service Type IBV_QPT_UC:
130 Next state Required attributes
132 ---------- ----------------------------------------
133 Init IBV_QP_STATE, IBV_QP_PKEY_INDEX, IBV_QP_PORT,
134 IBV_QP_ACCESS_FLAGS
135 RTR IBV_QP_STATE, IBV_QP_AV, IBV_QP_PATH_MTU,
136 IBV_QP_DEST_QPN, IBV_QP_RQ_PSN
137 RTS IBV_QP_STATE, IBV_QP_SQ_PSN
138 For QP Transport Service Type IBV_QPT_RC:
140 Next state Required attributes
142 ---------- ----------------------------------------
143 Init IBV_QP_STATE, IBV_QP_PKEY_INDEX, IBV_QP_PORT,
144 IBV_QP_ACCESS_FLAGS
145 RTR IBV_QP_STATE, IBV_QP_AV, IBV_QP_PATH_MTU,
146 IBV_QP_DEST_QPN, IBV_QP_RQ_PSN,
147 IBV_QP_MAX_DEST_RD_ATOMIC, IBV_QP_MIN_RNR_TIMER
148 RTS IBV_QP_STATE, IBV_QP_SQ_PSN, IBV_QP_MAX_QP_RD_ATOMIC,
149 IBV_QP_RETRY_CNT, IBV_QP_RNR_RETRY, IBV_QP_TIMEOUT
150 For QP Transport Service Type IBV_QPT_RAW_PACKET:
152 Next state Required attributes
154 ---------- ----------------------------------------
155 Init IBV_QP_STATE, IBV_QP_PORT
156 RTR IBV_QP_STATE
157 RTS IBV_QP_STATE
158
160 ibv_create_qp(3), ibv_destroy_qp(3), ibv_query_qp(3), ibv_create_ah(3)
161
163 Dotan Barak <dotanba@gmail.com>
164libibverbs 2006-10-31 IBV_MODIFY_QP(3)