1OCF_HEARTBEAT_ETHMON(7) OCF resource agents OCF_HEARTBEAT_ETHMON(7)
2
6 ocf_heartbeat_ethmonitor - Monitors network interfaces
7
9 ethmonitor [start | stop | status | monitor | meta-data | validate-all]
10
12 Monitor the vitality of a local network interface.
13 You may set up this RA as a clone resource to monitor the network
15 interfaces on different nodes, with the same interface name. This is
16 not related to the IP address or the network on which a interface is
17 configured. You may use this RA to move resources away from a node,
18 which has a faulty interface or prevent moving resources to such a
19 node. This gives you independent control of the resources, without
20 involving cluster intercommunication. But it requires your nodes to
21 have more than one network interface.
22 The resource configuration requires a monitor operation, because the
24 monitor does the main part of the work. In addition to the resource
25 configuration, you need to configure some location constraints, based
26 on a CIB attribute value. The name of the attribute value is configured
27 in the 'name' option of this RA.
28 Example constraint configuration using crmsh location
30 loc_connected_node my_resource_grp rule ="rule_loc_connected_node"
31 -INF: ethmonitor eq 0
32 Example constraint configuration using pcs. Only allow 'my_resource' to
34 run on nodes where eth0 ethernet device is available. pcs constraint
35 location my_resource rule score=-INFINITY ethmonitor-eth0 ne 1
36 The ethmonitor works in 3 different modes to test the interface
38 vitality. 1. call ip to see if the link status is up (if link is down
39 -> error) 2. call ip and watch the RX counter (if packages come around
40 in a certain time -> success) 3. call arping to check whether any of
41 the IPs found in the local ARP cache answers an ARP REQUEST (one answer
42 -> success) 4. return error
43
45 interface
46 The name of the network interface which should be monitored (e.g.
47 eth0).
48 (unique, required, string, no default)
50 name
52 The name of the CIB attribute to set. This is the name to be used
53 in the constraints. Defaults to "ethmonitor-'interface_name'".
54 (unique, optional, string, no default)
56 multiplier
58 Multiplier for the value of the CIB attriobute specified in
59 parameter name.
60 (optional, integer, default 1)
62 repeat_count
64 Specify how often the interface will be monitored, before the
65 status is set to failed. You need to set the timeout of the
66 monitoring operation to at least repeat_count * repeat_interval
67 (optional, integer, default 5)
69 repeat_interval
71 Specify how long to wait in seconds between the repeat_counts.
72 (optional, integer, default 10)
74 pktcnt_timeout
76 Timeout for the RX packet counter. Stop listening for packet
77 counter changes after the given number of seconds.
78 (optional, integer, default 5)
80 arping_count
82 Number of ARP REQUEST packets to send for every IP. Usually one ARP
83 REQUEST (arping) is send
84 (optional, integer, default 1)
86 arping_timeout
88 Time in seconds to wait for ARP REQUESTs (all packets of
89 arping_count). This is to limit the time for arp requests, to be
90 able to send requests to more than one node, without running in the
91 monitor operation timeout.
92 (optional, integer, default 1)
94 arping_cache_entries
96 Maximum number of IPs from ARP cache list to check for ARP REQUEST
97 (arping) answers. Newest entries are tried first.
98 (optional, integer, default 5)
100 infiniband_device
102 For interfaces that are infiniband devices.
103 (optional, string, no default)
105 infiniband_port
107 For infiniband devices, this is the port to monitor.
108 (optional, integer, no default)
110 link_status_only
112 Only report success based on link status. Do not perform RX counter
113 or arping related connectivity tests.
114 (optional, boolean, default false)
116
118 This resource agent supports the following actions (operations):
119 start
121 Starts the resource. Suggested minimum timeout: 60s.
122 stop
124 Stops the resource. Suggested minimum timeout: 20s.
125 status
127 Performs a status check. Suggested minimum timeout: 60s. Suggested
128 interval: 10s.
129 monitor
131 Performs a detailed status check. Suggested minimum timeout: 60s.
132 Suggested interval: 10s.
133 meta-data
135 Retrieves resource agent metadata (internal use only). Suggested
136 minimum timeout: 5s.
137 validate-all
139 Performs a validation of the resource configuration. Suggested
140 minimum timeout: 20s.
141
143 The following is an example configuration for a ethmonitor resource
144 using the crm(8) shell:
145 primitive p_ethmonitor ocf:heartbeat:ethmonitor \
147 params \
148 interface=string \
149 op monitor depth="0" timeout="60s" interval="10s"
150
152 The following is an example configuration for a ethmonitor resource
153 using pcs(8)
154 pcs resource create p_ethmonitor ocf:heartbeat:ethmonitor \
156 interface=string \
157 op monitor depth="0" timeout="60s" interval="10s"
158
160 http://clusterlabs.org/
161
163 ClusterLabs contributors (see the resource agent source for information
164 about individual authors)
165resource-agents UNKNOWN 03/14/2019 OCF_HEARTBEAT_ETHMON(7)