1GIT-RECEIVE-PACK(1) Git Manual GIT-RECEIVE-PACK(1)
2
6 git-receive-pack - Receive what is pushed into the repository
7
9 git-receive-pack <directory>
10
13 Invoked by git send-pack and updates the repository with the
14 information fed from the remote end.
15 This command is usually not invoked directly by the end user. The UI
17 for the protocol is on the git send-pack side, and the program pair is
18 meant to be used to push updates to remote repository. For pull
19 operations, see git-fetch-pack(1).
20 The command allows for creation and fast-forwarding of sha1 refs
22 (heads/tags) on the remote end (strictly speaking, it is the local end
23 git-receive-pack runs, but to the user who is sitting at the send-pack
24 end, it is updating the remote. Confused?)
25 There are other real-world examples of using update and post-update
27 hooks found in the Documentation/howto directory.
28 git-receive-pack honours the receive.denyNonFastForwards config option,
30 which tells it if updates to a ref should be denied if they are not
31 fast-forwards.
32 A number of other receive.* config options are available to tweak its
34 behavior, see git-config(1).
35
37 <directory>
38 The repository to sync into.
39
41 Before any ref is updated, if $GIT_DIR/hooks/pre-receive file exists
42 and is executable, it will be invoked once with no parameters. The
43 standard input of the hook will be one line per ref to be updated:
44 sha1-old SP sha1-new SP refname LF
46 The refname value is relative to $GIT_DIR; e.g. for the master head
48 this is "refs/heads/master". The two sha1 values before each refname
49 are the object names for the refname before and after the update. Refs
50 to be created will have sha1-old equal to 0{40}, while refs to be
51 deleted will have sha1-new equal to 0{40}, otherwise sha1-old and
52 sha1-new should be valid objects in the repository.
53 When accepting a signed push (see git-push(1)), the signed push
55 certificate is stored in a blob and an environment variable
56 GIT_PUSH_CERT can be consulted for its object name. See the description
57 of post-receive hook for an example. In addition, the certificate is
58 verified using GPG and the result is exported with the following
59 environment variables:
60 GIT_PUSH_CERT_SIGNER
62 The name and the e-mail address of the owner of the key that signed
63 the push certificate.
64 GIT_PUSH_CERT_KEY
66 The GPG key ID of the key that signed the push certificate.
67 GIT_PUSH_CERT_STATUS
69 The status of GPG verification of the push certificate, using the
70 same mnemonic as used in %G? format of git log family of commands
71 (see git-log(1)).
72 GIT_PUSH_CERT_NONCE
74 The nonce string the process asked the signer to include in the
75 push certificate. If this does not match the value recorded on the
76 "nonce" header in the push certificate, it may indicate that the
77 certificate is a valid one that is being replayed from a separate
78 "git push" session.
79 GIT_PUSH_CERT_NONCE_STATUS
81 UNSOLICITED
83 "git push --signed" sent a nonce when we did not ask it to send
84 one.
85 MISSING
87 "git push --signed" did not send any nonce header.
88 BAD
90 "git push --signed" sent a bogus nonce.
91 OK
93 "git push --signed" sent the nonce we asked it to send.
94 SLOP
96 "git push --signed" sent a nonce different from what we asked
97 it to send now, but in a previous session. See
98 GIT_PUSH_CERT_NONCE_SLOP environment variable.
99 GIT_PUSH_CERT_NONCE_SLOP
101 "git push --signed" sent a nonce different from what we asked it to
102 send now, but in a different session whose starting time is
103 different by this many seconds from the current session. Only
104 meaningful when GIT_PUSH_CERT_NONCE_STATUS says SLOP. Also read
105 about receive.certNonceSlop variable in git-config(1).
106 This hook is called before any refname is updated and before any
108 fast-forward checks are performed.
109 If the pre-receive hook exits with a non-zero exit status no updates
111 will be performed, and the update, post-receive and post-update hooks
112 will not be invoked either. This can be useful to quickly bail out if
113 the update is not to be supported.
114 See the notes on the quarantine environment below.
116
118 Before each ref is updated, if $GIT_DIR/hooks/update file exists and is
119 executable, it is invoked once per ref, with three parameters:
120 $GIT_DIR/hooks/update refname sha1-old sha1-new
122 The refname parameter is relative to $GIT_DIR; e.g. for the master head
124 this is "refs/heads/master". The two sha1 arguments are the object
125 names for the refname before and after the update. Note that the hook
126 is called before the refname is updated, so either sha1-old is 0{40}
127 (meaning there is no such ref yet), or it should match what is recorded
128 in refname.
129 The hook should exit with non-zero status if it wants to disallow
131 updating the named ref. Otherwise it should exit with zero.
132 Successful execution (a zero exit status) of this hook does not ensure
134 the ref will actually be updated, it is only a prerequisite. As such it
135 is not a good idea to send notices (e.g. email) from this hook.
136 Consider using the post-receive hook instead.
137
139 After all refs were updated (or attempted to be updated), if any ref
140 update was successful, and if $GIT_DIR/hooks/post-receive file exists
141 and is executable, it will be invoked once with no parameters. The
142 standard input of the hook will be one line for each successfully
143 updated ref:
144 sha1-old SP sha1-new SP refname LF
146 The refname value is relative to $GIT_DIR; e.g. for the master head
148 this is "refs/heads/master". The two sha1 values before each refname
149 are the object names for the refname before and after the update. Refs
150 that were created will have sha1-old equal to 0{40}, while refs that
151 were deleted will have sha1-new equal to 0{40}, otherwise sha1-old and
152 sha1-new should be valid objects in the repository.
153 The GIT_PUSH_CERT* environment variables can be inspected, just as in
155 pre-receive hook, after accepting a signed push.
156 Using this hook, it is easy to generate mails describing the updates to
158 the repository. This example script sends one mail message per ref
159 listing the commits pushed to the repository, and logs the push
160 certificates of signed pushes with good signatures to a logger service:
161 #!/bin/sh
163 # mail out commit update information.
164 while read oval nval ref
165 do
166 if expr "$oval" : '0*$' >/dev/null
167 then
168 echo "Created a new ref, with the following commits:"
169 git rev-list --pretty "$nval"
170 else
171 echo "New commits:"
172 git rev-list --pretty "$nval" "^$oval"
173 fi |
174 mail -s "Changes to ref $ref" commit-list@mydomain
175 done
176 # log signed push certificate, if any
177 if test -n "${GIT_PUSH_CERT-}" && test ${GIT_PUSH_CERT_STATUS} = G
178 then
179 (
180 echo expected nonce is ${GIT_PUSH_NONCE}
181 git cat-file blob ${GIT_PUSH_CERT}
182 ) | mail -s "push certificate from $GIT_PUSH_CERT_SIGNER" push-log@mydomain
183 fi
184 exit 0
185 The exit code from this hook invocation is ignored, however a non-zero
187 exit code will generate an error message.
188 Note that it is possible for refname to not have sha1-new when this
190 hook runs. This can easily occur if another user modifies the ref after
191 it was updated by git-receive-pack, but before the hook was able to
192 evaluate it. It is recommended that hooks rely on sha1-new rather than
193 the current value of refname.
194
196 After all other processing, if at least one ref was updated, and if
197 $GIT_DIR/hooks/post-update file exists and is executable, then
198 post-update will be called with the list of refs that have been
199 updated. This can be used to implement any repository wide cleanup
200 tasks.
201 The exit code from this hook invocation is ignored; the only thing left
203 for git-receive-pack to do at that point is to exit itself anyway.
204 This hook can be used, for example, to run git update-server-info if
206 the repository is packed and is served via a dumb transport.
207 #!/bin/sh
209 exec git update-server-info
210
212 When receive-pack takes in objects, they are placed into a temporary
213 "quarantine" directory within the $GIT_DIR/objects directory and
214 migrated into the main object store only after the pre-receive hook has
215 completed. If the push fails before then, the temporary directory is
216 removed entirely.
217 This has a few user-visible effects and caveats:
219 1. Pushes which fail due to problems with the incoming pack, missing
221 objects, or due to the pre-receive hook will not leave any on-disk
222 data. This is usually helpful to prevent repeated failed pushes
223 from filling up your disk, but can make debugging more challenging.
224 2. Any objects created by the pre-receive hook will be created in the
226 quarantine directory (and migrated only if it succeeds).
227 3. The pre-receive hook MUST NOT update any refs to point to
229 quarantined objects. Other programs accessing the repository will
230 not be able to see the objects (and if the pre-receive hook fails,
231 those refs would become corrupted). For safety, any ref updates
232 from within pre-receive are automatically rejected.
233
235 git-send-pack(1), gitnamespaces(7)
236
238 Part of the git(1) suite
239Git 2.18.1 05/14/2019 GIT-RECEIVE-PACK(1)