1PMDBG(1)                    General Commands Manual                   PMDBG(1)
2
3
4

NAME

6       pmdbg - report Performance Co-Pilot debug options
7

SYNOPSIS

9       pmdbg code ...
10       pmdbg -l [-o]
11       pmdbg -D name[,name ...]
12

DESCRIPTION

14       The components of the Performance Co-Pilot (PCP) use a global mechanism
15       to control diagnostic and debug output.  Historically this was a vector
16       of bit-fields but this was later replaced by an array of debug options.
17       All of the bit-field debug controls  have  an  equivalent  in  the  new
18       scheme,  but  some  new  debug options cannot be represented in the old
19       bit-field scheme.
20
21       pmdbg with a -l argument prints out all the debug options.  Without the
22       -o  argument the output lists the name of each option and some descrip‐
23       tive text.  Otherwise the output is for only the  old  bit-fields  with
24       the  mnemonic  and decimal values of each the bit-field along with some
25       descriptive text.
26
27       pmdbg with a -D argument parses the list of names(s) using __pmParseDe‐
28       bug(3)  and  reports  the corresponding decimal value.  This use is not
29       required in the new scheme, but for the old bit-fields  scheme  it  was
30       useful when debugging and wanting to set the internal value of the con‐
31       trol vector (pmDebug) via  a  debugger,  e.g.   gdb(1).   For  the  new
32       scheme, the same effect can be achieved using the name of the option(s)
33       and calling pmSetDebug(3) from within the debugger.
34
35       The alternative usage also relates to the old bit-field scheme and  the
36       code arguments are values for the debug vector, and the bit-fields that
37       are enabled by each of these values is listed.
38
39       Each code may be an integer, a hexadecimal value or a hexadecimal value
40       prefixed by either ``0x'' or ``0X''.
41
42       Most  applications  using  the  facilities  of  the  PCP  support  a -D
43       name[,name ...]  command-line syntax to enable debug control using  the
44       name(s) of the desired debug options.
45
46       Alternatively  the  initial value of the debug control flags may be set
47       to either a value N (old scheme) or a comma-separated  list  if  option
48       name(s)  (new  scheme)  using  the environment variable $PCP_DEBUG.  If
49       both mechanisms are used the effect is additive, so the resultant flags
50       are those set via $PCP_DEBUG combined with those set via any -D command
51       line options.
52

PCP ENVIRONMENT

54       Environment variables with the prefix PCP_ are used to parameterize the
55       file  and  directory names used by PCP.  On each installation, the file
56       /etc/pcp.conf contains the  local  values  for  these  variables.   The
57       $PCP_CONF  variable may be used to specify an alternative configuration
58       file, as described in pcp.conf(5).
59

SEE ALSO

61       PCPIntro(1),   pmSetDebug(3),    pmClearDebug(3),    __pmParseDebug(3),
62       pcp.conf(5) and pcp.env(5).
63
64
65
66Performance Co-Pilot                  PCP                             PMDBG(1)
Impressum