1RMCPING(8) System Manager Commands RMCPING(8)
2
3
4
6 rmcpping - send RMCP Ping to network hosts
7
9 rmcpping [OPTION...] destination
10
12 rmcpping uses the RMCP Ping request datagram to elicit an RMCP Pong
13 response from a remote host. The utility can be used to verify if a
14 remote host supports RMCP or IPMI. The initial starting sequence number
15 will be randomized. rmcpping will return 0 to the environment if it
16 receives atleast 1 response from the remote host. Otherwise, it exits
17 with a value of 1.
18
20 The following options are available
21
22 -h Output help menu.
23
24 -V Output version.
25
26 -c count
27 Stop after sending count packets.
28
29 -i interval
30 Wait interval seconds between sending each packet. The default
31 is to wait for one second between each packet.
32
33 -I interface address
34 Set source address to specified interface address. Argument may
35 be numeric IP address or name of device.
36
37 -t timeout
38 Time to wait for a response, in seconds. Default is five sec‐
39 onds.
40
41 -v Verbose output.
42
43 -s num Specify an initial starting sequence number. The default is to
44 use a random initial sequence number.
45
46 -d Turn on debugging.
47
49 It has been observed that some remote BMCs can get "confused" and delay
50 packet responses if duplicate packets (with duplicate sequence numbers)
51 are sent in succession very quickly. There is no known way to cleanly
52 deal with a "confused" BMC other than the wait awhile.
53
54 Unlike ping(8), local network devices (e.g. 127.0.0.1) cannot be
55 "pinged".
56
58 Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.
59
61 Copyright (C) 2007-2015 Lawrence Livermore National Security, LLC.
62 Copyright (C) 2003-2007 The Regents of the University of California.
63
64 This program is free software; you can redistribute it and/or modify it
65 under the terms of the GNU General Public License as published by the
66 Free Software Foundation; either version 3 of the License, or (at your
67 option) any later version.
68
70 Command and manpage based off ping(8).
71
73 freeipmi(7), ping(8), ipmiping(8)
74
75 http://www.gnu.org/software/freeipmi/
76
77
78
79rmcpping 1.6.1 2018-02-02 RMCPING(8)