1DVCONT(1)                   General Commands Manual                  DVCONT(1)
2
3
4

NAME

6       dvcont - send control commands to DV cameras
7

SYNOPSIS

9       dvcont <command1> [ <command2> ... ]
10

DESCRIPTION

12       dvcont  is a command line tool to send control commands via an IEEE1394
13       link to a device that implements the AV/C specifications  by  the  1394
14       Trade Association.  Or for the non-techies: dvcont lets you remote con‐
15       trol your DV camera via a Firewire cable.  The following  commands  are
16       understood:
17
18       dev <number>
19              Select device number on chain to use. (dvcont tries to automati‐
20              cally detect the camera. Use the dev command  BEFORE  any  other
21              commands for manual control.)
22
23       play   Tell  the  camera  to play. If already playing, it toggles slow-
24              motion.
25
26       reverse
27              Tell the camera to play in reverse. If already playing, it  tog‐
28              gles slow-motion.
29
30       trickplay < -14 to +14 >
31              Tell  the  camera  to play at various speeds.  0 = forward play,
32              -14  = fastest reverse, -8 = 1X reverse, -1 = slowest reverse, 1
33              =  slowest  forward, 8 = 1X forward, 14 = fastest forward.  (Not
34              supported by all cameras.)
35
36       stop   Tell the camera to stop playing.
37
38       rewind Tell the camera to rewind. (Use in stop or play mode.)
39
40       ff     Tell the camera to fast forward. (Use in stop or play mode.)
41
42       pause  Tell the camera to toggle pause play.
43
44       next   Tell the camera to go to the next frame. (Use in pause mode.)
45
46       nextindex
47              Tell the camera to search for the next scene. (Use in  pause  or
48              play mode.)
49
50       prev   Tell the camera to go to the previous frame. (Use in pause mode)
51
52       previndex
53              Tell  the camera to search for the previous scene. (Use in pause
54              or play mode)
55
56       record Tell the camera to record. (Use with caution!)
57
58       eject  Tell the camera to eject the tape. (Not supported  by  all  cam‐
59              eras.)
60
61       timecode
62              Report  the  timecode  on tape in the format HH:MM:SS:FF (hours,
63              minutes, seconds, intra-second frames).
64
65       seek <timecode>
66              Tell  the  camera  to  go  to  the  timecode,  given  in  format
67              HH:MM:SS:FF as above.
68
69       status Report the status of the device.
70
71       pluginfo
72              Report available plugs.
73
74       verbose
75              Tell the program to tell you debug info.
76
77       version
78              Tell the program to tell you the program version.
79
80       help   Tell the program to show you a help screen.
81

AUTHORS

83       dvcont  was  written  by  Jason  Howard  <jason@spectsoft.com>  and Dan
84       Dennedy <dan@dennedy.org>.  This man page was written with the help  of
85       help2man  by Daniel Kobras <kobras@debian.org> for the Debian GNU/Linux
86       distribution (but may be  used  by  others).  Updated  by  Dan  Dennedy
87       <dan@dennedy.org>.
88
89
90
91
92                                September 2002                       DVCONT(1)