1VIM(1) General Commands Manual VIM(1)
2
6 vim - Vi IMproved, a programmers text editor
7
9 vim [options] [file ..]
10 vim [options] -
11 vim [options] -t tag
12 vim [options] -q [errorfile]
13 ex
15 view
16 gvim gview evim eview
17 rvim rview rgvim rgview
18
20 Vim is a text editor that is upwards compatible to Vi. It can be used
21 to edit all kinds of plain text. It is especially useful for editing
22 programs.
23 There are a lot of enhancements above Vi: multi level undo, multi win‐
25 dows and buffers, syntax highlighting, command line editing, filename
26 completion, on-line help, visual selection, etc.. See ":help
27 vi_diff.txt" for a summary of the differences between Vim and Vi.
28 While running Vim a lot of help can be obtained from the on-line help
30 system, with the ":help" command. See the ON-LINE HELP section below.
31 Most often Vim is started to edit a single file with the command
33 vim file
35 More generally Vim is started with:
37 vim [options] [filelist]
39 If the filelist is missing, the editor will start with an empty buffer.
41 Otherwise exactly one out of the following four may be used to choose
42 one or more files to be edited.
43 file .. A list of filenames. The first one will be the current
45 file and read into the buffer. The cursor will be posi‐
46 tioned on the first line of the buffer. You can get to the
47 other files with the ":next" command. To edit a file that
48 starts with a dash, precede the filelist with "--".
49 - The file to edit is read from stdin. Commands are read
51 from stderr, which should be a tty.
52 -t {tag} The file to edit and the initial cursor position depends on
54 a "tag", a sort of goto label. {tag} is looked up in the
55 tags file, the associated file becomes the current file and
56 the associated command is executed. Mostly this is used
57 for C programs, in which case {tag} could be a function
58 name. The effect is that the file containing that function
59 becomes the current file and the cursor is positioned on
60 the start of the function. See ":help tag-commands".
61 -q [errorfile]
63 Start in quickFix mode. The file [errorfile] is read and
64 the first error is displayed. If [errorfile] is omitted,
65 the filename is obtained from the 'errorfile' option
66 (defaults to "AztecC.Err" for the Amiga, "errors.err" on
67 other systems). Further errors can be jumped to with the
68 ":cn" command. See ":help quickfix".
69 Vim behaves differently, depending on the name of the command (the exe‐
71 cutable may still be the same file).
72 vim The "normal" way, everything is default.
74 ex Start in Ex mode. Go to Normal mode with the ":vi" command.
76 Can also be done with the "-e" argument.
77 view Start in read-only mode. You will be protected from writing
79 the files. Can also be done with the "-R" argument.
80 gvim gview
82 The GUI version. Starts a new window. Can also be done with
83 the "-g" argument.
84 evim eview
86 The GUI version in easy mode. Starts a new window. Can also
87 be done with the "-y" argument.
88 rvim rview rgvim rgview
90 Like the above, but with restrictions. It will not be possi‐
91 ble to start shell commands, or suspend Vim. Can also be
92 done with the "-Z" argument.
93
95 The options may be given in any order, before or after filenames.
96 Options without an argument can be combined after a single dash.
97 +[num] For the first file the cursor will be positioned on line
99 "num". If "num" is missing, the cursor will be positioned
100 on the last line.
101 +/{pat} For the first file the cursor will be positioned on the
103 first occurrence of {pat}. See ":help search-pattern" for
104 the available search patterns.
105 +{command}
107 -c {command}
109 {command} will be executed after the first file has been
110 read. {command} is interpreted as an Ex command. If the
111 {command} contains spaces it must be enclosed in double
112 quotes (this depends on the shell that is used). Example:
113 Vim "+set si" main.c
114 Note: You can use up to 10 "+" or "-c" commands.
115 -S {file} {file} will be sourced after the first file has been read.
117 This is equivalent to -c "source {file}". {file} cannot
118 start with '-'. If {file} is omitted "Session.vim" is used
119 (only works when -S is the last argument).
120 --cmd {command}
122 Like using "-c", but the command is executed just before
123 processing any vimrc file. You can use up to 10 of these
124 commands, independently from "-c" commands.
125 -A If Vim has been compiled with ARABIC support for editing
127 right-to-left oriented files and Arabic keyboard mapping,
128 this option starts Vim in Arabic mode, i.e. 'arabic' is
129 set. Otherwise an error message is given and Vim aborts.
130 -b Binary mode. A few options will be set that makes it pos‐
132 sible to edit a binary or executable file.
133 -C Compatible. Set the 'compatible' option. This will make
135 Vim behave mostly like Vi, even though a .vimrc file
136 exists.
137 -d Start in diff mode. There should be two, three or four
139 file name arguments. Vim will open all the files and show
140 differences between them. Works like vimdiff(1).
141 -d {device} Open {device} for use as a terminal. Only on the Amiga.
143 Example: "-d con:20/30/600/150".
144 -D Debugging. Go to debugging mode when executing the first
146 command from a script.
147 -e Start Vim in Ex mode, just like the executable was called
149 "ex".
150 -E Start Vim in improved Ex mode, just like the executable was
152 called "exim".
153 -f Foreground. For the GUI version, Vim will not fork and
155 detach from the shell it was started in. On the Amiga, Vim
156 is not restarted to open a new window. This option should
157 be used when Vim is executed by a program that will wait
158 for the edit session to finish (e.g. mail). On the Amiga
159 the ":sh" and ":!" commands will not work.
160 --nofork Foreground. For the GUI version, Vim will not fork and
162 detach from the shell it was started in.
163 -F If Vim has been compiled with FKMAP support for editing
165 right-to-left oriented files and Farsi keyboard mapping,
166 this option starts Vim in Farsi mode, i.e. 'fkmap' and
167 'rightleft' are set. Otherwise an error message is given
168 and Vim aborts.
169 -g If Vim has been compiled with GUI support, this option
171 enables the GUI. If no GUI support was compiled in, an
172 error message is given and Vim aborts.
173 -h Give a bit of help about the command line arguments and
175 options. After this Vim exits.
176 -H If Vim has been compiled with RIGHTLEFT support for editing
178 right-to-left oriented files and Hebrew keyboard mapping,
179 this option starts Vim in Hebrew mode, i.e. 'hkmap' and
180 'rightleft' are set. Otherwise an error message is given
181 and Vim aborts.
182 -i {viminfo}
184 When using the viminfo file is enabled, this option sets
185 the filename to use, instead of the default "~/.viminfo".
186 This can also be used to skip the use of the .viminfo file,
187 by giving the name "NONE".
188 -L Same as -r.
190 -l Lisp mode. Sets the 'lisp' and 'showmatch' options on.
192 -m Modifying files is disabled. Resets the 'write' option.
194 You can still modify the buffer, but writing a file is not
195 possible.
196 -M Modifications not allowed. The 'modifiable' and 'write'
198 options will be unset, so that changes are not allowed and
199 files can not be written. Note that these options can be
200 set to enable making modifications.
201 -N No-compatible mode. Reset the 'compatible' option. This
203 will make Vim behave a bit better, but less Vi compatible,
204 even though a .vimrc file does not exist.
205 -n No swap file will be used. Recovery after a crash will be
207 impossible. Handy if you want to edit a file on a very
208 slow medium (e.g. floppy). Can also be done with ":set
209 uc=0". Can be undone with ":set uc=200".
210 -nb Become an editor server for NetBeans. See the docs for
212 details.
213 -o[N] Open N windows stacked. When N is omitted, open one window
215 for each file.
216 -O[N] Open N windows side by side. When N is omitted, open one
218 window for each file.
219 -p[N] Open N tab pages. When N is omitted, open one tab page for
221 each file.
222 -R Read-only mode. The 'readonly' option will be set. You
224 can still edit the buffer, but will be prevented from acci‐
225 dently overwriting a file. If you do want to overwrite a
226 file, add an exclamation mark to the Ex command, as in
227 ":w!". The -R option also implies the -n option (see
228 below). The 'readonly' option can be reset with ":set
229 noro". See ":help 'readonly'".
230 -r List swap files, with information about using them for
232 recovery.
233 -r {file} Recovery mode. The swap file is used to recover a crashed
235 editing session. The swap file is a file with the same
236 filename as the text file with ".swp" appended. See ":help
237 recovery".
238 -s Silent mode. Only when started as "Ex" or when the "-e"
240 option was given before the "-s" option.
241 -s {scriptin}
243 The script file {scriptin} is read. The characters in the
244 file are interpreted as if you had typed them. The same
245 can be done with the command ":source! {scriptin}". If the
246 end of the file is reached before the editor exits, further
247 characters are read from the keyboard.
248 -T {terminal}
250 Tells Vim the name of the terminal you are using. Only
251 required when the automatic way doesn't work. Should be a
252 terminal known to Vim (builtin) or defined in the termcap
253 or terminfo file.
254 -u {vimrc} Use the commands in the file {vimrc} for initializations.
256 All the other initializations are skipped. Use this to
257 edit a special kind of files. It can also be used to skip
258 all initializations by giving the name "NONE". See ":help
259 initialization" within vim for more details.
260 -U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa‐
262 tions. All the other GUI initializations are skipped. It
263 can also be used to skip all GUI initializations by giving
264 the name "NONE". See ":help gui-init" within vim for more
265 details.
266 -V[N] Verbose. Give messages about which files are sourced and
268 for reading and writing a viminfo file. The optional num‐
269 ber N is the value for 'verbose'. Default is 10.
270 -v Start Vim in Vi mode, just like the executable was called
272 "vi". This only has effect when the executable is called
273 "ex".
274 -w {scriptout}
276 All the characters that you type are recorded in the file
277 {scriptout}, until you exit Vim. This is useful if you
278 want to create a script file to be used with "vim -s" or
279 ":source!". If the {scriptout} file exists, characters are
280 appended.
281 -W {scriptout}
283 Like -w, but an existing file is overwritten.
284 -x Use encryption when writing files. Will prompt for a crypt
286 key.
287 -X Don't connect to the X server. Shortens startup time in a
289 terminal, but the window title and clipboard will not be
290 used.
291 -y Start Vim in easy mode, just like the executable was called
293 "evim" or "eview". Makes Vim behave like a click-and-type
294 editor.
295 -Z Restricted mode. Works like the executable starts with
297 "r".
298 -- Denotes the end of the options. Arguments after this will
300 be handled as a file name. This can be used to edit a
301 filename that starts with a '-'.
302 --echo-wid GTK GUI only: Echo the Window ID on stdout.
304 --help Give a help message and exit, just like "-h".
306 --literal Take file name arguments literally, do not expand wild‐
308 cards. This has no effect on Unix where the shell expands
309 wildcards.
310 --noplugin Skip loading plugins. Implied by -u NONE.
312 --remote Connect to a Vim server and make it edit the files given in
314 the rest of the arguments. If no server is found a warning
315 is given and the files are edited in the current Vim.
316 --remote-expr {expr}
318 Connect to a Vim server, evaluate {expr} in it and print
319 the result on stdout.
320 --remote-send {keys}
322 Connect to a Vim server and send {keys} to it.
323 --remote-silent
325 As --remote, but without the warning when no server is
326 found.
327 --remote-wait
329 As --remote, but Vim does not exit until the files have
330 been edited.
331 --remote-wait-silent
333 As --remote-wait, but without the warning when no server is
334 found.
335 --serverlist
337 List the names of all Vim servers that can be found.
338 --servername {name}
340 Use {name} as the server name. Used for the current Vim,
341 unless used with a --remote argument, then it's the name of
342 the server to connect to.
343 --socketid {id}
345 GTK GUI only: Use the GtkPlug mechanism to run gvim in
346 another window.
347 --version Print version information and exit.
349
351 Type ":help" in Vim to get started. Type ":help subject" to get help
352 on a specific subject. For example: ":help ZZ" to get help for the
353 "ZZ" command. Use <Tab> and CTRL-D to complete subjects (":help cmd‐
354 line-completion"). Tags are present to jump from one place to another
355 (sort of hypertext links, see ":help"). All documentation files can be
356 viewed in this way, for example ":help syntax.txt".
357
359 /usr/share/vim/vim73/doc/*.txt
360 The Vim documentation files. Use ":help doc-file-list"
361 to get the complete list.
362 /usr/share/vim/vim73/doc/tags
364 The tags file used for finding information in the docu‐
365 mentation files.
366 /usr/share/vim/vim73/syntax/syntax.vim
368 System wide syntax initializations.
369 /usr/share/vim/vim73/syntax/*.vim
371 Syntax files for various languages.
372 /etc/vimrc System wide Vim initializations.
374 ~/.vimrc Your personal Vim initializations.
376 /etc/gvimrc System wide gvim initializations.
378 ~/.gvimrc Your personal gvim initializations.
380 /usr/share/vim/vim73/optwin.vim
382 Script used for the ":options" command, a nice way to
383 view and set options.
384 /usr/share/vim/vim73/menu.vim
386 System wide menu initializations for gvim.
387 /usr/share/vim/vim73/bugreport.vim
389 Script to generate a bug report. See ":help bugs".
390 /usr/share/vim/vim73/filetype.vim
392 Script to detect the type of a file by its name. See
393 ":help 'filetype'".
394 /usr/share/vim/vim73/scripts.vim
396 Script to detect the type of a file by its contents.
397 See ":help 'filetype'".
398 /usr/share/vim/vim73/print/*.ps
400 Files used for PostScript printing.
401 For recent info read the VIM home page:
403 <URL:http://www.vim.org/>
404
406 vimtutor(1)
407
409 Most of Vim was made by Bram Moolenaar, with a lot of help from others.
410 See ":help credits" in Vim.
411 Vim is based on Stevie, worked on by: Tim Thompson, Tony Andrews and
412 G.R. (Fred) Walter. Although hardly any of the original code remains.
413
415 Probably. See ":help todo" for a list of known problems.
416 Note that a number of things that may be regarded as bugs by some, are
418 in fact caused by a too-faithful reproduction of Vi's behaviour. And
419 if you think other things are bugs "because Vi does it differently",
420 you should take a closer look at the vi_diff.txt file (or type :help
421 vi_diff.txt when in Vim). Also have a look at the 'compatible' and
422 'cpoptions' options.
423 2006 Apr 11 VIM(1)