1AR(1) GNU Development Tools AR(1)
2
6 ar - create, modify, and extract from archives
7
9 ar [-X32_64] [-]p[mod] [--plugin name] [--target bfdname] [relpos]
10 [count] archive [member...]
11
13 The GNU ar program creates, modifies, and extracts from archives. An
14 archive is a single file holding a collection of other files in a
15 structure that makes it possible to retrieve the original individual
16 files (called members of the archive).
17 The original files' contents, mode (permissions), timestamp, owner, and
19 group are preserved in the archive, and can be restored on extraction.
20 GNU ar can maintain archives whose members have names of any length;
22 however, depending on how ar is configured on your system, a limit on
23 member-name length may be imposed for compatibility with archive
24 formats maintained with other tools. If it exists, the limit is often
25 15 characters (typical of formats related to a.out) or 16 characters
26 (typical of formats related to coff).
27 ar is considered a binary utility because archives of this sort are
29 most often used as libraries holding commonly needed subroutines.
30 ar creates an index to the symbols defined in relocatable object
32 modules in the archive when you specify the modifier s. Once created,
33 this index is updated in the archive whenever ar makes a change to its
34 contents (save for the q update operation). An archive with such an
35 index speeds up linking to the library, and allows routines in the
36 library to call each other without regard to their placement in the
37 archive.
38 You may use nm -s or nm --print-armap to list this index table. If an
40 archive lacks the table, another form of ar called ranlib can be used
41 to add just the table.
42 GNU ar can optionally create a thin archive, which contains a symbol
44 index and references to the original copies of the member files of the
45 archive. This is useful for building libraries for use within a local
46 build tree, where the relocatable objects are expected to remain
47 available, and copying the contents of each object would only waste
48 time and space.
49 An archive can either be thin or it can be normal. It cannot be both
51 at the same time. Once an archive is created its format cannot be
52 changed without first deleting it and then creating a new archive in
53 its place.
54 Thin archives are also flattened, so that adding one thin archive to
56 another thin archive does not nest it, as would happen with a normal
57 archive. Instead the elements of the first archive are added
58 individually to the second archive.
59 The paths to the elements of the archive are stored relative to the
61 archive itself.
62 GNU ar is designed to be compatible with two different facilities. You
64 can control its activity using command-line options, like the different
65 varieties of ar on Unix systems; or, if you specify the single command-
66 line option -M, you can control it with a script supplied via standard
67 input, like the MRI "librarian" program.
68
70 GNU ar allows you to mix the operation code p and modifier flags mod in
71 any order, within the first command-line argument.
72 If you wish, you may begin the first command-line argument with a dash.
74 The p keyletter specifies what operation to execute; it may be any of
76 the following, but you must specify only one of them:
77 d Delete modules from the archive. Specify the names of modules to
79 be deleted as member...; the archive is untouched if you specify no
80 files to delete.
81 If you specify the v modifier, ar lists each module as it is
83 deleted.
84 m Use this operation to move members in an archive.
86 The ordering of members in an archive can make a difference in how
88 programs are linked using the library, if a symbol is defined in
89 more than one member.
90 If no modifiers are used with "m", any members you name in the
92 member arguments are moved to the end of the archive; you can use
93 the a, b, or i modifiers to move them to a specified place instead.
94 p Print the specified members of the archive, to the standard output
96 file. If the v modifier is specified, show the member name before
97 copying its contents to standard output.
98 If you specify no member arguments, all the files in the archive
100 are printed.
101 q Quick append; Historically, add the files member... to the end of
103 archive, without checking for replacement.
104 The modifiers a, b, and i do not affect this operation; new members
106 are always placed at the end of the archive.
107 The modifier v makes ar list each file as it is appended.
109 Since the point of this operation is speed, implementations of ar
111 have the option of not updating the archive's symbol table if one
112 exists. Too many different systems however assume that symbol
113 tables are always up-to-date, so GNU ar will rebuild the table even
114 with a quick append.
115 Note - GNU ar treats the command qs as a synonym for r - replacing
117 already existing files in the archive and appending new ones at the
118 end.
119 r Insert the files member... into archive (with replacement). This
121 operation differs from q in that any previously existing members
122 are deleted if their names match those being added.
123 If one of the files named in member... does not exist, ar displays
125 an error message, and leaves undisturbed any existing members of
126 the archive matching that name.
127 By default, new members are added at the end of the file; but you
129 may use one of the modifiers a, b, or i to request placement
130 relative to some existing member.
131 The modifier v used with this operation elicits a line of output
133 for each file inserted, along with one of the letters a or r to
134 indicate whether the file was appended (no old member deleted) or
135 replaced.
136 s Add an index to the archive, or update it if it already exists.
138 Note this command is an exception to the rule that there can only
139 be one command letter, as it is possible to use it as either a
140 command or a modifier. In either case it does the same thing.
141 t Display a table listing the contents of archive, or those of the
143 files listed in member... that are present in the archive.
144 Normally only the member name is shown, but if the modifier O is
145 specified, then the corresponding offset of the member is also
146 displayed. Finally, in order to see the modes (permissions),
147 timestamp, owner, group, and size the v modifier should be
148 included.
149 If you do not specify a member, all files in the archive are
151 listed.
152 If there is more than one file with the same name (say, fie) in an
154 archive (say b.a), ar t b.a fie lists only the first instance; to
155 see them all, you must ask for a complete listing---in our example,
156 ar t b.a.
157 x Extract members (named member) from the archive. You can use the v
159 modifier with this operation, to request that ar list each name as
160 it extracts it.
161 If you do not specify a member, all files in the archive are
163 extracted.
164 Files cannot be extracted from a thin archive.
166 A number of modifiers (mod) may immediately follow the p keyletter, to
168 specify variations on an operation's behavior:
169 a Add new files after an existing member of the archive. If you use
171 the modifier a, the name of an existing archive member must be
172 present as the relpos argument, before the archive specification.
173 b Add new files before an existing member of the archive. If you use
175 the modifier b, the name of an existing archive member must be
176 present as the relpos argument, before the archive specification.
177 (same as i).
178 c Create the archive. The specified archive is always created if it
180 did not exist, when you request an update. But a warning is issued
181 unless you specify in advance that you expect to create it, by
182 using this modifier.
183 D Operate in deterministic mode. When adding files and the archive
185 index use zero for UIDs, GIDs, timestamps, and use consistent file
186 modes for all files. When this option is used, if ar is used with
187 identical options and identical input files, multiple runs will
188 create identical output files regardless of the input files'
189 owners, groups, file modes, or modification times.
190 If binutils was configured with --enable-deterministic-archives,
192 then this mode is on by default. It can be disabled with the U
193 modifier, below.
194 f Truncate names in the archive. GNU ar will normally permit file
196 names of any length. This will cause it to create archives which
197 are not compatible with the native ar program on some systems. If
198 this is a concern, the f modifier may be used to truncate file
199 names when putting them in the archive.
200 i Insert new files before an existing member of the archive. If you
202 use the modifier i, the name of an existing archive member must be
203 present as the relpos argument, before the archive specification.
204 (same as b).
205 l This modifier is accepted but not used.
207 N Uses the count parameter. This is used if there are multiple
209 entries in the archive with the same name. Extract or delete
210 instance count of the given name from the archive.
211 o Preserve the original dates of members when extracting them. If
213 you do not specify this modifier, files extracted from the archive
214 are stamped with the time of extraction.
215 O Display member offsets inside the archive. Use together with the t
217 option.
218 P Use the full path name when matching names in the archive. GNU ar
220 can not create an archive with a full path name (such archives are
221 not POSIX complaint), but other archive creators can. This option
222 will cause GNU ar to match file names using a complete path name,
223 which can be convenient when extracting a single file from an
224 archive created by another tool.
225 s Write an object-file index into the archive, or update an existing
227 one, even if no other change is made to the archive. You may use
228 this modifier flag either with any operation, or alone. Running ar
229 s on an archive is equivalent to running ranlib on it.
230 S Do not generate an archive symbol table. This can speed up
232 building a large library in several steps. The resulting archive
233 can not be used with the linker. In order to build a symbol table,
234 you must omit the S modifier on the last execution of ar, or you
235 must run ranlib on the archive.
236 T Make the specified archive a thin archive. If it already exists
238 and is a regular archive, the existing members must be present in
239 the same directory as archive.
240 u Normally, ar r... inserts all files listed into the archive. If
242 you would like to insert only those of the files you list that are
243 newer than existing members of the same names, use this modifier.
244 The u modifier is allowed only for the operation r (replace). In
245 particular, the combination qu is not allowed, since checking the
246 timestamps would lose any speed advantage from the operation q.
247 U Do not operate in deterministic mode. This is the inverse of the D
249 modifier, above: added files and the archive index will get their
250 actual UID, GID, timestamp, and file mode values.
251 This is the default unless binutils was configured with
253 --enable-deterministic-archives.
254 v This modifier requests the verbose version of an operation. Many
256 operations display additional information, such as filenames
257 processed, when the modifier v is appended.
258 V This modifier shows the version number of ar.
260 The ar program also supports some command line options which are
262 neither modifiers nor actions, but which do change its behaviour in
263 specific ways:
264 --help
266 Displays the list of command line options supported by ar and then
267 exits.
268 --version
270 Displays the version information of ar and then exits.
271 -X32_64
273 ar ignores an initial option spelt -X32_64, for compatibility with
274 AIX. The behaviour produced by this option is the default for GNU
275 ar. ar does not support any of the other -X options; in
276 particular, it does not support -X32 which is the default for AIX
277 ar.
278 --plugin name
280 The optional command line switch --plugin name causes ar to load
281 the plugin called name which adds support for more file formats,
282 including object files with link-time optimization information.
283 This option is only available if the toolchain has been built with
285 plugin support enabled.
286 If --plugin is not provided, but plugin support has been enabled
288 then ar iterates over the files in ${libdir}/bfd-plugins in
289 alphabetic order and the first plugin that claims the object in
290 question is used.
291 Please note that this plugin search directory is not the one used
293 by ld's -plugin option. In order to make ar use the linker plugin
294 it must be copied into the ${libdir}/bfd-plugins directory. For
295 GCC based compilations the linker plugin is called
296 liblto_plugin.so.0.0.0. For Clang based compilations it is called
297 LLVMgold.so. The GCC plugin is always backwards compatible with
298 earlier versions, so it is sufficient to just copy the newest one.
299 --target target
301 The optional command line switch --target bfdname specifies that
302 the archive members are in an object code format different from
303 your system's default format. See
304 @file
306 Read command-line options from file. The options read are inserted
307 in place of the original @file option. If file does not exist, or
308 cannot be read, then the option will be treated literally, and not
309 removed.
310 Options in file are separated by whitespace. A whitespace
312 character may be included in an option by surrounding the entire
313 option in either single or double quotes. Any character (including
314 a backslash) may be included by prefixing the character to be
315 included with a backslash. The file may itself contain additional
316 @file options; any such options will be processed recursively.
317
319 nm(1), ranlib(1), and the Info entries for binutils.
320
322 Copyright (c) 1991-2018 Free Software Foundation, Inc.
323 Permission is granted to copy, distribute and/or modify this document
325 under the terms of the GNU Free Documentation License, Version 1.3 or
326 any later version published by the Free Software Foundation; with no
327 Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
328 Texts. A copy of the license is included in the section entitled "GNU
329 Free Documentation License".
330binutils-2.30.90 2018-07-09 AR(1)