1NMCLI(1) General Commands Manual NMCLI(1)
2
6 nmcli - command-line tool for controlling NetworkManager
7
9 nmcli [OPTIONS...] {help | general | networking | radio | connection |
10 device | agent | monitor} [COMMAND] [ARGUMENTS...]
11
13 nmcli is a command-line tool for controlling NetworkManager and
14 reporting network status. It can be utilized as a replacement for
15 nm-applet or other graphical clients. nmcli is used to create,
16 display, edit, delete, activate, and deactivate network connections, as
17 well as control and display network device status.
18 Typical uses include:
20 · Scripts: Utilize NetworkManager via nmcli instead of managing
22 network connections manually. nmcli supports a terse output format
23 which is better suited for script processing. Note that
24 NetworkManager can also execute scripts, called "dispatcher
25 scripts", in response to network events. See NetworkManager(8) for
26 details about these dispatcher scripts.
27 · Servers, headless machines, and terminals: nmcli can be used to
29 control NetworkManager without a GUI, including creating, editing,
30 starting and stopping network connections and viewing network
31 status.
32
34 -t | --terse
35 Output is terse. This mode is designed and suitable for computer
36 (script) processing.
37 -p | --pretty
39 Output is pretty. This causes nmcli to produce easily readable
40 outputs for humans, i.e. values are aligned, headers are printed,
41 etc.
42 -m | --mode {tabular | multiline}
44 Switch between tabular and multiline output:
45 tabular
47 Output is a table where each line describes a single entry.
48 Columns define particular properties of the entry.
49 multiline
51 Each entry comprises multiple lines, each property on its own
52 line. The values are prefixed with the property name.
53 If omitted, default is tabular for most commands. For the commands
55 producing more structured information, that cannot be displayed on
56 a single line, default is multiline. Currently, they are:
57 · nmcli connection show ID
59 · nmcli device show
61 -c | --colors {yes | no | auto}
63 This option controls color output (using terminal escape
64 sequences). yes enables colors, no disables them, auto only
65 produces colors when standard output is directed to a terminal. The
66 default value is auto.
67 The actual colors used are configured as described in terminal-
69 colors.d(5). Please refer to the COLORS section for a list of color
70 names supported by nmcli.
71 -f | --fields {field1,field2... | all | common}
73 This option is used to specify what fields (column names) should be
74 printed. Valid field names differ for specific commands. List
75 available fields by providing an invalid value to the --fields
76 option. all is used to print all valid field values of the
77 command. common is used to print common field values of the
78 command.
79 If omitted, default is common.
81 -g | --get-values {field1,field2... | all | common}
83 This option is used to print values from specific fields. It is
84 basically a shortcut for --mode tabular --terse --fields and is a
85 convenient way to retrieve values for particular fields. The values
86 are printed one per line without headers.
87 If a section is specified instead of a field, the section name will
89 be printed followed by colon separated values of the fields
90 belonging to that section, all on the same line.
91 -e | --escape {yes | no}
93 Whether to escape : and \ characters in terse tabular mode. The
94 escape character is \.
95 If omitted, default is yes.
97 -a | --ask
99 When using this option nmcli will stop and ask for any missing
100 required arguments, so do not use this option for non-interactive
101 purposes like scripts. This option controls, for example, whether
102 you will be prompted for a password if it is required for
103 connecting to a network.
104 -s | --show-secrets
106 When using this option nmcli will display passwords and secrets
107 that might be present in an output of an operation. This option
108 also influences echoing passwords typed by user as an input.
109 -w | --wait seconds
111 This option sets a timeout period for which nmcli will wait for
112 NetworkManager to finish operations. It is especially useful for
113 commands that may take a longer time to complete, e.g. connection
114 activation.
115 Specifying a value of 0 instructs nmcli not to wait but to exit
117 immediately with a status of success. The default value depends on
118 the executed command.
119 --complete-args
121 Instead of conducting the desired action, nmcli will list possible
122 completions for the last argument. This is useful to implement
123 argument completion in shell.
124 The exit status will indicate success or return a code 65 to
126 indicate the last argument is a file name.
127 NetworkManager ships with command completion support for GNU Bash.
129 -v | --version
131 Show nmcli version.
132 -h | --help
134 Print help information.
135
137 nmcli general {status | hostname | permissions | logging}
138 [ARGUMENTS...]
139 Use this command to show NetworkManager status and permissions. You can
141 also get and change system hostname, as well as NetworkManager logging
142 level and domains.
143 status
145 Show overall status of NetworkManager. This is the default action,
146 when no additional command is provided for nmcli general.
147 hostname [hostname]
149 Get and change system hostname. With no arguments, this prints
150 currently configured hostname. When you pass a hostname, it will be
151 handed over to NetworkManager to be set as a new system hostname.
152 Note that the term "system" hostname may also be referred to as
154 "persistent" or "static" by other programs or tools. The hostname
155 is stored in /etc/hostname file in most distributions. For example,
156 systemd-hostnamed service uses the term "static" hostname and it
157 only reads the /etc/hostname file when it starts.
158 permissions
160 Show the permissions a caller has for various authenticated
161 operations that NetworkManager provides, like enable and disable
162 networking, changing Wi-Fi and WWAN state, modifying connections,
163 etc.
164 logging [level level] [domains domains...]
166 Get and change NetworkManager logging level and domains. Without
167 any argument current logging level and domains are shown. In order
168 to change logging state, provide level and, or, domain parameters.
169 See NetworkManager.conf(5) for available level and domain values.
170
172 nmcli networking {on | off | connectivity} [ARGUMENTS...]
173 Query NetworkManager networking status, enable and disable networking.
175 on, off
177 Enable or disable networking control by NetworkManager. All
178 interfaces managed by NetworkManager are deactivated when
179 networking is disabled.
180 connectivity [check]
182 Get network connectivity state. The optional check argument tells
183 NetworkManager to re-check the connectivity, else the most recent
184 known connectivity state is displayed without re-checking.
185 Possible states are:
187 none
189 the host is not connected to any network.
190 portal
192 the host is behind a captive portal and cannot reach the full
193 Internet.
194 limited
196 the host is connected to a network, but it has no access to the
197 Internet.
198 full
200 the host is connected to a network and has full access to the
201 Internet.
202 unknown
204 the connectivity status cannot be found out.
205
207 nmcli radio {all | wifi | wwan} [ARGUMENTS...]
208 Show radio switches status, or enable and disable the switches.
210 wifi [on | off]
212 Show or set status of Wi-Fi in NetworkManager. If no arguments are
213 supplied, Wi-Fi status is printed; on enables Wi-Fi; off disables
214 Wi-Fi.
215 wwan [on | off]
217 Show or set status of WWAN (mobile broadband) in NetworkManager. If
218 no arguments are supplied, mobile broadband status is printed; on
219 enables mobile broadband, off disables it.
220 all [on | off]
222 Show or set all previously mentioned radio switches at the same
223 time.
224
226 nmcli monitor
227 Observe NetworkManager activity. Watches for changes in connectivity
229 state, devices or connection profiles.
230 See also nmcli connection monitor and nmcli device monitor to watch for
232 changes in certain devices or connections.
233
235 nmcli connection {show | up | down | modify | add | edit | clone |
236 delete | monitor | reload | load | import | export}
237 [ARGUMENTS...]
238 NetworkManager stores all network configuration as "connections", which
240 are collections of data (Layer2 details, IP addressing, etc.) that
241 describe how to create or connect to a network. A connection is
242 "active" when a device uses that connection's configuration to create
243 or connect to a network. There may be multiple connections that apply
244 to a device, but only one of them can be active on that device at any
245 given time. The additional connections can be used to allow quick
246 switching between different networks and configurations.
247 Consider a machine which is usually connected to a DHCP-enabled
249 network, but sometimes connected to a testing network which uses static
250 IP addressing. Instead of manually reconfiguring eth0 each time the
251 network is changed, the settings can be saved as two connections which
252 both apply to eth0, one for DHCP (called default) and one with the
253 static addressing details (called testing). When connected to the
254 DHCP-enabled network the user would run nmcli con up default , and when
255 connected to the static network the user would run nmcli con up
256 testing.
257 show [--active] [--order [+-]category:...]
259 List in-memory and on-disk connection profiles, some of which may
260 also be active if a device is using that connection profile.
261 Without a parameter, all profiles are listed. When --active option
262 is specified, only the active profiles are shown.
263 The --order option can be used to get custom ordering of
265 connections. The connections can be ordered by active status
266 (active), name (name), type (type) or D-Bus path (path). If
267 connections are equal according to a sort order category, an
268 additional category can be specified. The default sorting order is
269 equivalent to --order active:name:path. + or no prefix means
270 sorting in ascending order (alphabetically or in numbers), - means
271 reverse (descending) order. The category names can be abbreviated
272 (e.g. --order -a:na).
273 show [--active] [id | uuid | path | apath] ID...
275 Show details for specified connections. By default, both static
276 configuration and active connection data are displayed. When
277 --active option is specified, only the active profiles are taken
278 into account. Use global --show-secrets option to display secrets
279 associated with the profile.
280 id, uuid, path and apath keywords can be used if ID is ambiguous.
282 Optional ID-specifying keywords are:
283 id
285 the ID denotes a connection name.
286 uuid
288 the ID denotes a connection UUID.
289 path
291 the ID denotes a D-Bus static connection path in the format of
292 /org/freedesktop/NetworkManager/Settings/num or just num.
293 apath
295 the ID denotes a D-Bus active connection path in the format of
296 /org/freedesktop/NetworkManager/ActiveConnection/num or just
297 num.
298 It is possible to filter the output using the global --fields
300 option. Use the following values:
301 profile
303 only shows static profile configuration.
304 active
306 only shows active connection data (when the profile is active).
307 You can also specify particular fields. For static configuration,
309 use setting and property names as described in nm-settings(5)
310 manual page. For active data use GENERAL, IP4, DHCP4, IP6, DHCP6,
311 VPN.
312 When no command is given to the nmcli connection, the default
314 action is nmcli connection show.
315 up [id | uuid | path] ID [ifname ifname] [ap BSSID] [passwd-file file]
317 Activate a connection. The connection is identified by its name,
318 UUID or D-Bus path. If ID is ambiguous, a keyword id, uuid or path
319 can be used. When requiring a particular device to activate the
320 connection on, the ifname option with interface name should be
321 given. If the ID is not given an ifname is required, and
322 NetworkManager will activate the best available connection for the
323 given ifname. In case of a VPN connection, the ifname option
324 specifies the device of the base connection. The ap option specify
325 what particular AP should be used in case of a Wi-Fi connection.
326 If --wait option is not specified, the default timeout will be 90
328 seconds.
329 See connection show above for the description of the ID-specifying
331 keywords.
332 Available options are:
334 ifname
336 interface that will be used for activation.
337 ap
339 BSSID of the AP which the command should connect to (for Wi-Fi
340 connections).
341 passwd-file
343 some networks may require credentials during activation. You
344 can give these credentials using this option. Each line of the
345 file should contain one password in the form:
346 setting_name.property_name:the password
348 For example, for WPA Wi-Fi with PSK, the line would be
350 802-11-wireless-security.psk:secret12345
352 For 802.1X password, the line would be
354 802-1x.password:my 1X password
356 nmcli also accepts wifi-sec and wifi strings instead of
359 802-11-wireless-security. When NetworkManager requires a
360 password and it is not given, nmcli will ask for it when run
361 with --ask. If --ask was not passed, NetworkManager can ask
362 another secret agent that may be running (typically a GUI
363 secret agent, such as nm-applet or gnome-shell).
364 down [id | uuid | path | apath] ID...
366 Deactivate a connection from a device without preventing the device
367 from further auto-activation. Multiple connections can be passed to
368 the command.
369 Be aware that this command deactivates the specified active
371 connection, but the device on which the connection was active, is
372 still ready to connect and will perform auto-activation by looking
373 for a suitable connection that has the 'autoconnect' flag set. This
374 includes the just deactivated connection. So if the connection is
375 set to auto-connect, it will be automatically started on the
376 disconnected device again.
377 In most cases you may want to use device disconnect command
379 instead.
380 The connection is identified by its name, UUID or D-Bus path. If ID
382 is ambiguous, a keyword id, uuid, path or apath can be used.
383 See connection show above for the description of the ID-specifying
385 keywords.
386 If --wait option is not specified, the default timeout will be 10
388 seconds.
389 modify [--temporary] [id | uuid | path] ID
391 {option value | [+|-]setting.property value}...
392 Add, modify or remove properties in the connection profile.
393 To set the property just specify the property name followed by the
395 value. An empty value ("") removes the property value.
396 In addition to the properties, you can also use short names for
398 some of the properties. Consult the PROPERTY ALIASES section for
399 details.
400 If you want to append an item to the existing value, use + prefix
402 for the property name. If you want to remove just one item from
403 container-type property, use - prefix for the property name and
404 specify a value or an zero-based index of the item to remove (or
405 option name for properties with named options) as value. The + and
406 - modifies only have a real effect for multi-value (container)
407 properties like ipv4.dns, ipv4.addresses, bond.options, etc.
408 See nm-settings(5) for complete reference of setting and property
410 names, their descriptions and default values. The setting and
411 property can be abbreviated provided they are unique.
412 The connection is identified by its name, UUID or D-Bus path. If ID
414 is ambiguous, a keyword id, uuid or path can be used.
415 add [save {yes | no}] {option value | [+|-]setting.property value}...
417 Create a new connection using specified properties.
418 You need to describe the newly created connections with the
420 property and value pairs. See nm-settings(5) for the complete
421 reference. You can also use the aliases described in PROPERTY
422 ALIASES section. The syntax is the same as of the nmcli connection
423 modify command.
424 To construct a meaningful connection you at the very least need to
426 set the connection.type property (or use the type alias) to one of
427 known NetworkManager connection types:
428 · ethernet
430 · wifi
432 · wimax
434 · pppoe
436 · gsm
438 · cdma
440 · infiniband
442 · bluetooth
444 · vlan
446 · bond
448 · bond-slave
450 · team
452 · team-slave
454 · bridge
456 · bridge-slave
458 · vpn
460 · olpc-mesh
462 · adsl
464 · tun
466 · ip-tunnel
468 · macvlan
470 · vxlan
472 · dummy
474 The most typical uses are described in the EXAMPLES section.
476 Aside from the properties and values two special options are
478 accepted:
479 save
481 Controls whether the connection should be persistent, i.e.
482 NetworkManager should store it on disk (default: yes).
483 --
485 If a single -- argument is encountered it is ignored. This is
486 for compatibility with older versions on nmcli.
487 edit {[id | uuid | path] ID | [type type] [con-name name] }
489 Edit an existing connection or add a new one, using an interactive
490 editor.
491 The existing connection is identified by its name, UUID or D-Bus
493 path. If ID is ambiguous, a keyword id, uuid, or path can be used.
494 See connection show above for the description of the ID-specifying
495 keywords. Not providing an ID means that a new connection will be
496 added.
497 The interactive editor will guide you through the connection
499 editing and allow you to change connection parameters according to
500 your needs by means of a simple menu-driven interface. The editor
501 indicates what settings and properties can be modified and provides
502 in-line help.
503 Available options:
505 type
507 type of the new connection; valid types are the same as for
508 connection add command.
509 con-name
511 name for the new connection. It can be changed later in the
512 editor.
513 See also nm-settings(5) for all NetworkManager settings and
515 property names, and their descriptions; and nmcli-examples(7) for
516 sample editor sessions.
517 clone [--temporary] [id | uuid | path] ID new_name
519 Clone a connection. The connection to be cloned is identified by
520 its name, UUID or D-Bus path. If ID is ambiguous, a keyword id,
521 uuid or path can be used. See connection show above for the
522 description of the ID-specifying keywords. new_name is the name of
523 the new cloned connection. The new connection will be the exact
524 copy except the connection.id (new_name) and connection.uuid
525 (generated) properties.
526 The new connection profile will be saved as persistent unless
528 --temporary option is specified, in which case the new profile
529 won't exist after NetworkManager restart.
530 delete [id | uuid | path] ID...
532 Delete a configured connection. The connection to be deleted is
533 identified by its name, UUID or D-Bus path. If ID is ambiguous, a
534 keyword id, uuid or path can be used. See connection show above for
535 the description of the ID-specifying keywords.
536 If --wait option is not specified, the default timeout will be 10
538 seconds.
539 monitor [id | uuid | path] ID...
541 Monitor connection profile activity. This command prints a line
542 whenever the specified connection changes. The connection to be
543 monitored is identified by its name, UUID or D-Bus path. If ID is
544 ambiguous, a keyword id, uuid or path can be used. See connection
545 show above for the description of the ID-specifying keywords.
546 Monitors all connection profiles in case none is specified. The
548 command terminates when all monitored connections disappear. If you
549 want to monitor connection creation consider using the global
550 monitor with nmcli monitor command.
551 reload
553 Reload all connection files from disk. NetworkManager does not
554 monitor changes to connection files by default. So you need to use
555 this command in order to tell NetworkManager to re-read the
556 connection profiles from disk when a change was made to them.
557 However, the auto-loading feature can be enabled and then
558 NetworkManager will reload connection files any time they change
559 (monitor-connection-files=true in NetworkManager.conf(5)).
560 load filename...
562 Load/reload one or more connection files from disk. Use this after
563 manually editing a connection file to ensure that NetworkManager is
564 aware of its latest state.
565 import [--temporary] type type file file
567 Import an external/foreign configuration as a NetworkManager
568 connection profile. The type of the input file is specified by type
569 option.
570 Only VPN configurations are supported at the moment. The
572 configuration is imported by NetworkManager VPN plugins. type
573 values are the same as for vpn-type option in nmcli connection add.
574 VPN configurations are imported by VPN plugins. Therefore the
575 proper VPN plugin has to be installed so that nmcli could import
576 the data.
577 The imported connection profile will be saved as persistent unless
579 --temporary option is specified, in which case the new profile
580 won't exist after NetworkManager restart.
581 export [id | uuid | path] ID [file]
583 Export a connection.
584 Only VPN connections are supported at the moment. A proper VPN
586 plugin has to be installed so that nmcli could export a connection.
587 If no file is provided, the VPN configuration data will be printed
588 to standard output.
589
591 nmcli device {status | show | set | connect | reapply | modify |
592 disconnect | delete | monitor | wifi | lldp}
593 [ARGUMENTS...]
594 Show and manage network interfaces.
596 status
598 Print status of devices.
599 This is the default action if no command is specified to nmcli
601 device.
602 show [ifname]
604 Show detailed information about devices. Without an argument, all
605 devices are examined. To get information for a specific device, the
606 interface name has to be provided.
607 set [ifname] ifname [autoconnect {yes | no}] [managed {yes | no}]
609 Set device properties.
610 connect ifname
612 Connect the device. NetworkManager will try to find a suitable
613 connection that will be activated. It will also consider
614 connections that are not set to auto connect.
615 If --wait option is not specified, the default timeout will be 90
617 seconds.
618 reapply ifname
620 Attempt to update device with changes to the currently active
621 connection made since it was last applied.
622 modify ifname {option value | [+|-]setting.property value}...
624 Modify the settings currently active on the device.
625 This command lets you do temporary changes to a configuration
627 active on a particular device. The changes are not preserved in the
628 connection profile.
629 See nm-settings(5) for the list of available properties. Please
631 note that some properties can't be changed on an already connected
632 device.
633 You can also use the aliases described in PROPERTY ALIASES section.
635 The syntax is the same as of the nmcli connection modify command.
636 disconnect ifname...
638 Disconnect a device and prevent the device from automatically
639 activating further connections without user/manual intervention.
640 Note that disconnecting software devices may mean that the devices
641 will disappear.
642 If --wait option is not specified, the default timeout will be 10
644 seconds.
645 delete ifname...
647 Delete a device. The command removes the interface from the system.
648 Note that this only works for software devices like bonds, bridges,
649 teams, etc. Hardware devices (like Ethernet) cannot be deleted by
650 the command.
651 If --wait option is not specified, the default timeout will be 10
653 seconds.
654 monitor [ifname...]
656 Monitor device activity. This command prints a line whenever the
657 specified devices change state.
658 Monitors all devices in case no interface is specified. The monitor
660 terminates when all specified devices disappear. If you want to
661 monitor device addition consider using the global monitor with
662 nmcli monitor command.
663 wifi [list [--rescan | auto | no | yes] [ifname ifname] [bssid BSSID]]
665 List available Wi-Fi access points. The ifname and bssid options
666 can be used to list APs for a particular interface or with a
667 specific BSSID, respectively.
668 By default, nmcli ensures that the access point list is no older
670 than 30 seconds and triggers a network scan if necessary. The
671 --rescan can be used to either force or disable the scan regardless
672 of how fresh the access point list is.
673 wifi connect (B)SSID [password password] [wep-key-type {key | phrase}]
675 [ifname ifname] [bssid BSSID] [name name] [private {yes | no}]
676 [hidden {yes | no}]
677 Connect to a Wi-Fi network specified by SSID or BSSID. The command
678 creates a new connection and then activates it on a device. This is
679 a command-line counterpart of clicking an SSID in a GUI client. The
680 command always creates a new connection and thus it is mainly
681 useful for connecting to new Wi-Fi networks. If a connection for
682 the network already exists, it is better to bring up (activate) the
683 existing connection as follows: nmcli con up id name. Note that
684 only open, WEP and WPA-PSK networks are supported at the moment. It
685 is also supposed that IP configuration is obtained via DHCP.
686 If --wait option is not specified, the default timeout will be 90
688 seconds.
689 Available options are:
691 password
693 password for secured networks (WEP or WPA).
694 wep-key-type
696 type of WEP secret, either key for ASCII/HEX key or phrase for
697 passphrase.
698 ifname
700 interface that will be used for activation.
701 bssid
703 if specified, the created connection will be restricted just
704 for the BSSID.
705 name
707 if specified, the connection will use the name (else NM creates
708 a name itself).
709 private
711 if set to yes, the connection will only be visible to the user
712 who created it. Otherwise the connection is system-wide, which
713 is the default.
714 hidden
716 set to yes when connecting for the first time to an AP not
717 broadcasting its SSID. Otherwise the SSID would not be found
718 and the connection attempt would fail.
719 wifi hotspot [ifname ifname] [con-name name] [ssid SSID]
721 [band {a | bg}] [channel channel] [password password]
722 Create a Wi-Fi hotspot. The command creates a hotspot connection
723 profile according to Wi-Fi device capabilities and activates it on
724 the device. The hotspot is secured with WPA if device/driver
725 supports that, otherwise WEP is used. Use connection down or device
726 disconnect to stop the hotspot.
727 Parameters of the hotspot can be influenced by the optional
729 parameters:
730 ifname
732 what Wi-Fi device is used.
733 con-name
735 name of the created hotspot connection profile.
736 ssid
738 SSID of the hotspot.
739 band
741 Wi-Fi band to use.
742 channel
744 Wi-Fi channel to use.
745 password
747 password to use for the created hotspot. If not provided, nmcli
748 will generate a password. The password is either WPA pre-shared
749 key or WEP key.
750 Note that --show-secrets global option can be used to print the
752 hotspot password. It is useful especially when the password was
753 generated.
754 wifi rescan [ifname ifname] [ssid SSID...]
756 Request that NetworkManager immediately re-scan for available
757 access points. NetworkManager scans Wi-Fi networks periodically,
758 but in some cases it can be useful to start scanning manually (e.g.
759 after resuming the computer). By using ssid, it is possible to scan
760 for a specific SSID, which is useful for APs with hidden SSIDs. You
761 can provide multiple ssid parameters in order to scan more SSIDs.
762 This command does not show the APs, use nmcli device wifi list for
764 that.
765 lldp [list [ifname ifname]]
767 Display information about neighboring devices learned through the
768 Link Layer Discovery Protocol (LLDP). The ifname option can be used
769 to list neighbors only for a given interface. The protocol must be
770 enabled in the connection settings.
771
773 nmcli agent {secret | polkit | all}
774 Run nmcli as a NetworkManager secret agent, or polkit agent.
776 secret
778 Register nmcli as a NetworkManager secret agent and listen for
779 secret requests. You do usually not need this command, because
780 nmcli can handle secrets when connecting to networks. However, you
781 may find the command useful when you use another tool for
782 activating connections and you do not have a secret agent available
783 (like nm-applet).
784 polkit
786 Register nmcli as a polkit agent for the user session and listen
787 for authorization requests. You do not usually need this command,
788 because nmcli can handle polkit actions related to NetworkManager
789 operations (when run with --ask). However, you may find the command
790 useful when you want to run a simple text based polkit agent and
791 you do not have an agent of a desktop environment. Note that
792 running this command makes nmcli handle all polkit requests, not
793 only NetworkManager related ones, because only one polkit agent can
794 run for the session.
795 all
797 Runs nmcli as both NetworkManager secret and a polkit agent.
798
800 Apart from the property-value pairs, connection add, connection modify
801 and device modify also accept short forms of some properties. They
802 exist for convenience. Some aliases can affect multiple connection
803 properties at once.
804 The overview of the aliases is below. An actual connection type is used
806 to disambiguate these options from the options of the same name that
807 are valid for multiple connection types (such as mtu).
808 Table 1. Options for all connections
810 ┌────────────┬───────────────────────────┬─────────────────────────────┐
811 │Alias │ Property │ Note │
812 ├────────────┼───────────────────────────┼─────────────────────────────┤
813 │type │ connection.type │ This alias also │
814 │ │ │ accepts values of │
815 │ │ │ bond-slave, │
816 │ │ │ team-slave and │
817 │ │ │ bridge-slave. They │
818 │ │ │ create ethernet │
819 │ │ │ connection │
820 │ │ │ profiles. Their use │
821 │ │ │ is discouraged in │
822 │ │ │ favor of using a │
823 │ │ │ specific type with │
824 │ │ │ master option. │
825 ├────────────┼───────────────────────────┼─────────────────────────────┤
826 │con-name │ connection.id │ When not provided a │
827 │ │ │ default name is │
828 │ │ │ generated: │
829 │ │ │ <type>[-<ifname>][-<num>]). │
830 ├────────────┼───────────────────────────┼─────────────────────────────┤
831 │autoconnect │ connection.autoconnect │ │
832 ├────────────┼───────────────────────────┼─────────────────────────────┤
833 │ifname │ connection.interface-name │ A value of * will be │
834 │ │ │ interpreted as no value, │
835 │ │ │ making the connection │
836 │ │ │ profile │
837 │ │ │ interface-independent. │
838 │ │ │ Note: use quotes around * │
839 │ │ │ to suppress shell │
840 │ │ │ expansion. For bond, team │
841 │ │ │ and bridge connections a │
842 │ │ │ default name will be │
843 │ │ │ generated if not set. │
844 ├────────────┼───────────────────────────┼─────────────────────────────┤
845 │master │ connection.master │ Value specified here will │
846 │ │ │ be canonicalized. It can │
847 │ │ │ be prefixed with ifname/, │
848 │ │ │ uuid/ or id/ to │
849 │ │ │ disambiguate it. │
850 ├────────────┼───────────────────────────┼─────────────────────────────┤
851 │slave-type │ connection.slave-type │ │
852 └────────────┴───────────────────────────┴─────────────────────────────┘
853 Table 2. PPPoE options
855 ┌─────────┬────────────────┐
856 │Alias │ Property │
857 ├─────────┼────────────────┤
858 │username │ pppoe.username │
859 ├─────────┼────────────────┤
860 │password │ pppoe.password │
861 ├─────────┼────────────────┤
862 │service │ pppoe.service │
863 ├─────────┼────────────────┤
864 │parent │ pppoe.parent │
865 └─────────┴────────────────┘
866 Table 3. Wired Ethernet options
868 ┌───────────┬──────────────────────────┐
869 │Alias │ Property │
870 ├───────────┼──────────────────────────┤
871 │mtu │ wired.mtu │
872 ├───────────┼──────────────────────────┤
873 │mac │ wired.mac-address │
874 ├───────────┼──────────────────────────┤
875 │cloned-mac │ wired.cloned-mac-address │
876 └───────────┴──────────────────────────┘
877 Table 4. Infiniband options
879 ┌───────────────┬───────────────────────────┐
880 │Alias │ Property │
881 ├───────────────┼───────────────────────────┤
882 │mtu │ infiniband.mtu │
883 ├───────────────┼───────────────────────────┤
884 │mac │ infiniband.mac-address │
885 ├───────────────┼───────────────────────────┤
886 │transport-mode │ infiniband.transport-mode │
887 ├───────────────┼───────────────────────────┤
888 │parent │ infiniband.parent │
889 ├───────────────┼───────────────────────────┤
890 │p-key │ infiniband.p-key │
891 └───────────────┴───────────────────────────┘
892 Table 5. Wi-Fi options
894 ┌───────────┬─────────────────────────────┐
895 │Alias │ Property │
896 ├───────────┼─────────────────────────────┤
897 │ssid │ wireless.ssid │
898 ├───────────┼─────────────────────────────┤
899 │mode │ wireless.mode │
900 ├───────────┼─────────────────────────────┤
901 │mtu │ wireless.mtu │
902 ├───────────┼─────────────────────────────┤
903 │mac │ wireless.mac-address │
904 ├───────────┼─────────────────────────────┤
905 │cloned-mac │ wireless.cloned-mac-address │
906 └───────────┴─────────────────────────────┘
907 Table 6. WiMax options
909 ┌──────┬────────────────────┐
910 │Alias │ Property │
911 ├──────┼────────────────────┤
912 │nsp │ wimax.network-name │
913 ├──────┼────────────────────┤
914 │mac │ wimax.mac-address │
915 └──────┴────────────────────┘
916 Table 7. GSM options
918 ┌─────────┬──────────────┐
919 │Alias │ Property │
920 ├─────────┼──────────────┤
921 │apn │ gsm.apn │
922 ├─────────┼──────────────┤
923 │user │ gsm.username │
924 ├─────────┼──────────────┤
925 │password │ gsm.password │
926 └─────────┴──────────────┘
927 Table 8. CDMA options
929 ┌─────────┬───────────────┐
930 │Alias │ Property │
931 ├─────────┼───────────────┤
932 │user │ cdma.username │
933 ├─────────┼───────────────┤
934 │password │ cdma.password │
935 └─────────┴───────────────┘
936 Table 9. Bluetooth options
938 ┌────────┬──────────────────┬─────────────────────┐
939 │Alias │ Property │ Note │
940 ├────────┼──────────────────┼─────────────────────┤
941 │addr │ bluetooth.bdaddr │ │
942 ├────────┼──────────────────┼─────────────────────┤
943 │bt-type │ bluetooth.type │ Apart from the │
944 │ │ │ usual panu, nap and │
945 │ │ │ dun options, the │
946 │ │ │ values of dun-gsm │
947 │ │ │ and dun-cdma can be │
948 │ │ │ used for │
949 │ │ │ compatibility with │
950 │ │ │ older versions. │
951 │ │ │ They are equivalent │
952 │ │ │ to using dun and │
953 │ │ │ setting appropriate │
954 │ │ │ gsm.* or cdma.* │
955 │ │ │ properties. │
956 └────────┴──────────────────┴─────────────────────┘
957 Table 10. VLAN options
959 ┌────────┬───────────────────────────┐
960 │Alias │ Property │
961 ├────────┼───────────────────────────┤
962 │dev │ vlan.parent │
963 ├────────┼───────────────────────────┤
964 │id │ vlan.id │
965 ├────────┼───────────────────────────┤
966 │flags │ vlan.flags │
967 ├────────┼───────────────────────────┤
968 │ingress │ vlan.ingress-priority-map │
969 ├────────┼───────────────────────────┤
970 │egress │ vlan.egress-priority-map │
971 └────────┴───────────────────────────┘
972 Table 11. Bonding options
974 ┌──────────────┬──────────────┬───────────────────┐
975 │Alias │ Property │ Note │
976 ├──────────────┼──────────────┼───────────────────┤
977 │mode │ │ Setting each of │
978 ├──────────────┤ │ these adds the │
979 │primary │ │ option to │
980 ├──────────────┤ │ bond.options │
981 │miimon │ │ property. It's │
982 ├──────────────┤ │ equivalent to the │
983 │downdelay │ │ +bond.options │
984 ├──────────────┤ bond.options │ 'option=value' │
985 │updelay │ │ syntax. │
986 ├──────────────┤ │ │
987 │arp-interval │ │ │
988 ├──────────────┤ │ │
989 │arp-ip-target │ │ │
990 ├──────────────┤ │ │
991 │lacp-rate │ │ │
992 └──────────────┴──────────────┴───────────────────┘
993 Table 12. Team options
995 ┌───────┬─────────────┬────────────────────┐
996 │Alias │ Property │ Note │
997 ├───────┼─────────────┼────────────────────┤
998 │config │ team.config │ Either a filename │
999 │ │ │ or a team │
1000 │ │ │ configuration in │
1001 │ │ │ JSON format. To │
1002 │ │ │ enforce one or the │
1003 │ │ │ other, the value │
1004 │ │ │ can be prefixed │
1005 │ │ │ with "file://" or │
1006 │ │ │ "json://". │
1007 └───────┴─────────────┴────────────────────┘
1008 Table 13. Team port options
1010 ┌───────┬──────────────────┬────────────────────┐
1011 │Alias │ Property │ Note │
1012 ├───────┼──────────────────┼────────────────────┤
1013 │config │ team-port.config │ Either a filename │
1014 │ │ │ or a team │
1015 │ │ │ configuration in │
1016 │ │ │ JSON format. To │
1017 │ │ │ enforce one or the │
1018 │ │ │ other, the value │
1019 │ │ │ can be prefixed │
1020 │ │ │ with "file://" or │
1021 │ │ │ "json://". │
1022 └───────┴──────────────────┴────────────────────┘
1023 Table 14. Bridge options
1025 ┌───────────────────┬───────────────────────────┐
1026 │Alias │ Property │
1027 ├───────────────────┼───────────────────────────┤
1028 │stp │ bridge.stp │
1029 ├───────────────────┼───────────────────────────┤
1030 │priority │ bridge.priority │
1031 ├───────────────────┼───────────────────────────┤
1032 │forward-delay │ bridge.forward-delay │
1033 ├───────────────────┼───────────────────────────┤
1034 │hello-time │ bridge.hello-time │
1035 ├───────────────────┼───────────────────────────┤
1036 │max-age │ bridge.max-age │
1037 ├───────────────────┼───────────────────────────┤
1038 │ageing-time │ bridge.ageing-time │
1039 ├───────────────────┼───────────────────────────┤
1040 │group-forward-mask │ bridge.group-forward-mask │
1041 ├───────────────────┼───────────────────────────┤
1042 │multicast-snooping │ bridge.multicast-snooping │
1043 ├───────────────────┼───────────────────────────┤
1044 │mac │ bridge.mac-address │
1045 ├───────────────────┼───────────────────────────┤
1046 │priority │ bridge-port.priority │
1047 ├───────────────────┼───────────────────────────┤
1048 │path-cost │ bridge-port.path-cost │
1049 ├───────────────────┼───────────────────────────┤
1050 │hairpin │ bridge-port.hairpin-mode │
1051 └───────────────────┴───────────────────────────┘
1052 Table 15. VPN options
1054 ┌─────────┬──────────────────┐
1055 │Alias │ Property │
1056 ├─────────┼──────────────────┤
1057 │vpn-type │ vpn.service-type │
1058 ├─────────┼──────────────────┤
1059 │user │ vpn.user-name │
1060 └─────────┴──────────────────┘
1061 Table 16. OLPC Mesh options
1063 ┌─────────────┬────────────────────────────────┐
1064 │Alias │ Property │
1065 ├─────────────┼────────────────────────────────┤
1066 │ssid │ olpc-mesh.ssid │
1067 ├─────────────┼────────────────────────────────┤
1068 │channel │ olpc-mesh.channel │
1069 ├─────────────┼────────────────────────────────┤
1070 │dhcp-anycast │ olpc-mesh.dhcp-anycast-address │
1071 └─────────────┴────────────────────────────────┘
1072 Table 17. ADSL options
1074 ┌──────────────┬────────────────────┐
1075 │Alias │ Property │
1076 ├──────────────┼────────────────────┤
1077 │username │ adsl.username │
1078 ├──────────────┼────────────────────┤
1079 │protocol │ adsl.protocol │
1080 ├──────────────┼────────────────────┤
1081 │password │ adsl.password │
1082 ├──────────────┼────────────────────┤
1083 │encapsulation │ adsl.encapsulation │
1084 └──────────────┴────────────────────┘
1085 Table 18. MACVLAN options
1087 ┌──────┬────────────────┐
1088 │Alias │ Property │
1089 ├──────┼────────────────┤
1090 │dev │ macvlan.parent │
1091 ├──────┼────────────────┤
1092 │mode │ macvlan.mode │
1093 ├──────┼────────────────┤
1094 │tap │ macvlan.tap │
1095 └──────┴────────────────┘
1096 Table 19. MACsec options
1098 ┌────────┬────────────────┐
1099 │Alias │ Property │
1100 ├────────┼────────────────┤
1101 │dev │ macsec.parent │
1102 ├────────┼────────────────┤
1103 │mode │ macsec.mode │
1104 ├────────┼────────────────┤
1105 │encrypt │ macsec.encrypt │
1106 ├────────┼────────────────┤
1107 │cak │ macsec.cak │
1108 ├────────┼────────────────┤
1109 │ckn │ macsec.ckn │
1110 ├────────┼────────────────┤
1111 │port │ macsec.port │
1112 └────────┴────────────────┘
1113 Table 20. VxLAN options
1115 ┌─────────────────┬────────────────────────┐
1116 │Alias │ Property │
1117 ├─────────────────┼────────────────────────┤
1118 │id │ vxlan.id │
1119 ├─────────────────┼────────────────────────┤
1120 │remote │ vxlan.remote │
1121 ├─────────────────┼────────────────────────┤
1122 │dev │ vxlan.parent │
1123 ├─────────────────┼────────────────────────┤
1124 │local │ vxlan.local │
1125 ├─────────────────┼────────────────────────┤
1126 │source-port-min │ vxlan.source-port-min │
1127 ├─────────────────┼────────────────────────┤
1128 │source-port-max │ vxlan.source-port-max │
1129 ├─────────────────┼────────────────────────┤
1130 │destination-port │ vxlan.destination-port │
1131 └─────────────────┴────────────────────────┘
1132 Table 21. Tun options
1134 ┌────────────┬─────────────────┐
1135 │Alias │ Property │
1136 ├────────────┼─────────────────┤
1137 │mode │ tun.mode │
1138 ├────────────┼─────────────────┤
1139 │owner │ tun.owner │
1140 ├────────────┼─────────────────┤
1141 │group │ tun.group │
1142 ├────────────┼─────────────────┤
1143 │pi │ tun.pi │
1144 ├────────────┼─────────────────┤
1145 │vnet-hdr │ tun.vnet-hdr │
1146 ├────────────┼─────────────────┤
1147 │multi-queue │ tun.multi-queue │
1148 └────────────┴─────────────────┘
1149 Table 22. IP tunneling options
1151 ┌───────┬──────────────────┐
1152 │Alias │ Property │
1153 ├───────┼──────────────────┤
1154 │mode │ ip-tunnel.mode │
1155 ├───────┼──────────────────┤
1156 │local │ ip-tunnel.local │
1157 ├───────┼──────────────────┤
1158 │remote │ ip-tunnel.remote │
1159 ├───────┼──────────────────┤
1160 │dev │ ip-tunnel.parent │
1161 └───────┴──────────────────┘
1162 Table 23. IPv4 options
1164 ┌──────┬────────────────┬─────────────────────┐
1165 │Alias │ Property │ Note │
1166 ├──────┼────────────────┼─────────────────────┤
1167 │ip4 │ ipv4.addresses │ The alias is │
1168 │ │ ipv4.method │ equivalent to the │
1169 │ │ │ +ipv4.addresses │
1170 │ │ │ syntax and also │
1171 │ │ │ sets ipv4.method to │
1172 │ │ │ manual. It can be │
1173 │ │ │ specified multiple │
1174 │ │ │ times. │
1175 ├──────┼────────────────┼─────────────────────┤
1176 │gw4 │ ipv4.gateway │ │
1177 └──────┴────────────────┴─────────────────────┘
1178 Table 24. IPv6 options
1180 ┌──────┬────────────────┬─────────────────────┐
1181 │Alias │ Property │ Note │
1182 ├──────┼────────────────┼─────────────────────┤
1183 │ip6 │ ipv6.addresses │ The alias is │
1184 │ │ ipv6.method │ equivalent to the │
1185 │ │ │ +ipv6.addresses │
1186 │ │ │ syntax and also │
1187 │ │ │ sets ipv6.method to │
1188 │ │ │ manual. It can be │
1189 │ │ │ specified multiple │
1190 │ │ │ times. │
1191 ├──────┼────────────────┼─────────────────────┤
1192 │gw6 │ ipv6.gateway │ │
1193 └──────┴────────────────┴─────────────────────┘
1194 Table 25. Proxy options
1196 ┌─────────────┬────────────────────┬─────────────────────┐
1197 │Alias │ Property │ Note │
1198 ├─────────────┼────────────────────┼─────────────────────┤
1199 │method │ proxy.method │ │
1200 ├─────────────┼────────────────────┼─────────────────────┤
1201 │browser-only │ proxy.browser-only │ │
1202 ├─────────────┼────────────────────┼─────────────────────┤
1203 │pac-url │ proxy.pac-url │ │
1204 ├─────────────┼────────────────────┼─────────────────────┤
1205 │pac-script │ proxy.pac-script │ Read the JavaScript │
1206 │ │ │ PAC (proxy │
1207 │ │ │ auto-config) script │
1208 │ │ │ from file or pass │
1209 │ │ │ it directly on the │
1210 │ │ │ command line. │
1211 │ │ │ Prefix the value │
1212 │ │ │ with "file://" or │
1213 │ │ │ "js://" to force │
1214 │ │ │ one or the other. │
1215 └─────────────┴────────────────────┴─────────────────────┘
1216
1218 Implicit coloring can be disabled by an empty file
1219 /etc/terminal-colors.d/nmcli.disable.
1220 See terminal-colors.d(5) for more details about colorization
1222 configuration. The logical color names supported by nmcli are:
1223 connection-activated
1225 A connection that is active.
1226 connection-activating
1228 Connection that is being activated.
1229 connection-disconnecting
1231 Connection that is being disconnected.
1232 connection-invisible
1234 Connection whose details is the user not permitted to see.
1235 connectivity-full
1237 Conectivity state when Internet is reachable.
1238 connectivity-limited
1240 Conectivity state when only a local network reachable.
1241 connectivity-none
1243 Conectivity state when the network is disconnected.
1244 connectivity-portal
1246 Conectivity state when a captive portal hijacked the connection.
1247 connectivity-unknown
1249 Conectivity state when a connectivity check didn't run.
1250 device-activated
1252 Device that is connected.
1253 device-activating
1255 Device that is being configured.
1256 device-disconnected
1258 Device that is not connected.
1259 device-firmware-missing
1261 Warning of a missing device firmware.
1262 device-plugin-missing
1264 Warning of a missing device plugin.
1265 device-unavailable
1267 Device that is not available for activation.
1268 manager-running
1270 Notice that the NetworkManager daemon is available.
1271 manager-starting
1273 Notice that the NetworkManager daemon is being initially connected.
1274 manager-stopped
1276 Notice that the NetworkManager daemon is not available.
1277 permission-auth
1279 An action that requires user authentication to get permission.
1280 permission-no
1282 An action that is not permitted.
1283 permission-yes
1285 An action that is permitted.
1286 prompt
1288 Prompt in interactive mode.
1289 state-asleep
1291 Indication that NetworkManager in suspended state.
1292 state-connected-global
1294 Indication that NetworkManager in connected to Internet.
1295 state-connected-local
1297 Indication that NetworkManager in local network.
1298 state-connected-site
1300 Indication that NetworkManager in connected to networks other than
1301 Internet.
1302 state-connecting
1304 Indication that NetworkManager is establishing a network
1305 connection.
1306 state-disconnected
1308 Indication that NetworkManager is disconnected from a network.
1309 state-disconnecting
1311 Indication that NetworkManager is being disconnected from a
1312 network.
1313 wifi-signal-excellent
1315 Wi-Fi network with an excellent signal level.
1316 wifi-signal-fair
1318 Wi-Fi network with a fair signal level.
1319 wifi-signal-good
1321 Wi-Fi network with a good signal level.
1322 wifi-signal-poor
1324 Wi-Fi network with a poor signal level.
1325 wifi-signal-unknown
1327 Wi-Fi network that hasn't been actually seen (a hidden AP).
1328 disabled
1330 A property that is turned off.
1331 enabled
1333 A property that is turned on.
1334
1336 nmcli's behavior is affected by the following environment variables.
1337 LC_ALL
1339 If set to a non-empty string value, it overrides the values of all
1340 the other internationalization variables.
1341 LC_MESSAGES
1343 Determines the locale to be used for internationalized messages.
1344 LANG
1346 Provides a default value for the internationalization variables
1347 that are unset or null.
1348
1350 Be aware that nmcli is localized and that is why the output depends on
1351 your environment. This is important to realize especially when you
1352 parse the output.
1353 Call nmcli as LC_ALL=C nmcli to be sure the locale is set to C while
1355 executing in a script.
1356 LC_ALL, LC_MESSAGES, LANG variables specify the LC_MESSAGES locale
1358 category (in that order), which determines the language that nmcli uses
1359 for messages. The C locale is used if none of these variables are set,
1360 and this locale uses English messages.
1361
1363 nmcli exits with status 0 if it succeeds, a value greater than 0 is
1364 returned if an error occurs.
1365 0
1367 Success – indicates the operation succeeded.
1368 1
1370 Unknown or unspecified error.
1371 2
1373 Invalid user input, wrong nmcli invocation.
1374 3
1376 Timeout expired (see --wait option).
1377 4
1379 Connection activation failed.
1380 5
1382 Connection deactivation failed.
1383 6
1385 Disconnecting device failed.
1386 7
1388 Connection deletion failed.
1389 8
1391 NetworkManager is not running.
1392 10
1394 Connection, device, or access point does not exist.
1395 65
1397 When used with --complete-args option, a file name is expected to
1398 follow.
1399
1401 This section presents various examples of nmcli usage. If you want even
1402 more, please refer to nmcli-examples(7) manual page.
1403 nmcli -t -f RUNNING general
1405 tells you whether NetworkManager is running or not.
1406 nmcli -t -f STATE general
1408 shows the overall status of NetworkManager.
1409 nmcli radio wifi off
1411 switches Wi-Fi off.
1412 nmcli connection show
1414 lists all connections NetworkManager has.
1415 nmcli -p -m multiline -f all con show
1417 shows all configured connections in multi-line mode.
1418 nmcli connection show --active
1420 lists all currently active connections.
1421 nmcli -f name,autoconnect c s
1423 shows all connection profile names and their auto-connect property.
1424 nmcli -p connection show "My default em1"
1426 shows details for "My default em1" connection profile.
1427 nmcli --show-secrets connection show "My Home WiFi"
1429 shows details for "My Home WiFi" connection profile with all
1430 passwords. Without --show-secrets option, secrets would not be
1431 displayed.
1432 nmcli -f active connection show "My default em1"
1434 shows details for "My default em1" active connection, like IP, DHCP
1435 information, etc.
1436 nmcli -f profile con s "My wired connection"
1438 shows static configuration details of the connection profile with
1439 "My wired connection" name.
1440 nmcli -p con up "My wired connection" ifname eth0
1442 activates the connection profile with name "My wired connection" on
1443 interface eth0. The -p option makes nmcli show progress of the
1444 activation.
1445 nmcli con up 6b028a27-6dc9-4411-9886-e9ad1dd43761 ap 00:3A:98:7C:42:D3
1447 connects the Wi-Fi connection with UUID
1448 6b028a27-6dc9-4411-9886-e9ad1dd43761 to the AP with BSSID
1449 00:3A:98:7C:42:D3.
1450 nmcli device status
1452 shows the status for all devices.
1453 nmcli dev disconnect em2
1455 disconnects a connection on interface em2 and marks the device as
1456 unavailable for auto-connecting. As a result, no connection will
1457 automatically be activated on the device until the device's
1458 'autoconnect' is set to TRUE or the user manually activates a
1459 connection.
1460 nmcli -f GENERAL,WIFI-PROPERTIES dev show wlan0
1462 shows details for wlan0 interface; only GENERAL and WIFI-PROPERTIES
1463 sections will be shown.
1464 nmcli -f CONNECTIONS device show wlp3s0
1466 shows all available connection profiles for your Wi-Fi interface
1467 wlp3s0.
1468 nmcli dev wifi
1470 lists available Wi-Fi access points known to NetworkManager.
1471 nmcli dev wifi con "Cafe Hotspot 1" password caffeine name "My cafe"
1473 creates a new connection named "My cafe" and then connects it to
1474 "Cafe Hotspot 1" SSID using password "caffeine". This is mainly
1475 useful when connecting to "Cafe Hotspot 1" for the first time. Next
1476 time, it is better to use nmcli con up id "My cafe" so that the
1477 existing connection profile can be used and no additional is
1478 created.
1479 nmcli -s dev wifi hotspot con-name QuickHotspot
1481 creates a hotspot profile and connects it. Prints the hotspot
1482 password the user should use to connect to the hotspot from other
1483 devices.
1484 nmcli dev modify em1 ipv4.method shared
1486 starts IPv4 connection sharing using em1 device. The sharing will
1487 be active until the device is disconnected.
1488 nmcli dev modify em1 ipv6.address 2001:db8::a:bad:c0de
1490 temporarily adds an IP address to a device. The address will be
1491 removed when the same connection is activated again.
1492 nmcli connection add type ethernet autoconnect no ifname eth0
1494 non-interactively adds an Ethernet connection tied to eth0
1495 interface with automatic IP configuration (DHCP), and disables the
1496 connection's autoconnect flag.
1497 nmcli c a ifname Maxipes-fik type vlan dev eth0 id 55
1499 non-interactively adds a VLAN connection with ID 55. The connection
1500 will use eth0 and the VLAN interface will be named Maxipes-fik.
1501 nmcli c a ifname eth0 type ethernet ipv4.method disabled ipv6.method
1503 link-local
1504 non-interactively adds a connection that will use eth0 Ethernet
1505 interface and only have an IPv6 link-local address configured.
1506 nmcli connection edit ethernet-em1-2
1508 edits existing "ethernet-em1-2" connection in the interactive
1509 editor.
1510 nmcli connection edit type ethernet con-name "yet another Ethernet
1512 connection"
1513 adds a new Ethernet connection in the interactive editor.
1514 nmcli con mod ethernet-2 connection.autoconnect no
1516 modifies 'autoconnect' property in the 'connection' setting of
1517 'ethernet-2' connection.
1518 nmcli con mod "Home Wi-Fi" wifi.mtu 1350
1520 modifies 'mtu' property in the 'wifi' setting of 'Home Wi-Fi'
1521 connection.
1522 nmcli con mod em1-1 ipv4.method manual ipv4.addr "192.168.1.23/24
1524 192.168.1.1, 10.10.1.5/8, 10.0.0.11"
1525 sets manual addressing and the addresses in em1-1 profile.
1526 nmcli con modify ABC +ipv4.dns 8.8.8.8
1528 appends a Google public DNS server to DNS servers in ABC profile.
1529 nmcli con modify ABC -ipv4.addresses "192.168.100.25/24 192.168.1.1"
1531 removes the specified IP address from (static) profile ABC.
1532 nmcli con import type openvpn file ~/Downloads/frootvpn.ovpn
1534 imports an OpenVPN configuration to NetworkManager.
1535 nmcli con export corp-vpnc /home/joe/corpvpn.conf
1537 exports NetworkManager VPN profile corp-vpnc as standard Cisco
1538 (vpnc) configuration.
1539
1541 nmcli accepts abbreviations, as long as they are a unique prefix in the
1542 set of possible options. As new options get added, these abbreviations
1543 are not guaranteed to stay unique. For scripting and long term
1544 compatibility it is therefore strongly advised to spell out the full
1545 option names.
1546
1548 There are probably some bugs. If you find a bug, please report it to
1549 https://bugzilla.gnome.org/ — product NetworkManager.
1550
1552 nmcli-examples(7), nm-online(1), NetworkManager(8),
1553 NetworkManager.conf(5), nm-settings(5), nm-applet(1), nm-connection-
1554 editor(1), terminal-colors.d(5).
1555NetworkManager 1.12.6 NMCLI(1)