1NTLM_AUTH(1) User Commands NTLM_AUTH(1)
2
6 ntlm_auth - tool to allow external access to Winbind's NTLM
7 authentication function
8
10 ntlm_auth
11
13 This tool is part of the samba(7) suite.
14 ntlm_auth is a helper utility that authenticates users using NT/LM
16 authentication. It returns 0 if the users is authenticated successfully
17 and 1 if access was denied. ntlm_auth uses winbind to access the user
18 and authentication data for a domain. This utility is only intended to
19 be used by other programs (currently Squid and mod_ntlm_winbind)
20
22 The winbindd(8) daemon must be operational for many of these commands
23 to function.
24 Some of these commands also require access to the directory
26 winbindd_privileged in $LOCKDIR. This should be done either by running
27 this command as root or providing group access to the
28 winbindd_privileged directory. For security reasons, this directory
29 should not be world-accessable.
30
32 --helper-protocol=PROTO
33 Operate as a stdio-based helper. Valid helper protocols are:
34 squid-2.4-basic
36 Server-side helper for use with Squid 2.4's basic (plaintext)
37 authentication.
38 squid-2.5-basic
40 Server-side helper for use with Squid 2.5's basic (plaintext)
41 authentication.
42 squid-2.5-ntlmssp
44 Server-side helper for use with Squid 2.5's NTLMSSP
45 authentication.
46 Requires access to the directory winbindd_privileged in
48 $LOCKDIR. The protocol used is described here:
49 http://devel.squid-cache.org/ntlm/squid_helper_protocol.html.
50 This protocol has been extended to allow the NTLMSSP Negotiate
51 packet to be included as an argument to the YR command. (Thus
52 avoiding loss of information in the protocol exchange).
53 ntlmssp-client-1
55 Client-side helper for use with arbitrary external programs
56 that may wish to use Samba's NTLMSSP authentication knowledge.
57 This helper is a client, and as such may be run by any user.
59 The protocol used is effectively the reverse of the previous
60 protocol. A YR command (without any arguments) starts the
61 authentication exchange.
62 gss-spnego
64 Server-side helper that implements GSS-SPNEGO. This uses a
65 protocol that is almost the same as squid-2.5-ntlmssp, but has
66 some subtle differences that are undocumented outside the
67 source at this stage.
68 Requires access to the directory winbindd_privileged in
70 $LOCKDIR.
71 gss-spnego-client
73 Client-side helper that implements GSS-SPNEGO. This also uses a
74 protocol similar to the above helpers, but is currently
75 undocumented.
76 ntlm-server-1
78 Server-side helper protocol, intended for use by a RADIUS
79 server or the 'winbind' plugin for pppd, for the provision of
80 MSCHAP and MSCHAPv2 authentication.
81 This protocol consists of lines in the form: Parameter: value
83 and Parameter:: Base64-encode value. The presence of a single
84 period . indicates that one side has finished supplying data
85 to the other. (Which in turn could cause the helper to
86 authenticate the user).
87 Currently implemented parameters from the external program to
89 the helper are:
90 Username
92 The username, expected to be in Samba's unix charset.
93 Examples:
95 Username: bob
96 Username:: Ym9i
98 NT-Domain
100 The user's domain, expected to be in Samba's unix charset.
101 Examples:
103 NT-Domain: WORKGROUP
104 NT-Domain:: V09SS0dST1VQ
106 Full-Username
108 The fully qualified username, expected to be in Samba's
109 unix charset and qualified with the winbind separator.
110 Examples:
112 Full-Username: WORKGROUP\bob
113 Full-Username:: V09SS0dST1VQYm9i
115 LANMAN-Challenge
117 The 8 byte LANMAN Challenge value, generated randomly by
118 the server, or (in cases such as MSCHAPv2) generated in
119 some way by both the server and the client.
120 Examples:
122 LANMAN-Challenge: 0102030405060708
123 LANMAN-Response
125 The 24 byte LANMAN Response value, calculated from the
126 user's password and the supplied LANMAN Challenge.
127 Typically, this is provided over the network by a client
128 wishing to authenticate.
129 Examples:
131 LANMAN-Response:
132 0102030405060708090A0B0C0D0E0F101112131415161718
133 NT-Response
135 The >= 24 byte NT Response calculated from the user's
136 password and the supplied LANMAN Challenge. Typically, this
137 is provided over the network by a client wishing to
138 authenticate.
139 Examples:
141 NT-Response:
142 0102030405060708090A0B0C0D0E0F10111213141516171
143 Password
145 The user's password. This would be provided by a network
146 client, if the helper is being used in a legacy situation
147 that exposes plaintext passwords in this way.
148 Examples:
150 Password: samba2
151 Password:: c2FtYmEy
153 Request-User-Session-Key
155 Upon successful authentication, return the user session key
156 associated with the login.
157 Examples:
159 Request-User-Session-Key: Yes
160 Request-LanMan-Session-Key
162 Upon successful authentication, return the LANMAN session
163 key associated with the login.
164 Examples:
166 Request-LanMan-Session-Key: Yes
167 Warning
170 Implementers should take care to base64 encode any data (such
171 as usernames/passwords) that may contain malicious user data,
172 such as a newline. They may also need to decode strings from
173 the helper, which likewise may have been base64 encoded.
174 --username=USERNAME
176 Specify username of user to authenticate
177 --domain=DOMAIN
179 Specify domain of user to authenticate
180 --workstation=WORKSTATION
182 Specify the workstation the user authenticated from
183 --challenge=STRING
185 NTLM challenge (in HEXADECIMAL)
186 --lm-response=RESPONSE
188 LM Response to the challenge (in HEXADECIMAL)
189 --nt-response=RESPONSE
191 NT or NTLMv2 Response to the challenge (in HEXADECIMAL)
192 --password=PASSWORD
194 User's plaintext password
195 If not specified on the command line, this is prompted for when
197 required.
198 For the NTLMSSP based server roles, this parameter specifies the
200 expected password, allowing testing without winbindd operational.
201 --request-lm-key
203 Retrieve LM session key
204 --request-nt-key
206 Request NT key
207 --diagnostics
209 Perform Diagnostics on the authentication chain. Uses the password
210 from --password or prompts for one.
211 --require-membership-of={SID|Name}
213 Require that a user be a member of specified group (either name or
214 SID) for authentication to succeed.
215 --pam-winbind-conf=FILENAME
217 Define the path to the pam_winbind.conf file.
218 --target-hostname=HOSTNAME
220 Define the target hostname.
221 --target-service=SERVICE
223 Define the target service.
224 --use-cached-creds
226 Whether to use credentials cached by winbindd.
227 --allow-mschapv2
229 Explicitly allow MSCHAPv2.
230 --offline-logon
232 Allow offline logons for plain text auth.
233 --configfile=<configuration file>
235 The file specified contains the configuration details required by
236 the server. The information in this file includes server-specific
237 information such as what printcap file to use, as well as
238 descriptions of all the services that the server is to provide. See
239 smb.conf for more information. The default configuration file name
240 is determined at compile time.
241 -V|--version
243 Prints the program version number.
244 -?|--help
246 Print a summary of command line options.
247 --usage
249 Display brief usage message.
250
252 To setup ntlm_auth for use by squid 2.5, with both basic and NTLMSSP
253 authentication, the following should be placed in the squid.conf file.
254 auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp
256 auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic
257 auth_param basic children 5
258 auth_param basic realm Squid proxy-caching web server
259 auth_param basic credentialsttl 2 hours
260 Note
262 This example assumes that ntlm_auth has been installed into your
263 path, and that the group permissions on winbindd_privileged are as
264 described above.
265 To setup ntlm_auth for use by squid 2.5 with group limitation in
267 addition to the above example, the following should be added to the
268 squid.conf file.
269 auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp --require-membership-of='WORKGROUP\Domain Users'
271 auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic --require-membership-of='WORKGROUP\Domain Users'
272
274 If you're experiencing problems with authenticating Internet Explorer
275 running under MS Windows 9X or Millennium Edition against ntlm_auth's
276 NTLMSSP authentication helper (--helper-protocol=squid-2.5-ntlmssp),
277 then please read the Microsoft Knowledge Base article #239869 and
278 follow instructions described there.
279
281 This man page is part of version 4.9.8 of the Samba suite.
282
284 The original Samba software and related utilities were created by
285 Andrew Tridgell. Samba is now developed by the Samba Team as an Open
286 Source project similar to the way the Linux kernel is developed.
287 The ntlm_auth manpage was written by Jelmer Vernooij and Andrew
289 Bartlett.
290Samba 4.9.8 05/14/2019 NTLM_AUTH(1)