1LDAP_BIND(3) Library Functions Manual LDAP_BIND(3)
2
6 ldap_bind, ldap_bind_s, ldap_simple_bind, ldap_simple_bind_s,
7 ldap_sasl_bind, ldap_sasl_bind_s, ldap_sasl_interactive_bind_s,
8 ldap_parse_sasl_bind_result, ldap_unbind, ldap_unbind_s,
9 ldap_unbind_ext, ldap_unbind_ext_s, ldap_set_rebind_proc - LDAP bind
10 routines
11
13 OpenLDAP LDAP (libldap, -lldap)
14
16 #include <ldap.h>
17 int ldap_bind(LDAP *ld, const char *who, const char *cred,
19 int method);
20 int ldap_bind_s(LDAP *ld, const char *who, const char *cred,
22 int method);
23 int ldap_simple_bind(LDAP *ld, const char *who, const char *passwd);
25 int ldap_simple_bind_s(LDAP *ld, const char *who, const char *passwd);
27 int ldap_sasl_bind(LDAP *ld, const char *dn, const char *mechanism,
29 struct berval *cred, LDAPControl *sctrls[],
30 LDAPControl *cctrls[], int *msgidp);
31 int ldap_sasl_bind_s(LDAP *ld, const char *dn, const char *mechanism,
33 struct berval *cred, LDAPControl *sctrls[],
34 LDAPControl *cctrls[], struct berval **servercredp);
35 int ldap_parse_sasl_bind_result(LDAP *ld, LDAPMessage *res,
37 struct berval **servercredp, int freeit);
38 int ldap_sasl_interactive_bind_s(LDAP *ld, const char *dn,
40 const char *mechs,
41 LDAPControl *sctrls[], LDAPControl *cctrls[],
42 unsigned flags, LDAP_SASL_INTERACT_PROC *interact,
43 void *defaults);
44 int ldap_sasl_interactive_bind(LDAP *ld, const char *dn,
46 const char *mechs,
47 LDAPControl *sctrls[], LDAPControl *cctrls[],
48 unsigned flags, LDAP_SASL_INTERACT_PROC *interact,
49 void *defaults, LDAPMessage *result,
50 const char **rmechp, int *msgidp);
51 int (LDAP_SASL_INTERACT_PROC)(LDAP *ld, unsigned flags, void *defaults, void *sasl_interact);
53 int ldap_unbind(LDAP *ld);
55 int ldap_unbind_s(LDAP *ld);
57 int ldap_unbind_ext(LDAP *ld, LDAPControl *sctrls[],
59 LDAPControl *cctrls[]);
60 int ldap_unbind_ext_s(LDAP *ld, LDAPControl *sctrls[],
62 LDAPControl *cctrls[]);
63 int ldap_set_rebind_proc (LDAP *ld, LDAP_REBIND_PROC *ldap_proc, void *params);
65 int (LDAP_REBIND_PROC)(LDAP *ld, LDAP_CONST char *url, ber_tag_t request, ber_int_t msgid, void *params);
67
69 These routines provide various interfaces to the LDAP bind operation.
70 After an association with an LDAP server is made using ldap_init(3), an
71 LDAP bind operation should be performed before other operations are
72 attempted over the connection. An LDAP bind is required when using
73 Version 2 of the LDAP protocol; it is optional for Version 3 but is
74 usually needed due to security considerations.
75 There are three types of bind calls, ones providing simple authentica‐
77 tion, ones providing SASL authentication, and general routines capable
78 of doing either simple or SASL authentication.
79 SASL (Simple Authentication and Security Layer) can negotiate one of
81 many different kinds of authentication. Both synchronous and asynchro‐
82 nous versions of each variant of the bind call are provided. All rou‐
83 tines take ld as their first parameter, as returned from ldap_init(3).
84
86 The simplest form of the bind call is ldap_simple_bind_s(). It takes
87 the DN to bind as in who, and the userPassword associated with the
88 entry in passwd. It returns an LDAP error indication (see
89 ldap_error(3)). The ldap_simple_bind() call is asynchronous, taking
90 the same parameters but only initiating the bind operation and return‐
91 ing the message id of the request it sent. The result of the operation
92 can be obtained by a subsequent call to ldap_result(3). The
93 ldap_sasl_bind_s() and asynchronous ldap_sasl_bind() functions can also
94 be used to make a simple bind by using LDAP_SASL_SIMPLE as the SASL
95 mechanism.
96
98 The ldap_bind() and ldap_bind_s() routines can be used when the authen‐
99 tication method to use needs to be selected at runtime. They both take
100 an extra method parameter selecting the authentication method to use.
101 It should be set to LDAP_AUTH_SIMPLE to select simple authentication.
102 ldap_bind() returns the message id of the request it initiates.
103 ldap_bind_s() returns an LDAP error indication.
104
106 For SASL binds the server always ignores any provided DN, so the dn
107 parameter should always be NULL. ldap_sasl_bind_s() sends a single
108 SASL bind request with the given SASL mechanism and credentials in the
109 cred parameter. The format of the credentials depends on the particular
110 SASL mechanism in use. For mechanisms that provide mutual authentica‐
111 tion the server's credentials will be returned in the servercredp
112 parameter. The routine returns an LDAP error indication (see
113 ldap_error(3)). The ldap_sasl_bind() call is asynchronous, taking the
114 same parameters but only sending the request and returning the message
115 id of the request it sent. The result of the operation can be obtained
116 by a subsequent call to ldap_result(3). The result must be addition‐
117 ally parsed by ldap_parse_sasl_bind_result() to obtain any server cre‐
118 dentials sent from the server.
119 Many SASL mechanisms require multiple message exchanges to perform a
121 complete authentication. Applications should generally use
122 ldap_sasl_interactive_bind_s() rather than calling the basic
123 ldap_sasl_bind() functions directly. The mechs parameter should contain
124 a space-separated list of candidate mechanisms to use. If this parame‐
125 ter is NULL or empty the library will query the supportedSASLMechanisms
126 attribute from the server's rootDSE for the list of SASL mechanisms the
127 server supports. The flags parameter controls the interaction used to
128 retrieve any necessary SASL authentication parameters and should be one
129 of:
130 LDAP_SASL_AUTOMATIC
132 use defaults if available, prompt otherwise
133 LDAP_SASL_INTERACTIVE
135 always prompt
136 LDAP_SASL_QUIET
138 never prompt
139 The interact function uses the provided defaults to handle requests
141 from the SASL library for particular authentication parameters. There
142 is no defined format for the defaults information; it is up to the
143 caller to use whatever format is appropriate for the supplied interact
144 function. The sasl_interact parameter comes from the underlying SASL
145 library. When used with Cyrus SASL this is an array of sasl_interact_t
146 structures. The Cyrus SASL library will prompt for a variety of inputs,
147 including:
148 SASL_CB_GETREALM
150 the realm for the authentication attempt
151 SASL_CB_AUTHNAME
153 the username to authenticate
154 SASL_CB_PASS
156 the password for the provided username
157 SASL_CB_USER
159 the username to use for proxy authorization
160 SASL_CB_NOECHOPROMPT
162 generic prompt for input with input echoing disabled
163 SASL_CB_ECHOPROMPT
165 generic prompt for input with input echoing enabled
166 SASL_CB_LIST_END
168 indicates the end of the array of prompts
169 See the Cyrus SASL documentation for more details.
171 Applications which need to manage connections asynchronously may use
173 ldap_sasl_interactive_bind() instead of the synchronous version. A
174 valid mechs parameter must be supplied, otherwise the library will be
175 forced to query the server for a list of supported mechanisms, and this
176 query will be performed synchronously. The other parameters are the
177 same as for the synchronous function, with three additional parameters.
178 The actual SASL mechanism that was used, and the message ID for use
179 with ldap_result() will be returned in rmechp and msgidp, respectively.
180 The value in rmechp must not be modified by the caller and must be
181 passed back on each subsequent call. The message obtained from
182 ldap_result() must be passed in the result parameter. This parameter
183 must be NULL when initiating a new Bind. The caller must free the
184 result message after each call using ldap_msgfree(). The
185 ldap_sasl_interactive_bind() function returns an LDAP result code. If
186 the code is LDAP_SASL_BIND_IN_PROGRESS then the Bind is not complete
187 yet, and this function must be called again with the next result from
188 the server.
189
191 The ldap_set_rebind_proc function() sets the process to use for binding
192 when an operation returns a referral. This function is used when an
193 application needs to bind to another server in order to follow a refer‐
194 ral or search continuation reference.
195 The function takes ld, the rebind function, and the params, the arbi‐
197 trary data like state information which the client might need to prop‐
198 erly rebind. The LDAP_OPT_REFERRALS option in the ld must be set to ON
199 for the libraries to use the rebind function. Use the ldap_set_option
200 function to set the value.
201 The rebind function parameters are as follows:
203 The ld parameter must be used by the application when binding to the
205 referred server if the application wants the libraries to follow the
206 referral.
207 The url parameter points to the URL referral string received from the
209 LDAP server. The LDAP application can use the ldap_url_parse(3) func‐
210 tion to parse the string into its components.
211 The request parameter specifies the type of request that generated the
213 referral.
214 The msgid parameter specifies the message ID of the request generating
216 the referral.
217 The params parameter is the same value as passed originally to the
219 ldap_set_rebind_proc() function.
220 The LDAP libraries set all the parameters when they call the rebind
222 function. The application should not attempt to free either the ld or
223 the url structures in the rebind function.
224 The application must supply to the rebind function the required authen‐
226 tication information such as, user name, password, and certificates.
227 The rebind function must use a synchronous bind method.
228
230 The ldap_unbind() call is used to unbind from the directory, terminate
231 the current association, and free the resources contained in the ld
232 structure. Once it is called, the connection to the LDAP server is
233 closed, and the ld structure is invalid. The ldap_unbind_s() call is
234 just another name for ldap_unbind(); both of these calls are synchro‐
235 nous in nature.
236 The ldap_unbind_ext() and ldap_unbind_ext_s() allows the operations to
238 specify controls.
239
241 Asynchronous routines will return -1 in case of error, setting the
242 ld_errno parameter of the ld structure. Synchronous routines return
243 whatever ld_errno is set to. See ldap_error(3) for more information.
244
246 If an anonymous bind is sufficient for the application, the rebind
247 process need not be provided. The LDAP libraries with the
248 LDAP_OPT_REFERRALS option set to ON (default value) will automatically
249 follow referrals using an anonymous bind.
250 If the application needs stronger authentication than an anonymous
252 bind, you need to provide a rebind process for that authentication
253 method. The bind method must be synchronous.
254
256 ldap(3), ldap_error(3), ldap_open(3), ldap_set_option(3),
257 ldap_url_parse(3) RFC 4422 (http://www.rfc-editor.org), Cyrus SASL
258 (http://asg.web.cmu.edu/sasl/)
259
261 OpenLDAP Software is developed and maintained by The OpenLDAP Project
262 <http://www.openldap.org/>. OpenLDAP Software is derived from the Uni‐
263 versity of Michigan LDAP 3.3 Release.
264OpenLDAP 2.4.46 2018/03/22 LDAP_BIND(3)