1GETPRIORITY(3P) POSIX Programmer's Manual GETPRIORITY(3P)
2
3
4
6 This manual page is part of the POSIX Programmer's Manual. The Linux
7 implementation of this interface may differ (consult the corresponding
8 Linux manual page for details of Linux behavior), or the interface may
9 not be implemented on Linux.
10
11
13 getpriority, setpriority — get and set the nice value
14
16 #include <sys/resource.h>
17
18 int getpriority(int which, id_t who);
19 int setpriority(int which, id_t who, int value);
20
22 The getpriority() function shall obtain the nice value of a process,
23 process group, or user. The setpriority() function shall set the nice
24 value of a process, process group, or user to value+{NZERO}.
25
26 Target processes are specified by the values of the which and who argu‐
27 ments. The which argument may be one of the following values:
28 PRIO_PROCESS, PRIO_PGRP, or PRIO_USER, indicating that the who argument
29 is to be interpreted as a process ID, a process group ID, or an effec‐
30 tive user ID, respectively. A 0 value for the who argument specifies
31 the current process, process group, or user.
32
33 The nice value set with setpriority() shall be applied to the process.
34 If the process is multi-threaded, the nice value shall affect all sys‐
35 tem scope threads in the process.
36
37 If more than one process is specified, getpriority() shall return value
38 {NZERO} less than the lowest nice value pertaining to any of the speci‐
39 fied processes, and setpriority() shall set the nice values of all of
40 the specified processes to value+{NZERO}.
41
42 The default nice value is {NZERO}; lower nice values shall cause more
43 favorable scheduling. While the range of valid nice values is
44 [0,{NZERO}*2−1], implementations may enforce more restrictive limits.
45 If value+{NZERO} is less than the system's lowest supported nice value,
46 setpriority() shall set the nice value to the lowest supported value;
47 if value+{NZERO} is greater than the system's highest supported nice
48 value, setpriority() shall set the nice value to the highest supported
49 value.
50
51 Only a process with appropriate privileges can lower its nice value.
52
53 Any processes or threads using SCHED_FIFO or SCHED_RR shall be unaf‐
54 fected by a call to setpriority(). This is not considered an error. A
55 process which subsequently reverts to SCHED_OTHER need not have its
56 priority affected by such a setpriority() call.
57
58 The effect of changing the nice value may vary depending on the
59 process-scheduling algorithm in effect.
60
61 Since getpriority() can return the value −1 upon successful completion,
62 it is necessary to set errno to 0 prior to a call to getpriority(). If
63 getpriority() returns the value −1, then errno can be checked to see if
64 an error occurred or if the value is a legitimate nice value.
65
67 Upon successful completion, getpriority() shall return an integer in
68 the range −{NZERO} to {NZERO}−1. Otherwise, −1 shall be returned and
69 errno set to indicate the error.
70
71 Upon successful completion, setpriority() shall return 0; otherwise, −1
72 shall be returned and errno set to indicate the error.
73
75 The getpriority() and setpriority() functions shall fail if:
76
77 ESRCH No process could be located using the which and who argument
78 values specified.
79
80 EINVAL The value of the which argument was not recognized, or the value
81 of the who argument is not a valid process ID, process group ID,
82 or user ID.
83
84 In addition, setpriority() may fail if:
85
86 EPERM A process was located, but neither the real nor effective user
87 ID of the executing process match the effective user ID of the
88 process whose nice value is being changed.
89
90 EACCES A request was made to change the nice value to a lower numeric
91 value and the current process does not have appropriate privi‐
92 leges.
93
94 The following sections are informative.
95
97 Using getpriority()
98 The following example returns the current scheduling priority for the
99 process ID returned by the call to getpid().
100
101 #include <sys/resource.h>
102 ...
103 int which = PRIO_PROCESS;
104 id_t pid;
105 int ret;
106
107 pid = getpid();
108 ret = getpriority(which, pid);
109
110 Using setpriority()
111 The following example sets the priority for the current process ID to
112 −20.
113
114 #include <sys/resource.h>
115 ...
116 int which = PRIO_PROCESS;
117 id_t pid;
118 int priority = -20;
119 int ret;
120
121 pid = getpid();
122 ret = setpriority(which, pid, priority);
123
125 The getpriority() and setpriority() functions work with an offset nice
126 value (nice value −{NZERO}). The nice value is in the range
127 [0,2*{NZERO} −1], while the return value for getpriority() and the
128 third parameter for setpriority() are in the range [−{NZERO},{NZERO}
129 −1].
130
132 None.
133
135 None.
136
138 nice(), sched_get_priority_max(), sched_setscheduler()
139
140 The Base Definitions volume of POSIX.1‐2008, <sys_resource.h>
141
143 Portions of this text are reprinted and reproduced in electronic form
144 from IEEE Std 1003.1, 2013 Edition, Standard for Information Technology
145 -- Portable Operating System Interface (POSIX), The Open Group Base
146 Specifications Issue 7, Copyright (C) 2013 by the Institute of Electri‐
147 cal and Electronics Engineers, Inc and The Open Group. (This is
148 POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the
149 event of any discrepancy between this version and the original IEEE and
150 The Open Group Standard, the original IEEE and The Open Group Standard
151 is the referee document. The original Standard can be obtained online
152 at http://www.unix.org/online.html .
153
154 Any typographical or formatting errors that appear in this page are
155 most likely to have been introduced during the conversion of the source
156 files to man page format. To report such errors, see https://www.ker‐
157 nel.org/doc/man-pages/reporting_bugs.html .
158
159
160
161IEEE/The Open Group 2013 GETPRIORITY(3P)