1CPAN::FirstTime(3) User Contributed Perl Documentation CPAN::FirstTime(3)
2
6 CPAN::FirstTime - Utility for CPAN::Config file Initialization
7
9 CPAN::FirstTime::init()
10
12 The init routine asks a few questions and writes a CPAN/Config.pm or
13 CPAN/MyConfig.pm file (depending on what it is currently using).
14 In the following all questions and explanations regarding config
16 variables are collected.
17 auto_commit
19 Normally CPAN.pm keeps config variables in memory and changes need to
20 be saved in a separate 'o conf commit' command to make them permanent
21 between sessions. If you set the 'auto_commit' option to true,
22 changes to a config variable are always automatically committed to
23 disk.
24 Always commit changes to config variables to disk?
26 build_cache
28 CPAN.pm can limit the size of the disk area for keeping the build
29 directories with all the intermediate files.
30 Cache size for build directory (in MB)?
32 build_dir
34 Directory where the build process takes place?
35 build_dir_reuse
37 Until version 1.88 CPAN.pm never trusted the contents of the
38 build_dir directory between sessions. Since 1.88_58 CPAN.pm has a
39 YAML-based mechanism that makes it possible to share the contents of
40 the build_dir/ directory between different sessions with the same
41 version of perl. People who prefer to test things several days before
42 installing will like this feature because it saves a lot of time.
43 If you say yes to the following question, CPAN will try to store
45 enough information about the build process so that it can pick up in
46 future sessions at the same state of affairs as it left a previous
47 session.
48 Store and re-use state information about distributions between
50 CPAN.pm sessions?
51 build_requires_install_policy
53 When a module declares another one as a 'build_requires' prerequisite
54 this means that the other module is only needed for building or
55 testing the module but need not be installed permanently. In this
56 case you may wish to install that other module nonetheless or just
57 keep it in the 'build_dir' directory to have it available only
58 temporarily. Installing saves time on future installations but makes
59 the perl installation bigger.
60 You can choose if you want to always install (yes), never install
62 (no) or be always asked. In the latter case you can set the default
63 answer for the question to yes (ask/yes) or no (ask/no).
64 Policy on installing 'build_requires' modules (yes, no, ask/yes,
66 ask/no)?
67 cache_metadata
69 To considerably speed up the initial CPAN shell startup, it is
70 possible to use Storable to create a cache of metadata. If Storable
71 is not available, the normal index mechanism will be used.
72 Note: this mechanism is not used when use_sqlite is on and SQLLite is
74 running.
75 Cache metadata (yes/no)?
77 check_sigs
79 CPAN packages can be digitally signed by authors and thus verified
80 with the security provided by strong cryptography. The exact
81 mechanism is defined in the Module::Signature module. While this is
82 generally considered a good thing, it is not always convenient to the
83 end user to install modules that are signed incorrectly or where the
84 key of the author is not available or where some prerequisite for
85 Module::Signature has a bug and so on.
86 With the check_sigs parameter you can turn signature checking on and
88 off. The default is off for now because the whole tool chain for the
89 functionality is not yet considered mature by some. The author of
90 CPAN.pm would recommend setting it to true most of the time and
91 turning it off only if it turns out to be annoying.
92 Note that if you do not have Module::Signature installed, no
94 signature checks will be performed at all.
95 Always try to check and verify signatures if a SIGNATURE file is in
97 the package and Module::Signature is installed (yes/no)?
98 cleanup_after_install
100 Users who install modules and do not intend to look back, can free
101 occupied disk space quickly by letting CPAN.pm cleanup each build
102 directory immediately after a successful install.
103 Remove build directory after a successful install? (yes/no)?
105 colorize_output
107 When you have Term::ANSIColor installed, you can turn on colorized
108 output to have some visual differences between normal CPAN.pm output,
109 warnings, debugging output, and the output of the modules being
110 installed. Set your favorite colors after some experimenting with the
111 Term::ANSIColor module.
112 Please note that on Windows platforms colorized output also requires
114 the Win32::Console::ANSI module.
115 Do you want to turn on colored output?
117 colorize_print
119 Color for normal output?
120 colorize_warn
122 Color for warnings?
123 colorize_debug
125 Color for debugging messages?
126 commandnumber_in_prompt
128 The prompt of the cpan shell can contain the current command number
129 for easier tracking of the session or be a plain string.
130 Do you want the command number in the prompt (yes/no)?
132 connect_to_internet_ok
134 If you have never defined your own "urllist" in your configuration
135 then "CPAN.pm" will be hesitant to use the built in default sites for
136 downloading. It will ask you once per session if a connection to the
137 internet is OK and only if you say yes, it will try to connect. But
138 to avoid this question, you can choose your favorite download sites
139 once and get away with it. Or, if you have no favorite download sites
140 answer yes to the following question.
141 If no urllist has been chosen yet, would you prefer CPAN.pm to
143 connect to the built-in default sites without asking? (yes/no)?
144 ftp_passive
146 Shall we always set the FTP_PASSIVE environment variable when dealing
147 with ftp download (yes/no)?
148 ftpstats_period
150 Statistics about downloads are truncated by size and period
151 simultaneously.
152 How many days shall we keep statistics about downloads?
154 ftpstats_size
156 Statistics about downloads are truncated by size and period
157 simultaneously.
158 How many items shall we keep in the statistics about downloads?
160 getcwd
162 CPAN.pm changes the current working directory often and needs to
163 determine its own current working directory. Per default it uses
164 Cwd::cwd but if this doesn't work on your system for some reason,
165 alternatives can be configured according to the following table:
166 cwd Cwd::cwd
168 getcwd Cwd::getcwd
169 fastcwd Cwd::fastcwd
170 getdcwd Cwd::getdcwd
171 backtickcwd external command cwd
172 Preferred method for determining the current working directory?
174 halt_on_failure
176 Normally, CPAN.pm continues processing the full list of targets and
177 dependencies, even if one of them fails. However, you can specify
178 that CPAN should halt after the first failure. (Note that optional
179 recommended or suggested modules that fail will not cause a halt.)
180 Do you want to halt on failure (yes/no)?
182 histfile
184 If you have one of the readline packages (Term::ReadLine::Perl,
185 Term::ReadLine::Gnu, possibly others) installed, the interactive CPAN
186 shell will have history support. The next two questions deal with the
187 filename of the history file and with its size. If you do not want to
188 set this variable, please hit SPACE ENTER to the following question.
189 File to save your history?
191 histsize
193 Number of lines to save?
194 inactivity_timeout
196 Sometimes you may wish to leave the processes run by CPAN alone
197 without caring about them. Because the Makefile.PL or the Build.PL
198 sometimes contains question you're expected to answer, you can set a
199 timer that will kill a 'perl Makefile.PL' process after the specified
200 time in seconds.
201 If you set this value to 0, these processes will wait forever. This
203 is the default and recommended setting.
204 Timeout for inactivity during {Makefile,Build}.PL?
206 index_expire
208 The CPAN indexes are usually rebuilt once or twice per hour, but the
209 typical CPAN mirror mirrors only once or twice per day. Depending on
210 the quality of your mirror and your desire to be on the bleeding
211 edge, you may want to set the following value to more or less than
212 one day (which is the default). It determines after how many days
213 CPAN.pm downloads new indexes.
214 Let the index expire after how many days?
216 inhibit_startup_message
218 When the CPAN shell is started it normally displays a greeting
219 message that contains the running version and the status of readline
220 support.
221 Do you want to turn this message off?
223 keep_source_where
225 Unless you are accessing the CPAN on your filesystem via a file: URL,
226 CPAN.pm needs to keep the source files it downloads somewhere. Please
227 supply a directory where the downloaded files are to be kept.
228 Download target directory?
230 load_module_verbosity
232 When CPAN.pm loads a module it needs for some optional feature, it
233 usually reports about module name and version. Choose 'v' to get this
234 message, 'none' to suppress it.
235 Verbosity level for loading modules (none or v)?
237 makepl_arg
239 Every Makefile.PL is run by perl in a separate process. Likewise we
240 run 'make' and 'make install' in separate processes. If you have any
241 parameters (e.g. PREFIX, UNINST or the like) you want to pass to the
242 calls, please specify them here.
243 If you don't understand this question, just press ENTER.
245 Typical frequently used settings:
247 PREFIX=~/perl # non-root users (please see manual for more hints)
249 Parameters for the 'perl Makefile.PL' command?
251 make_arg
253 Parameters for the 'make' command? Typical frequently used setting:
254 -j3 # dual processor system (on GNU make)
256 Your choice:
258 make_install_arg
260 Parameters for the 'make install' command? Typical frequently used
261 setting:
262 UNINST=1 # to always uninstall potentially conflicting files
264 # (but do NOT use with local::lib or INSTALL_BASE)
265 Your choice:
267 make_install_make_command
269 Do you want to use a different make command for 'make install'?
270 Cautious people will probably prefer:
271 su root -c make
273 or
274 sudo make
275 or
276 /path1/to/sudo -u admin_account /path2/to/make
277 or some such. Your choice:
279 mbuildpl_arg
281 A Build.PL is run by perl in a separate process. Likewise we run
282 './Build' and './Build install' in separate processes. If you have
283 any parameters you want to pass to the calls, please specify them
284 here.
285 Typical frequently used settings:
287 --install_base /home/xxx # different installation directory
289 Parameters for the 'perl Build.PL' command?
291 mbuild_arg
293 Parameters for the './Build' command? Setting might be:
294 --extra_linker_flags -L/usr/foo/lib # non-standard library location
296 Your choice:
298 mbuild_install_arg
300 Parameters for the './Build install' command? Typical frequently used
301 setting:
302 --uninst 1 # uninstall conflicting files
304 # (but do NOT use with local::lib or INSTALL_BASE)
305 Your choice:
307 mbuild_install_build_command
309 Do you want to use a different command for './Build install'? Sudo
310 users will probably prefer:
311 su root -c ./Build
313 or
314 sudo ./Build
315 or
316 /path1/to/sudo -u admin_account ./Build
317 or some such. Your choice:
319 pager
321 What is your favorite pager program?
322 prefer_installer
324 When you have Module::Build installed and a module comes with both a
325 Makefile.PL and a Build.PL, which shall have precedence?
326 The main two standard installer modules are the old and well
328 established ExtUtils::MakeMaker (for short: EUMM) which uses the
329 Makefile.PL. And the next generation installer Module::Build (MB)
330 which works with the Build.PL (and often comes with a Makefile.PL
331 too). If a module comes only with one of the two we will use that one
332 but if both are supplied then a decision must be made between EUMM
333 and MB. See also http://rt.cpan.org/Ticket/Display.html?id=29235 for
334 a discussion about the right default.
335 Or, as a third option you can choose RAND which will make a random
337 decision (something regular CPAN testers will enjoy).
338 In case you can choose between running a Makefile.PL or a Build.PL,
340 which installer would you prefer (EUMM or MB or RAND)?
341 prefs_dir
343 CPAN.pm can store customized build environments based on regular
344 expressions for distribution names. These are YAML files where the
345 default options for CPAN.pm and the environment can be overridden and
346 dialog sequences can be stored that can later be executed by an
347 Expect.pm object. The CPAN.pm distribution comes with some prefab
348 YAML files that cover sample distributions that can be used as
349 blueprints to store your own prefs. Please check out the distroprefs/
350 directory of the CPAN.pm distribution to get a quick start into the
351 prefs system.
352 Directory where to store default options/environment/dialogs for
354 building modules that need some customization?
355 prerequisites_policy
357 The CPAN module can detect when a module which you are trying to
358 build depends on prerequisites. If this happens, it can build the
359 prerequisites for you automatically ('follow'), ask you for
360 confirmation ('ask'), or just ignore them ('ignore'). Choosing
361 'follow' also sets PERL_AUTOINSTALL and PERL_EXTUTILS_AUTOINSTALL for
362 "--defaultdeps" if not already set.
363 Please set your policy to one of the three values.
365 Policy on building prerequisites (follow, ask or ignore)?
367 randomize_urllist
369 CPAN.pm can introduce some randomness when using hosts for download
370 that are configured in the urllist parameter. Enter a numeric value
371 between 0 and 1 to indicate how often you want to let CPAN.pm try a
372 random host from the urllist. A value of one specifies to always use
373 a random host as the first try. A value of zero means no randomness
374 at all. Anything in between specifies how often, on average, a random
375 host should be tried first.
376 Randomize parameter
378 recommends_policy
380 (Experimental feature!) Some CPAN modules recommend additional,
381 optional dependencies. These should generally be installed except in
382 resource constrained environments. When this policy is true,
383 recommended modules will be included with required modules.
384 Include recommended modules?
386 scan_cache
388 By default, each time the CPAN module is started, cache scanning is
389 performed to keep the cache size in sync ('atstart'). Alternatively,
390 scanning and cleanup can happen when CPAN exits ('atexit'). To
391 prevent any cache cleanup, answer 'never'.
392 Perform cache scanning ('atstart', 'atexit' or 'never')?
394 shell
396 What is your favorite shell?
397 show_unparsable_versions
399 During the 'r' command CPAN.pm finds modules without version number.
400 When the command finishes, it prints a report about this. If you want
401 this report to be very verbose, say yes to the following variable.
402 Show all individual modules that have no $VERSION?
404 show_upload_date
406 The 'd' and the 'm' command normally only show you information they
407 have in their in-memory database and thus will never connect to the
408 internet. If you set the 'show_upload_date' variable to true, 'm' and
409 'd' will additionally show you the upload date of the module or
410 distribution. Per default this feature is off because it may require
411 a net connection to get at the upload date.
412 Always try to show upload date with 'd' and 'm' command (yes/no)?
414 show_zero_versions
416 During the 'r' command CPAN.pm finds modules with a version number of
417 zero. When the command finishes, it prints a report about this. If
418 you want this report to be very verbose, say yes to the following
419 variable.
420 Show all individual modules that have a $VERSION of zero?
422 suggests_policy
424 (Experimental feature!) Some CPAN modules suggest additional,
425 optional dependencies. These 'suggest' dependencies provide enhanced
426 operation. When this policy is true, suggested modules will be
427 included with required modules.
428 Include suggested modules?
430 tar_verbosity
432 When CPAN.pm uses the tar command, which switch for the verbosity
433 shall be used? Choose 'none' for quiet operation, 'v' for file name
434 listing, 'vv' for full listing.
435 Tar command verbosity level (none or v or vv)?
437 term_is_latin
439 The next option deals with the charset (a.k.a. character set) your
440 terminal supports. In general, CPAN is English speaking territory, so
441 the charset does not matter much but some CPAN have names that are
442 outside the ASCII range. If your terminal supports UTF-8, you should
443 say no to the next question. If it expects ISO-8859-1 (also known as
444 LATIN1) then you should say yes. If it supports neither, your answer
445 does not matter because you will not be able to read the names of
446 some authors anyway. If you answer no, names will be output in UTF-8.
447 Your terminal expects ISO-8859-1 (yes/no)?
449 term_ornaments
451 When using Term::ReadLine, you can turn ornaments on so that your
452 input stands out against the output from CPAN.pm.
453 Do you want to turn ornaments on?
455 test_report
457 The goal of the CPAN Testers project (http://testers.cpan.org/) is to
458 test as many CPAN packages as possible on as many platforms as
459 possible. This provides valuable feedback to module authors and
460 potential users to identify bugs or platform compatibility issues and
461 improves the overall quality and value of CPAN.
462 One way you can contribute is to send test results for each module
464 that you install. If you install the CPAN::Reporter module, you have
465 the option to automatically generate and deliver test reports to CPAN
466 Testers whenever you run tests on a CPAN package.
467 See the CPAN::Reporter documentation for additional details and
469 configuration settings. If your firewall blocks outgoing traffic,
470 you may need to configure CPAN::Reporter before sending reports.
471 Generate test reports if CPAN::Reporter is installed (yes/no)?
473 perl5lib_verbosity
475 When CPAN.pm extends @INC via PERL5LIB, it prints a list of
476 directories added (or a summary of how many directories are added).
477 Choose 'v' to get this message, 'none' to suppress it.
478 Verbosity level for PERL5LIB changes (none or v)?
480 prefer_external_tar
482 Per default all untar operations are done with the perl module
483 Archive::Tar; by setting this variable to true the external tar
484 command is used if available; on Unix this is usually preferred
485 because they have a reliable and fast gnutar implementation.
486 Use the external tar program instead of Archive::Tar?
488 trust_test_report_history
490 When a distribution has already been tested by CPAN::Reporter on this
491 machine, CPAN can skip the test phase and just rely on the test
492 report history instead.
493 Note that this will not apply to distributions that failed tests
495 because of missing dependencies. Also, tests can be run regardless
496 of the history using "force".
497 Do you want to rely on the test report history (yes/no)?
499 use_prompt_default
501 When this is true, CPAN will set PERL_MM_USE_DEFAULT to a true value.
502 This causes ExtUtils::MakeMaker (and compatible) prompts to use
503 default values instead of stopping to prompt you to answer questions.
504 It also sets NONINTERACTIVE_TESTING to a true value to signal more
505 generally that distributions should not try to interact with you.
506 Do you want to use prompt defaults (yes/no)?
508 use_sqlite
510 CPAN::SQLite is a layer between the index files that are downloaded
511 from the CPAN and CPAN.pm that speeds up metadata queries and reduces
512 memory consumption of CPAN.pm considerably.
513 Use CPAN::SQLite if available? (yes/no)?
515 version_timeout
517 This timeout prevents CPAN from hanging when trying to parse a
518 pathologically coded $VERSION from a module.
519 The default is 15 seconds. If you set this value to 0, no timeout
521 will occur, but this is not recommended.
522 Timeout for parsing module versions?
524 yaml_load_code
526 Both YAML.pm and YAML::Syck are capable of deserialising code. As
527 this requires a string eval, which might be a security risk, you can
528 use this option to enable or disable the deserialisation of code via
529 CPAN::DeferredCode. (Note: This does not work under perl 5.6)
530 Do you want to enable code deserialisation (yes/no)?
532 yaml_module
534 At the time of this writing (2009-03) there are three YAML
535 implementations working: YAML, YAML::Syck, and YAML::XS. The latter
536 two are faster but need a C compiler installed on your system. There
537 may be more alternative YAML conforming modules. When I tried two
538 other players, YAML::Tiny and YAML::Perl, they seemed not powerful
539 enough to work with CPAN.pm. This may have changed in the meantime.
540 Which YAML implementation would you prefer?
542
544 This program is free software; you can redistribute it and/or modify it
545 under the same terms as Perl itself.
546perl v5.28.1 2019-03-19 CPAN::FirstTime(3)