1SNMP::Info::Layer3::BayURsSe(r3)Contributed Perl DocumenStNaMtPi:o:nInfo::Layer3::BayRS(3)
2
6 SNMP::Info::Layer3::BayRS - SNMP Interface to Avaya/Nortel routers
7 running BayRS.
8
10 Eric Miller
11
13 # Let SNMP::Info determine the correct subclass for you.
14 my $bayrs = new SNMP::Info(
15 AutoSpecify => 1,
16 Debug => 1,
17 DestHost => 'myswitch',
18 Community => 'public',
19 Version => 2
20 )
21 or die "Can't connect to DestHost.\n";
22 my $class = $bayrs->class();
24 print "SNMP::Info determined this device to fall under subclass : $class\n";
25
27 Abstraction subclass for routers running Avaya/Nortel BayRS.
28 For speed or debugging purposes you can call the subclass directly, but
30 not after determining a more specific class using the method above.
31 my $bayrs = new SNMP::Info::Layer3::BayRS(...);
33 Inherited Classes
35 SNMP::Info
36 SNMP::Info::Bridge
37 SNMP::Info::Layer3
38 Required MIBs
40 Wellfleet-HARDWARE-MIB
41 Wellfleet-MODULE-MIB
42 Wellfleet-OSPF-MIB
43 Wellfleet-DOT1QTAG-CONFIG-MIB
44 Wellfleet-CSMACD-MIB
45 Inherited MIBs
47 See "Required MIBs" in SNMP::Info for its own MIB requirements.
48 See "Required MIBs" in SNMP::Info::Bridge for its own MIB requirements.
50 See "Required MIBs" in SNMP::Info::Layer3 for its own MIB requirements.
52
54 These are methods that return scalar value from SNMP
55 $bayrs->model()
57 Returns the model of the BayRS router. Will translate between the
58 MIB model and the common model with this map :
59 C<%MODEL_MAP = (
61 'acefn' => 'FN',
62 'aceln' => 'LN',
63 'acecn' => 'CN',
64 'afn' => 'AFN',
65 'in' => 'IN',
66 'an' => 'AN',
67 'arn' => 'ARN',
68 'sys5000' => '5000',
69 'freln' => 'BLN',
70 'frecn' => 'BCN',
71 'frerbln' => 'BLN-2',
72 'asn' => 'ASN',
73 'asnzcable' => 'ASN-Z',
74 'asnbcable' => 'ASN-B',
75 );>
76 $bayrs->vendor()
78 Returns 'avaya'
79 $bayrs->os()
81 Returns 'bayrs'
82 $bayrs->os_ver()
84 Returns the software version extracted from "sysDescr"
85 $bayrs->serial()
87 Returns ("wfHwBpSerialNumber") after conversion to ASCII decimal
88 $bayrs->root_ip()
90 Returns the primary IP used to communicate with the router.
91 Returns the first found: CLIP (CircuitLess IP),
93 ("wfOspfRouterId"), or undefined.
94 Globals imported from SNMP::Info
96 See documentation in "GLOBALS" in SNMP::Info for details.
97 Globals imported from SNMP::Info::Bridge
99 See documentation in "GLOBALS" in SNMP::Info::Bridge for details.
100 Globals imported from SNMP::Info::Layer3
102 See documentation in "GLOBALS" in SNMP::Info::Layer3 for details.
103
105 These are methods that return tables of information in the form of a
106 reference to a hash.
107 Note: These methods do not support partial table fetches, a partial
109 can be passed but the entire table will be returned.
110 Overrides
112 $bayrs->interfaces()
113 Returns reference to the map between IID and physical Port.
114 The physical port name is stripped to letter and numbers to signify
116 port type and slot port (S11) if the default platform naming was
117 maintained. Otherwise the port is the interface description.
118 $bayrs->i_name()
120 Returns ("ifDescr") along with VLAN name ("wfDot1qTagCfgVlanName")
121 for VLAN interfaces.
122 $bayrs->i_duplex()
124 Returns reference to hash. Maps port operational duplexes to IIDs
125 for Ethernet interfaces.
126 $bayrs->i_duplex_admin()
128 Returns reference to hash. Maps port admin duplexes to IIDs for
129 Ethernet interfaces.
130 $bayrs->i_vlan()
132 Returns reference to hash. Maps port VLAN ID to IIDs.
133 $bayrs->i_pvid()
135 Returns reference to hash. Maps port VLAN ID to IIDs.
136 Pseudo ENTITY-MIB information
138 These methods emulate ENTITY-MIB Physical Table methods using
139 Wellfleet-HARDWARE-MIB and Wellfleet-MODULE-MIB.
140 $bayrs->e_index()
142 Returns reference to hash. Key and Value: Integer. The index is
143 created by combining the slot, module, and position into a five or
144 six digit integer. Slot can be either one or two digits while the
145 module and position are each two digits padded with leading zero if
146 required.
147 $bayrs->e_class()
149 Returns reference to hash. Key: IID, Value: General hardware type.
150 This class only returns container and module types.
151 $bayrs->e_descr()
153 Returns reference to hash. Key: IID, Value: Human friendly name.
154 $bayrs->e_name()
156 Returns reference to hash. Key: IID, Value: Human friendly name.
157 $bayrs->e_hwver()
159 Returns reference to hash. Key: IID, Value: Hardware version.
160 $bayrs->e_vendor()
162 Returns reference to hash. Key: IID, Value: avaya.
163 $bayrs->e_serial()
165 Returns reference to hash. Key: IID, Value: Serial number.
166 $bayrs->e_pos()
168 Returns reference to hash. Key: IID, Value: The relative position
169 among all entities sharing the same parent.
170 $bayrs->e_type()
172 Returns reference to hash. Key: IID, Value: Type of
173 component/sub-component as defined in Wellfleet-HARDWARE-MIB for
174 processors and link modules or Wellfleet-MODULE-MIB for hardware
175 modules.
176 $bayrs->e_fwver()
178 Returns reference to hash. Key: IID, Value: Firmware revision.
179 Only available on processors.
180 $bayrs->e_swver()
182 Returns reference to hash. Key: IID, Value: Software revision.
183 Only available on processors.
184 $bayrs->e_parent()
186 Returns reference to hash. Key: IID, Value: The value of e_index()
187 for the entity which 'contains' this entity. A value of zero
188 indicates this entity is not contained in any other entity.
189 Table Methods imported from SNMP::Info
191 See documentation in "TABLE METHODS" in SNMP::Info for details.
192 Table Methods imported from SNMP::Info::Bridge
194 See documentation in "TABLE METHODS" in SNMP::Info::Bridge for details.
195 Table Methods imported from SNMP::Info::Layer3
197 See documentation in "TABLE METHODS" in SNMP::Info::Layer3 for details.
198
200 $bayrs->munge_hw_rev()
201 Converts octets to a decimal major.minor string.
202 $bayrs->munge_wf_serial()
204 Coverts octets to a decimal string.
205perl v5.28.0 2018-11-29 SNMP::Info::Layer3::BayRS(3)