1WACOM(4) Kernel Interfaces Manual WACOM(4)
2
6 wacom - Wacom input driver
7
9 Section "InputDevice"
10 Identifier "idevname"
11 Driver "wacom"
12 Option "Device" "devpath"
13 ...
14 EndSection
15
17 wacom is an X input driver for Wacom devices.
18 The wacom driver functions as a pointer input device.
20
22 This driver supports the Wacom IV and Wacom V protocols. Serial tablets
23 only need this driver. USB tablet support is available on some Linux
24 platforms and requires the wacom kernel driver being loaded before this
25 driver starts.
26 Please check http://linuxwacom.sourceforge.net for latest updates of
28 Wacom X and kernel drivers.
29
31 When input device hotplugging in the X server is enabled and no Input‐
32 Device section exists for a compatible tablet device and an InputClass
33 section (see xorg.conf.d(5x)) assigns this driver for the device, the
34 wacom driver creates multiple X devices for each a physical device, one
35 X device for each available tool. The list of tools is hardware-depen‐
36 dent. See Option Type as outlined in the CONFIGURATION DETAILS section.
37 These tool-specific devices are referred to as parent device and depen‐
39 dent device. The parent device is the one presented by the system and
40 the one that causes the X server to load the wacom driver. This parent
41 device then causes the automatic addition of several dependent devices.
42 If the parent device is unplugged or otherwise removed, the dependent
43 devices will be automatically removed as well.
44 Dependent devices may be assigned tool-specific options through addi‐
46 tional InputClass sections. We recommend that a MatchDriver wacom line
47 is used in these sections in addition to the user-specific pattern.
48 Match directives are applied by the X server before the driver is
50 selected. The type name of the parent device is appended by the
51 driver. It is not possible to use a MatchProduct directive to match
52 against this appended type name.
53
55 Please refer to xorg.conf(5x) or xorg.conf.d(5x) for general configura‐
56 tion details and for options that can be used with all input drivers.
57 This section only covers configuration details specific to this driver.
58 Multiple instances of the Wacom devices can cohabit. Each device sup‐
60 ports the following entries:
61 Option "Type" "stylus"|"eraser"|"cursor"|"pad"|"touch"
63 sets the type of tool the device represents. This option is
64 mandatory. The core options, such as "SendCoreEvents" or
65 "AlwaysCore", are unnecessary in Gimp if you don't need to
66 move system cursor outside of Gimp drawing area. "pad" is
67 for Intuos 3 or Cintiq 21UX tablet ExpressKeys/menu strips,
68 and Graphire 4 or Bamboo tablet buttons, wheel, and/or
69 ring. It is required for Intuos3, CintiqV5, Graphire 4,
70 and Bamboo if you want to use keystroke features. "pad" is
71 reported as a second tool in the driver. "touch" is for the
72 tablet with touch support. Right now only a few Tablet PCs
73 have this feature.
74 Option "Device" "path"
76 sets the path to the special file which represents serial
77 line where the tablet is plugged. You have to specify it
78 for each subsection with the same value if you want to have
79 multiple devices with the same tablet. This option is
80 mandatory.
81 Option "Suppress" "number"
83 sets the position increment under which not to transmit
84 coordinates. This entry must be specified only in the
85 first Wacom subsection if you have multiple devices for one
86 tablet. If you don't specify this entry, the default value,
87 which is 2, will be used. To disable suppression, the entry
88 should be specified as 0. When suppress is defined, an
89 event will be sent only when at least one of the following
90 conditions is met:
91 the change between the current X coordinate and the
93 previous one is greater than suppress;
94 the change between the current Y coordinate and the
96 previous one is greater than suppress;
97 the change between the current pressure and the
99 previous one is greater than suppress;
100 the change between the current degree of rotation
102 and the previous one of the transducer is greater than sup‐
103 press;
104 the change between the current absolute wheel value
106 and the previous one is equal to or greater than suppress;
107 the change between the current tilt value and the
109 previous one is equal to or greater than suppress (if tilt
110 is supported);
111 relative wheel value has changed;
113 button value has changed;
115 proximity has changed.
117 Option "Mode" "Relative"|"Absolute"
119 sets the mode of the device. The default value for stylus,
120 pad and eraser is Absolute; cursor is Relative; touch
121 defaults to Relative for tablets with touch pads and Abso‐
122 lute for touch screens.
123 Option "TopX" "number"
125 X coordinate of the top corner of the active zone. Default
126 to 0.
127 Option "TopY" "number"
129 Y coordinate of the top corner of the active zone. Default
130 to 0.
131 Option "BottomX" "number"
133 X coordinate of the bottom corner of the active zone.
134 Default to width of the tablet.
135 Option "BottomY" "number"
137 Y coordinate of the bottom corner of the active zone.
138 Default to height of the tablet.
139 Option "ButtonsOnly" "on"|"off"
141 disables the device's motion events. Default to off.
142 Option "ButtonM" "AC"
144 reports an action AC when button M is pressed, where M is
145 one of the device supported button numbers, it can be 1
146 to 32. Wacom uses a driver-internal button mapping, where
147 any physical button appears to the X server as the button
148 specified by the ButtonM mapping. Hence, if two physical
149 buttons have the same ButtonM mapping, the server will
150 think they are the same physical button. The default
151 action reported to the X server is mouse button M click.
152 Because X uses buttons 4, 5, 6, and 7 as the four scrolling
153 directions, physical buttons 4 and higher are mapped to 8
154 and higher by default. Only simple button presses can be
155 configured here; for more complex actions, use xsetwa‐
156 com(1). To ignore the button click, i.e., to not report
157 any button click event to the X server, use "0" or "button
158 0".
159 Option "TPCButton" "on"|"off"
161 enables the stylus buttons as Tablet PC buttons. If
162 enabled, the stylus reports button events only when its tip
163 is pressed. If any button is down, pressing the tip reports
164 a button event for the button. Otherwise if no button is
165 down, the tip reports as usual. Default to "on" for Tablet
166 PCs; "off" for all other models. Only available on the sty‐
167 lus tool.
168 Option "Touch" "on"|"off"
170 enables touch events for touch devices, i.e., system cur‐
171 sor moves when user touches the tablet. Default to "on"
172 for devices that support touch; "off" for all other models.
173 Option "Rotate" "CW"|"CCW"|"HALF"|"NONE"
175 rotates the tablet orientation counterclockwise (CCW) or
176 clockwise (CW) or 180 degrees (HALF). If you have specific
177 tablet mappings, i.e. TopX/Y or BottomX/Y were set, the
178 mapping will be applied before rotation. Rotation must be
179 applied to the parent device (usually the stylus), rotation
180 settings on in-driver hotplugged devices (see DRIVER-INTER‐
181 NAL DEVICE HOTPLUGGING ) will be ignored. The default is
182 "NONE".
183 Option "PressCurve" "x1,y1,x2,y2"
185 sets pressure curve by control points x1, y1, x2, and y2.
186 Their values are in range from 0..100. The pressure curve
187 is interpreted as Bezier curve with 4 control points, the
188 first and the last control point being fixed on the coordi‐
189 nates 0/0 and 100/100, respectively. The middle control
190 points are adjustible by this setting and thus define the
191 shape of the curve. The input for linear curve (default)
192 is "0,0,100,100"; slightly depressed curve (firmer) might
193 be "5,0,100,95"; slightly raised curve (softer) might be
194 "0,5,95,100". The pressure curve is only applicable to
195 devices of type stylus or eraser, other devices do not
196 honor this setting.
197 Option "Pressure2K" "bool"
199 reduces the pressure range to the range of 0 to 2048 for
200 backwards compatibility with applications that have this
201 range hardcoded. See section BUGS. This option should not
202 be used unless the user runs one or more applications that
203 rely on a hardcoded pressure range.
204 Option "DebugLevel" "number"
206 sets the level of debugging info for tool-specific mes‐
207 sages. There are 12 levels, specified by the integers
208 between 1 and 12. All debug messages with a level less
209 than or equal to the "number" will be logged into the Xorg
210 log file. This option is only available if the driver was
211 built with debugging support.
212 Option "CommonDBG" "number"
214 sets the level of debugging info for common (i.e. not tool-
215 specific) code paths on the tablet. There are 12 levels,
216 specified by the integers between 1 and 12. All debug mes‐
217 sages with a level less than or equal to the "number" will
218 be logged into the Xorg log file. This option is only
219 available if the driver was built with debugging support.
220 Option "GrabDevice" "bool"
222 sets whether the underlying event device will be grabbed by
223 the driver to prevent the data from leaking to
224 /dev/input/mice. When enabled, while the X server is run‐
225 ning, no other programs will be able to read the event
226 stream. Default: "false".
227 Option "CursorProx" "number"
229 sets the max distance from tablet to stop reporting move‐
230 ment for the cursor. Default for Intuos series is 10, for
231 Graphire series (including Volitos) is 42. Only available
232 for the cursor/puck device.
233 Option "RawSample" "number"
235 Set the sample window size (a sliding average sampling
236 window) for incoming input tool raw data points. Default:
237 4, range of 1 to 20.
238 Option "Serial" "number"
240 sets the serial number associated with the physical device.
241 This allows to have multiple devices of the same type (i.e.
242 multiple pens). This option is only available on wacom V
243 devices (Intuos series and Cintiq 21U). To see which
244 serial number belongs to a device, you need to run the
245 utility program, xsetwacom, which comes with linuxwacom
246 package.
247 Option "ToolSerials" "number[,type[,label]][;...]"
249 sets the list of serial numbered devices that need to be
250 hotplugged for a physical device. The 'type' option may be
251 any of "pen", "airbrush", "artpen", or "cursor". This
252 option is only available on wacom V devices (Intuos series
253 and Cintiq 21U). To see which serial number belongs to a
254 device, you need to run the utility program, xsetwacom,
255 that comes with this driver.
256 Option "Threshold" "number"
258 sets the pressure threshold used to generate a button 1
259 events of stylus. The threshold applies to the normalised
260 pressure range of [0..2048]. The default is 27.
261 Option "Gesture" "bool"
263 Enable or disable multi-finger in-driver gesture support on
264 the device. Default: off unless the tablet supports multi-
265 touch. Note that disabling this option may allow the desk‐
266 top environment to detect multi-finger gestures instead.
267 Option "ZoomDistance" "number"
269 If Option "Gesture" is enabled, this option specifies the
270 minimum movement distance before a zoom gesture is recog‐
271 nized.
272 Option "ScrollDistance" "number"
274 If Option "Gesture" is enabled, this option specifies the
275 minimum movement distance before a scroll gesture is recog‐
276 nized.
277 Option "TapTime" "number"
279 If Option "Gesture" is enabled, this option determines the
280 maximum time of a touch event to be recognized as tap. A
281 press and release event shorter than TapTime generates but‐
282 ton press and release events. Presses longer than TapTime
283 do not generate button events, only motion events.
284 Option "PressureRecalibration" "bool"
286 Allows to disable pressure recalibration. Default: true.
287 If the initial pressure of a device is != 0 the driver
288 recalibrates the pressure range. This is to account for
289 worn out devices. The downside is that when the user hits
290 the tablet very hard the initial pressure reading may be
291 unequal to zero even for a perfectly good pen. If the con‐
292 secutive pressure readings are not higher than the initial
293 pressure by a threshold no button event will be generated.
294 This option allows to disable the recalibration.
295 Option "PanScrollThreshold" "number"
297 Specifies the distance the pen must move (in tablet units)
298 before a scroll event is generated when using the "pan"
299 action. Smaller values will require less distance and be
300 more sensitive. Larger values will require more distance
301 and be less sensitive. Default: 1300 or 2600 depending on
302 tablet resolution (corresponds to 13 mm of distance).
303
305 Single finger (1FG)
306 Left click: tap, actual click happens after TapTime period elapses.
307 Left click drag: tap to select, quickly (within TapTime period) touch
309 selection again. Then drag. Available on touchpads, e.g. BambooPT,
310 not touchscreens.
311 Two finger (2FG)
313 Right click: one finger down + tap second finger
314 Vertical scroll: two fingers side by side (in any orientation) moving
316 vertically with constant separation initiates a vertical scroll. By
317 driver default a gesture up results in a scroll down event (the docu‐
318 ment moves up) and a gesture down results in a scroll up event (moving
319 the document down).
320 Horizontal scroll: two fingers side by side held at a constant distance
322 moving horizontally initiates a horizontal scroll. A gesture to the
323 left results in a scroll right event (the document moves left) and a
324 gesture right results in a scroll left event (moving the document
325 right).
326 Zoom in: two separated fingers side by side, bring together i.e. pinch.
328 Zoom out: two fingers side by side, spread. Not all applications sup‐
330 port zoom.
331
333 Pressure range increase leads to unexpected behavior
334 In version 0.34, the driver's pressure range increased from 2048 steps
335 to 65536 steps. The pressure axis range is advertised through the X
336 Input Protocol but some applications have the previous pressure range
337 hardcoded and cannot handle pressure values above 2048. This is an
338 application bug but for backwards-compatibility with such applications,
339 this driver provides the Pressure2K option to reduce the range to 2048
340 steps. Note that this setting applies to the device. Once applied, all
341 applications will see the reduced pressure range. It is not possible to
342 provide this setting on a per-application basis.
343
345 Xorg(1), xorg.conf(5), xorg.conf.d(5), X(7)
346 More information is available at http://linuxwacom.sourceforge.net
348
350 Peter Hutterer <peter.hutterer@who-t.net>, Ping Cheng
351 <pingc@wacom.com>, Frederic Lepied <lepied@xfree86.org>, John E.
352 Joganic <jej@j-arkadia.com>, Magnus Vigerlöf <Magnus.Vigerlof@ipbo.se>
353X Version 11 xf86-input-wacom 0.36.1 WACOM(4)