1MAKEPKG(8) Pacman Manual MAKEPKG(8)
2
6 makepkg - package build utility
7
9 makepkg [options] [ENVVAR=value] [ENVVAR+=value] ...
10
12 makepkg is a script to automate the building of packages. The
13 requirements for using the script are a build-capable *nix platform and
14 a custom build script for each package you wish to build (known as a
15 PKGBUILD). See PKGBUILD(5) for details on creating your own build
16 scripts.
17 The advantage to a script-based build is that the work is only done
19 once. Once you have the build script for a package, makepkg will do the
20 rest: download and validate source files, check dependencies, configure
21 the build-time settings, build the package, install the package into a
22 temporary root, make customizations, generate meta-info, and package
23 the whole thing up for pacman to use.
24 Note
26 makepkg uses your current locale by default and does not unset it
27 when building packages. If you wish to share your build output with
28 others when seeking help or for other purposes, you may wish to run
29 "LC_ALL=C makepkg" so your logs and output are not localized.
30
32 -A, --ignorearch
33 Ignore a missing or incomplete arch field in the build script. This
34 is for rebuilding packages from source when the PKGBUILD may be
35 slightly outdated and not updated with an arch=('yourarch') field.
36 -c, --clean
38 Clean up leftover work files and directories after a successful
39 build.
40 --config <file>
42 Use an alternate configuration file instead of the
43 /etc/makepkg.conf default.
44 -d, --nodeps
46 Do not perform any dependency checks. This will let you override
47 and ignore any dependencies required. There is a good chance this
48 option will break the build process if all of the dependencies are
49 not installed.
50 -e, --noextract
52 Do not extract source files or run the prepare() function (if
53 present); use whatever source already exists in the $srcdir/
54 directory. This is handy if you want to go into $srcdir/ and
55 manually patch or tweak code, then make a package out of the
56 result. Keep in mind that creating a patch may be a better solution
57 to allow others to use your PKGBUILD.
58 --verifysource
60 For each source file in the source array of PKGBUILD, download the
61 file if required and perform the integrity checks. No extraction or
62 build is performed. Dependencies specified in the PKGBUILD will not
63 be handled unless --syncdeps is used. Useful for performing
64 subsequent offline builds.
65 -f, --force
67 makepkg will not build a package if a built package already exists
68 in the PKGDEST (set in makepkg.conf(5)) directory, which may
69 default to the current directory. This allows the built package to
70 be overwritten.
71 -g, --geninteg
73 For each source file in the source array of PKGBUILD, download the
74 file if required and generate integrity checks. The integrity
75 checks generated are determined by the checks present in the
76 PKGBUILD, falling back to the value of the INTEGRITY_CHECK array in
77 makepkg.conf(5) if these are absent This output can be redirected
78 into your PKGBUILD for source validation using "makepkg -g >>
79 PKGBUILD".
80 --skipinteg
82 Do not perform any integrity checks (checksum and PGP) on source
83 files.
84 --skipchecksums
86 Do not verify checksums of source files.
87 --skippgpcheck
89 Do not verify PGP signatures of source files.
90 -h, --help
92 Output syntax and command line options.
93 --holdver
95 When using VCS sources (PKGBUILD(5)) any currently checked out
96 source will not be updated to the latest revision.
97 -i, --install
99 Install or upgrade the package after a successful build using
100 pacman(8).
101 -L, --log
103 Enable logging. This will use the tee program to send the output of
104 each of the PKGBUILD functions to both the console and to a text
105 file in the build directory named
106 pkgbase-pkgver-pkgrel-arch-<function>.log. As mentioned above, the
107 logs will be localized so you may want to set your locale
108 accordingly if sharing the log output with others.
109 -m, --nocolor
111 Disable color in output messages.
112 -o, --nobuild
114 Download and extract files, run the prepare() function, but do not
115 build them. Useful with the --noextract option if you wish to tweak
116 the files in $srcdir/ before building.
117 -p <buildscript>
119 Read the package script buildscript instead of the PKGBUILD
120 default; see PKGBUILD(5). The buildscript must be located in the
121 directory makepkg is called from.
122 -r, --rmdeps
124 Upon successful build, remove any dependencies installed by makepkg
125 during dependency auto-resolution and installation when using -s.
126 -R, --repackage
128 Repackage contents of the package without rebuilding the package.
129 This is useful if you forgot, for example, a dependency or install
130 file in your PKGBUILD and the build itself will not change.
131 -s, --syncdeps
133 Install missing dependencies using pacman. When build-time or
134 run-time dependencies are not found, pacman will try to resolve
135 them. If successful, the missing packages will be downloaded and
136 installed.
137 -S, --source
139 Do not actually build the package, but build a source-only tarball
140 that does not include sources that can be fetched via a download
141 URL. This is useful for passing a single tarball to another program
142 such as a chroot, remote builder, or a tarball upload. Because
143 integrity checks are verified, all source files of the package need
144 to be present or downloadable.
145 -V, --version
147 Display version information.
148 -C, --cleanbuild
150 Remove the $srcdir before building the package.
151 --allsource
153 Do not actually build the package, but build a source-only tarball
154 that includes all sources, including those that are normally
155 downloaded via makepkg. This is useful for passing a single tarball
156 to another program such as a chroot or remote builder. It will also
157 satisfy requirements of the GPL when distributing binary packages.
158 --check
160 Run the check() function in the PKGBUILD, overriding the setting in
161 makepkg.conf(5).
162 --noarchive
164 Do not create the archive at the end of the build process. This can
165 be useful to test the package() function or if your target
166 distribution does not use pacman.
167 --nocheck
169 Do not run the check() function in the PKGBUILD or handle the
170 checkdepends.
171 --noprepare
173 Do not run the prepare() function in the PKGBUILD.
174 --sign
176 Sign the resulting package with gpg, overriding the setting in
177 makepkg.conf(5).
178 --nosign
180 Do not create a signature for the built package.
181 --key <key>
183 Specify a key to use when signing packages, overriding the GPGKEY
184 setting in makepkg.conf(5). If not specified in either location,
185 the default key from the keyring will be used.
186 --noconfirm
188 (Passed to pacman) Prevent pacman from waiting for user input
189 before proceeding with operations.
190 --needed
192 (Passed to pacman) Tell pacman not to reinstall a target if it is
193 already up-to-date. (used with -i / --install).
194 --asdeps
196 (Passed to pacman) Install packages as non-explicitly installed
197 (used with -i / --install).
198 --noprogressbar
200 (Passed to pacman) Prevent pacman from displaying a progress bar;
201 useful if you are redirecting makepkg output to file.
202 --packagelist
204 List the packages that would be produced without building. Listed
205 package names do not include PKGEXT.
206 --printsrcinfo
208 Generate and print the SRCINFO file to stdout.
209
211 makepkg supports building development versions of packages without
212 having to manually update the pkgver in the PKGBUILD. This was formerly
213 done using the separate utility versionpkg. See PKGBUILD(5) for details
214 on how to set up a development PKGBUILD.
215
217 PACMAN
218 The command that will be used to check for missing dependencies and
219 to install and remove packages. Pacman’s -Qq, -Rns, -S, -T, and -U
220 operations must be supported by this command. If the variable is
221 not set or empty, makepkg will fall back to ‘pacman’.
222 MAKEPKG_CONF="/path/to/file"
224 Use an alternate config file instead of the /etc/makepkg.conf
225 default.
226 PKGDEST="/path/to/directory"
228 Directory where the resulting packages will be stored. Overrides
229 the corresponding value defined in makepkg.conf(5).
230 SRCDEST="/path/to/directory"
232 Directory where the downloaded sources will be stored. Overrides
233 the corresponding value defined in makepkg.conf(5).
234 SRCPKGDEST="/path/to/directory"
236 Directory where source package files will be stored. Overrides the
237 corresponding value defined in makepkg.conf(5).
238 LOGDEST="/path/to/directory"
240 Directory where generated log files will be stored. Overrides the
241 corresponding value defined in makepkg.conf(5).
242 PACKAGER="John Doe <john@doe.com>"
244 String to identify the creator of the resulting package. Overrides
245 the corresponding value defined in makepkg.conf(5).
246 BUILDDIR="/path/to/directory"
248 Directory where the package will be built. Overrides the
249 corresponding value defined in makepkg.conf(5).
250 CARCH="(i686|x86_64)"
252 Force build for a specific architecture. Useful for
253 cross-compiling. Overrides the corresponding value defined in
254 makepkg.conf(5).
255 PKGEXT=".pkg.tar.gz", SRCEXT=".src.tar.gz"
257 Sets the compression used when making compiled or source packages.
258 Overrides the corresponding value defined in makepkg.conf(5).
259 GNUPGHOME="/path/to/directory"
261 Directory where the gpg keyring for signing the built package is
262 stored.
263 GPGKEY="keyid"
265 Specify a key to use when signing packages, overriding the GPGKEY
266 setting in makepkg.conf(5)
267
269 See makepkg.conf(5) for more details on configuring makepkg using the
270 makepkg.conf file.
271
273 makepkg.conf(5), PKGBUILD(5), pacman(8)
274 See the pacman website at https://www.archlinux.org/pacman/ for current
276 information on pacman and its related tools.
277
279 Bugs? You must be kidding; there are no bugs in this software. But if
280 we happen to be wrong, send us an email with as much detail as possible
281 to pacman-dev@archlinux.org.
282
284 Current maintainers:
285 · Allan McRae <allan@archlinux.org>
287 · Andrew Gregory <andrew.gregory.8@gmail.com>
289 · Dan McGee <dan@archlinux.org>
291 · Dave Reisner <dreisner@archlinux.org>
293 Past major contributors:
295 · Judd Vinet <jvinet@zeroflux.org>
297 · Aurelien Foret <aurelien@archlinux.org>
299 · Aaron Griffin <aaron@archlinux.org>
301 · Xavier Chantry <shiningxc@gmail.com>
303 · Nagy Gabor <ngaba@bibl.u-szeged.hu>
305 For additional contributors, use git shortlog -s on the pacman.git
307 repository.
308Pacman 5.0.2 2018-07-14 MAKEPKG(8)