1gl(3) Erlang Module Definition gl(3)
2
6 gl - Standard OpenGL api.
7
9 Standard OpenGL api. See www.khronos.org
10 Booleans are represented by integers 0 and 1.
12
14 clamp() = float():
15 0.0..1.0
18 enum() = non_neg_integer():
20 See wx/include/gl.hrl
23 matrix() = matrix12() | matrix16():
25 matrix12() = {float(), float(), float(), float(), float(), float(),
28 float(), float(), float(), float(), float(), float()}:
29 matrix16() = {float(), float(), float(), float(), float(), float(),
32 float(), float(), float(), float(), float(), float(), float(),
33 float(), float(), float()}:
34 mem() = binary() | tuple():
37 Memory block
40 offset() = non_neg_integer():
42 Offset in memory block
45
47 clearIndex(C) -> ok
48 Types:
50 C = float()
52 Specify the clear value for the color index buffers
54 gl:clearIndex specifies the index used by gl:clear/1 to clear
56 the color index buffers. C is not clamped. Rather, C is con‐
57 verted to a fixed-point value with unspecified precision to the
58 right of the binary point. The integer part of this value is
59 then masked with 2 m-1, where m is the number of bits in a color
60 index stored in the frame buffer.
61 See external documentation.
63 clearColor(Red, Green, Blue, Alpha) -> ok
65 Types:
67 Red = clamp()
69 Green = clamp()
70 Blue = clamp()
71 Alpha = clamp()
72 Specify clear values for the color buffers
74 gl:clearColor specifies the red, green, blue, and alpha values
76 used by gl:clear/1 to clear the color buffers. Values specified
77 by gl:clearColor are clamped to the range [0 1].
78 See external documentation.
80 clear(Mask) -> ok
82 Types:
84 Mask = integer()
86 Clear buffers to preset values
88 gl:clear sets the bitplane area of the window to values previ‐
90 ously selected by gl:clearColor , gl:clearDepth, and gl:clearS‐
91 tencil. Multiple color buffers can be cleared simultaneously by
92 selecting more than one buffer at a time using gl:drawBuffer/1 .
93 See external documentation.
95 indexMask(Mask) -> ok
97 Types:
99 Mask = integer()
101 Control the writing of individual bits in the color index buf‐
103 fers
104 gl:indexMask controls the writing of individual bits in the
106 color index buffers. The least significant n bits of Mask ,
107 where n is the number of bits in a color index buffer, specify a
108 mask. Where a 1 (one) appears in the mask, it's possible to
109 write to the corresponding bit in the color index buffer (or
110 buffers). Where a 0 (zero) appears, the corresponding bit is
111 write-protected.
112 See external documentation.
114 colorMask(Red, Green, Blue, Alpha) -> ok
116 Types:
118 Red = 0 | 1
120 Green = 0 | 1
121 Blue = 0 | 1
122 Alpha = 0 | 1
123 Enable and disable writing of frame buffer color components
125 gl:colorMask and gl:colorMaski specify whether the individual
127 color components in the frame buffer can or cannot be written.
128 gl:colorMaski sets the mask for a specific draw buffer, whereas
129 gl:colorMask sets the mask for all draw buffers. If Red is
130 ?GL_FALSE, for example, no change is made to the red component
131 of any pixel in any of the color buffers, regardless of the
132 drawing operation attempted.
133 See external documentation.
135 alphaFunc(Func, Ref) -> ok
137 Types:
139 Func = enum()
141 Ref = clamp()
142 Specify the alpha test function
144 The alpha test discards fragments depending on the outcome of a
146 comparison between an incoming fragment's alpha value and a con‐
147 stant reference value. gl:alphaFunc specifies the reference
148 value and the comparison function. The comparison is performed
149 only if alpha testing is enabled. By default, it is not enabled.
150 (See gl:enable/1 and gl:enable/1 of ?GL_ALPHA_TEST.)
151 See external documentation.
153 blendFunc(Sfactor, Dfactor) -> ok
155 Types:
157 Sfactor = enum()
159 Dfactor = enum()
160 Specify pixel arithmetic
162 Pixels can be drawn using a function that blends the incoming
164 (source) RGBA values with the RGBA values that are already in
165 the frame buffer (the destination values). Blending is initially
166 disabled. Use gl:enable/1 and gl:enable/1 with argument
167 ?GL_BLEND to enable and disable blending.
168 See external documentation.
170 logicOp(Opcode) -> ok
172 Types:
174 Opcode = enum()
176 Specify a logical pixel operation for rendering
178 gl:logicOp specifies a logical operation that, when enabled, is
180 applied between the incoming RGBA color and the RGBA color at
181 the corresponding location in the frame buffer. To enable or
182 disable the logical operation, call gl:enable/1 and gl:enable/1
183 using the symbolic constant ?GL_COLOR_LOGIC_OP. The initial
184 value is disabled.
185 See external documentation.
187 cullFace(Mode) -> ok
189 Types:
191 Mode = enum()
193 Specify whether front- or back-facing facets can be culled
195 gl:cullFace specifies whether front- or back-facing facets are
197 culled (as specified by mode) when facet culling is enabled.
198 Facet culling is initially disabled. To enable and disable facet
199 culling, call the gl:enable/1 and gl:enable/1 commands with the
200 argument ?GL_CULL_FACE. Facets include triangles, quadrilater‐
201 als, polygons, and rectangles.
202 See external documentation.
204 frontFace(Mode) -> ok
206 Types:
208 Mode = enum()
210 Define front- and back-facing polygons
212 In a scene composed entirely of opaque closed surfaces, back-
214 facing polygons are never visible. Eliminating these invisible
215 polygons has the obvious benefit of speeding up the rendering of
216 the image. To enable and disable elimination of back-facing
217 polygons, call gl:enable/1 and gl:enable/1 with argument
218 ?GL_CULL_FACE.
219 See external documentation.
221 pointSize(Size) -> ok
223 Types:
225 Size = float()
227 Specify the diameter of rasterized points
229 gl:pointSize specifies the rasterized diameter of points. If
231 point size mode is disabled (see gl:enable/1 with parameter
232 ?GL_PROGRAM_POINT_SIZE), this value will be used to rasterize
233 points. Otherwise, the value written to the shading language
234 built-in variable gl_PointSize will be used.
235 See external documentation.
237 lineWidth(Width) -> ok
239 Types:
241 Width = float()
243 Specify the width of rasterized lines
245 gl:lineWidth specifies the rasterized width of both aliased and
247 antialiased lines. Using a line width other than 1 has different
248 effects, depending on whether line antialiasing is enabled. To
249 enable and disable line antialiasing, call gl:enable/1 and
250 gl:enable/1 with argument ?GL_LINE_SMOOTH. Line antialiasing is
251 initially disabled.
252 See external documentation.
254 lineStipple(Factor, Pattern) -> ok
256 Types:
258 Factor = integer()
260 Pattern = integer()
261 Specify the line stipple pattern
263 Line stippling masks out certain fragments produced by rasteri‐
265 zation; those fragments will not be drawn. The masking is
266 achieved by using three parameters: the 16-bit line stipple pat‐
267 tern Pattern , the repeat count Factor , and an integer stipple
268 counter s.
269 See external documentation.
271 polygonMode(Face, Mode) -> ok
273 Types:
275 Face = enum()
277 Mode = enum()
278 Select a polygon rasterization mode
280 gl:polygonMode controls the interpretation of polygons for ras‐
282 terization. Face describes which polygons Mode applies to: both
283 front and back-facing polygons (?GL_FRONT_AND_BACK ). The poly‐
284 gon mode affects only the final rasterization of polygons. In
285 particular, a polygon's vertices are lit and the polygon is
286 clipped and possibly culled before these modes are applied.
287 See external documentation.
289 polygonOffset(Factor, Units) -> ok
291 Types:
293 Factor = float()
295 Units = float()
296 Set the scale and units used to calculate depth values
298 When ?GL_POLYGON_OFFSET_FILL, ?GL_POLYGON_OFFSET_LINE, or
300 ?GL_POLYGON_OFFSET_POINT is enabled, each fragment's depth value
301 will be offset after it is interpolated from the depth values of
302 the appropriate vertices. The value of the offset is fac‐
303 tor×DZ+r×units, where DZ is a measurement of the change in depth
304 relative to the screen area of the polygon, and r is the small‐
305 est value that is guaranteed to produce a resolvable offset for
306 a given implementation. The offset is added before the depth
307 test is performed and before the value is written into the depth
308 buffer.
309 See external documentation.
311 polygonStipple(Mask) -> ok
313 Types:
315 Mask = binary()
317 Set the polygon stippling pattern
319 Polygon stippling, like line stippling (see gl:lineStipple/2 ),
321 masks out certain fragments produced by rasterization, creating
322 a pattern. Stippling is independent of polygon antialiasing.
323 See external documentation.
325 getPolygonStipple() -> binary()
327 Return the polygon stipple pattern
329 gl:getPolygonStipple returns to Pattern a 32×32 polygon stipple
331 pattern. The pattern is packed into memory as if gl:readPixels/7
332 with both height and width of 32, type of ?GL_BITMAP, and format
333 of ?GL_COLOR_INDEX were called, and the stipple pattern were
334 stored in an internal 32×32 color index buffer. Unlike gl:read‐
335 Pixels/7 , however, pixel transfer operations (shift, offset,
336 pixel map) are not applied to the returned stipple image.
337 See external documentation.
339 edgeFlag(Flag) -> ok
341 Types:
343 Flag = 0 | 1
345 Flag edges as either boundary or nonboundary
347 Each vertex of a polygon, separate triangle, or separate quadri‐
349 lateral specified between a gl:'begin'/1 / gl:'begin'/1 pair is
350 marked as the start of either a boundary or nonboundary edge. If
351 the current edge flag is true when the vertex is specified, the
352 vertex is marked as the start of a boundary edge. Otherwise, the
353 vertex is marked as the start of a nonboundary edge. gl:edgeFlag
354 sets the edge flag bit to ?GL_TRUE if Flag is ?GL_TRUE and to
355 ?GL_FALSE otherwise.
356 See external documentation.
358 edgeFlagv(Flag) -> ok
360 Types:
362 Flag = {Flag::0 | 1}
364 Equivalent to edgeFlag(Flag).
366 scissor(X, Y, Width, Height) -> ok
368 Types:
370 X = integer()
372 Y = integer()
373 Width = integer()
374 Height = integer()
375 Define the scissor box
377 gl:scissor defines a rectangle, called the scissor box, in win‐
379 dow coordinates. The first two arguments, X and Y , specify the
380 lower left corner of the box. Width and Height specify the width
381 and height of the box.
382 See external documentation.
384 clipPlane(Plane, Equation) -> ok
386 Types:
388 Plane = enum()
390 Equation = {float(), float(), float(), float()}
391 Specify a plane against which all geometry is clipped
393 Geometry is always clipped against the boundaries of a six-plane
395 frustum in x, y , and z. gl:clipPlane allows the specification
396 of additional planes, not necessarily perpendicular to the x, y,
397 or z axis, against which all geometry is clipped. To determine
398 the maximum number of additional clipping planes, call gl:get‐
399 Booleanv/1 with argument ?GL_MAX_CLIP_PLANES. All implementa‐
400 tions support at least six such clipping planes. Because the
401 resulting clipping region is the intersection of the defined
402 half-spaces, it is always convex.
403 See external documentation.
405 getClipPlane(Plane) -> {float(), float(), float(), float()}
407 Types:
409 Plane = enum()
411 Return the coefficients of the specified clipping plane
413 gl:getClipPlane returns in Equation the four coefficients of the
415 plane equation for Plane .
416 See external documentation.
418 drawBuffer(Mode) -> ok
420 Types:
422 Mode = enum()
424 Specify which color buffers are to be drawn into
426 When colors are written to the frame buffer, they are written
428 into the color buffers specified by gl:drawBuffer. The specifi‐
429 cations are as follows:
430 See external documentation.
432 readBuffer(Mode) -> ok
434 Types:
436 Mode = enum()
438 Select a color buffer source for pixels
440 gl:readBuffer specifies a color buffer as the source for subse‐
442 quent gl:readPixels/7 , gl:copyTexImage1D/7 , gl:copyTexIm‐
443 age2D/8 , gl:copyTexSubImage1D/6 , gl:copyTexSubImage2D/8 , and
444 gl:copyTexSubImage3D/9 commands. Mode accepts one of twelve or
445 more predefined values. In a fully configured system, ?GL_FRONT,
446 ?GL_LEFT, and ?GL_FRONT_LEFT all name the front left buffer,
447 ?GL_FRONT_RIGHT and ?GL_RIGHT name the front right buffer, and
448 ?GL_BACK_LEFT and ?GL_BACK name the back left buffer. Further
449 more, the constants ?GL_COLOR_ATTACHMENTi may be used to indi‐
450 cate the ith color attachment where i ranges from zero to the
451 value of ?GL_MAX_COLOR_ATTACHMENTS minus one.
452 See external documentation.
454 enable(Cap) -> ok
456 Types:
458 Cap = enum()
460 Enable or disable server-side GL capabilities
462 gl:enable and gl:enable/1 enable and disable various capabili‐
464 ties. Use gl:isEnabled/1 or gl:getBooleanv/1 to determine the
465 current setting of any capability. The initial value for each
466 capability with the exception of ?GL_DITHER and ?GL_MULTISAMPLE
467 is ?GL_FALSE. The initial value for ?GL_DITHER and ?GL_MULTISAM‐
468 PLE is ?GL_TRUE.
469 See external documentation.
471 disable(Cap) -> ok
473 Types:
475 Cap = enum()
477 See enable/1
479 isEnabled(Cap) -> 0 | 1
481 Types:
483 Cap = enum()
485 Test whether a capability is enabled
487 gl:isEnabled returns ?GL_TRUE if Cap is an enabled capability
489 and returns ?GL_FALSE otherwise. Boolean states that are indexed
490 may be tested with gl:isEnabledi . For gl:isEnabledi, Index
491 specifies the index of the capability to test. Index must be
492 between zero and the count of indexed capabilities for Cap .
493 Initially all capabilities except ?GL_DITHER are disabled;
494 ?GL_DITHER is initially enabled.
495 See external documentation.
497 enableClientState(Cap) -> ok
499 Types:
501 Cap = enum()
503 Enable or disable client-side capability
505 gl:enableClientState and gl:enableClientState/1 enable or dis‐
507 able individual client-side capabilities. By default, all
508 client-side capabilities are disabled. Both gl:enableClientState
509 and gl:enableClientState/1 take a single argument, Cap , which
510 can assume one of the following values:
511 See external documentation.
513 disableClientState(Cap) -> ok
515 Types:
517 Cap = enum()
519 See enableClientState/1
521 getBooleanv(Pname) -> [0 | 1]
523 Types:
525 Pname = enum()
527 Return the value or values of a selected parameter
529 These four commands return values for simple state variables in
531 GL. Pname is a symbolic constant indicating the state variable
532 to be returned, and Params is a pointer to an array of the indi‐
533 cated type in which to place the returned data.
534 See external documentation.
536 getDoublev(Pname) -> [float()]
538 Types:
540 Pname = enum()
542 See getBooleanv/1
544 getFloatv(Pname) -> [float()]
546 Types:
548 Pname = enum()
550 See getBooleanv/1
552 getIntegerv(Pname) -> [integer()]
554 Types:
556 Pname = enum()
558 See getBooleanv/1
560 pushAttrib(Mask) -> ok
562 Types:
564 Mask = integer()
566 Push and pop the server attribute stack
568 gl:pushAttrib takes one argument, a mask that indicates which
570 groups of state variables to save on the attribute stack. Sym‐
571 bolic constants are used to set bits in the mask. Mask is typi‐
572 cally constructed by specifying the bitwise-or of several of
573 these constants together. The special mask ?GL_ALL_ATTRIB_BITS
574 can be used to save all stackable states.
575 See external documentation.
577 popAttrib() -> ok
579 See pushAttrib/1
581 pushClientAttrib(Mask) -> ok
583 Types:
585 Mask = integer()
587 Push and pop the client attribute stack
589 gl:pushClientAttrib takes one argument, a mask that indicates
591 which groups of client-state variables to save on the client
592 attribute stack. Symbolic constants are used to set bits in the
593 mask. Mask is typically constructed by specifying the bitwise-or
594 of several of these constants together. The special mask
595 ?GL_CLIENT_ALL_ATTRIB_BITS can be used to save all stackable
596 client state.
597 See external documentation.
599 popClientAttrib() -> ok
601 See pushClientAttrib/1
603 renderMode(Mode) -> integer()
605 Types:
607 Mode = enum()
609 Set rasterization mode
611 gl:renderMode sets the rasterization mode. It takes one argu‐
613 ment, Mode , which can assume one of three predefined values:
614 See external documentation.
616 getError() -> enum()
618 Return error information
620 gl:getError returns the value of the error flag. Each detectable
622 error is assigned a numeric code and symbolic name. When an
623 error occurs, the error flag is set to the appropriate error
624 code value. No other errors are recorded until gl:getError is
625 called, the error code is returned, and the flag is reset to
626 ?GL_NO_ERROR. If a call to gl:getError returns ?GL_NO_ERROR,
627 there has been no detectable error since the last call to
628 gl:getError , or since the GL was initialized.
629 See external documentation.
631 getString(Name) -> string()
633 Types:
635 Name = enum()
637 Return a string describing the current GL connection
639 gl:getString returns a pointer to a static string describing
641 some aspect of the current GL connection. Name can be one of the
642 following:
643 See external documentation.
645 finish() -> ok
647 Block until all GL execution is complete
649 gl:finish does not return until the effects of all previously
651 called GL commands are complete. Such effects include all
652 changes to GL state, all changes to connection state, and all
653 changes to the frame buffer contents.
654 See external documentation.
656 flush() -> ok
658 Force execution of GL commands in finite time
660 Different GL implementations buffer commands in several differ‐
662 ent locations, including network buffers and the graphics accel‐
663 erator itself. gl:flush empties all of these buffers, causing
664 all issued commands to be executed as quickly as they are
665 accepted by the actual rendering engine. Though this execution
666 may not be completed in any particular time period, it does com‐
667 plete in finite time.
668 See external documentation.
670 hint(Target, Mode) -> ok
672 Types:
674 Target = enum()
676 Mode = enum()
677 Specify implementation-specific hints
679 Certain aspects of GL behavior, when there is room for interpre‐
681 tation, can be controlled with hints. A hint is specified with
682 two arguments. Target is a symbolic constant indicating the
683 behavior to be controlled, and Mode is another symbolic constant
684 indicating the desired behavior. The initial value for each Tar‐
685 get is ?GL_DONT_CARE . Mode can be one of the following:
686 See external documentation.
688 clearDepth(Depth) -> ok
690 Types:
692 Depth = clamp()
694 Specify the clear value for the depth buffer
696 gl:clearDepth specifies the depth value used by gl:clear/1 to
698 clear the depth buffer. Values specified by gl:clearDepth are
699 clamped to the range [0 1].
700 See external documentation.
702 depthFunc(Func) -> ok
704 Types:
706 Func = enum()
708 Specify the value used for depth buffer comparisons
710 gl:depthFunc specifies the function used to compare each incom‐
712 ing pixel depth value with the depth value present in the depth
713 buffer. The comparison is performed only if depth testing is
714 enabled. (See gl:enable/1 and gl:enable/1 of ?GL_DEPTH_TEST .)
715 See external documentation.
717 depthMask(Flag) -> ok
719 Types:
721 Flag = 0 | 1
723 Enable or disable writing into the depth buffer
725 gl:depthMask specifies whether the depth buffer is enabled for
727 writing. If Flag is ?GL_FALSE, depth buffer writing is disabled.
728 Otherwise, it is enabled. Initially, depth buffer writing is
729 enabled.
730 See external documentation.
732 depthRange(Near_val, Far_val) -> ok
734 Types:
736 Near_val = clamp()
738 Far_val = clamp()
739 Specify mapping of depth values from normalized device coordi‐
741 nates to window coordinates
742 After clipping and division by w, depth coordinates range from
744 -1 to 1, corresponding to the near and far clipping planes.
745 gl:depthRange specifies a linear mapping of the normalized depth
746 coordinates in this range to window depth coordinates. Regard‐
747 less of the actual depth buffer implementation, window coordi‐
748 nate depth values are treated as though they range from 0
749 through 1 (like color components). Thus, the values accepted by
750 gl:depthRange are both clamped to this range before they are
751 accepted.
752 See external documentation.
754 clearAccum(Red, Green, Blue, Alpha) -> ok
756 Types:
758 Red = float()
760 Green = float()
761 Blue = float()
762 Alpha = float()
763 Specify clear values for the accumulation buffer
765 gl:clearAccum specifies the red, green, blue, and alpha values
767 used by gl:clear/1 to clear the accumulation buffer.
768 See external documentation.
770 accum(Op, Value) -> ok
772 Types:
774 Op = enum()
776 Value = float()
777 Operate on the accumulation buffer
779 The accumulation buffer is an extended-range color buffer.
781 Images are not rendered into it. Rather, images rendered into
782 one of the color buffers are added to the contents of the accu‐
783 mulation buffer after rendering. Effects such as antialiasing
784 (of points, lines, and polygons), motion blur, and depth of
785 field can be created by accumulating images generated with dif‐
786 ferent transformation matrices.
787 See external documentation.
789 matrixMode(Mode) -> ok
791 Types:
793 Mode = enum()
795 Specify which matrix is the current matrix
797 gl:matrixMode sets the current matrix mode. Mode can assume one
799 of four values:
800 See external documentation.
802 ortho(Left, Right, Bottom, Top, Near_val, Far_val) -> ok
804 Types:
806 Left = float()
808 Right = float()
809 Bottom = float()
810 Top = float()
811 Near_val = float()
812 Far_val = float()
813 Multiply the current matrix with an orthographic matrix
815 gl:ortho describes a transformation that produces a parallel
817 projection. The current matrix (see gl:matrixMode/1 ) is multi‐
818 plied by this matrix and the result replaces the current matrix,
819 as if gl:multMatrixd/1 were called with the following matrix as
820 its argument:
821 See external documentation.
823 frustum(Left, Right, Bottom, Top, Near_val, Far_val) -> ok
825 Types:
827 Left = float()
829 Right = float()
830 Bottom = float()
831 Top = float()
832 Near_val = float()
833 Far_val = float()
834 Multiply the current matrix by a perspective matrix
836 gl:frustum describes a perspective matrix that produces a per‐
838 spective projection. The current matrix (see gl:matrixMode/1 )
839 is multiplied by this matrix and the result replaces the current
840 matrix, as if gl:multMatrixd/1 were called with the following
841 matrix as its argument:
842 See external documentation.
844 viewport(X, Y, Width, Height) -> ok
846 Types:
848 X = integer()
850 Y = integer()
851 Width = integer()
852 Height = integer()
853 Set the viewport
855 gl:viewport specifies the affine transformation of x and y from
857 normalized device coordinates to window coordinates. Let (x nd y
858 nd) be normalized device coordinates. Then the window coordi‐
859 nates (x w y w) are computed as follows:
860 See external documentation.
862 pushMatrix() -> ok
864 Push and pop the current matrix stack
866 There is a stack of matrices for each of the matrix modes. In
868 ?GL_MODELVIEW mode, the stack depth is at least 32. In the other
869 modes, ?GL_COLOR, ?GL_PROJECTION , and ?GL_TEXTURE, the depth is
870 at least 2. The current matrix in any mode is the matrix on the
871 top of the stack for that mode.
872 See external documentation.
874 popMatrix() -> ok
876 See pushMatrix/0
878 loadIdentity() -> ok
880 Replace the current matrix with the identity matrix
882 gl:loadIdentity replaces the current matrix with the identity
884 matrix. It is semantically equivalent to calling gl:loadMa‐
885 trixd/1 with the identity matrix
886 See external documentation.
888 loadMatrixd(M) -> ok
890 Types:
892 M = matrix()
894 Replace the current matrix with the specified matrix
896 gl:loadMatrix replaces the current matrix with the one whose
898 elements are specified by M . The current matrix is the projec‐
899 tion matrix, modelview matrix, or texture matrix, depending on
900 the current matrix mode (see gl:matrixMode/1 ).
901 See external documentation.
903 loadMatrixf(M) -> ok
905 Types:
907 M = matrix()
909 See loadMatrixd/1
911 multMatrixd(M) -> ok
913 Types:
915 M = matrix()
917 Multiply the current matrix with the specified matrix
919 gl:multMatrix multiplies the current matrix with the one speci‐
921 fied using M , and replaces the current matrix with the product.
922 See external documentation.
924 multMatrixf(M) -> ok
926 Types:
928 M = matrix()
930 See multMatrixd/1
932 rotated(Angle, X, Y, Z) -> ok
934 Types:
936 Angle = float()
938 X = float()
939 Y = float()
940 Z = float()
941 Multiply the current matrix by a rotation matrix
943 gl:rotate produces a rotation of Angle degrees around the vector
945 (x y z). The current matrix (see gl:matrixMode/1 ) is multiplied
946 by a rotation matrix with the product replacing the current
947 matrix, as if gl:multMatrixd/1 were called with the following
948 matrix as its argument:
949 See external documentation.
951 rotatef(Angle, X, Y, Z) -> ok
953 Types:
955 Angle = float()
957 X = float()
958 Y = float()
959 Z = float()
960 See rotated/4
962 scaled(X, Y, Z) -> ok
964 Types:
966 X = float()
968 Y = float()
969 Z = float()
970 Multiply the current matrix by a general scaling matrix
972 gl:scale produces a nonuniform scaling along the x, y, and z
974 axes. The three parameters indicate the desired scale factor
975 along each of the three axes.
976 See external documentation.
978 scalef(X, Y, Z) -> ok
980 Types:
982 X = float()
984 Y = float()
985 Z = float()
986 See scaled/3
988 translated(X, Y, Z) -> ok
990 Types:
992 X = float()
994 Y = float()
995 Z = float()
996 Multiply the current matrix by a translation matrix
998 gl:translate produces a translation by (x y z). The current
1000 matrix (see gl:matrixMode/1 ) is multiplied by this translation
1001 matrix, with the product replacing the current matrix, as if
1002 gl:multMatrixd/1 were called with the following matrix for its
1003 argument:
1004 See external documentation.
1006 translatef(X, Y, Z) -> ok
1008 Types:
1010 X = float()
1012 Y = float()
1013 Z = float()
1014 See translated/3
1016 isList(List) -> 0 | 1
1018 Types:
1020 List = integer()
1022 Determine if a name corresponds to a display list
1024 gl:isList returns ?GL_TRUE if List is the name of a display list
1026 and returns ?GL_FALSE if it is not, or if an error occurs.
1027 See external documentation.
1029 deleteLists(List, Range) -> ok
1031 Types:
1033 List = integer()
1035 Range = integer()
1036 Delete a contiguous group of display lists
1038 gl:deleteLists causes a contiguous group of display lists to be
1040 deleted. List is the name of the first display list to be
1041 deleted, and Range is the number of display lists to delete. All
1042 display lists d with list<= d<= list+range-1 are deleted.
1043 See external documentation.
1045 genLists(Range) -> integer()
1047 Types:
1049 Range = integer()
1051 Generate a contiguous set of empty display lists
1053 gl:genLists has one argument, Range . It returns an integer n
1055 such that Range contiguous empty display lists, named n, n+1,
1056 ..., n+range-1, are created. If Range is 0, if there is no group
1057 of Range contiguous names available, or if any error is gener‐
1058 ated, no display lists are generated, and 0 is returned.
1059 See external documentation.
1061 newList(List, Mode) -> ok
1063 Types:
1065 List = integer()
1067 Mode = enum()
1068 Create or replace a display list
1070 Display lists are groups of GL commands that have been stored
1072 for subsequent execution. Display lists are created with
1073 gl:newList. All subsequent commands are placed in the display
1074 list, in the order issued, until gl:endList/0 is called.
1075 See external documentation.
1077 endList() -> ok
1079 glBeginList
1081 See external documentation.
1083 callList(List) -> ok
1085 Types:
1087 List = integer()
1089 Execute a display list
1091 gl:callList causes the named display list to be executed. The
1093 commands saved in the display list are executed in order, just
1094 as if they were called without using a display list. If List has
1095 not been defined as a display list, gl:callList is ignored.
1096 See external documentation.
1098 callLists(Lists) -> ok
1100 Types:
1102 Lists = [integer()]
1104 Execute a list of display lists
1106 gl:callLists causes each display list in the list of names
1108 passed as Lists to be executed. As a result, the commands saved
1109 in each display list are executed in order, just as if they were
1110 called without using a display list. Names of display lists that
1111 have not been defined are ignored.
1112 See external documentation.
1114 listBase(Base) -> ok
1116 Types:
1118 Base = integer()
1120 set the display-list base for
1122 gl:callLists/1
1124 gl:callLists/1 specifies an array of offsets. Display-list names
1126 are generated by adding Base to each offset. Names that refer‐
1127 ence valid display lists are executed; the others are ignored.
1128 See external documentation.
1130 begin(Mode) -> ok
1132 Types:
1134 Mode = enum()
1136 Delimit the vertices of a primitive or a group of like primi‐
1138 tives
1139 gl:'begin' and gl:'begin'/1 delimit the vertices that define a
1141 primitive or a group of like primitives. gl:'begin' accepts a
1142 single argument that specifies in which of ten ways the vertices
1143 are interpreted. Taking n as an integer count starting at one,
1144 and N as the total number of vertices specified, the interpreta‐
1145 tions are as follows:
1146 See external documentation.
1148 end() -> ok
1150 See 'begin'/1
1152 vertex2d(X, Y) -> ok
1154 Types:
1156 X = float()
1158 Y = float()
1159 Specify a vertex
1161 gl:vertex commands are used within gl:'begin'/1 / gl:'begin'/1
1163 pairs to specify point, line, and polygon vertices. The current
1164 color, normal, texture coordinates, and fog coordinate are asso‐
1165 ciated with the vertex when gl:vertex is called.
1166 See external documentation.
1168 vertex2f(X, Y) -> ok
1170 Types:
1172 X = float()
1174 Y = float()
1175 See vertex2d/2
1177 vertex2i(X, Y) -> ok
1179 Types:
1181 X = integer()
1183 Y = integer()
1184 See vertex2d/2
1186 vertex2s(X, Y) -> ok
1188 Types:
1190 X = integer()
1192 Y = integer()
1193 See vertex2d/2
1195 vertex3d(X, Y, Z) -> ok
1197 Types:
1199 X = float()
1201 Y = float()
1202 Z = float()
1203 See vertex2d/2
1205 vertex3f(X, Y, Z) -> ok
1207 Types:
1209 X = float()
1211 Y = float()
1212 Z = float()
1213 See vertex2d/2
1215 vertex3i(X, Y, Z) -> ok
1217 Types:
1219 X = integer()
1221 Y = integer()
1222 Z = integer()
1223 See vertex2d/2
1225 vertex3s(X, Y, Z) -> ok
1227 Types:
1229 X = integer()
1231 Y = integer()
1232 Z = integer()
1233 See vertex2d/2
1235 vertex4d(X, Y, Z, W) -> ok
1237 Types:
1239 X = float()
1241 Y = float()
1242 Z = float()
1243 W = float()
1244 See vertex2d/2
1246 vertex4f(X, Y, Z, W) -> ok
1248 Types:
1250 X = float()
1252 Y = float()
1253 Z = float()
1254 W = float()
1255 See vertex2d/2
1257 vertex4i(X, Y, Z, W) -> ok
1259 Types:
1261 X = integer()
1263 Y = integer()
1264 Z = integer()
1265 W = integer()
1266 See vertex2d/2
1268 vertex4s(X, Y, Z, W) -> ok
1270 Types:
1272 X = integer()
1274 Y = integer()
1275 Z = integer()
1276 W = integer()
1277 See vertex2d/2
1279 vertex2dv(V) -> ok
1281 Types:
1283 V = {X::float(), Y::float()}
1285 Equivalent to vertex2d(X, Y).
1287 vertex2fv(V) -> ok
1289 Types:
1291 V = {X::float(), Y::float()}
1293 Equivalent to vertex2f(X, Y).
1295 vertex2iv(V) -> ok
1297 Types:
1299 V = {X::integer(), Y::integer()}
1301 Equivalent to vertex2i(X, Y).
1303 vertex2sv(V) -> ok
1305 Types:
1307 V = {X::integer(), Y::integer()}
1309 Equivalent to vertex2s(X, Y).
1311 vertex3dv(V) -> ok
1313 Types:
1315 V = {X::float(), Y::float(), Z::float()}
1317 Equivalent to vertex3d(X, Y, Z).
1319 vertex3fv(V) -> ok
1321 Types:
1323 V = {X::float(), Y::float(), Z::float()}
1325 Equivalent to vertex3f(X, Y, Z).
1327 vertex3iv(V) -> ok
1329 Types:
1331 V = {X::integer(), Y::integer(), Z::integer()}
1333 Equivalent to vertex3i(X, Y, Z).
1335 vertex3sv(V) -> ok
1337 Types:
1339 V = {X::integer(), Y::integer(), Z::integer()}
1341 Equivalent to vertex3s(X, Y, Z).
1343 vertex4dv(V) -> ok
1345 Types:
1347 V = {X::float(), Y::float(), Z::float(), W::float()}
1349 Equivalent to vertex4d(X, Y, Z, W).
1351 vertex4fv(V) -> ok
1353 Types:
1355 V = {X::float(), Y::float(), Z::float(), W::float()}
1357 Equivalent to vertex4f(X, Y, Z, W).
1359 vertex4iv(V) -> ok
1361 Types:
1363 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
1365 Equivalent to vertex4i(X, Y, Z, W).
1367 vertex4sv(V) -> ok
1369 Types:
1371 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
1373 Equivalent to vertex4s(X, Y, Z, W).
1375 normal3b(Nx, Ny, Nz) -> ok
1377 Types:
1379 Nx = integer()
1381 Ny = integer()
1382 Nz = integer()
1383 Set the current normal vector
1385 The current normal is set to the given coordinates whenever
1387 gl:normal is issued. Byte, short, or integer arguments are con‐
1388 verted to floating-point format with a linear mapping that maps
1389 the most positive representable integer value to 1.0 and the
1390 most negative representable integer value to -1.0.
1391 See external documentation.
1393 normal3d(Nx, Ny, Nz) -> ok
1395 Types:
1397 Nx = float()
1399 Ny = float()
1400 Nz = float()
1401 See normal3b/3
1403 normal3f(Nx, Ny, Nz) -> ok
1405 Types:
1407 Nx = float()
1409 Ny = float()
1410 Nz = float()
1411 See normal3b/3
1413 normal3i(Nx, Ny, Nz) -> ok
1415 Types:
1417 Nx = integer()
1419 Ny = integer()
1420 Nz = integer()
1421 See normal3b/3
1423 normal3s(Nx, Ny, Nz) -> ok
1425 Types:
1427 Nx = integer()
1429 Ny = integer()
1430 Nz = integer()
1431 See normal3b/3
1433 normal3bv(V) -> ok
1435 Types:
1437 V = {Nx::integer(), Ny::integer(), Nz::integer()}
1439 Equivalent to normal3b(Nx, Ny, Nz).
1441 normal3dv(V) -> ok
1443 Types:
1445 V = {Nx::float(), Ny::float(), Nz::float()}
1447 Equivalent to normal3d(Nx, Ny, Nz).
1449 normal3fv(V) -> ok
1451 Types:
1453 V = {Nx::float(), Ny::float(), Nz::float()}
1455 Equivalent to normal3f(Nx, Ny, Nz).
1457 normal3iv(V) -> ok
1459 Types:
1461 V = {Nx::integer(), Ny::integer(), Nz::integer()}
1463 Equivalent to normal3i(Nx, Ny, Nz).
1465 normal3sv(V) -> ok
1467 Types:
1469 V = {Nx::integer(), Ny::integer(), Nz::integer()}
1471 Equivalent to normal3s(Nx, Ny, Nz).
1473 indexd(C) -> ok
1475 Types:
1477 C = float()
1479 Set the current color index
1481 gl:index updates the current (single-valued) color index. It
1483 takes one argument, the new value for the current color index.
1484 See external documentation.
1486 indexf(C) -> ok
1488 Types:
1490 C = float()
1492 See indexd/1
1494 indexi(C) -> ok
1496 Types:
1498 C = integer()
1500 See indexd/1
1502 indexs(C) -> ok
1504 Types:
1506 C = integer()
1508 See indexd/1
1510 indexub(C) -> ok
1512 Types:
1514 C = integer()
1516 See indexd/1
1518 indexdv(C) -> ok
1520 Types:
1522 C = {C::float()}
1524 Equivalent to indexd(C).
1526 indexfv(C) -> ok
1528 Types:
1530 C = {C::float()}
1532 Equivalent to indexf(C).
1534 indexiv(C) -> ok
1536 Types:
1538 C = {C::integer()}
1540 Equivalent to indexi(C).
1542 indexsv(C) -> ok
1544 Types:
1546 C = {C::integer()}
1548 Equivalent to indexs(C).
1550 indexubv(C) -> ok
1552 Types:
1554 C = {C::integer()}
1556 Equivalent to indexub(C).
1558 color3b(Red, Green, Blue) -> ok
1560 Types:
1562 Red = integer()
1564 Green = integer()
1565 Blue = integer()
1566 Set the current color
1568 The GL stores both a current single-valued color index and a
1570 current four-valued RGBA color. gl:color sets a new four-valued
1571 RGBA color. gl:color has two major variants: gl:color3 and
1572 gl:color4. gl:color3 variants specify new red, green, and blue
1573 values explicitly and set the current alpha value to 1.0 (full
1574 intensity) implicitly. gl:color4 variants specify all four color
1575 components explicitly.
1576 See external documentation.
1578 color3d(Red, Green, Blue) -> ok
1580 Types:
1582 Red = float()
1584 Green = float()
1585 Blue = float()
1586 See color3b/3
1588 color3f(Red, Green, Blue) -> ok
1590 Types:
1592 Red = float()
1594 Green = float()
1595 Blue = float()
1596 See color3b/3
1598 color3i(Red, Green, Blue) -> ok
1600 Types:
1602 Red = integer()
1604 Green = integer()
1605 Blue = integer()
1606 See color3b/3
1608 color3s(Red, Green, Blue) -> ok
1610 Types:
1612 Red = integer()
1614 Green = integer()
1615 Blue = integer()
1616 See color3b/3
1618 color3ub(Red, Green, Blue) -> ok
1620 Types:
1622 Red = integer()
1624 Green = integer()
1625 Blue = integer()
1626 See color3b/3
1628 color3ui(Red, Green, Blue) -> ok
1630 Types:
1632 Red = integer()
1634 Green = integer()
1635 Blue = integer()
1636 See color3b/3
1638 color3us(Red, Green, Blue) -> ok
1640 Types:
1642 Red = integer()
1644 Green = integer()
1645 Blue = integer()
1646 See color3b/3
1648 color4b(Red, Green, Blue, Alpha) -> ok
1650 Types:
1652 Red = integer()
1654 Green = integer()
1655 Blue = integer()
1656 Alpha = integer()
1657 See color3b/3
1659 color4d(Red, Green, Blue, Alpha) -> ok
1661 Types:
1663 Red = float()
1665 Green = float()
1666 Blue = float()
1667 Alpha = float()
1668 See color3b/3
1670 color4f(Red, Green, Blue, Alpha) -> ok
1672 Types:
1674 Red = float()
1676 Green = float()
1677 Blue = float()
1678 Alpha = float()
1679 See color3b/3
1681 color4i(Red, Green, Blue, Alpha) -> ok
1683 Types:
1685 Red = integer()
1687 Green = integer()
1688 Blue = integer()
1689 Alpha = integer()
1690 See color3b/3
1692 color4s(Red, Green, Blue, Alpha) -> ok
1694 Types:
1696 Red = integer()
1698 Green = integer()
1699 Blue = integer()
1700 Alpha = integer()
1701 See color3b/3
1703 color4ub(Red, Green, Blue, Alpha) -> ok
1705 Types:
1707 Red = integer()
1709 Green = integer()
1710 Blue = integer()
1711 Alpha = integer()
1712 See color3b/3
1714 color4ui(Red, Green, Blue, Alpha) -> ok
1716 Types:
1718 Red = integer()
1720 Green = integer()
1721 Blue = integer()
1722 Alpha = integer()
1723 See color3b/3
1725 color4us(Red, Green, Blue, Alpha) -> ok
1727 Types:
1729 Red = integer()
1731 Green = integer()
1732 Blue = integer()
1733 Alpha = integer()
1734 See color3b/3
1736 color3bv(V) -> ok
1738 Types:
1740 V = {Red::integer(), Green::integer(), Blue::integer()}
1742 Equivalent to color3b(Red, Green, Blue).
1744 color3dv(V) -> ok
1746 Types:
1748 V = {Red::float(), Green::float(), Blue::float()}
1750 Equivalent to color3d(Red, Green, Blue).
1752 color3fv(V) -> ok
1754 Types:
1756 V = {Red::float(), Green::float(), Blue::float()}
1758 Equivalent to color3f(Red, Green, Blue).
1760 color3iv(V) -> ok
1762 Types:
1764 V = {Red::integer(), Green::integer(), Blue::integer()}
1766 Equivalent to color3i(Red, Green, Blue).
1768 color3sv(V) -> ok
1770 Types:
1772 V = {Red::integer(), Green::integer(), Blue::integer()}
1774 Equivalent to color3s(Red, Green, Blue).
1776 color3ubv(V) -> ok
1778 Types:
1780 V = {Red::integer(), Green::integer(), Blue::integer()}
1782 Equivalent to color3ub(Red, Green, Blue).
1784 color3uiv(V) -> ok
1786 Types:
1788 V = {Red::integer(), Green::integer(), Blue::integer()}
1790 Equivalent to color3ui(Red, Green, Blue).
1792 color3usv(V) -> ok
1794 Types:
1796 V = {Red::integer(), Green::integer(), Blue::integer()}
1798 Equivalent to color3us(Red, Green, Blue).
1800 color4bv(V) -> ok
1802 Types:
1804 V = {Red::integer(), Green::integer(), Blue::integer(),
1806 Alpha::integer()}
1807 Equivalent to color4b(Red, Green, Blue, Alpha).
1809 color4dv(V) -> ok
1811 Types:
1813 V = {Red::float(), Green::float(), Blue::float(),
1815 Alpha::float()}
1816 Equivalent to color4d(Red, Green, Blue, Alpha).
1818 color4fv(V) -> ok
1820 Types:
1822 V = {Red::float(), Green::float(), Blue::float(),
1824 Alpha::float()}
1825 Equivalent to color4f(Red, Green, Blue, Alpha).
1827 color4iv(V) -> ok
1829 Types:
1831 V = {Red::integer(), Green::integer(), Blue::integer(),
1833 Alpha::integer()}
1834 Equivalent to color4i(Red, Green, Blue, Alpha).
1836 color4sv(V) -> ok
1838 Types:
1840 V = {Red::integer(), Green::integer(), Blue::integer(),
1842 Alpha::integer()}
1843 Equivalent to color4s(Red, Green, Blue, Alpha).
1845 color4ubv(V) -> ok
1847 Types:
1849 V = {Red::integer(), Green::integer(), Blue::integer(),
1851 Alpha::integer()}
1852 Equivalent to color4ub(Red, Green, Blue, Alpha).
1854 color4uiv(V) -> ok
1856 Types:
1858 V = {Red::integer(), Green::integer(), Blue::integer(),
1860 Alpha::integer()}
1861 Equivalent to color4ui(Red, Green, Blue, Alpha).
1863 color4usv(V) -> ok
1865 Types:
1867 V = {Red::integer(), Green::integer(), Blue::integer(),
1869 Alpha::integer()}
1870 Equivalent to color4us(Red, Green, Blue, Alpha).
1872 texCoord1d(S) -> ok
1874 Types:
1876 S = float()
1878 Set the current texture coordinates
1880 gl:texCoord specifies texture coordinates in one, two, three, or
1882 four dimensions. gl:texCoord1 sets the current texture coordi‐
1883 nates to (s 0 0 1); a call to gl:texCoord2 sets them to (s t 0
1884 1). Similarly, gl:texCoord3 specifies the texture coordinates as
1885 (s t r 1), and gl:texCoord4 defines all four components explic‐
1886 itly as (s t r q).
1887 See external documentation.
1889 texCoord1f(S) -> ok
1891 Types:
1893 S = float()
1895 See texCoord1d/1
1897 texCoord1i(S) -> ok
1899 Types:
1901 S = integer()
1903 See texCoord1d/1
1905 texCoord1s(S) -> ok
1907 Types:
1909 S = integer()
1911 See texCoord1d/1
1913 texCoord2d(S, T) -> ok
1915 Types:
1917 S = float()
1919 T = float()
1920 See texCoord1d/1
1922 texCoord2f(S, T) -> ok
1924 Types:
1926 S = float()
1928 T = float()
1929 See texCoord1d/1
1931 texCoord2i(S, T) -> ok
1933 Types:
1935 S = integer()
1937 T = integer()
1938 See texCoord1d/1
1940 texCoord2s(S, T) -> ok
1942 Types:
1944 S = integer()
1946 T = integer()
1947 See texCoord1d/1
1949 texCoord3d(S, T, R) -> ok
1951 Types:
1953 S = float()
1955 T = float()
1956 R = float()
1957 See texCoord1d/1
1959 texCoord3f(S, T, R) -> ok
1961 Types:
1963 S = float()
1965 T = float()
1966 R = float()
1967 See texCoord1d/1
1969 texCoord3i(S, T, R) -> ok
1971 Types:
1973 S = integer()
1975 T = integer()
1976 R = integer()
1977 See texCoord1d/1
1979 texCoord3s(S, T, R) -> ok
1981 Types:
1983 S = integer()
1985 T = integer()
1986 R = integer()
1987 See texCoord1d/1
1989 texCoord4d(S, T, R, Q) -> ok
1991 Types:
1993 S = float()
1995 T = float()
1996 R = float()
1997 Q = float()
1998 See texCoord1d/1
2000 texCoord4f(S, T, R, Q) -> ok
2002 Types:
2004 S = float()
2006 T = float()
2007 R = float()
2008 Q = float()
2009 See texCoord1d/1
2011 texCoord4i(S, T, R, Q) -> ok
2013 Types:
2015 S = integer()
2017 T = integer()
2018 R = integer()
2019 Q = integer()
2020 See texCoord1d/1
2022 texCoord4s(S, T, R, Q) -> ok
2024 Types:
2026 S = integer()
2028 T = integer()
2029 R = integer()
2030 Q = integer()
2031 See texCoord1d/1
2033 texCoord1dv(V) -> ok
2035 Types:
2037 V = {S::float()}
2039 Equivalent to texCoord1d(S).
2041 texCoord1fv(V) -> ok
2043 Types:
2045 V = {S::float()}
2047 Equivalent to texCoord1f(S).
2049 texCoord1iv(V) -> ok
2051 Types:
2053 V = {S::integer()}
2055 Equivalent to texCoord1i(S).
2057 texCoord1sv(V) -> ok
2059 Types:
2061 V = {S::integer()}
2063 Equivalent to texCoord1s(S).
2065 texCoord2dv(V) -> ok
2067 Types:
2069 V = {S::float(), T::float()}
2071 Equivalent to texCoord2d(S, T).
2073 texCoord2fv(V) -> ok
2075 Types:
2077 V = {S::float(), T::float()}
2079 Equivalent to texCoord2f(S, T).
2081 texCoord2iv(V) -> ok
2083 Types:
2085 V = {S::integer(), T::integer()}
2087 Equivalent to texCoord2i(S, T).
2089 texCoord2sv(V) -> ok
2091 Types:
2093 V = {S::integer(), T::integer()}
2095 Equivalent to texCoord2s(S, T).
2097 texCoord3dv(V) -> ok
2099 Types:
2101 V = {S::float(), T::float(), R::float()}
2103 Equivalent to texCoord3d(S, T, R).
2105 texCoord3fv(V) -> ok
2107 Types:
2109 V = {S::float(), T::float(), R::float()}
2111 Equivalent to texCoord3f(S, T, R).
2113 texCoord3iv(V) -> ok
2115 Types:
2117 V = {S::integer(), T::integer(), R::integer()}
2119 Equivalent to texCoord3i(S, T, R).
2121 texCoord3sv(V) -> ok
2123 Types:
2125 V = {S::integer(), T::integer(), R::integer()}
2127 Equivalent to texCoord3s(S, T, R).
2129 texCoord4dv(V) -> ok
2131 Types:
2133 V = {S::float(), T::float(), R::float(), Q::float()}
2135 Equivalent to texCoord4d(S, T, R, Q).
2137 texCoord4fv(V) -> ok
2139 Types:
2141 V = {S::float(), T::float(), R::float(), Q::float()}
2143 Equivalent to texCoord4f(S, T, R, Q).
2145 texCoord4iv(V) -> ok
2147 Types:
2149 V = {S::integer(), T::integer(), R::integer(), Q::integer()}
2151 Equivalent to texCoord4i(S, T, R, Q).
2153 texCoord4sv(V) -> ok
2155 Types:
2157 V = {S::integer(), T::integer(), R::integer(), Q::integer()}
2159 Equivalent to texCoord4s(S, T, R, Q).
2161 rasterPos2d(X, Y) -> ok
2163 Types:
2165 X = float()
2167 Y = float()
2168 Specify the raster position for pixel operations
2170 The GL maintains a 3D position in window coordinates. This posi‐
2172 tion, called the raster position, is used to position pixel and
2173 bitmap write operations. It is maintained with subpixel accu‐
2174 racy. See gl:bitmap/7 , gl:drawPixels/5 , and gl:copyPixels/5 .
2175 See external documentation.
2177 rasterPos2f(X, Y) -> ok
2179 Types:
2181 X = float()
2183 Y = float()
2184 See rasterPos2d/2
2186 rasterPos2i(X, Y) -> ok
2188 Types:
2190 X = integer()
2192 Y = integer()
2193 See rasterPos2d/2
2195 rasterPos2s(X, Y) -> ok
2197 Types:
2199 X = integer()
2201 Y = integer()
2202 See rasterPos2d/2
2204 rasterPos3d(X, Y, Z) -> ok
2206 Types:
2208 X = float()
2210 Y = float()
2211 Z = float()
2212 See rasterPos2d/2
2214 rasterPos3f(X, Y, Z) -> ok
2216 Types:
2218 X = float()
2220 Y = float()
2221 Z = float()
2222 See rasterPos2d/2
2224 rasterPos3i(X, Y, Z) -> ok
2226 Types:
2228 X = integer()
2230 Y = integer()
2231 Z = integer()
2232 See rasterPos2d/2
2234 rasterPos3s(X, Y, Z) -> ok
2236 Types:
2238 X = integer()
2240 Y = integer()
2241 Z = integer()
2242 See rasterPos2d/2
2244 rasterPos4d(X, Y, Z, W) -> ok
2246 Types:
2248 X = float()
2250 Y = float()
2251 Z = float()
2252 W = float()
2253 See rasterPos2d/2
2255 rasterPos4f(X, Y, Z, W) -> ok
2257 Types:
2259 X = float()
2261 Y = float()
2262 Z = float()
2263 W = float()
2264 See rasterPos2d/2
2266 rasterPos4i(X, Y, Z, W) -> ok
2268 Types:
2270 X = integer()
2272 Y = integer()
2273 Z = integer()
2274 W = integer()
2275 See rasterPos2d/2
2277 rasterPos4s(X, Y, Z, W) -> ok
2279 Types:
2281 X = integer()
2283 Y = integer()
2284 Z = integer()
2285 W = integer()
2286 See rasterPos2d/2
2288 rasterPos2dv(V) -> ok
2290 Types:
2292 V = {X::float(), Y::float()}
2294 Equivalent to rasterPos2d(X, Y).
2296 rasterPos2fv(V) -> ok
2298 Types:
2300 V = {X::float(), Y::float()}
2302 Equivalent to rasterPos2f(X, Y).
2304 rasterPos2iv(V) -> ok
2306 Types:
2308 V = {X::integer(), Y::integer()}
2310 Equivalent to rasterPos2i(X, Y).
2312 rasterPos2sv(V) -> ok
2314 Types:
2316 V = {X::integer(), Y::integer()}
2318 Equivalent to rasterPos2s(X, Y).
2320 rasterPos3dv(V) -> ok
2322 Types:
2324 V = {X::float(), Y::float(), Z::float()}
2326 Equivalent to rasterPos3d(X, Y, Z).
2328 rasterPos3fv(V) -> ok
2330 Types:
2332 V = {X::float(), Y::float(), Z::float()}
2334 Equivalent to rasterPos3f(X, Y, Z).
2336 rasterPos3iv(V) -> ok
2338 Types:
2340 V = {X::integer(), Y::integer(), Z::integer()}
2342 Equivalent to rasterPos3i(X, Y, Z).
2344 rasterPos3sv(V) -> ok
2346 Types:
2348 V = {X::integer(), Y::integer(), Z::integer()}
2350 Equivalent to rasterPos3s(X, Y, Z).
2352 rasterPos4dv(V) -> ok
2354 Types:
2356 V = {X::float(), Y::float(), Z::float(), W::float()}
2358 Equivalent to rasterPos4d(X, Y, Z, W).
2360 rasterPos4fv(V) -> ok
2362 Types:
2364 V = {X::float(), Y::float(), Z::float(), W::float()}
2366 Equivalent to rasterPos4f(X, Y, Z, W).
2368 rasterPos4iv(V) -> ok
2370 Types:
2372 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
2374 Equivalent to rasterPos4i(X, Y, Z, W).
2376 rasterPos4sv(V) -> ok
2378 Types:
2380 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
2382 Equivalent to rasterPos4s(X, Y, Z, W).
2384 rectd(X1, Y1, X2, Y2) -> ok
2386 Types:
2388 X1 = float()
2390 Y1 = float()
2391 X2 = float()
2392 Y2 = float()
2393 Draw a rectangle
2395 gl:rect supports efficient specification of rectangles as two
2397 corner points. Each rectangle command takes four arguments,
2398 organized either as two consecutive pairs of (x y) coordinates
2399 or as two pointers to arrays, each containing an (x y) pair. The
2400 resulting rectangle is defined in the z=0 plane.
2401 See external documentation.
2403 rectf(X1, Y1, X2, Y2) -> ok
2405 Types:
2407 X1 = float()
2409 Y1 = float()
2410 X2 = float()
2411 Y2 = float()
2412 See rectd/4
2414 recti(X1, Y1, X2, Y2) -> ok
2416 Types:
2418 X1 = integer()
2420 Y1 = integer()
2421 X2 = integer()
2422 Y2 = integer()
2423 See rectd/4
2425 rects(X1, Y1, X2, Y2) -> ok
2427 Types:
2429 X1 = integer()
2431 Y1 = integer()
2432 X2 = integer()
2433 Y2 = integer()
2434 See rectd/4
2436 rectdv(V1, V2) -> ok
2438 Types:
2440 V1 = {float(), float()}
2442 V2 = {float(), float()}
2443 See rectd/4
2445 rectfv(V1, V2) -> ok
2447 Types:
2449 V1 = {float(), float()}
2451 V2 = {float(), float()}
2452 See rectd/4
2454 rectiv(V1, V2) -> ok
2456 Types:
2458 V1 = {integer(), integer()}
2460 V2 = {integer(), integer()}
2461 See rectd/4
2463 rectsv(V1, V2) -> ok
2465 Types:
2467 V1 = {integer(), integer()}
2469 V2 = {integer(), integer()}
2470 See rectd/4
2472 vertexPointer(Size, Type, Stride, Ptr) -> ok
2474 Types:
2476 Size = integer()
2478 Type = enum()
2479 Stride = integer()
2480 Ptr = offset() | mem()
2481 Define an array of vertex data
2483 gl:vertexPointer specifies the location and data format of an
2485 array of vertex coordinates to use when rendering. Size speci‐
2486 fies the number of coordinates per vertex, and must be 2, 3, or
2487 4. Type specifies the data type of each coordinate, and Stride
2488 specifies the byte stride from one vertex to the next, allowing
2489 vertices and attributes to be packed into a single array or
2490 stored in separate arrays. (Single-array storage may be more
2491 efficient on some implementations; see gl:interleavedArrays/3 .)
2492 See external documentation.
2494 normalPointer(Type, Stride, Ptr) -> ok
2496 Types:
2498 Type = enum()
2500 Stride = integer()
2501 Ptr = offset() | mem()
2502 Define an array of normals
2504 gl:normalPointer specifies the location and data format of an
2506 array of normals to use when rendering. Type specifies the data
2507 type of each normal coordinate, and Stride specifies the byte
2508 stride from one normal to the next, allowing vertices and
2509 attributes to be packed into a single array or stored in sepa‐
2510 rate arrays. (Single-array storage may be more efficient on some
2511 implementations; see gl:interleavedArrays/3 .)
2512 See external documentation.
2514 colorPointer(Size, Type, Stride, Ptr) -> ok
2516 Types:
2518 Size = integer()
2520 Type = enum()
2521 Stride = integer()
2522 Ptr = offset() | mem()
2523 Define an array of colors
2525 gl:colorPointer specifies the location and data format of an
2527 array of color components to use when rendering. Size specifies
2528 the number of components per color, and must be 3 or 4. Type
2529 specifies the data type of each color component, and Stride
2530 specifies the byte stride from one color to the next, allowing
2531 vertices and attributes to be packed into a single array or
2532 stored in separate arrays. (Single-array storage may be more
2533 efficient on some implementations; see gl:interleavedArrays/3 .)
2534 See external documentation.
2536 indexPointer(Type, Stride, Ptr) -> ok
2538 Types:
2540 Type = enum()
2542 Stride = integer()
2543 Ptr = offset() | mem()
2544 Define an array of color indexes
2546 gl:indexPointer specifies the location and data format of an
2548 array of color indexes to use when rendering. Type specifies the
2549 data type of each color index and Stride specifies the byte
2550 stride from one color index to the next, allowing vertices and
2551 attributes to be packed into a single array or stored in sepa‐
2552 rate arrays.
2553 See external documentation.
2555 texCoordPointer(Size, Type, Stride, Ptr) -> ok
2557 Types:
2559 Size = integer()
2561 Type = enum()
2562 Stride = integer()
2563 Ptr = offset() | mem()
2564 Define an array of texture coordinates
2566 gl:texCoordPointer specifies the location and data format of an
2568 array of texture coordinates to use when rendering. Size speci‐
2569 fies the number of coordinates per texture coordinate set, and
2570 must be 1, 2, 3, or 4. Type specifies the data type of each tex‐
2571 ture coordinate, and Stride specifies the byte stride from one
2572 texture coordinate set to the next, allowing vertices and
2573 attributes to be packed into a single array or stored in sepa‐
2574 rate arrays. (Single-array storage may be more efficient on some
2575 implementations; see gl:interleavedArrays/3 .)
2576 See external documentation.
2578 edgeFlagPointer(Stride, Ptr) -> ok
2580 Types:
2582 Stride = integer()
2584 Ptr = offset() | mem()
2585 Define an array of edge flags
2587 gl:edgeFlagPointer specifies the location and data format of an
2589 array of boolean edge flags to use when rendering. Stride speci‐
2590 fies the byte stride from one edge flag to the next, allowing
2591 vertices and attributes to be packed into a single array or
2592 stored in separate arrays.
2593 See external documentation.
2595 arrayElement(I) -> ok
2597 Types:
2599 I = integer()
2601 Render a vertex using the specified vertex array element
2603 gl:arrayElement commands are used within gl:'begin'/1 /
2605 gl:'begin'/1 pairs to specify vertex and attribute data for
2606 point, line, and polygon primitives. If ?GL_VERTEX_ARRAY is
2607 enabled when gl:arrayElement is called, a single vertex is
2608 drawn, using vertex and attribute data taken from location I of
2609 the enabled arrays. If ?GL_VERTEX_ARRAY is not enabled, no draw‐
2610 ing occurs but the attributes corresponding to the enabled
2611 arrays are modified.
2612 See external documentation.
2614 drawArrays(Mode, First, Count) -> ok
2616 Types:
2618 Mode = enum()
2620 First = integer()
2621 Count = integer()
2622 Render primitives from array data
2624 gl:drawArrays specifies multiple geometric primitives with very
2626 few subroutine calls. Instead of calling a GL procedure to pass
2627 each individual vertex, normal, texture coordinate, edge flag,
2628 or color, you can prespecify separate arrays of vertices, nor‐
2629 mals, and colors and use them to construct a sequence of primi‐
2630 tives with a single call to gl:drawArrays .
2631 See external documentation.
2633 drawElements(Mode, Count, Type, Indices) -> ok
2635 Types:
2637 Mode = enum()
2639 Count = integer()
2640 Type = enum()
2641 Indices = offset() | mem()
2642 Render primitives from array data
2644 gl:drawElements specifies multiple geometric primitives with
2646 very few subroutine calls. Instead of calling a GL function to
2647 pass each individual vertex, normal, texture coordinate, edge
2648 flag, or color, you can prespecify separate arrays of vertices,
2649 normals, and so on, and use them to construct a sequence of
2650 primitives with a single call to gl:drawElements .
2651 See external documentation.
2653 interleavedArrays(Format, Stride, Pointer) -> ok
2655 Types:
2657 Format = enum()
2659 Stride = integer()
2660 Pointer = offset() | mem()
2661 Simultaneously specify and enable several interleaved arrays
2663 gl:interleavedArrays lets you specify and enable individual
2665 color, normal, texture and vertex arrays whose elements are part
2666 of a larger aggregate array element. For some implementations,
2667 this is more efficient than specifying the arrays separately.
2668 See external documentation.
2670 shadeModel(Mode) -> ok
2672 Types:
2674 Mode = enum()
2676 Select flat or smooth shading
2678 GL primitives can have either flat or smooth shading. Smooth
2680 shading, the default, causes the computed colors of vertices to
2681 be interpolated as the primitive is rasterized, typically
2682 assigning different colors to each resulting pixel fragment.
2683 Flat shading selects the computed color of just one vertex and
2684 assigns it to all the pixel fragments generated by rasterizing a
2685 single primitive. In either case, the computed color of a vertex
2686 is the result of lighting if lighting is enabled, or it is the
2687 current color at the time the vertex was specified if lighting
2688 is disabled.
2689 See external documentation.
2691 lightf(Light, Pname, Param) -> ok
2693 Types:
2695 Light = enum()
2697 Pname = enum()
2698 Param = float()
2699 Set light source parameters
2701 gl:light sets the values of individual light source parameters.
2703 Light names the light and is a symbolic name of the form
2704 ?GL_LIGHT i, where i ranges from 0 to the value of
2705 ?GL_MAX_LIGHTS - 1. Pname specifies one of ten light source
2706 parameters, again by symbolic name. Params is either a single
2707 value or a pointer to an array that contains the new values.
2708 See external documentation.
2710 lighti(Light, Pname, Param) -> ok
2712 Types:
2714 Light = enum()
2716 Pname = enum()
2717 Param = integer()
2718 See lightf/3
2720 lightfv(Light, Pname, Params) -> ok
2722 Types:
2724 Light = enum()
2726 Pname = enum()
2727 Params = tuple()
2728 See lightf/3
2730 lightiv(Light, Pname, Params) -> ok
2732 Types:
2734 Light = enum()
2736 Pname = enum()
2737 Params = tuple()
2738 See lightf/3
2740 getLightfv(Light, Pname) -> {float(), float(), float(), float()}
2742 Types:
2744 Light = enum()
2746 Pname = enum()
2747 Return light source parameter values
2749 gl:getLight returns in Params the value or values of a light
2751 source parameter. Light names the light and is a symbolic name
2752 of the form ?GL_LIGHT i where i ranges from 0 to the value of
2753 ?GL_MAX_LIGHTS - 1. ?GL_MAX_LIGHTS is an implementation depen‐
2754 dent constant that is greater than or equal to eight. Pname
2755 specifies one of ten light source parameters, again by symbolic
2756 name.
2757 See external documentation.
2759 getLightiv(Light, Pname) -> {integer(), integer(), integer(), inte‐
2761 ger()}
2762 Types:
2764 Light = enum()
2766 Pname = enum()
2767 See getLightfv/2
2769 lightModelf(Pname, Param) -> ok
2771 Types:
2773 Pname = enum()
2775 Param = float()
2776 Set the lighting model parameters
2778 gl:lightModel sets the lighting model parameter. Pname names a
2780 parameter and Params gives the new value. There are three light‐
2781 ing model parameters:
2782 See external documentation.
2784 lightModeli(Pname, Param) -> ok
2786 Types:
2788 Pname = enum()
2790 Param = integer()
2791 See lightModelf/2
2793 lightModelfv(Pname, Params) -> ok
2795 Types:
2797 Pname = enum()
2799 Params = tuple()
2800 See lightModelf/2
2802 lightModeliv(Pname, Params) -> ok
2804 Types:
2806 Pname = enum()
2808 Params = tuple()
2809 See lightModelf/2
2811 materialf(Face, Pname, Param) -> ok
2813 Types:
2815 Face = enum()
2817 Pname = enum()
2818 Param = float()
2819 Specify material parameters for the lighting model
2821 gl:material assigns values to material parameters. There are two
2823 matched sets of material parameters. One, the front-facing set,
2824 is used to shade points, lines, bitmaps, and all polygons (when
2825 two-sided lighting is disabled), or just front-facing polygons
2826 (when two-sided lighting is enabled). The other set, back-fac‐
2827 ing, is used to shade back-facing polygons only when two-sided
2828 lighting is enabled. Refer to the gl:lightModelf/2 reference
2829 page for details concerning one- and two-sided lighting calcula‐
2830 tions.
2831 See external documentation.
2833 materiali(Face, Pname, Param) -> ok
2835 Types:
2837 Face = enum()
2839 Pname = enum()
2840 Param = integer()
2841 See materialf/3
2843 materialfv(Face, Pname, Params) -> ok
2845 Types:
2847 Face = enum()
2849 Pname = enum()
2850 Params = tuple()
2851 See materialf/3
2853 materialiv(Face, Pname, Params) -> ok
2855 Types:
2857 Face = enum()
2859 Pname = enum()
2860 Params = tuple()
2861 See materialf/3
2863 getMaterialfv(Face, Pname) -> {float(), float(), float(), float()}
2865 Types:
2867 Face = enum()
2869 Pname = enum()
2870 Return material parameters
2872 gl:getMaterial returns in Params the value or values of parame‐
2874 ter Pname of material Face . Six parameters are defined:
2875 See external documentation.
2877 getMaterialiv(Face, Pname) -> {integer(), integer(), integer(), inte‐
2879 ger()}
2880 Types:
2882 Face = enum()
2884 Pname = enum()
2885 See getMaterialfv/2
2887 colorMaterial(Face, Mode) -> ok
2889 Types:
2891 Face = enum()
2893 Mode = enum()
2894 Cause a material color to track the current color
2896 gl:colorMaterial specifies which material parameters track the
2898 current color. When ?GL_COLOR_MATERIAL is enabled, the material
2899 parameter or parameters specified by Mode , of the material or
2900 materials specified by Face , track the current color at all
2901 times.
2902 See external documentation.
2904 pixelZoom(Xfactor, Yfactor) -> ok
2906 Types:
2908 Xfactor = float()
2910 Yfactor = float()
2911 Specify the pixel zoom factors
2913 gl:pixelZoom specifies values for the x and y zoom factors. Dur‐
2915 ing the execution of gl:drawPixels/5 or gl:copyPixels/5 , if (
2916 xr, yr) is the current raster position, and a given element is
2917 in the mth row and nth column of the pixel rectangle, then pix‐
2918 els whose centers are in the rectangle with corners at
2919 See external documentation.
2921 pixelStoref(Pname, Param) -> ok
2923 Types:
2925 Pname = enum()
2927 Param = float()
2928 Set pixel storage modes
2930 gl:pixelStore sets pixel storage modes that affect the operation
2932 of subsequent gl:readPixels/7 as well as the unpacking of tex‐
2933 ture patterns (see gl:texImage1D/8 , gl:texImage2D/9 , gl:texIm‐
2934 age3D/10 , gl:texSubImage1D/7 , gl:texSubImage1D/7 , gl:tex‐
2935 SubImage1D/7 ), gl:compressedTexImage1D/7 , gl:compressedTexIm‐
2936 age2D/8 , gl:compressedTexImage3D/9 , gl:compressedTexSubIm‐
2937 age1D/7 , gl:compressedTexSubImage2D/9 or gl:compressedTexSubIm‐
2938 age1D/7 .
2939 See external documentation.
2941 pixelStorei(Pname, Param) -> ok
2943 Types:
2945 Pname = enum()
2947 Param = integer()
2948 See pixelStoref/2
2950 pixelTransferf(Pname, Param) -> ok
2952 Types:
2954 Pname = enum()
2956 Param = float()
2957 Set pixel transfer modes
2959 gl:pixelTransfer sets pixel transfer modes that affect the oper‐
2961 ation of subsequent gl:copyPixels/5 , gl:copyTexImage1D/7 ,
2962 gl:copyTexImage2D/8 , gl:copyTexSubImage1D/6 , gl:copyTexSubIm‐
2963 age2D/8 , gl:copyTexSubImage3D/9 , gl:drawPixels/5 , gl:readPix‐
2964 els/7 , gl:texImage1D/8 , gl:texImage2D/9 , gl:texImage3D/10 ,
2965 gl:texSubImage1D/7 , gl:texSubImage1D/7 , and gl:texSubImage1D/7
2966 commands. Additionally, if the ARB_imaging subset is supported,
2967 the routines gl:colorTable/6 , gl:colorSubTable/6 , gl:convolu‐
2968 tionFilter1D/6 , gl:convolutionFilter2D/7 , gl:histogram/4 ,
2969 gl:minmax/3 , and gl:separableFilter2D/8 are also affected. The
2970 algorithms that are specified by pixel transfer modes operate on
2971 pixels after they are read from the frame buffer ( gl:copyPix‐
2972 els/5 gl:copyTexImage1D/7 , gl:copyTexImage2D/8 , gl:copyTex‐
2973 SubImage1D/6 , gl:copyTexSubImage2D/8 , gl:copyTexSubImage3D/9 ,
2974 and gl:readPixels/7 ), or unpacked from client memory ( gl:draw‐
2975 Pixels/5 , gl:texImage1D/8 , gl:texImage2D/9 , gl:texImage3D/10
2976 , gl:texSubImage1D/7 , gl:texSubImage1D/7 , and gl:texSubIm‐
2977 age1D/7 ). Pixel transfer operations happen in the same order,
2978 and in the same manner, regardless of the command that resulted
2979 in the pixel operation. Pixel storage modes (see gl:pixel‐
2980 Storef/2 ) control the unpacking of pixels being read from
2981 client memory and the packing of pixels being written back into
2982 client memory.
2983 See external documentation.
2985 pixelTransferi(Pname, Param) -> ok
2987 Types:
2989 Pname = enum()
2991 Param = integer()
2992 See pixelTransferf/2
2994 pixelMapfv(Map, Mapsize, Values) -> ok
2996 Types:
2998 Map = enum()
3000 Mapsize = integer()
3001 Values = binary()
3002 Set up pixel transfer maps
3004 gl:pixelMap sets up translation tables, or maps, used by
3006 gl:copyPixels/5 , gl:copyTexImage1D/7 , gl:copyTexImage2D/8 ,
3007 gl:copyTexSubImage1D/6 , gl:copyTexSubImage2D/8 , gl:copyTex‐
3008 SubImage3D/9 , gl:drawPixels/5 , gl:readPixels/7 , gl:texIm‐
3009 age1D/8 , gl:texImage2D/9 , gl:texImage3D/10 , gl:texSubIm‐
3010 age1D/7 , gl:texSubImage1D/7 , and gl:texSubImage1D/7 . Addi‐
3011 tionally, if the ARB_imaging subset is supported, the routines
3012 gl:colorTable/6 , gl:colorSubTable/6 , gl:convolutionFilter1D/6
3013 , gl:convolutionFilter2D/7 , gl:histogram/4 , gl:minmax/3 , and
3014 gl:separableFilter2D/8 . Use of these maps is described com‐
3015 pletely in the gl:pixelTransferf/2 reference page, and partly in
3016 the reference pages for the pixel and texture image commands.
3017 Only the specification of the maps is described in this refer‐
3018 ence page.
3019 See external documentation.
3021 pixelMapuiv(Map, Mapsize, Values) -> ok
3023 Types:
3025 Map = enum()
3027 Mapsize = integer()
3028 Values = binary()
3029 See pixelMapfv/3
3031 pixelMapusv(Map, Mapsize, Values) -> ok
3033 Types:
3035 Map = enum()
3037 Mapsize = integer()
3038 Values = binary()
3039 See pixelMapfv/3
3041 getPixelMapfv(Map, Values) -> ok
3043 Types:
3045 Map = enum()
3047 Values = mem()
3048 Return the specified pixel map
3050 See the gl:pixelMapfv/3 reference page for a description of the
3052 acceptable values for the Map parameter. gl:getPixelMap returns
3053 in Data the contents of the pixel map specified in Map . Pixel
3054 maps are used during the execution of gl:readPixels/7 , gl:draw‐
3055 Pixels/5 , gl:copyPixels/5 , gl:texImage1D/8 , gl:texImage2D/9 ,
3056 gl:texImage3D/10 , gl:texSubImage1D/7 , gl:texSubImage1D/7 ,
3057 gl:texSubImage1D/7 , gl:copyTexImage1D/7 , gl:copyTexImage2D/8 ,
3058 gl:copyTexSubImage1D/6 , gl:copyTexSubImage2D/8 , and gl:copy‐
3059 TexSubImage3D/9 . to map color indices, stencil indices, color
3060 components, and depth components to other values.
3061 See external documentation.
3063 getPixelMapuiv(Map, Values) -> ok
3065 Types:
3067 Map = enum()
3069 Values = mem()
3070 See getPixelMapfv/2
3072 getPixelMapusv(Map, Values) -> ok
3074 Types:
3076 Map = enum()
3078 Values = mem()
3079 See getPixelMapfv/2
3081 bitmap(Width, Height, Xorig, Yorig, Xmove, Ymove, Bitmap) -> ok
3083 Types:
3085 Width = integer()
3087 Height = integer()
3088 Xorig = float()
3089 Yorig = float()
3090 Xmove = float()
3091 Ymove = float()
3092 Bitmap = offset() | mem()
3093 Draw a bitmap
3095 A bitmap is a binary image. When drawn, the bitmap is positioned
3097 relative to the current raster position, and frame buffer pixels
3098 corresponding to 1's in the bitmap are written using the current
3099 raster color or index. Frame buffer pixels corresponding to 0's
3100 in the bitmap are not modified.
3101 See external documentation.
3103 readPixels(X, Y, Width, Height, Format, Type, Pixels) -> ok
3105 Types:
3107 X = integer()
3109 Y = integer()
3110 Width = integer()
3111 Height = integer()
3112 Format = enum()
3113 Type = enum()
3114 Pixels = mem()
3115 Read a block of pixels from the frame buffer
3117 gl:readPixels returns pixel data from the frame buffer, starting
3119 with the pixel whose lower left corner is at location ( X , Y ),
3120 into client memory starting at location Data . Several parame‐
3121 ters control the processing of the pixel data before it is
3122 placed into client memory. These parameters are set with gl:pix‐
3123 elStoref/2 . This reference page describes the effects on
3124 gl:readPixels of most, but not all of the parameters specified
3125 by these three commands.
3126 See external documentation.
3128 drawPixels(Width, Height, Format, Type, Pixels) -> ok
3130 Types:
3132 Width = integer()
3134 Height = integer()
3135 Format = enum()
3136 Type = enum()
3137 Pixels = offset() | mem()
3138 Write a block of pixels to the frame buffer
3140 gl:drawPixels reads pixel data from memory and writes it into
3142 the frame buffer relative to the current raster position, pro‐
3143 vided that the raster position is valid. Use gl:rasterPos2d/2 or
3144 gl:windowPos2d/2 to set the current raster position; use gl:get‐
3145 Booleanv/1 with argument ?GL_CURRENT_RASTER_POSITION_VALID to
3146 determine if the specified raster position is valid, and gl:get‐
3147 Booleanv/1 with argument ?GL_CURRENT_RASTER_POSITION to query
3148 the raster position.
3149 See external documentation.
3151 copyPixels(X, Y, Width, Height, Type) -> ok
3153 Types:
3155 X = integer()
3157 Y = integer()
3158 Width = integer()
3159 Height = integer()
3160 Type = enum()
3161 Copy pixels in the frame buffer
3163 gl:copyPixels copies a screen-aligned rectangle of pixels from
3165 the specified frame buffer location to a region relative to the
3166 current raster position. Its operation is well defined only if
3167 the entire pixel source region is within the exposed portion of
3168 the window. Results of copies from outside the window, or from
3169 regions of the window that are not exposed, are hardware depen‐
3170 dent and undefined.
3171 See external documentation.
3173 stencilFunc(Func, Ref, Mask) -> ok
3175 Types:
3177 Func = enum()
3179 Ref = integer()
3180 Mask = integer()
3181 Set front and back function and reference value for stencil
3183 testing
3184 Stenciling, like depth-buffering, enables and disables drawing
3186 on a per-pixel basis. Stencil planes are first drawn into using
3187 GL drawing primitives, then geometry and images are rendered
3188 using the stencil planes to mask out portions of the screen.
3189 Stenciling is typically used in multipass rendering algorithms
3190 to achieve special effects, such as decals, outlining, and con‐
3191 structive solid geometry rendering.
3192 See external documentation.
3194 stencilMask(Mask) -> ok
3196 Types:
3198 Mask = integer()
3200 Control the front and back writing of individual bits in the
3202 stencil planes
3203 gl:stencilMask controls the writing of individual bits in the
3205 stencil planes. The least significant n bits of Mask , where n
3206 is the number of bits in the stencil buffer, specify a mask.
3207 Where a 1 appears in the mask, it's possible to write to the
3208 corresponding bit in the stencil buffer. Where a 0 appears, the
3209 corresponding bit is write-protected. Initially, all bits are
3210 enabled for writing.
3211 See external documentation.
3213 stencilOp(Fail, Zfail, Zpass) -> ok
3215 Types:
3217 Fail = enum()
3219 Zfail = enum()
3220 Zpass = enum()
3221 Set front and back stencil test actions
3223 Stenciling, like depth-buffering, enables and disables drawing
3225 on a per-pixel basis. You draw into the stencil planes using GL
3226 drawing primitives, then render geometry and images, using the
3227 stencil planes to mask out portions of the screen. Stenciling is
3228 typically used in multipass rendering algorithms to achieve spe‐
3229 cial effects, such as decals, outlining, and constructive solid
3230 geometry rendering.
3231 See external documentation.
3233 clearStencil(S) -> ok
3235 Types:
3237 S = integer()
3239 Specify the clear value for the stencil buffer
3241 gl:clearStencil specifies the index used by gl:clear/1 to clear
3243 the stencil buffer. S is masked with 2 m-1, where m is the num‐
3244 ber of bits in the stencil buffer.
3245 See external documentation.
3247 texGend(Coord, Pname, Param) -> ok
3249 Types:
3251 Coord = enum()
3253 Pname = enum()
3254 Param = float()
3255 Control the generation of texture coordinates
3257 gl:texGen selects a texture-coordinate generation function or
3259 supplies coefficients for one of the functions. Coord names one
3260 of the (s, t, r, q ) texture coordinates; it must be one of the
3261 symbols ?GL_S, ?GL_T, ?GL_R , or ?GL_Q. Pname must be one of
3262 three symbolic constants: ?GL_TEXTURE_GEN_MODE ,
3263 ?GL_OBJECT_PLANE, or ?GL_EYE_PLANE. If Pname is ?GL_TEX‐
3264 TURE_GEN_MODE , then Params chooses a mode, one of
3265 ?GL_OBJECT_LINEAR, ?GL_EYE_LINEAR , ?GL_SPHERE_MAP, ?GL_NOR‐
3266 MAL_MAP, or ?GL_REFLECTION_MAP. If Pname is either
3267 ?GL_OBJECT_PLANE or ?GL_EYE_PLANE, Params contains coefficients
3268 for the corresponding texture generation function.
3269 See external documentation.
3271 texGenf(Coord, Pname, Param) -> ok
3273 Types:
3275 Coord = enum()
3277 Pname = enum()
3278 Param = float()
3279 See texGend/3
3281 texGeni(Coord, Pname, Param) -> ok
3283 Types:
3285 Coord = enum()
3287 Pname = enum()
3288 Param = integer()
3289 See texGend/3
3291 texGendv(Coord, Pname, Params) -> ok
3293 Types:
3295 Coord = enum()
3297 Pname = enum()
3298 Params = tuple()
3299 See texGend/3
3301 texGenfv(Coord, Pname, Params) -> ok
3303 Types:
3305 Coord = enum()
3307 Pname = enum()
3308 Params = tuple()
3309 See texGend/3
3311 texGeniv(Coord, Pname, Params) -> ok
3313 Types:
3315 Coord = enum()
3317 Pname = enum()
3318 Params = tuple()
3319 See texGend/3
3321 getTexGendv(Coord, Pname) -> {float(), float(), float(), float()}
3323 Types:
3325 Coord = enum()
3327 Pname = enum()
3328 Return texture coordinate generation parameters
3330 gl:getTexGen returns in Params selected parameters of a texture
3332 coordinate generation function that was specified using gl:tex‐
3333 Gend/3 . Coord names one of the (s, t, r, q) texture coordi‐
3334 nates, using the symbolic constant ?GL_S, ?GL_T, ?GL_R, or
3335 ?GL_Q.
3336 See external documentation.
3338 getTexGenfv(Coord, Pname) -> {float(), float(), float(), float()}
3340 Types:
3342 Coord = enum()
3344 Pname = enum()
3345 See getTexGendv/2
3347 getTexGeniv(Coord, Pname) -> {integer(), integer(), integer(), inte‐
3349 ger()}
3350 Types:
3352 Coord = enum()
3354 Pname = enum()
3355 See getTexGendv/2
3357 texEnvf(Target, Pname, Param) -> ok
3359 Types:
3361 Target = enum()
3363 Pname = enum()
3364 Param = float()
3365 glTexEnvf
3367 See external documentation.
3369 texEnvi(Target, Pname, Param) -> ok
3371 Types:
3373 Target = enum()
3375 Pname = enum()
3376 Param = integer()
3377 glTexEnvi
3379 See external documentation.
3381 texEnvfv(Target, Pname, Params) -> ok
3383 Types:
3385 Target = enum()
3387 Pname = enum()
3388 Params = tuple()
3389 Set texture environment parameters
3391 A texture environment specifies how texture values are inter‐
3393 preted when a fragment is textured. When Target is ?GL_TEX‐
3394 TURE_FILTER_CONTROL, Pname must be ?GL_TEXTURE_LOD_BIAS . When
3395 Target is ?GL_TEXTURE_ENV, Pname can be ?GL_TEXTURE_ENV_MODE ,
3396 ?GL_TEXTURE_ENV_COLOR, ?GL_COMBINE_RGB, ?GL_COMBINE_ALPHA,
3397 ?GL_RGB_SCALE , ?GL_ALPHA_SCALE, ?GL_SRC0_RGB, ?GL_SRC1_RGB,
3398 ?GL_SRC2_RGB, ?GL_SRC0_ALPHA , ?GL_SRC1_ALPHA, or
3399 ?GL_SRC2_ALPHA.
3400 See external documentation.
3402 texEnviv(Target, Pname, Params) -> ok
3404 Types:
3406 Target = enum()
3408 Pname = enum()
3409 Params = tuple()
3410 See texEnvfv/3
3412 getTexEnvfv(Target, Pname) -> {float(), float(), float(), float()}
3414 Types:
3416 Target = enum()
3418 Pname = enum()
3419 Return texture environment parameters
3421 gl:getTexEnv returns in Params selected values of a texture
3423 environment that was specified with gl:texEnvfv/3 . Target spec‐
3424 ifies a texture environment.
3425 See external documentation.
3427 getTexEnviv(Target, Pname) -> {integer(), integer(), integer(), inte‐
3429 ger()}
3430 Types:
3432 Target = enum()
3434 Pname = enum()
3435 See getTexEnvfv/2
3437 texParameterf(Target, Pname, Param) -> ok
3439 Types:
3441 Target = enum()
3443 Pname = enum()
3444 Param = float()
3445 Set texture parameters
3447 gl:texParameter assigns the value or values in Params to the
3449 texture parameter specified as Pname . Target defines the target
3450 texture, either ?GL_TEXTURE_1D , ?GL_TEXTURE_2D, ?GL_TEX‐
3451 TURE_1D_ARRAY, ?GL_TEXTURE_2D_ARRAY, ?GL_TEXTURE_RECTANGLE , or
3452 ?GL_TEXTURE_3D. The following symbols are accepted in Pname :
3453 See external documentation.
3455 texParameteri(Target, Pname, Param) -> ok
3457 Types:
3459 Target = enum()
3461 Pname = enum()
3462 Param = integer()
3463 See texParameterf/3
3465 texParameterfv(Target, Pname, Params) -> ok
3467 Types:
3469 Target = enum()
3471 Pname = enum()
3472 Params = tuple()
3473 See texParameterf/3
3475 texParameteriv(Target, Pname, Params) -> ok
3477 Types:
3479 Target = enum()
3481 Pname = enum()
3482 Params = tuple()
3483 See texParameterf/3
3485 getTexParameterfv(Target, Pname) -> {float(), float(), float(),
3487 float()}
3488 Types:
3490 Target = enum()
3492 Pname = enum()
3493 Return texture parameter values
3495 gl:getTexParameter returns in Params the value or values of the
3497 texture parameter specified as Pname . Target defines the target
3498 texture. ?GL_TEXTURE_1D, ?GL_TEXTURE_2D, ?GL_TEXTURE_3D,
3499 ?GL_TEXTURE_1D_ARRAY, ?GL_TEXTURE_2D_ARRAY , ?GL_TEXTURE_RECTAN‐
3500 GLE, ?GL_TEXTURE_CUBE_MAP, ?GL_TEXTURE_CUBE_MAP_ARRAY specify
3501 one-, two-, or three-dimensional, one-dimensional array, two-
3502 dimensional array, rectangle, cube-mapped or cube-mapped array
3503 texturing, respectively. Pname accepts the same symbols as
3504 gl:texParameterf/3 , with the same interpretations:
3505 See external documentation.
3507 getTexParameteriv(Target, Pname) -> {integer(), integer(), integer(),
3509 integer()}
3510 Types:
3512 Target = enum()
3514 Pname = enum()
3515 See getTexParameterfv/2
3517 getTexLevelParameterfv(Target, Level, Pname) -> {float()}
3519 Types:
3521 Target = enum()
3523 Level = integer()
3524 Pname = enum()
3525 Return texture parameter values for a specific level of detail
3527 gl:getTexLevelParameter returns in Params texture parameter val‐
3529 ues for a specific level-of-detail value, specified as Level .
3530 Target defines the target texture, either ?GL_TEXTURE_1D,
3531 ?GL_TEXTURE_2D, ?GL_TEXTURE_3D, ?GL_PROXY_TEXTURE_1D ,
3532 ?GL_PROXY_TEXTURE_2D, ?GL_PROXY_TEXTURE_3D, ?GL_TEX‐
3533 TURE_CUBE_MAP_POSITIVE_X , ?GL_TEXTURE_CUBE_MAP_NEGATIVE_X,
3534 ?GL_TEXTURE_CUBE_MAP_POSITIVE_Y, ?GL_TEXTURE_CUBE_MAP_NEGATIVE_Y
3535 , ?GL_TEXTURE_CUBE_MAP_POSITIVE_Z, ?GL_TEXTURE_CUBE_MAP_NEGA‐
3536 TIVE_Z, or ?GL_PROXY_TEXTURE_CUBE_MAP .
3537 See external documentation.
3539 getTexLevelParameteriv(Target, Level, Pname) -> {integer()}
3541 Types:
3543 Target = enum()
3545 Level = integer()
3546 Pname = enum()
3547 See getTexLevelParameterfv/3
3549 texImage1D(Target, Level, InternalFormat, Width, Border, Format, Type,
3551 Pixels) -> ok
3552 Types:
3554 Target = enum()
3556 Level = integer()
3557 InternalFormat = integer()
3558 Width = integer()
3559 Border = integer()
3560 Format = enum()
3561 Type = enum()
3562 Pixels = offset() | mem()
3563 Specify a one-dimensional texture image
3565 Texturing maps a portion of a specified texture image onto each
3567 graphical primitive for which texturing is enabled. To enable
3568 and disable one-dimensional texturing, call gl:enable/1 and
3569 gl:enable/1 with argument ?GL_TEXTURE_1D.
3570 See external documentation.
3572 texImage2D(Target, Level, InternalFormat, Width, Height, Border, For‐
3574 mat, Type, Pixels) -> ok
3575 Types:
3577 Target = enum()
3579 Level = integer()
3580 InternalFormat = integer()
3581 Width = integer()
3582 Height = integer()
3583 Border = integer()
3584 Format = enum()
3585 Type = enum()
3586 Pixels = offset() | mem()
3587 Specify a two-dimensional texture image
3589 Texturing allows elements of an image array to be read by
3591 shaders.
3592 See external documentation.
3594 getTexImage(Target, Level, Format, Type, Pixels) -> ok
3596 Types:
3598 Target = enum()
3600 Level = integer()
3601 Format = enum()
3602 Type = enum()
3603 Pixels = mem()
3604 Return a texture image
3606 gl:getTexImage returns a texture image into Img . Target speci‐
3608 fies whether the desired texture image is one specified by
3609 gl:texImage1D/8 (?GL_TEXTURE_1D ), gl:texImage2D/9 (?GL_TEX‐
3610 TURE_1D_ARRAY, ?GL_TEXTURE_RECTANGLE, ?GL_TEXTURE_2D or any of
3611 ?GL_TEXTURE_CUBE_MAP_*), or gl:texImage3D/10 (?GL_TEX‐
3612 TURE_2D_ARRAY , ?GL_TEXTURE_3D). Level specifies the level-of-
3613 detail number of the desired image. Format and Type specify the
3614 format and type of the desired image array. See the reference
3615 page for gl:texImage1D/8 for a description of the acceptable
3616 values for the Format and Type parameters, respectively.
3617 See external documentation.
3619 genTextures(N) -> [integer()]
3621 Types:
3623 N = integer()
3625 Generate texture names
3627 gl:genTextures returns N texture names in Textures . There is no
3629 guarantee that the names form a contiguous set of integers; how‐
3630 ever, it is guaranteed that none of the returned names was in
3631 use immediately before the call to gl:genTextures.
3632 See external documentation.
3634 deleteTextures(Textures) -> ok
3636 Types:
3638 Textures = [integer()]
3640 Delete named textures
3642 gl:deleteTextures deletes N textures named by the elements of
3644 the array Textures . After a texture is deleted, it has no con‐
3645 tents or dimensionality, and its name is free for reuse (for
3646 example by gl:genTextures/1 ). If a texture that is currently
3647 bound is deleted, the binding reverts to 0 (the default tex‐
3648 ture).
3649 See external documentation.
3651 bindTexture(Target, Texture) -> ok
3653 Types:
3655 Target = enum()
3657 Texture = integer()
3658 Bind a named texture to a texturing target
3660 gl:bindTexture lets you create or use a named texture. Calling
3662 gl:bindTexture with Target set to ?GL_TEXTURE_1D, ?GL_TEX‐
3663 TURE_2D, ?GL_TEXTURE_3D , or ?GL_TEXTURE_1D_ARRAY, ?GL_TEX‐
3664 TURE_2D_ARRAY, ?GL_TEXTURE_RECTANGLE , ?GL_TEXTURE_CUBE_MAP,
3665 ?GL_TEXTURE_2D_MULTISAMPLE or ?GL_TEXTURE_2D_MULTISAMPLE_ARRAY
3666 and Texture set to the name of the new texture binds the texture
3667 name to the target. When a texture is bound to a target, the
3668 previous binding for that target is automatically broken.
3669 See external documentation.
3671 prioritizeTextures(Textures, Priorities) -> ok
3673 Types:
3675 Textures = [integer()]
3677 Priorities = [clamp()]
3678 Set texture residence priority
3680 gl:prioritizeTextures assigns the N texture priorities given in
3682 Priorities to the N textures named in Textures .
3683 See external documentation.
3685 areTexturesResident(Textures) -> {0 | 1, Residences::[0 | 1]}
3687 Types:
3689 Textures = [integer()]
3691 Determine if textures are loaded in texture memory
3693 GL establishes a working set of textures that are resident in
3695 texture memory. These textures can be bound to a texture target
3696 much more efficiently than textures that are not resident.
3697 See external documentation.
3699 isTexture(Texture) -> 0 | 1
3701 Types:
3703 Texture = integer()
3705 Determine if a name corresponds to a texture
3707 gl:isTexture returns ?GL_TRUE if Texture is currently the name
3709 of a texture. If Texture is zero, or is a non-zero value that is
3710 not currently the name of a texture, or if an error occurs,
3711 gl:isTexture returns ?GL_FALSE.
3712 See external documentation.
3714 texSubImage1D(Target, Level, Xoffset, Width, Format, Type, Pixels) ->
3716 ok
3717 Types:
3719 Target = enum()
3721 Level = integer()
3722 Xoffset = integer()
3723 Width = integer()
3724 Format = enum()
3725 Type = enum()
3726 Pixels = offset() | mem()
3727 glTexSubImage
3729 See external documentation.
3731 texSubImage2D(Target, Level, Xoffset, Yoffset, Width, Height, Format,
3733 Type, Pixels) -> ok
3734 Types:
3736 Target = enum()
3738 Level = integer()
3739 Xoffset = integer()
3740 Yoffset = integer()
3741 Width = integer()
3742 Height = integer()
3743 Format = enum()
3744 Type = enum()
3745 Pixels = offset() | mem()
3746 glTexSubImage
3748 See external documentation.
3750 copyTexImage1D(Target, Level, Internalformat, X, Y, Width, Border) ->
3752 ok
3753 Types:
3755 Target = enum()
3757 Level = integer()
3758 Internalformat = enum()
3759 X = integer()
3760 Y = integer()
3761 Width = integer()
3762 Border = integer()
3763 Copy pixels into a 1D texture image
3765 gl:copyTexImage1D defines a one-dimensional texture image with
3767 pixels from the current ?GL_READ_BUFFER.
3768 See external documentation.
3770 copyTexImage2D(Target, Level, Internalformat, X, Y, Width, Height, Bor‐
3772 der) -> ok
3773 Types:
3775 Target = enum()
3777 Level = integer()
3778 Internalformat = enum()
3779 X = integer()
3780 Y = integer()
3781 Width = integer()
3782 Height = integer()
3783 Border = integer()
3784 Copy pixels into a 2D texture image
3786 gl:copyTexImage2D defines a two-dimensional texture image, or
3788 cube-map texture image with pixels from the current
3789 ?GL_READ_BUFFER.
3790 See external documentation.
3792 copyTexSubImage1D(Target, Level, Xoffset, X, Y, Width) -> ok
3794 Types:
3796 Target = enum()
3798 Level = integer()
3799 Xoffset = integer()
3800 X = integer()
3801 Y = integer()
3802 Width = integer()
3803 Copy a one-dimensional texture subimage
3805 gl:copyTexSubImage1D replaces a portion of a one-dimensional
3807 texture image with pixels from the current ?GL_READ_BUFFER
3808 (rather than from main memory, as is the case for gl:texSubIm‐
3809 age1D/7 ).
3810 See external documentation.
3812 copyTexSubImage2D(Target, Level, Xoffset, Yoffset, X, Y, Width, Height)
3814 -> ok
3815 Types:
3817 Target = enum()
3819 Level = integer()
3820 Xoffset = integer()
3821 Yoffset = integer()
3822 X = integer()
3823 Y = integer()
3824 Width = integer()
3825 Height = integer()
3826 Copy a two-dimensional texture subimage
3828 gl:copyTexSubImage2D replaces a rectangular portion of a two-
3830 dimensional texture image or cube-map texture image with pixels
3831 from the current ?GL_READ_BUFFER (rather than from main memory,
3832 as is the case for gl:texSubImage1D/7 ).
3833 See external documentation.
3835 map1d(Target, U1, U2, Stride, Order, Points) -> ok
3837 Types:
3839 Target = enum()
3841 U1 = float()
3842 U2 = float()
3843 Stride = integer()
3844 Order = integer()
3845 Points = binary()
3846 glMap
3848 See external documentation.
3850 map1f(Target, U1, U2, Stride, Order, Points) -> ok
3852 Types:
3854 Target = enum()
3856 U1 = float()
3857 U2 = float()
3858 Stride = integer()
3859 Order = integer()
3860 Points = binary()
3861 glMap
3863 See external documentation.
3865 map2d(Target, U1, U2, Ustride, Uorder, V1, V2, Vstride, Vorder, Points)
3867 -> ok
3868 Types:
3870 Target = enum()
3872 U1 = float()
3873 U2 = float()
3874 Ustride = integer()
3875 Uorder = integer()
3876 V1 = float()
3877 V2 = float()
3878 Vstride = integer()
3879 Vorder = integer()
3880 Points = binary()
3881 glMap
3883 See external documentation.
3885 map2f(Target, U1, U2, Ustride, Uorder, V1, V2, Vstride, Vorder, Points)
3887 -> ok
3888 Types:
3890 Target = enum()
3892 U1 = float()
3893 U2 = float()
3894 Ustride = integer()
3895 Uorder = integer()
3896 V1 = float()
3897 V2 = float()
3898 Vstride = integer()
3899 Vorder = integer()
3900 Points = binary()
3901 glMap
3903 See external documentation.
3905 getMapdv(Target, Query, V) -> ok
3907 Types:
3909 Target = enum()
3911 Query = enum()
3912 V = mem()
3913 Return evaluator parameters
3915 gl:map1d/6 and gl:map1d/6 define evaluators. gl:getMap returns
3917 evaluator parameters. Target chooses a map, Query selects a spe‐
3918 cific parameter, and V points to storage where the values will
3919 be returned.
3920 See external documentation.
3922 getMapfv(Target, Query, V) -> ok
3924 Types:
3926 Target = enum()
3928 Query = enum()
3929 V = mem()
3930 See getMapdv/3
3932 getMapiv(Target, Query, V) -> ok
3934 Types:
3936 Target = enum()
3938 Query = enum()
3939 V = mem()
3940 See getMapdv/3
3942 evalCoord1d(U) -> ok
3944 Types:
3946 U = float()
3948 Evaluate enabled one- and two-dimensional maps
3950 gl:evalCoord1 evaluates enabled one-dimensional maps at argument
3952 U . gl:evalCoord2 does the same for two-dimensional maps using
3953 two domain values, U and V . To define a map, call gl:map1d/6
3954 and gl:map1d/6 ; to enable and disable it, call gl:enable/1 and
3955 gl:enable/1 .
3956 See external documentation.
3958 evalCoord1f(U) -> ok
3960 Types:
3962 U = float()
3964 See evalCoord1d/1
3966 evalCoord1dv(U) -> ok
3968 Types:
3970 U = {U::float()}
3972 Equivalent to evalCoord1d(U).
3974 evalCoord1fv(U) -> ok
3976 Types:
3978 U = {U::float()}
3980 Equivalent to evalCoord1f(U).
3982 evalCoord2d(U, V) -> ok
3984 Types:
3986 U = float()
3988 V = float()
3989 See evalCoord1d/1
3991 evalCoord2f(U, V) -> ok
3993 Types:
3995 U = float()
3997 V = float()
3998 See evalCoord1d/1
4000 evalCoord2dv(U) -> ok
4002 Types:
4004 U = {U::float(), V::float()}
4006 Equivalent to evalCoord2d(U, V).
4008 evalCoord2fv(U) -> ok
4010 Types:
4012 U = {U::float(), V::float()}
4014 Equivalent to evalCoord2f(U, V).
4016 mapGrid1d(Un, U1, U2) -> ok
4018 Types:
4020 Un = integer()
4022 U1 = float()
4023 U2 = float()
4024 Define a one- or two-dimensional mesh
4026 gl:mapGrid and gl:evalMesh1/3 are used together to efficiently
4028 generate and evaluate a series of evenly-spaced map domain val‐
4029 ues. gl:evalMesh1/3 steps through the integer domain of a one-
4030 or two-dimensional grid, whose range is the domain of the evalu‐
4031 ation maps specified by gl:map1d/6 and gl:map1d/6 .
4032 See external documentation.
4034 mapGrid1f(Un, U1, U2) -> ok
4036 Types:
4038 Un = integer()
4040 U1 = float()
4041 U2 = float()
4042 See mapGrid1d/3
4044 mapGrid2d(Un, U1, U2, Vn, V1, V2) -> ok
4046 Types:
4048 Un = integer()
4050 U1 = float()
4051 U2 = float()
4052 Vn = integer()
4053 V1 = float()
4054 V2 = float()
4055 See mapGrid1d/3
4057 mapGrid2f(Un, U1, U2, Vn, V1, V2) -> ok
4059 Types:
4061 Un = integer()
4063 U1 = float()
4064 U2 = float()
4065 Vn = integer()
4066 V1 = float()
4067 V2 = float()
4068 See mapGrid1d/3
4070 evalPoint1(I) -> ok
4072 Types:
4074 I = integer()
4076 Generate and evaluate a single point in a mesh
4078 gl:mapGrid1d/3 and gl:evalMesh1/3 are used in tandem to effi‐
4080 ciently generate and evaluate a series of evenly spaced map
4081 domain values. gl:evalPoint can be used to evaluate a single
4082 grid point in the same gridspace that is traversed by
4083 gl:evalMesh1/3 . Calling gl:evalPoint1 is equivalent to calling
4084 glEvalCoord1( i.Δ u+u 1 ); where Δ u=(u 2-u 1)/n
4085 See external documentation.
4087 evalPoint2(I, J) -> ok
4089 Types:
4091 I = integer()
4093 J = integer()
4094 See evalPoint1/1
4096 evalMesh1(Mode, I1, I2) -> ok
4098 Types:
4100 Mode = enum()
4102 I1 = integer()
4103 I2 = integer()
4104 Compute a one- or two-dimensional grid of points or lines
4106 gl:mapGrid1d/3 and gl:evalMesh are used in tandem to efficiently
4108 generate and evaluate a series of evenly-spaced map domain val‐
4109 ues. gl:evalMesh steps through the integer domain of a one- or
4110 two-dimensional grid, whose range is the domain of the evalua‐
4111 tion maps specified by gl:map1d/6 and gl:map1d/6 . Mode deter‐
4112 mines whether the resulting vertices are connected as points,
4113 lines, or filled polygons.
4114 See external documentation.
4116 evalMesh2(Mode, I1, I2, J1, J2) -> ok
4118 Types:
4120 Mode = enum()
4122 I1 = integer()
4123 I2 = integer()
4124 J1 = integer()
4125 J2 = integer()
4126 See evalMesh1/3
4128 fogf(Pname, Param) -> ok
4130 Types:
4132 Pname = enum()
4134 Param = float()
4135 Specify fog parameters
4137 Fog is initially disabled. While enabled, fog affects rasterized
4139 geometry, bitmaps, and pixel blocks, but not buffer clear opera‐
4140 tions. To enable and disable fog, call gl:enable/1 and
4141 gl:enable/1 with argument ?GL_FOG.
4142 See external documentation.
4144 fogi(Pname, Param) -> ok
4146 Types:
4148 Pname = enum()
4150 Param = integer()
4151 See fogf/2
4153 fogfv(Pname, Params) -> ok
4155 Types:
4157 Pname = enum()
4159 Params = tuple()
4160 See fogf/2
4162 fogiv(Pname, Params) -> ok
4164 Types:
4166 Pname = enum()
4168 Params = tuple()
4169 See fogf/2
4171 feedbackBuffer(Size, Type, Buffer) -> ok
4173 Types:
4175 Size = integer()
4177 Type = enum()
4178 Buffer = mem()
4179 Controls feedback mode
4181 The gl:feedbackBuffer function controls feedback. Feedback, like
4183 selection, is a GL mode. The mode is selected by calling gl:ren‐
4184 derMode/1 with ?GL_FEEDBACK. When the GL is in feedback mode, no
4185 pixels are produced by rasterization. Instead, information about
4186 primitives that would have been rasterized is fed back to the
4187 application using the GL.
4188 See external documentation.
4190 passThrough(Token) -> ok
4192 Types:
4194 Token = float()
4196 Place a marker in the feedback buffer
4198 See external documentation.
4200 selectBuffer(Size, Buffer) -> ok
4202 Types:
4204 Size = integer()
4206 Buffer = mem()
4207 Establish a buffer for selection mode values
4209 gl:selectBuffer has two arguments: Buffer is a pointer to an
4211 array of unsigned integers, and Size indicates the size of the
4212 array. Buffer returns values from the name stack (see gl:init‐
4213 Names/0 , gl:loadName/1 , gl:pushName/1 ) when the rendering
4214 mode is ?GL_SELECT (see gl:renderMode/1 ). gl:selectBuffer must
4215 be issued before selection mode is enabled, and it must not be
4216 issued while the rendering mode is ?GL_SELECT.
4217 See external documentation.
4219 initNames() -> ok
4221 Initialize the name stack
4223 The name stack is used during selection mode to allow sets of
4225 rendering commands to be uniquely identified. It consists of an
4226 ordered set of unsigned integers. gl:initNames causes the name
4227 stack to be initialized to its default empty state.
4228 See external documentation.
4230 loadName(Name) -> ok
4232 Types:
4234 Name = integer()
4236 Load a name onto the name stack
4238 The name stack is used during selection mode to allow sets of
4240 rendering commands to be uniquely identified. It consists of an
4241 ordered set of unsigned integers and is initially empty.
4242 See external documentation.
4244 pushName(Name) -> ok
4246 Types:
4248 Name = integer()
4250 Push and pop the name stack
4252 The name stack is used during selection mode to allow sets of
4254 rendering commands to be uniquely identified. It consists of an
4255 ordered set of unsigned integers and is initially empty.
4256 See external documentation.
4258 popName() -> ok
4260 See pushName/1
4262 blendColor(Red, Green, Blue, Alpha) -> ok
4264 Types:
4266 Red = clamp()
4268 Green = clamp()
4269 Blue = clamp()
4270 Alpha = clamp()
4271 Set the blend color
4273 The ?GL_BLEND_COLOR may be used to calculate the source and des‐
4275 tination blending factors. The color components are clamped to
4276 the range [0 1] before being stored. See gl:blendFunc/2 for a
4277 complete description of the blending operations. Initially the
4278 ?GL_BLEND_COLOR is set to (0, 0, 0, 0).
4279 See external documentation.
4281 blendEquation(Mode) -> ok
4283 Types:
4285 Mode = enum()
4287 Specify the equation used for both the RGB blend equation and
4289 the Alpha blend equation
4290 The blend equations determine how a new pixel (the ''source''
4292 color) is combined with a pixel already in the framebuffer (the
4293 ''destination'' color). This function sets both the RGB blend
4294 equation and the alpha blend equation to a single equation.
4295 gl:blendEquationi specifies the blend equation for a single draw
4296 buffer whereas gl:blendEquation sets the blend equation for all
4297 draw buffers.
4298 See external documentation.
4300 drawRangeElements(Mode, Start, End, Count, Type, Indices) -> ok
4302 Types:
4304 Mode = enum()
4306 Start = integer()
4307 End = integer()
4308 Count = integer()
4309 Type = enum()
4310 Indices = offset() | mem()
4311 Render primitives from array data
4313 gl:drawRangeElements is a restricted form of gl:drawElements/4 .
4315 Mode , Start , End , and Count match the corresponding arguments
4316 to gl:drawElements/4 , with the additional constraint that all
4317 values in the arrays Count must lie between Start and End ,
4318 inclusive.
4319 See external documentation.
4321 texImage3D(Target, Level, InternalFormat, Width, Height, Depth, Border,
4323 Format, Type, Pixels) -> ok
4324 Types:
4326 Target = enum()
4328 Level = integer()
4329 InternalFormat = integer()
4330 Width = integer()
4331 Height = integer()
4332 Depth = integer()
4333 Border = integer()
4334 Format = enum()
4335 Type = enum()
4336 Pixels = offset() | mem()
4337 Specify a three-dimensional texture image
4339 Texturing maps a portion of a specified texture image onto each
4341 graphical primitive for which texturing is enabled. To enable
4342 and disable three-dimensional texturing, call gl:enable/1 and
4343 gl:enable/1 with argument ?GL_TEXTURE_3D.
4344 See external documentation.
4346 texSubImage3D(Target, Level, Xoffset, Yoffset, Zoffset, Width, Height,
4348 Depth, Format, Type, Pixels) -> ok
4349 Types:
4351 Target = enum()
4353 Level = integer()
4354 Xoffset = integer()
4355 Yoffset = integer()
4356 Zoffset = integer()
4357 Width = integer()
4358 Height = integer()
4359 Depth = integer()
4360 Format = enum()
4361 Type = enum()
4362 Pixels = offset() | mem()
4363 glTexSubImage
4365 See external documentation.
4367 copyTexSubImage3D(Target, Level, Xoffset, Yoffset, Zoffset, X, Y,
4369 Width, Height) -> ok
4370 Types:
4372 Target = enum()
4374 Level = integer()
4375 Xoffset = integer()
4376 Yoffset = integer()
4377 Zoffset = integer()
4378 X = integer()
4379 Y = integer()
4380 Width = integer()
4381 Height = integer()
4382 Copy a three-dimensional texture subimage
4384 gl:copyTexSubImage3D replaces a rectangular portion of a three-
4386 dimensional texture image with pixels from the current
4387 ?GL_READ_BUFFER (rather than from main memory, as is the case
4388 for gl:texSubImage1D/7 ).
4389 See external documentation.
4391 colorTable(Target, Internalformat, Width, Format, Type, Table) -> ok
4393 Types:
4395 Target = enum()
4397 Internalformat = enum()
4398 Width = integer()
4399 Format = enum()
4400 Type = enum()
4401 Table = offset() | mem()
4402 Define a color lookup table
4404 gl:colorTable may be used in two ways: to test the actual size
4406 and color resolution of a lookup table given a particular set of
4407 parameters, or to load the contents of a color lookup table. Use
4408 the targets ?GL_PROXY_* for the first case and the other targets
4409 for the second case.
4410 See external documentation.
4412 colorTableParameterfv(Target, Pname, Params) -> ok
4414 Types:
4416 Target = enum()
4418 Pname = enum()
4419 Params = {float(), float(), float(), float()}
4420 Set color lookup table parameters
4422 gl:colorTableParameter is used to specify the scale factors and
4424 bias terms applied to color components when they are loaded into
4425 a color table. Target indicates which color table the scale and
4426 bias terms apply to; it must be set to ?GL_COLOR_TABLE,
4427 ?GL_POST_CONVOLUTION_COLOR_TABLE , or
4428 ?GL_POST_COLOR_MATRIX_COLOR_TABLE.
4429 See external documentation.
4431 colorTableParameteriv(Target, Pname, Params) -> ok
4433 Types:
4435 Target = enum()
4437 Pname = enum()
4438 Params = {integer(), integer(), integer(), integer()}
4439 See colorTableParameterfv/3
4441 copyColorTable(Target, Internalformat, X, Y, Width) -> ok
4443 Types:
4445 Target = enum()
4447 Internalformat = enum()
4448 X = integer()
4449 Y = integer()
4450 Width = integer()
4451 Copy pixels into a color table
4453 gl:copyColorTable loads a color table with pixels from the cur‐
4455 rent ?GL_READ_BUFFER (rather than from main memory, as is the
4456 case for gl:colorTable/6 ).
4457 See external documentation.
4459 getColorTable(Target, Format, Type, Table) -> ok
4461 Types:
4463 Target = enum()
4465 Format = enum()
4466 Type = enum()
4467 Table = mem()
4468 Retrieve contents of a color lookup table
4470 gl:getColorTable returns in Table the contents of the color ta‐
4472 ble specified by Target . No pixel transfer operations are per‐
4473 formed, but pixel storage modes that are applicable to gl:read‐
4474 Pixels/7 are performed.
4475 See external documentation.
4477 getColorTableParameterfv(Target, Pname) -> {float(), float(), float(),
4479 float()}
4480 Types:
4482 Target = enum()
4484 Pname = enum()
4485 Get color lookup table parameters
4487 Returns parameters specific to color table Target .
4489 See external documentation.
4491 getColorTableParameteriv(Target, Pname) -> {integer(), integer(), inte‐
4493 ger(), integer()}
4494 Types:
4496 Target = enum()
4498 Pname = enum()
4499 See getColorTableParameterfv/2
4501 colorSubTable(Target, Start, Count, Format, Type, Data) -> ok
4503 Types:
4505 Target = enum()
4507 Start = integer()
4508 Count = integer()
4509 Format = enum()
4510 Type = enum()
4511 Data = offset() | mem()
4512 Respecify a portion of a color table
4514 gl:colorSubTable is used to respecify a contiguous portion of a
4516 color table previously defined using gl:colorTable/6 . The pix‐
4517 els referenced by Data replace the portion of the existing table
4518 from indices Start to start+count-1, inclusive. This region may
4519 not include any entries outside the range of the color table as
4520 it was originally specified. It is not an error to specify a
4521 subtexture with width of 0, but such a specification has no
4522 effect.
4523 See external documentation.
4525 copyColorSubTable(Target, Start, X, Y, Width) -> ok
4527 Types:
4529 Target = enum()
4531 Start = integer()
4532 X = integer()
4533 Y = integer()
4534 Width = integer()
4535 Respecify a portion of a color table
4537 gl:copyColorSubTable is used to respecify a contiguous portion
4539 of a color table previously defined using gl:colorTable/6 . The
4540 pixels copied from the framebuffer replace the portion of the
4541 existing table from indices Start to start+x-1, inclusive. This
4542 region may not include any entries outside the range of the
4543 color table, as was originally specified. It is not an error to
4544 specify a subtexture with width of 0, but such a specification
4545 has no effect.
4546 See external documentation.
4548 convolutionFilter1D(Target, Internalformat, Width, Format, Type, Image)
4550 -> ok
4551 Types:
4553 Target = enum()
4555 Internalformat = enum()
4556 Width = integer()
4557 Format = enum()
4558 Type = enum()
4559 Image = offset() | mem()
4560 Define a one-dimensional convolution filter
4562 gl:convolutionFilter1D builds a one-dimensional convolution fil‐
4564 ter kernel from an array of pixels.
4565 See external documentation.
4567 convolutionFilter2D(Target, Internalformat, Width, Height, Format,
4569 Type, Image) -> ok
4570 Types:
4572 Target = enum()
4574 Internalformat = enum()
4575 Width = integer()
4576 Height = integer()
4577 Format = enum()
4578 Type = enum()
4579 Image = offset() | mem()
4580 Define a two-dimensional convolution filter
4582 gl:convolutionFilter2D builds a two-dimensional convolution fil‐
4584 ter kernel from an array of pixels.
4585 See external documentation.
4587 convolutionParameterf(Target, Pname, Params) -> ok
4589 Types:
4591 Target = enum()
4593 Pname = enum()
4594 Params = tuple()
4595 Set convolution parameters
4597 gl:convolutionParameter sets the value of a convolution parame‐
4599 ter.
4600 See external documentation.
4602 convolutionParameterfv(Target::enum(), Pname::enum(), Params) -> ok
4604 Types:
4606 Params = {Params::tuple()}
4608 Equivalent to convolutionParameterf(Target, Pname, Params).
4610 convolutionParameteri(Target, Pname, Params) -> ok
4612 Types:
4614 Target = enum()
4616 Pname = enum()
4617 Params = tuple()
4618 See convolutionParameterf/3
4620 convolutionParameteriv(Target::enum(), Pname::enum(), Params) -> ok
4622 Types:
4624 Params = {Params::tuple()}
4626 Equivalent to convolutionParameteri(Target, Pname, Params).
4628 copyConvolutionFilter1D(Target, Internalformat, X, Y, Width) -> ok
4630 Types:
4632 Target = enum()
4634 Internalformat = enum()
4635 X = integer()
4636 Y = integer()
4637 Width = integer()
4638 Copy pixels into a one-dimensional convolution filter
4640 gl:copyConvolutionFilter1D defines a one-dimensional convolution
4642 filter kernel with pixels from the current ?GL_READ_BUFFER
4643 (rather than from main memory, as is the case for gl:convolu‐
4644 tionFilter1D/6 ).
4645 See external documentation.
4647 copyConvolutionFilter2D(Target, Internalformat, X, Y, Width, Height) ->
4649 ok
4650 Types:
4652 Target = enum()
4654 Internalformat = enum()
4655 X = integer()
4656 Y = integer()
4657 Width = integer()
4658 Height = integer()
4659 Copy pixels into a two-dimensional convolution filter
4661 gl:copyConvolutionFilter2D defines a two-dimensional convolution
4663 filter kernel with pixels from the current ?GL_READ_BUFFER
4664 (rather than from main memory, as is the case for gl:convolu‐
4665 tionFilter2D/7 ).
4666 See external documentation.
4668 getConvolutionFilter(Target, Format, Type, Image) -> ok
4670 Types:
4672 Target = enum()
4674 Format = enum()
4675 Type = enum()
4676 Image = mem()
4677 Get current 1D or 2D convolution filter kernel
4679 gl:getConvolutionFilter returns the current 1D or 2D convolution
4681 filter kernel as an image. The one- or two-dimensional image is
4682 placed in Image according to the specifications in Format and
4683 Type . No pixel transfer operations are performed on this image,
4684 but the relevant pixel storage modes are applied.
4685 See external documentation.
4687 getConvolutionParameterfv(Target, Pname) -> {float(), float(), float(),
4689 float()}
4690 Types:
4692 Target = enum()
4694 Pname = enum()
4695 Get convolution parameters
4697 gl:getConvolutionParameter retrieves convolution parameters.
4699 Target determines which convolution filter is queried. Pname
4700 determines which parameter is returned:
4701 See external documentation.
4703 getConvolutionParameteriv(Target, Pname) -> {integer(), integer(),
4705 integer(), integer()}
4706 Types:
4708 Target = enum()
4710 Pname = enum()
4711 See getConvolutionParameterfv/2
4713 separableFilter2D(Target, Internalformat, Width, Height, Format, Type,
4715 Row, Column) -> ok
4716 Types:
4718 Target = enum()
4720 Internalformat = enum()
4721 Width = integer()
4722 Height = integer()
4723 Format = enum()
4724 Type = enum()
4725 Row = offset() | mem()
4726 Column = offset() | mem()
4727 Define a separable two-dimensional convolution filter
4729 gl:separableFilter2D builds a two-dimensional separable convolu‐
4731 tion filter kernel from two arrays of pixels.
4732 See external documentation.
4734 getHistogram(Target, Reset, Format, Type, Values) -> ok
4736 Types:
4738 Target = enum()
4740 Reset = 0 | 1
4741 Format = enum()
4742 Type = enum()
4743 Values = mem()
4744 Get histogram table
4746 gl:getHistogram returns the current histogram table as a one-
4748 dimensional image with the same width as the histogram. No pixel
4749 transfer operations are performed on this image, but pixel stor‐
4750 age modes that are applicable to 1D images are honored.
4751 See external documentation.
4753 getHistogramParameterfv(Target, Pname) -> {float()}
4755 Types:
4757 Target = enum()
4759 Pname = enum()
4760 Get histogram parameters
4762 gl:getHistogramParameter is used to query parameter values for
4764 the current histogram or for a proxy. The histogram state infor‐
4765 mation may be queried by calling gl:getHistogramParameter with a
4766 Target of ?GL_HISTOGRAM (to obtain information for the current
4767 histogram table) or ?GL_PROXY_HISTOGRAM (to obtain information
4768 from the most recent proxy request) and one of the following
4769 values for the Pname argument:
4770 See external documentation.
4772 getHistogramParameteriv(Target, Pname) -> {integer()}
4774 Types:
4776 Target = enum()
4778 Pname = enum()
4779 See getHistogramParameterfv/2
4781 getMinmax(Target, Reset, Format, Types, Values) -> ok
4783 Types:
4785 Target = enum()
4787 Reset = 0 | 1
4788 Format = enum()
4789 Types = enum()
4790 Values = mem()
4791 Get minimum and maximum pixel values
4793 gl:getMinmax returns the accumulated minimum and maximum pixel
4795 values (computed on a per-component basis) in a one-dimensional
4796 image of width 2. The first set of return values are the minima,
4797 and the second set of return values are the maxima. The format
4798 of the return values is determined by Format , and their type is
4799 determined by Types .
4800 See external documentation.
4802 getMinmaxParameterfv(Target, Pname) -> {float()}
4804 Types:
4806 Target = enum()
4808 Pname = enum()
4809 Get minmax parameters
4811 gl:getMinmaxParameter retrieves parameters for the current min‐
4813 max table by setting Pname to one of the following values:
4814 See external documentation.
4816 getMinmaxParameteriv(Target, Pname) -> {integer()}
4818 Types:
4820 Target = enum()
4822 Pname = enum()
4823 See getMinmaxParameterfv/2
4825 histogram(Target, Width, Internalformat, Sink) -> ok
4827 Types:
4829 Target = enum()
4831 Width = integer()
4832 Internalformat = enum()
4833 Sink = 0 | 1
4834 Define histogram table
4836 When ?GL_HISTOGRAM is enabled, RGBA color components are con‐
4838 verted to histogram table indices by clamping to the range
4839 [0,1], multiplying by the width of the histogram table, and
4840 rounding to the nearest integer. The table entries selected by
4841 the RGBA indices are then incremented. (If the internal format
4842 of the histogram table includes luminance, then the index
4843 derived from the R color component determines the luminance ta‐
4844 ble entry to be incremented.) If a histogram table entry is
4845 incremented beyond its maximum value, then its value becomes
4846 undefined. (This is not an error.)
4847 See external documentation.
4849 minmax(Target, Internalformat, Sink) -> ok
4851 Types:
4853 Target = enum()
4855 Internalformat = enum()
4856 Sink = 0 | 1
4857 Define minmax table
4859 When ?GL_MINMAX is enabled, the RGBA components of incoming pix‐
4861 els are compared to the minimum and maximum values for each com‐
4862 ponent, which are stored in the two-element minmax table. (The
4863 first element stores the minima, and the second element stores
4864 the maxima.) If a pixel component is greater than the corre‐
4865 sponding component in the maximum element, then the maximum ele‐
4866 ment is updated with the pixel component value. If a pixel com‐
4867 ponent is less than the corresponding component in the minimum
4868 element, then the minimum element is updated with the pixel com‐
4869 ponent value. (In both cases, if the internal format of the min‐
4870 max table includes luminance, then the R color component of
4871 incoming pixels is used for comparison.) The contents of the
4872 minmax table may be retrieved at a later time by calling gl:get‐
4873 Minmax/5 . The minmax operation is enabled or disabled by call‐
4874 ing gl:enable/1 or gl:enable/1 , respectively, with an argument
4875 of ?GL_MINMAX .
4876 See external documentation.
4878 resetHistogram(Target) -> ok
4880 Types:
4882 Target = enum()
4884 Reset histogram table entries to zero
4886 gl:resetHistogram resets all the elements of the current his‐
4888 togram table to zero.
4889 See external documentation.
4891 resetMinmax(Target) -> ok
4893 Types:
4895 Target = enum()
4897 Reset minmax table entries to initial values
4899 gl:resetMinmax resets the elements of the current minmax table
4901 to their initial values: the maximum element receives the mini‐
4902 mum possible component values, and the minimum element receives
4903 the maximum possible component values.
4904 See external documentation.
4906 activeTexture(Texture) -> ok
4908 Types:
4910 Texture = enum()
4912 Select active texture unit
4914 gl:activeTexture selects which texture unit subsequent texture
4916 state calls will affect. The number of texture units an imple‐
4917 mentation supports is implementation dependent, but must be at
4918 least 80.
4919 See external documentation.
4921 sampleCoverage(Value, Invert) -> ok
4923 Types:
4925 Value = clamp()
4927 Invert = 0 | 1
4928 Specify multisample coverage parameters
4930 Multisampling samples a pixel multiple times at various imple‐
4932 mentation-dependent subpixel locations to generate antialiasing
4933 effects. Multisampling transparently antialiases points, lines,
4934 polygons, and images if it is enabled.
4935 See external documentation.
4937 compressedTexImage3D(Target, Level, Internalformat, Width, Height,
4939 Depth, Border, ImageSize, Data) -> ok
4940 Types:
4942 Target = enum()
4944 Level = integer()
4945 Internalformat = enum()
4946 Width = integer()
4947 Height = integer()
4948 Depth = integer()
4949 Border = integer()
4950 ImageSize = integer()
4951 Data = offset() | mem()
4952 Specify a three-dimensional texture image in a compressed format
4954 Texturing allows elements of an image array to be read by
4956 shaders.
4957 See external documentation.
4959 compressedTexImage2D(Target, Level, Internalformat, Width, Height, Bor‐
4961 der, ImageSize, Data) -> ok
4962 Types:
4964 Target = enum()
4966 Level = integer()
4967 Internalformat = enum()
4968 Width = integer()
4969 Height = integer()
4970 Border = integer()
4971 ImageSize = integer()
4972 Data = offset() | mem()
4973 Specify a two-dimensional texture image in a compressed format
4975 Texturing allows elements of an image array to be read by
4977 shaders.
4978 See external documentation.
4980 compressedTexImage1D(Target, Level, Internalformat, Width, Border, Ima‐
4982 geSize, Data) -> ok
4983 Types:
4985 Target = enum()
4987 Level = integer()
4988 Internalformat = enum()
4989 Width = integer()
4990 Border = integer()
4991 ImageSize = integer()
4992 Data = offset() | mem()
4993 Specify a one-dimensional texture image in a compressed format
4995 Texturing allows elements of an image array to be read by
4997 shaders.
4998 See external documentation.
5000 compressedTexSubImage3D(Target, Level, Xoffset, Yoffset, Zoffset,
5002 Width, Height, Depth, Format, ImageSize, Data) -> ok
5003 Types:
5005 Target = enum()
5007 Level = integer()
5008 Xoffset = integer()
5009 Yoffset = integer()
5010 Zoffset = integer()
5011 Width = integer()
5012 Height = integer()
5013 Depth = integer()
5014 Format = enum()
5015 ImageSize = integer()
5016 Data = offset() | mem()
5017 Specify a three-dimensional texture subimage in a compressed
5019 format
5020 Texturing allows elements of an image array to be read by
5022 shaders.
5023 See external documentation.
5025 compressedTexSubImage2D(Target, Level, Xoffset, Yoffset, Width, Height,
5027 Format, ImageSize, Data) -> ok
5028 Types:
5030 Target = enum()
5032 Level = integer()
5033 Xoffset = integer()
5034 Yoffset = integer()
5035 Width = integer()
5036 Height = integer()
5037 Format = enum()
5038 ImageSize = integer()
5039 Data = offset() | mem()
5040 Specify a two-dimensional texture subimage in a compressed for‐
5042 mat
5043 Texturing allows elements of an image array to be read by
5045 shaders.
5046 See external documentation.
5048 compressedTexSubImage1D(Target, Level, Xoffset, Width, Format, Image‐
5050 Size, Data) -> ok
5051 Types:
5053 Target = enum()
5055 Level = integer()
5056 Xoffset = integer()
5057 Width = integer()
5058 Format = enum()
5059 ImageSize = integer()
5060 Data = offset() | mem()
5061 Specify a one-dimensional texture subimage in a compressed for‐
5063 mat
5064 Texturing allows elements of an image array to be read by
5066 shaders.
5067 See external documentation.
5069 getCompressedTexImage(Target, Lod, Img) -> ok
5071 Types:
5073 Target = enum()
5075 Lod = integer()
5076 Img = mem()
5077 Return a compressed texture image
5079 gl:getCompressedTexImage returns the compressed texture image
5081 associated with Target and Lod into Img . Img should be an array
5082 of ?GL_TEXTURE_COMPRESSED_IMAGE_SIZE bytes. Target specifies
5083 whether the desired texture image was one specified by gl:texIm‐
5084 age1D/8 (?GL_TEXTURE_1D), gl:texImage2D/9 (?GL_TEXTURE_2D or any
5085 of ?GL_TEXTURE_CUBE_MAP_* ), or gl:texImage3D/10 (?GL_TEX‐
5086 TURE_3D). Lod specifies the level-of-detail number of the
5087 desired image.
5088 See external documentation.
5090 clientActiveTexture(Texture) -> ok
5092 Types:
5094 Texture = enum()
5096 Select active texture unit
5098 gl:clientActiveTexture selects the vertex array client state
5100 parameters to be modified by gl:texCoordPointer/4 , and enabled
5101 or disabled with gl:enableClientState/1 or gl:enable‐
5102 ClientState/1 , respectively, when called with a parameter of
5103 ?GL_TEXTURE_COORD_ARRAY .
5104 See external documentation.
5106 multiTexCoord1d(Target, S) -> ok
5108 Types:
5110 Target = enum()
5112 S = float()
5113 Set the current texture coordinates
5115 gl:multiTexCoord specifies texture coordinates in one, two,
5117 three, or four dimensions. gl:multiTexCoord1 sets the current
5118 texture coordinates to (s 0 0 1); a call to gl:multiTexCoord2
5119 sets them to (s t 0 1). Similarly, gl:multiTexCoord3 specifies
5120 the texture coordinates as (s t r 1), and gl:multiTexCoord4
5121 defines all four components explicitly as (s t r q).
5122 See external documentation.
5124 multiTexCoord1dv(Target::enum(), V) -> ok
5126 Types:
5128 V = {S::float()}
5130 Equivalent to multiTexCoord1d(Target, S).
5132 multiTexCoord1f(Target, S) -> ok
5134 Types:
5136 Target = enum()
5138 S = float()
5139 See multiTexCoord1d/2
5141 multiTexCoord1fv(Target::enum(), V) -> ok
5143 Types:
5145 V = {S::float()}
5147 Equivalent to multiTexCoord1f(Target, S).
5149 multiTexCoord1i(Target, S) -> ok
5151 Types:
5153 Target = enum()
5155 S = integer()
5156 See multiTexCoord1d/2
5158 multiTexCoord1iv(Target::enum(), V) -> ok
5160 Types:
5162 V = {S::integer()}
5164 Equivalent to multiTexCoord1i(Target, S).
5166 multiTexCoord1s(Target, S) -> ok
5168 Types:
5170 Target = enum()
5172 S = integer()
5173 See multiTexCoord1d/2
5175 multiTexCoord1sv(Target::enum(), V) -> ok
5177 Types:
5179 V = {S::integer()}
5181 Equivalent to multiTexCoord1s(Target, S).
5183 multiTexCoord2d(Target, S, T) -> ok
5185 Types:
5187 Target = enum()
5189 S = float()
5190 T = float()
5191 See multiTexCoord1d/2
5193 multiTexCoord2dv(Target::enum(), V) -> ok
5195 Types:
5197 V = {S::float(), T::float()}
5199 Equivalent to multiTexCoord2d(Target, S, T).
5201 multiTexCoord2f(Target, S, T) -> ok
5203 Types:
5205 Target = enum()
5207 S = float()
5208 T = float()
5209 See multiTexCoord1d/2
5211 multiTexCoord2fv(Target::enum(), V) -> ok
5213 Types:
5215 V = {S::float(), T::float()}
5217 Equivalent to multiTexCoord2f(Target, S, T).
5219 multiTexCoord2i(Target, S, T) -> ok
5221 Types:
5223 Target = enum()
5225 S = integer()
5226 T = integer()
5227 See multiTexCoord1d/2
5229 multiTexCoord2iv(Target::enum(), V) -> ok
5231 Types:
5233 V = {S::integer(), T::integer()}
5235 Equivalent to multiTexCoord2i(Target, S, T).
5237 multiTexCoord2s(Target, S, T) -> ok
5239 Types:
5241 Target = enum()
5243 S = integer()
5244 T = integer()
5245 See multiTexCoord1d/2
5247 multiTexCoord2sv(Target::enum(), V) -> ok
5249 Types:
5251 V = {S::integer(), T::integer()}
5253 Equivalent to multiTexCoord2s(Target, S, T).
5255 multiTexCoord3d(Target, S, T, R) -> ok
5257 Types:
5259 Target = enum()
5261 S = float()
5262 T = float()
5263 R = float()
5264 See multiTexCoord1d/2
5266 multiTexCoord3dv(Target::enum(), V) -> ok
5268 Types:
5270 V = {S::float(), T::float(), R::float()}
5272 Equivalent to multiTexCoord3d(Target, S, T, R).
5274 multiTexCoord3f(Target, S, T, R) -> ok
5276 Types:
5278 Target = enum()
5280 S = float()
5281 T = float()
5282 R = float()
5283 See multiTexCoord1d/2
5285 multiTexCoord3fv(Target::enum(), V) -> ok
5287 Types:
5289 V = {S::float(), T::float(), R::float()}
5291 Equivalent to multiTexCoord3f(Target, S, T, R).
5293 multiTexCoord3i(Target, S, T, R) -> ok
5295 Types:
5297 Target = enum()
5299 S = integer()
5300 T = integer()
5301 R = integer()
5302 See multiTexCoord1d/2
5304 multiTexCoord3iv(Target::enum(), V) -> ok
5306 Types:
5308 V = {S::integer(), T::integer(), R::integer()}
5310 Equivalent to multiTexCoord3i(Target, S, T, R).
5312 multiTexCoord3s(Target, S, T, R) -> ok
5314 Types:
5316 Target = enum()
5318 S = integer()
5319 T = integer()
5320 R = integer()
5321 See multiTexCoord1d/2
5323 multiTexCoord3sv(Target::enum(), V) -> ok
5325 Types:
5327 V = {S::integer(), T::integer(), R::integer()}
5329 Equivalent to multiTexCoord3s(Target, S, T, R).
5331 multiTexCoord4d(Target, S, T, R, Q) -> ok
5333 Types:
5335 Target = enum()
5337 S = float()
5338 T = float()
5339 R = float()
5340 Q = float()
5341 See multiTexCoord1d/2
5343 multiTexCoord4dv(Target::enum(), V) -> ok
5345 Types:
5347 V = {S::float(), T::float(), R::float(), Q::float()}
5349 Equivalent to multiTexCoord4d(Target, S, T, R, Q).
5351 multiTexCoord4f(Target, S, T, R, Q) -> ok
5353 Types:
5355 Target = enum()
5357 S = float()
5358 T = float()
5359 R = float()
5360 Q = float()
5361 See multiTexCoord1d/2
5363 multiTexCoord4fv(Target::enum(), V) -> ok
5365 Types:
5367 V = {S::float(), T::float(), R::float(), Q::float()}
5369 Equivalent to multiTexCoord4f(Target, S, T, R, Q).
5371 multiTexCoord4i(Target, S, T, R, Q) -> ok
5373 Types:
5375 Target = enum()
5377 S = integer()
5378 T = integer()
5379 R = integer()
5380 Q = integer()
5381 See multiTexCoord1d/2
5383 multiTexCoord4iv(Target::enum(), V) -> ok
5385 Types:
5387 V = {S::integer(), T::integer(), R::integer(), Q::integer()}
5389 Equivalent to multiTexCoord4i(Target, S, T, R, Q).
5391 multiTexCoord4s(Target, S, T, R, Q) -> ok
5393 Types:
5395 Target = enum()
5397 S = integer()
5398 T = integer()
5399 R = integer()
5400 Q = integer()
5401 See multiTexCoord1d/2
5403 multiTexCoord4sv(Target::enum(), V) -> ok
5405 Types:
5407 V = {S::integer(), T::integer(), R::integer(), Q::integer()}
5409 Equivalent to multiTexCoord4s(Target, S, T, R, Q).
5411 loadTransposeMatrixf(M) -> ok
5413 Types:
5415 M = matrix()
5417 Replace the current matrix with the specified row-major ordered
5419 matrix
5420 gl:loadTransposeMatrix replaces the current matrix with the one
5422 whose elements are specified by M . The current matrix is the
5423 projection matrix, modelview matrix, or texture matrix, depend‐
5424 ing on the current matrix mode (see gl:matrixMode/1 ).
5425 See external documentation.
5427 loadTransposeMatrixd(M) -> ok
5429 Types:
5431 M = matrix()
5433 See loadTransposeMatrixf/1
5435 multTransposeMatrixf(M) -> ok
5437 Types:
5439 M = matrix()
5441 Multiply the current matrix with the specified row-major ordered
5443 matrix
5444 gl:multTransposeMatrix multiplies the current matrix with the
5446 one specified using M , and replaces the current matrix with the
5447 product.
5448 See external documentation.
5450 multTransposeMatrixd(M) -> ok
5452 Types:
5454 M = matrix()
5456 See multTransposeMatrixf/1
5458 blendFuncSeparate(SfactorRGB, DfactorRGB, SfactorAlpha, DfactorAlpha)
5460 -> ok
5461 Types:
5463 SfactorRGB = enum()
5465 DfactorRGB = enum()
5466 SfactorAlpha = enum()
5467 DfactorAlpha = enum()
5468 Specify pixel arithmetic for RGB and alpha components separately
5470 Pixels can be drawn using a function that blends the incoming
5472 (source) RGBA values with the RGBA values that are already in
5473 the frame buffer (the destination values). Blending is initially
5474 disabled. Use gl:enable/1 and gl:enable/1 with argument
5475 ?GL_BLEND to enable and disable blending.
5476 See external documentation.
5478 multiDrawArrays(Mode, First, Count) -> ok
5480 Types:
5482 Mode = enum()
5484 First = [integer()] | mem()
5485 Count = [integer()] | mem()
5486 Render multiple sets of primitives from array data
5488 gl:multiDrawArrays specifies multiple sets of geometric primi‐
5490 tives with very few subroutine calls. Instead of calling a GL
5491 procedure to pass each individual vertex, normal, texture coor‐
5492 dinate, edge flag, or color, you can prespecify separate arrays
5493 of vertices, normals, and colors and use them to construct a
5494 sequence of primitives with a single call to gl:multiDrawArrays.
5495 See external documentation.
5497 pointParameterf(Pname, Param) -> ok
5499 Types:
5501 Pname = enum()
5503 Param = float()
5504 Specify point parameters
5506 The following values are accepted for Pname :
5508 See external documentation.
5510 pointParameterfv(Pname, Params) -> ok
5512 Types:
5514 Pname = enum()
5516 Params = tuple()
5517 See pointParameterf/2
5519 pointParameteri(Pname, Param) -> ok
5521 Types:
5523 Pname = enum()
5525 Param = integer()
5526 See pointParameterf/2
5528 pointParameteriv(Pname, Params) -> ok
5530 Types:
5532 Pname = enum()
5534 Params = tuple()
5535 See pointParameterf/2
5537 fogCoordf(Coord) -> ok
5539 Types:
5541 Coord = float()
5543 Set the current fog coordinates
5545 gl:fogCoord specifies the fog coordinate that is associated with
5547 each vertex and the current raster position. The value specified
5548 is interpolated and used in computing the fog color (see
5549 gl:fogf/2 ).
5550 See external documentation.
5552 fogCoordfv(Coord) -> ok
5554 Types:
5556 Coord = {Coord::float()}
5558 Equivalent to fogCoordf(Coord).
5560 fogCoordd(Coord) -> ok
5562 Types:
5564 Coord = float()
5566 See fogCoordf/1
5568 fogCoorddv(Coord) -> ok
5570 Types:
5572 Coord = {Coord::float()}
5574 Equivalent to fogCoordd(Coord).
5576 fogCoordPointer(Type, Stride, Pointer) -> ok
5578 Types:
5580 Type = enum()
5582 Stride = integer()
5583 Pointer = offset() | mem()
5584 Define an array of fog coordinates
5586 gl:fogCoordPointer specifies the location and data format of an
5588 array of fog coordinates to use when rendering. Type specifies
5589 the data type of each fog coordinate, and Stride specifies the
5590 byte stride from one fog coordinate to the next, allowing ver‐
5591 tices and attributes to be packed into a single array or stored
5592 in separate arrays.
5593 See external documentation.
5595 secondaryColor3b(Red, Green, Blue) -> ok
5597 Types:
5599 Red = integer()
5601 Green = integer()
5602 Blue = integer()
5603 Set the current secondary color
5605 The GL stores both a primary four-valued RGBA color and a sec‐
5607 ondary four-valued RGBA color (where alpha is always set to 0.0)
5608 that is associated with every vertex.
5609 See external documentation.
5611 secondaryColor3bv(V) -> ok
5613 Types:
5615 V = {Red::integer(), Green::integer(), Blue::integer()}
5617 Equivalent to secondaryColor3b(Red, Green, Blue).
5619 secondaryColor3d(Red, Green, Blue) -> ok
5621 Types:
5623 Red = float()
5625 Green = float()
5626 Blue = float()
5627 See secondaryColor3b/3
5629 secondaryColor3dv(V) -> ok
5631 Types:
5633 V = {Red::float(), Green::float(), Blue::float()}
5635 Equivalent to secondaryColor3d(Red, Green, Blue).
5637 secondaryColor3f(Red, Green, Blue) -> ok
5639 Types:
5641 Red = float()
5643 Green = float()
5644 Blue = float()
5645 See secondaryColor3b/3
5647 secondaryColor3fv(V) -> ok
5649 Types:
5651 V = {Red::float(), Green::float(), Blue::float()}
5653 Equivalent to secondaryColor3f(Red, Green, Blue).
5655 secondaryColor3i(Red, Green, Blue) -> ok
5657 Types:
5659 Red = integer()
5661 Green = integer()
5662 Blue = integer()
5663 See secondaryColor3b/3
5665 secondaryColor3iv(V) -> ok
5667 Types:
5669 V = {Red::integer(), Green::integer(), Blue::integer()}
5671 Equivalent to secondaryColor3i(Red, Green, Blue).
5673 secondaryColor3s(Red, Green, Blue) -> ok
5675 Types:
5677 Red = integer()
5679 Green = integer()
5680 Blue = integer()
5681 See secondaryColor3b/3
5683 secondaryColor3sv(V) -> ok
5685 Types:
5687 V = {Red::integer(), Green::integer(), Blue::integer()}
5689 Equivalent to secondaryColor3s(Red, Green, Blue).
5691 secondaryColor3ub(Red, Green, Blue) -> ok
5693 Types:
5695 Red = integer()
5697 Green = integer()
5698 Blue = integer()
5699 See secondaryColor3b/3
5701 secondaryColor3ubv(V) -> ok
5703 Types:
5705 V = {Red::integer(), Green::integer(), Blue::integer()}
5707 Equivalent to secondaryColor3ub(Red, Green, Blue).
5709 secondaryColor3ui(Red, Green, Blue) -> ok
5711 Types:
5713 Red = integer()
5715 Green = integer()
5716 Blue = integer()
5717 See secondaryColor3b/3
5719 secondaryColor3uiv(V) -> ok
5721 Types:
5723 V = {Red::integer(), Green::integer(), Blue::integer()}
5725 Equivalent to secondaryColor3ui(Red, Green, Blue).
5727 secondaryColor3us(Red, Green, Blue) -> ok
5729 Types:
5731 Red = integer()
5733 Green = integer()
5734 Blue = integer()
5735 See secondaryColor3b/3
5737 secondaryColor3usv(V) -> ok
5739 Types:
5741 V = {Red::integer(), Green::integer(), Blue::integer()}
5743 Equivalent to secondaryColor3us(Red, Green, Blue).
5745 secondaryColorPointer(Size, Type, Stride, Pointer) -> ok
5747 Types:
5749 Size = integer()
5751 Type = enum()
5752 Stride = integer()
5753 Pointer = offset() | mem()
5754 Define an array of secondary colors
5756 gl:secondaryColorPointer specifies the location and data format
5758 of an array of color components to use when rendering. Size
5759 specifies the number of components per color, and must be 3.
5760 Type specifies the data type of each color component, and Stride
5761 specifies the byte stride from one color to the next, allowing
5762 vertices and attributes to be packed into a single array or
5763 stored in separate arrays.
5764 See external documentation.
5766 windowPos2d(X, Y) -> ok
5768 Types:
5770 X = float()
5772 Y = float()
5773 Specify the raster position in window coordinates for pixel
5775 operations
5776 The GL maintains a 3D position in window coordinates. This posi‐
5778 tion, called the raster position, is used to position pixel and
5779 bitmap write operations. It is maintained with subpixel accu‐
5780 racy. See gl:bitmap/7 , gl:drawPixels/5 , and gl:copyPixels/5 .
5781 See external documentation.
5783 windowPos2dv(V) -> ok
5785 Types:
5787 V = {X::float(), Y::float()}
5789 Equivalent to windowPos2d(X, Y).
5791 windowPos2f(X, Y) -> ok
5793 Types:
5795 X = float()
5797 Y = float()
5798 See windowPos2d/2
5800 windowPos2fv(V) -> ok
5802 Types:
5804 V = {X::float(), Y::float()}
5806 Equivalent to windowPos2f(X, Y).
5808 windowPos2i(X, Y) -> ok
5810 Types:
5812 X = integer()
5814 Y = integer()
5815 See windowPos2d/2
5817 windowPos2iv(V) -> ok
5819 Types:
5821 V = {X::integer(), Y::integer()}
5823 Equivalent to windowPos2i(X, Y).
5825 windowPos2s(X, Y) -> ok
5827 Types:
5829 X = integer()
5831 Y = integer()
5832 See windowPos2d/2
5834 windowPos2sv(V) -> ok
5836 Types:
5838 V = {X::integer(), Y::integer()}
5840 Equivalent to windowPos2s(X, Y).
5842 windowPos3d(X, Y, Z) -> ok
5844 Types:
5846 X = float()
5848 Y = float()
5849 Z = float()
5850 See windowPos2d/2
5852 windowPos3dv(V) -> ok
5854 Types:
5856 V = {X::float(), Y::float(), Z::float()}
5858 Equivalent to windowPos3d(X, Y, Z).
5860 windowPos3f(X, Y, Z) -> ok
5862 Types:
5864 X = float()
5866 Y = float()
5867 Z = float()
5868 See windowPos2d/2
5870 windowPos3fv(V) -> ok
5872 Types:
5874 V = {X::float(), Y::float(), Z::float()}
5876 Equivalent to windowPos3f(X, Y, Z).
5878 windowPos3i(X, Y, Z) -> ok
5880 Types:
5882 X = integer()
5884 Y = integer()
5885 Z = integer()
5886 See windowPos2d/2
5888 windowPos3iv(V) -> ok
5890 Types:
5892 V = {X::integer(), Y::integer(), Z::integer()}
5894 Equivalent to windowPos3i(X, Y, Z).
5896 windowPos3s(X, Y, Z) -> ok
5898 Types:
5900 X = integer()
5902 Y = integer()
5903 Z = integer()
5904 See windowPos2d/2
5906 windowPos3sv(V) -> ok
5908 Types:
5910 V = {X::integer(), Y::integer(), Z::integer()}
5912 Equivalent to windowPos3s(X, Y, Z).
5914 genQueries(N) -> [integer()]
5916 Types:
5918 N = integer()
5920 Generate query object names
5922 gl:genQueries returns N query object names in Ids . There is no
5924 guarantee that the names form a contiguous set of integers; how‐
5925 ever, it is guaranteed that none of the returned names was in
5926 use immediately before the call to gl:genQueries.
5927 See external documentation.
5929 deleteQueries(Ids) -> ok
5931 Types:
5933 Ids = [integer()]
5935 Delete named query objects
5937 gl:deleteQueries deletes N query objects named by the elements
5939 of the array Ids . After a query object is deleted, it has no
5940 contents, and its name is free for reuse (for example by gl:gen‐
5941 Queries/1 ).
5942 See external documentation.
5944 isQuery(Id) -> 0 | 1
5946 Types:
5948 Id = integer()
5950 Determine if a name corresponds to a query object
5952 gl:isQuery returns ?GL_TRUE if Id is currently the name of a
5954 query object. If Id is zero, or is a non-zero value that is not
5955 currently the name of a query object, or if an error occurs,
5956 gl:isQuery returns ?GL_FALSE.
5957 See external documentation.
5959 beginQuery(Target, Id) -> ok
5961 Types:
5963 Target = enum()
5965 Id = integer()
5966 Delimit the boundaries of a query object
5968 gl:beginQuery and gl:beginQuery/2 delimit the boundaries of a
5970 query object. Query must be a name previously returned from a
5971 call to gl:genQueries/1 . If a query object with name Id does
5972 not yet exist it is created with the type determined by Target .
5973 Target must be one of ?GL_SAMPLES_PASSED, ?GL_ANY_SAM‐
5974 PLES_PASSED, ?GL_PRIMITIVES_GENERATED , ?GL_TRANSFORM_FEED‐
5975 BACK_PRIMITIVES_WRITTEN, or ?GL_TIME_ELAPSED. The behavior of
5976 the query object depends on its type and is as follows.
5977 See external documentation.
5979 endQuery(Target) -> ok
5981 Types:
5983 Target = enum()
5985 See beginQuery/2
5987 getQueryiv(Target, Pname) -> integer()
5989 Types:
5991 Target = enum()
5993 Pname = enum()
5994 glGetQuery
5996 See external documentation.
5998 getQueryObjectiv(Id, Pname) -> integer()
6000 Types:
6002 Id = integer()
6004 Pname = enum()
6005 Return parameters of a query object
6007 gl:getQueryObject returns in Params a selected parameter of the
6009 query object specified by Id .
6010 See external documentation.
6012 getQueryObjectuiv(Id, Pname) -> integer()
6014 Types:
6016 Id = integer()
6018 Pname = enum()
6019 See getQueryObjectiv/2
6021 bindBuffer(Target, Buffer) -> ok
6023 Types:
6025 Target = enum()
6027 Buffer = integer()
6028 Bind a named buffer object
6030 gl:bindBuffer binds a buffer object to the specified buffer
6032 binding point. Calling gl:bindBuffer with Target set to one of
6033 the accepted symbolic constants and Buffer set to the name of a
6034 buffer object binds that buffer object name to the target. If no
6035 buffer object with name Buffer exists, one is created with that
6036 name. When a buffer object is bound to a target, the previous
6037 binding for that target is automatically broken.
6038 See external documentation.
6040 deleteBuffers(Buffers) -> ok
6042 Types:
6044 Buffers = [integer()]
6046 Delete named buffer objects
6048 gl:deleteBuffers deletes N buffer objects named by the elements
6050 of the array Buffers . After a buffer object is deleted, it has
6051 no contents, and its name is free for reuse (for example by
6052 gl:genBuffers/1 ). If a buffer object that is currently bound is
6053 deleted, the binding reverts to 0 (the absence of any buffer
6054 object).
6055 See external documentation.
6057 genBuffers(N) -> [integer()]
6059 Types:
6061 N = integer()
6063 Generate buffer object names
6065 gl:genBuffers returns N buffer object names in Buffers . There
6067 is no guarantee that the names form a contiguous set of inte‐
6068 gers; however, it is guaranteed that none of the returned names
6069 was in use immediately before the call to gl:genBuffers .
6070 See external documentation.
6072 isBuffer(Buffer) -> 0 | 1
6074 Types:
6076 Buffer = integer()
6078 Determine if a name corresponds to a buffer object
6080 gl:isBuffer returns ?GL_TRUE if Buffer is currently the name of
6082 a buffer object. If Buffer is zero, or is a non-zero value that
6083 is not currently the name of a buffer object, or if an error
6084 occurs, gl:isBuffer returns ?GL_FALSE .
6085 See external documentation.
6087 bufferData(Target, Size, Data, Usage) -> ok
6089 Types:
6091 Target = enum()
6093 Size = integer()
6094 Data = offset() | mem()
6095 Usage = enum()
6096 Creates and initializes a buffer object's data store
6098 gl:bufferData creates a new data store for the buffer object
6100 currently bound to Target . Any pre-existing data store is
6101 deleted. The new data store is created with the specified Size
6102 in bytes and Usage . If Data is not ?NULL, the data store is
6103 initialized with data from this pointer. In its initial state,
6104 the new data store is not mapped, it has a ?NULL mapped pointer,
6105 and its mapped access is ?GL_READ_WRITE .
6106 See external documentation.
6108 bufferSubData(Target, Offset, Size, Data) -> ok
6110 Types:
6112 Target = enum()
6114 Offset = integer()
6115 Size = integer()
6116 Data = offset() | mem()
6117 Updates a subset of a buffer object's data store
6119 gl:bufferSubData redefines some or all of the data store for the
6121 buffer object currently bound to Target . Data starting at byte
6122 offset Offset and extending for Size bytes is copied to the data
6123 store from the memory pointed to by Data . An error is thrown if
6124 Offset and Size together define a range beyond the bounds of the
6125 buffer object's data store.
6126 See external documentation.
6128 getBufferSubData(Target, Offset, Size, Data) -> ok
6130 Types:
6132 Target = enum()
6134 Offset = integer()
6135 Size = integer()
6136 Data = mem()
6137 Returns a subset of a buffer object's data store
6139 gl:getBufferSubData returns some or all of the data from the
6141 buffer object currently bound to Target . Data starting at byte
6142 offset Offset and extending for Size bytes is copied from the
6143 data store to the memory pointed to by Data . An error is thrown
6144 if the buffer object is currently mapped, or if Offset and Size
6145 together define a range beyond the bounds of the buffer object's
6146 data store.
6147 See external documentation.
6149 getBufferParameteriv(Target, Pname) -> integer()
6151 Types:
6153 Target = enum()
6155 Pname = enum()
6156 Return parameters of a buffer object
6158 gl:getBufferParameteriv returns in Data a selected parameter of
6160 the buffer object specified by Target .
6161 See external documentation.
6163 blendEquationSeparate(ModeRGB, ModeAlpha) -> ok
6165 Types:
6167 ModeRGB = enum()
6169 ModeAlpha = enum()
6170 Set the RGB blend equation and the alpha blend equation sepa‐
6172 rately
6173 The blend equations determines how a new pixel (the ''source''
6175 color) is combined with a pixel already in the framebuffer (the
6176 ''destination'' color). These functions specifie one blend equa‐
6177 tion for the RGB-color components and one blend equation for the
6178 alpha component. gl:blendEquationSeparatei specifies the blend
6179 equations for a single draw buffer whereas gl:blendEquationSepa‐
6180 rate sets the blend equations for all draw buffers.
6181 See external documentation.
6183 drawBuffers(Bufs) -> ok
6185 Types:
6187 Bufs = [enum()]
6189 Specifies a list of color buffers to be drawn into
6191 gl:drawBuffers defines an array of buffers into which outputs
6193 from the fragment shader data will be written. If a fragment
6194 shader writes a value to one or more user defined output vari‐
6195 ables, then the value of each variable will be written into the
6196 buffer specified at a location within Bufs corresponding to the
6197 location assigned to that user defined output. The draw buffer
6198 used for user defined outputs assigned to locations greater than
6199 or equal to N is implicitly set to ?GL_NONE and any data written
6200 to such an output is discarded.
6201 See external documentation.
6203 stencilOpSeparate(Face, Sfail, Dpfail, Dppass) -> ok
6205 Types:
6207 Face = enum()
6209 Sfail = enum()
6210 Dpfail = enum()
6211 Dppass = enum()
6212 Set front and/or back stencil test actions
6214 Stenciling, like depth-buffering, enables and disables drawing
6216 on a per-pixel basis. You draw into the stencil planes using GL
6217 drawing primitives, then render geometry and images, using the
6218 stencil planes to mask out portions of the screen. Stenciling is
6219 typically used in multipass rendering algorithms to achieve spe‐
6220 cial effects, such as decals, outlining, and constructive solid
6221 geometry rendering.
6222 See external documentation.
6224 stencilFuncSeparate(Face, Func, Ref, Mask) -> ok
6226 Types:
6228 Face = enum()
6230 Func = enum()
6231 Ref = integer()
6232 Mask = integer()
6233 Set front and/or back function and reference value for stencil
6235 testing
6236 Stenciling, like depth-buffering, enables and disables drawing
6238 on a per-pixel basis. You draw into the stencil planes using GL
6239 drawing primitives, then render geometry and images, using the
6240 stencil planes to mask out portions of the screen. Stenciling is
6241 typically used in multipass rendering algorithms to achieve spe‐
6242 cial effects, such as decals, outlining, and constructive solid
6243 geometry rendering.
6244 See external documentation.
6246 stencilMaskSeparate(Face, Mask) -> ok
6248 Types:
6250 Face = enum()
6252 Mask = integer()
6253 Control the front and/or back writing of individual bits in the
6255 stencil planes
6256 gl:stencilMaskSeparate controls the writing of individual bits
6258 in the stencil planes. The least significant n bits of Mask ,
6259 where n is the number of bits in the stencil buffer, specify a
6260 mask. Where a 1 appears in the mask, it's possible to write to
6261 the corresponding bit in the stencil buffer. Where a 0 appears,
6262 the corresponding bit is write-protected. Initially, all bits
6263 are enabled for writing.
6264 See external documentation.
6266 attachShader(Program, Shader) -> ok
6268 Types:
6270 Program = integer()
6272 Shader = integer()
6273 Attaches a shader object to a program object
6275 In order to create a complete shader program, there must be a
6277 way to specify the list of things that will be linked together.
6278 Program objects provide this mechanism. Shaders that are to be
6279 linked together in a program object must first be attached to
6280 that program object. gl:attachShader attaches the shader object
6281 specified by Shader to the program object specified by Program .
6282 This indicates that Shader will be included in link operations
6283 that will be performed on Program .
6284 See external documentation.
6286 bindAttribLocation(Program, Index, Name) -> ok
6288 Types:
6290 Program = integer()
6292 Index = integer()
6293 Name = string()
6294 Associates a generic vertex attribute index with a named
6296 attribute variable
6297 gl:bindAttribLocation is used to associate a user-defined
6299 attribute variable in the program object specified by Program
6300 with a generic vertex attribute index. The name of the user-
6301 defined attribute variable is passed as a null terminated string
6302 in Name . The generic vertex attribute index to be bound to this
6303 variable is specified by Index . When Program is made part of
6304 current state, values provided via the generic vertex attribute
6305 Index will modify the value of the user-defined attribute vari‐
6306 able specified by Name .
6307 See external documentation.
6309 compileShader(Shader) -> ok
6311 Types:
6313 Shader = integer()
6315 Compiles a shader object
6317 gl:compileShader compiles the source code strings that have been
6319 stored in the shader object specified by Shader .
6320 See external documentation.
6322 createProgram() -> integer()
6324 Creates a program object
6326 gl:createProgram creates an empty program object and returns a
6328 non-zero value by which it can be referenced. A program object
6329 is an object to which shader objects can be attached. This pro‐
6330 vides a mechanism to specify the shader objects that will be
6331 linked to create a program. It also provides a means for check‐
6332 ing the compatibility of the shaders that will be used to create
6333 a program (for instance, checking the compatibility between a
6334 vertex shader and a fragment shader). When no longer needed as
6335 part of a program object, shader objects can be detached.
6336 See external documentation.
6338 createShader(Type) -> integer()
6340 Types:
6342 Type = enum()
6344 Creates a shader object
6346 gl:createShader creates an empty shader object and returns a
6348 non-zero value by which it can be referenced. A shader object is
6349 used to maintain the source code strings that define a shader.
6350 ShaderType indicates the type of shader to be created. Five
6351 types of shader are supported. A shader of type ?GL_VER‐
6352 TEX_SHADER is a shader that is intended to run on the program‐
6353 mable vertex processor. A shader of type ?GL_TESS_CONTROL_SHADER
6354 is a shader that is intended to run on the programmable tessel‐
6355 lation processor in the control stage. A shader of type
6356 ?GL_TESS_EVALUATION_SHADER is a shader that is intended to run
6357 on the programmable tessellation processor in the evaluation
6358 stage. A shader of type ?GL_GEOMETRY_SHADER is a shader that is
6359 intended to run on the programmable geometry processor. A shader
6360 of type ?GL_FRAGMENT_SHADER is a shader that is intended to run
6361 on the programmable fragment processor.
6362 See external documentation.
6364 deleteProgram(Program) -> ok
6366 Types:
6368 Program = integer()
6370 Deletes a program object
6372 gl:deleteProgram frees the memory and invalidates the name asso‐
6374 ciated with the program object specified by Program. This com‐
6375 mand effectively undoes the effects of a call to gl:createPro‐
6376 gram/0 .
6377 See external documentation.
6379 deleteShader(Shader) -> ok
6381 Types:
6383 Shader = integer()
6385 Deletes a shader object
6387 gl:deleteShader frees the memory and invalidates the name asso‐
6389 ciated with the shader object specified by Shader . This command
6390 effectively undoes the effects of a call to gl:createShader/1 .
6391 See external documentation.
6393 detachShader(Program, Shader) -> ok
6395 Types:
6397 Program = integer()
6399 Shader = integer()
6400 Detaches a shader object from a program object to which it is
6402 attached
6403 gl:detachShader detaches the shader object specified by Shader
6405 from the program object specified by Program . This command can
6406 be used to undo the effect of the command gl:attachShader/2 .
6407 See external documentation.
6409 disableVertexAttribArray(Index) -> ok
6411 Types:
6413 Index = integer()
6415 Enable or disable a generic vertex attribute array
6417 gl:enableVertexAttribArray enables the generic vertex attribute
6419 array specified by Index . gl:disableVertexAttribArray disables
6420 the generic vertex attribute array specified by Index . By
6421 default, all client-side capabilities are disabled, including
6422 all generic vertex attribute arrays. If enabled, the values in
6423 the generic vertex attribute array will be accessed and used for
6424 rendering when calls are made to vertex array commands such as
6425 gl:drawArrays/3 , gl:drawElements/4 , gl:drawRangeElements/6 ,
6426 see glMultiDrawElements , or gl:multiDrawArrays/3 .
6427 See external documentation.
6429 enableVertexAttribArray(Index) -> ok
6431 Types:
6433 Index = integer()
6435 See disableVertexAttribArray/1
6437 getActiveAttrib(Program, Index, BufSize) -> {Size::integer(),
6439 Type::enum(), Name::string()}
6440 Types:
6442 Program = integer()
6444 Index = integer()
6445 BufSize = integer()
6446 Returns information about an active attribute variable for the
6448 specified program object
6449 gl:getActiveAttrib returns information about an active attribute
6451 variable in the program object specified by Program . The number
6452 of active attributes can be obtained by calling gl:getPro‐
6453 gramiv/2 with the value ?GL_ACTIVE_ATTRIBUTES. A value of 0 for
6454 Index selects the first active attribute variable. Permissible
6455 values for Index range from 0 to the number of active attribute
6456 variables minus 1.
6457 See external documentation.
6459 getActiveUniform(Program, Index, BufSize) -> {Size::integer(),
6461 Type::enum(), Name::string()}
6462 Types:
6464 Program = integer()
6466 Index = integer()
6467 BufSize = integer()
6468 Returns information about an active uniform variable for the
6470 specified program object
6471 gl:getActiveUniform returns information about an active uniform
6473 variable in the program object specified by Program . The number
6474 of active uniform variables can be obtained by calling gl:get‐
6475 Programiv/2 with the value ?GL_ACTIVE_UNIFORMS. A value of 0 for
6476 Index selects the first active uniform variable. Permissible
6477 values for Index range from 0 to the number of active uniform
6478 variables minus 1.
6479 See external documentation.
6481 getAttachedShaders(Program, MaxCount) -> [integer()]
6483 Types:
6485 Program = integer()
6487 MaxCount = integer()
6488 Returns the handles of the shader objects attached to a program
6490 object
6491 gl:getAttachedShaders returns the names of the shader objects
6493 attached to Program . The names of shader objects that are
6494 attached to Program will be returned in Shaders. The actual num‐
6495 ber of shader names written into Shaders is returned in Count.
6496 If no shader objects are attached to Program , Count is set to
6497 0. The maximum number of shader names that may be returned in
6498 Shaders is specified by MaxCount .
6499 See external documentation.
6501 getAttribLocation(Program, Name) -> integer()
6503 Types:
6505 Program = integer()
6507 Name = string()
6508 Returns the location of an attribute variable
6510 gl:getAttribLocation queries the previously linked program
6512 object specified by Program for the attribute variable specified
6513 by Name and returns the index of the generic vertex attribute
6514 that is bound to that attribute variable. If Name is a matrix
6515 attribute variable, the index of the first column of the matrix
6516 is returned. If the named attribute variable is not an active
6517 attribute in the specified program object or if Name starts with
6518 the reserved prefix "gl_", a value of -1 is returned.
6519 See external documentation.
6521 getProgramiv(Program, Pname) -> integer()
6523 Types:
6525 Program = integer()
6527 Pname = enum()
6528 Returns a parameter from a program object
6530 gl:getProgram returns in Params the value of a parameter for a
6532 specific program object. The following parameters are defined:
6533 See external documentation.
6535 getProgramInfoLog(Program, BufSize) -> string()
6537 Types:
6539 Program = integer()
6541 BufSize = integer()
6542 Returns the information log for a program object
6544 gl:getProgramInfoLog returns the information log for the speci‐
6546 fied program object. The information log for a program object is
6547 modified when the program object is linked or validated. The
6548 string that is returned will be null terminated.
6549 See external documentation.
6551 getShaderiv(Shader, Pname) -> integer()
6553 Types:
6555 Shader = integer()
6557 Pname = enum()
6558 Returns a parameter from a shader object
6560 gl:getShader returns in Params the value of a parameter for a
6562 specific shader object. The following parameters are defined:
6563 See external documentation.
6565 getShaderInfoLog(Shader, BufSize) -> string()
6567 Types:
6569 Shader = integer()
6571 BufSize = integer()
6572 Returns the information log for a shader object
6574 gl:getShaderInfoLog returns the information log for the speci‐
6576 fied shader object. The information log for a shader object is
6577 modified when the shader is compiled. The string that is
6578 returned will be null terminated.
6579 See external documentation.
6581 getShaderSource(Shader, BufSize) -> string()
6583 Types:
6585 Shader = integer()
6587 BufSize = integer()
6588 Returns the source code string from a shader object
6590 gl:getShaderSource returns the concatenation of the source code
6592 strings from the shader object specified by Shader . The source
6593 code strings for a shader object are the result of a previous
6594 call to gl:shaderSource/2 . The string returned by the function
6595 will be null terminated.
6596 See external documentation.
6598 getUniformLocation(Program, Name) -> integer()
6600 Types:
6602 Program = integer()
6604 Name = string()
6605 Returns the location of a uniform variable
6607 gl:getUniformLocation returns an integer that represents the
6609 location of a specific uniform variable within a program object.
6610 Name must be a null terminated string that contains no white
6611 space. Name must be an active uniform variable name in Program
6612 that is not a structure, an array of structures, or a subcompo‐
6613 nent of a vector or a matrix. This function returns -1 if Name
6614 does not correspond to an active uniform variable in Program ,
6615 if Name starts with the reserved prefix "gl_", or if Name is
6616 associated with an atomic counter or a named uniform block.
6617 See external documentation.
6619 getUniformfv(Program, Location) -> matrix()
6621 Types:
6623 Program = integer()
6625 Location = integer()
6626 Returns the value of a uniform variable
6628 gl:getUniform returns in Params the value(s) of the specified
6630 uniform variable. The type of the uniform variable specified by
6631 Location determines the number of values returned. If the uni‐
6632 form variable is defined in the shader as a boolean, int, or
6633 float, a single value will be returned. If it is defined as a
6634 vec2, ivec2, or bvec2, two values will be returned. If it is
6635 defined as a vec3, ivec3, or bvec3, three values will be
6636 returned, and so on. To query values stored in uniform variables
6637 declared as arrays, call gl:getUniform for each element of the
6638 array. To query values stored in uniform variables declared as
6639 structures, call gl:getUniform for each field in the structure.
6640 The values for uniform variables declared as a matrix will be
6641 returned in column major order.
6642 See external documentation.
6644 getUniformiv(Program, Location) -> {integer(), integer(), integer(),
6646 integer(), integer(), integer(), integer(), integer(), integer(), inte‐
6647 ger(), integer(), integer(), integer(), integer(), integer(), inte‐
6648 ger()}
6649 Types:
6651 Program = integer()
6653 Location = integer()
6654 See getUniformfv/2
6656 getVertexAttribdv(Index, Pname) -> {float(), float(), float(), float()}
6658 Types:
6660 Index = integer()
6662 Pname = enum()
6663 Return a generic vertex attribute parameter
6665 gl:getVertexAttrib returns in Params the value of a generic ver‐
6667 tex attribute parameter. The generic vertex attribute to be
6668 queried is specified by Index , and the parameter to be queried
6669 is specified by Pname .
6670 See external documentation.
6672 getVertexAttribfv(Index, Pname) -> {float(), float(), float(), float()}
6674 Types:
6676 Index = integer()
6678 Pname = enum()
6679 See getVertexAttribdv/2
6681 getVertexAttribiv(Index, Pname) -> {integer(), integer(), integer(),
6683 integer()}
6684 Types:
6686 Index = integer()
6688 Pname = enum()
6689 See getVertexAttribdv/2
6691 isProgram(Program) -> 0 | 1
6693 Types:
6695 Program = integer()
6697 Determines if a name corresponds to a program object
6699 gl:isProgram returns ?GL_TRUE if Program is the name of a pro‐
6701 gram object previously created with gl:createProgram/0 and not
6702 yet deleted with gl:deleteProgram/1 . If Program is zero or a
6703 non-zero value that is not the name of a program object, or if
6704 an error occurs, gl:isProgram returns ?GL_FALSE.
6705 See external documentation.
6707 isShader(Shader) -> 0 | 1
6709 Types:
6711 Shader = integer()
6713 Determines if a name corresponds to a shader object
6715 gl:isShader returns ?GL_TRUE if Shader is the name of a shader
6717 object previously created with gl:createShader/1 and not yet
6718 deleted with gl:deleteShader/1 . If Shader is zero or a non-zero
6719 value that is not the name of a shader object, or if an error
6720 occurs, gl:isShader returns ?GL_FALSE.
6721 See external documentation.
6723 linkProgram(Program) -> ok
6725 Types:
6727 Program = integer()
6729 Links a program object
6731 gl:linkProgram links the program object specified by Program .
6733 If any shader objects of type ?GL_VERTEX_SHADER are attached to
6734 Program , they will be used to create an executable that will
6735 run on the programmable vertex processor. If any shader objects
6736 of type ?GL_GEOMETRY_SHADER are attached to Program , they will
6737 be used to create an executable that will run on the program‐
6738 mable geometry processor. If any shader objects of type
6739 ?GL_FRAGMENT_SHADER are attached to Program , they will be used
6740 to create an executable that will run on the programmable frag‐
6741 ment processor.
6742 See external documentation.
6744 shaderSource(Shader, String) -> ok
6746 Types:
6748 Shader = integer()
6750 String = iolist()
6751 Replaces the source code in a shader object
6753 gl:shaderSource sets the source code in Shader to the source
6755 code in the array of strings specified by String . Any source
6756 code previously stored in the shader object is completely
6757 replaced. The number of strings in the array is specified by
6758 Count . If Length is ?NULL, each string is assumed to be null
6759 terminated. If Length is a value other than ?NULL, it points to
6760 an array containing a string length for each of the correspond‐
6761 ing elements of String . Each element in the Length array may
6762 contain the length of the corresponding string (the null charac‐
6763 ter is not counted as part of the string length) or a value less
6764 than 0 to indicate that the string is null terminated. The
6765 source code strings are not scanned or parsed at this time; they
6766 are simply copied into the specified shader object.
6767 See external documentation.
6769 useProgram(Program) -> ok
6771 Types:
6773 Program = integer()
6775 Installs a program object as part of current rendering state
6777 gl:useProgram installs the program object specified by Program
6779 as part of current rendering state. One or more executables are
6780 created in a program object by successfully attaching shader
6781 objects to it with gl:attachShader/2 , successfully compiling
6782 the shader objects with gl:compileShader/1 , and successfully
6783 linking the program object with gl:linkProgram/1 .
6784 See external documentation.
6786 uniform1f(Location, V0) -> ok
6788 Types:
6790 Location = integer()
6792 V0 = float()
6793 Specify the value of a uniform variable for the current program
6795 object
6796 gl:uniform modifies the value of a uniform variable or a uniform
6798 variable array. The location of the uniform variable to be modi‐
6799 fied is specified by Location , which should be a value returned
6800 by gl:getUniformLocation/2 . gl:uniform operates on the program
6801 object that was made part of current state by calling gl:usePro‐
6802 gram/1 .
6803 See external documentation.
6805 uniform2f(Location, V0, V1) -> ok
6807 Types:
6809 Location = integer()
6811 V0 = float()
6812 V1 = float()
6813 See uniform1f/2
6815 uniform3f(Location, V0, V1, V2) -> ok
6817 Types:
6819 Location = integer()
6821 V0 = float()
6822 V1 = float()
6823 V2 = float()
6824 See uniform1f/2
6826 uniform4f(Location, V0, V1, V2, V3) -> ok
6828 Types:
6830 Location = integer()
6832 V0 = float()
6833 V1 = float()
6834 V2 = float()
6835 V3 = float()
6836 See uniform1f/2
6838 uniform1i(Location, V0) -> ok
6840 Types:
6842 Location = integer()
6844 V0 = integer()
6845 See uniform1f/2
6847 uniform2i(Location, V0, V1) -> ok
6849 Types:
6851 Location = integer()
6853 V0 = integer()
6854 V1 = integer()
6855 See uniform1f/2
6857 uniform3i(Location, V0, V1, V2) -> ok
6859 Types:
6861 Location = integer()
6863 V0 = integer()
6864 V1 = integer()
6865 V2 = integer()
6866 See uniform1f/2
6868 uniform4i(Location, V0, V1, V2, V3) -> ok
6870 Types:
6872 Location = integer()
6874 V0 = integer()
6875 V1 = integer()
6876 V2 = integer()
6877 V3 = integer()
6878 See uniform1f/2
6880 uniform1fv(Location, Value) -> ok
6882 Types:
6884 Location = integer()
6886 Value = [float()]
6887 See uniform1f/2
6889 uniform2fv(Location, Value) -> ok
6891 Types:
6893 Location = integer()
6895 Value = [{float(), float()}]
6896 See uniform1f/2
6898 uniform3fv(Location, Value) -> ok
6900 Types:
6902 Location = integer()
6904 Value = [{float(), float(), float()}]
6905 See uniform1f/2
6907 uniform4fv(Location, Value) -> ok
6909 Types:
6911 Location = integer()
6913 Value = [{float(), float(), float(), float()}]
6914 See uniform1f/2
6916 uniform1iv(Location, Value) -> ok
6918 Types:
6920 Location = integer()
6922 Value = [integer()]
6923 See uniform1f/2
6925 uniform2iv(Location, Value) -> ok
6927 Types:
6929 Location = integer()
6931 Value = [{integer(), integer()}]
6932 See uniform1f/2
6934 uniform3iv(Location, Value) -> ok
6936 Types:
6938 Location = integer()
6940 Value = [{integer(), integer(), integer()}]
6941 See uniform1f/2
6943 uniform4iv(Location, Value) -> ok
6945 Types:
6947 Location = integer()
6949 Value = [{integer(), integer(), integer(), integer()}]
6950 See uniform1f/2
6952 uniformMatrix2fv(Location, Transpose, Value) -> ok
6954 Types:
6956 Location = integer()
6958 Transpose = 0 | 1
6959 Value = [{float(), float(), float(), float()}]
6960 See uniform1f/2
6962 uniformMatrix3fv(Location, Transpose, Value) -> ok
6964 Types:
6966 Location = integer()
6968 Transpose = 0 | 1
6969 Value = [{float(), float(), float(), float(), float(),
6970 float(), float(), float(), float()}]
6971 See uniform1f/2
6973 uniformMatrix4fv(Location, Transpose, Value) -> ok
6975 Types:
6977 Location = integer()
6979 Transpose = 0 | 1
6980 Value = [{float(), float(), float(), float(), float(),
6981 float(), float(), float(), float(), float(), float(),
6982 float(), float(), float(), float(), float()}]
6983 See uniform1f/2
6985 validateProgram(Program) -> ok
6987 Types:
6989 Program = integer()
6991 Validates a program object
6993 gl:validateProgram checks to see whether the executables con‐
6995 tained in Program can execute given the current OpenGL state.
6996 The information generated by the validation process will be
6997 stored in Program 's information log. The validation information
6998 may consist of an empty string, or it may be a string containing
6999 information about how the current program object interacts with
7000 the rest of current OpenGL state. This provides a way for OpenGL
7001 implementers to convey more information about why the current
7002 program is inefficient, suboptimal, failing to execute, and so
7003 on.
7004 See external documentation.
7006 vertexAttrib1d(Index, X) -> ok
7008 Types:
7010 Index = integer()
7012 X = float()
7013 Specifies the value of a generic vertex attribute
7015 The gl:vertexAttrib family of entry points allows an application
7017 to pass generic vertex attributes in numbered locations.
7018 See external documentation.
7020 vertexAttrib1dv(Index::integer(), V) -> ok
7022 Types:
7024 V = {X::float()}
7026 Equivalent to vertexAttrib1d(Index, X).
7028 vertexAttrib1f(Index, X) -> ok
7030 Types:
7032 Index = integer()
7034 X = float()
7035 See vertexAttrib1d/2
7037 vertexAttrib1fv(Index::integer(), V) -> ok
7039 Types:
7041 V = {X::float()}
7043 Equivalent to vertexAttrib1f(Index, X).
7045 vertexAttrib1s(Index, X) -> ok
7047 Types:
7049 Index = integer()
7051 X = integer()
7052 See vertexAttrib1d/2
7054 vertexAttrib1sv(Index::integer(), V) -> ok
7056 Types:
7058 V = {X::integer()}
7060 Equivalent to vertexAttrib1s(Index, X).
7062 vertexAttrib2d(Index, X, Y) -> ok
7064 Types:
7066 Index = integer()
7068 X = float()
7069 Y = float()
7070 See vertexAttrib1d/2
7072 vertexAttrib2dv(Index::integer(), V) -> ok
7074 Types:
7076 V = {X::float(), Y::float()}
7078 Equivalent to vertexAttrib2d(Index, X, Y).
7080 vertexAttrib2f(Index, X, Y) -> ok
7082 Types:
7084 Index = integer()
7086 X = float()
7087 Y = float()
7088 See vertexAttrib1d/2
7090 vertexAttrib2fv(Index::integer(), V) -> ok
7092 Types:
7094 V = {X::float(), Y::float()}
7096 Equivalent to vertexAttrib2f(Index, X, Y).
7098 vertexAttrib2s(Index, X, Y) -> ok
7100 Types:
7102 Index = integer()
7104 X = integer()
7105 Y = integer()
7106 See vertexAttrib1d/2
7108 vertexAttrib2sv(Index::integer(), V) -> ok
7110 Types:
7112 V = {X::integer(), Y::integer()}
7114 Equivalent to vertexAttrib2s(Index, X, Y).
7116 vertexAttrib3d(Index, X, Y, Z) -> ok
7118 Types:
7120 Index = integer()
7122 X = float()
7123 Y = float()
7124 Z = float()
7125 See vertexAttrib1d/2
7127 vertexAttrib3dv(Index::integer(), V) -> ok
7129 Types:
7131 V = {X::float(), Y::float(), Z::float()}
7133 Equivalent to vertexAttrib3d(Index, X, Y, Z).
7135 vertexAttrib3f(Index, X, Y, Z) -> ok
7137 Types:
7139 Index = integer()
7141 X = float()
7142 Y = float()
7143 Z = float()
7144 See vertexAttrib1d/2
7146 vertexAttrib3fv(Index::integer(), V) -> ok
7148 Types:
7150 V = {X::float(), Y::float(), Z::float()}
7152 Equivalent to vertexAttrib3f(Index, X, Y, Z).
7154 vertexAttrib3s(Index, X, Y, Z) -> ok
7156 Types:
7158 Index = integer()
7160 X = integer()
7161 Y = integer()
7162 Z = integer()
7163 See vertexAttrib1d/2
7165 vertexAttrib3sv(Index::integer(), V) -> ok
7167 Types:
7169 V = {X::integer(), Y::integer(), Z::integer()}
7171 Equivalent to vertexAttrib3s(Index, X, Y, Z).
7173 vertexAttrib4Nbv(Index, V) -> ok
7175 Types:
7177 Index = integer()
7179 V = {integer(), integer(), integer(), integer()}
7180 See vertexAttrib1d/2
7182 vertexAttrib4Niv(Index, V) -> ok
7184 Types:
7186 Index = integer()
7188 V = {integer(), integer(), integer(), integer()}
7189 See vertexAttrib1d/2
7191 vertexAttrib4Nsv(Index, V) -> ok
7193 Types:
7195 Index = integer()
7197 V = {integer(), integer(), integer(), integer()}
7198 See vertexAttrib1d/2
7200 vertexAttrib4Nub(Index, X, Y, Z, W) -> ok
7202 Types:
7204 Index = integer()
7206 X = integer()
7207 Y = integer()
7208 Z = integer()
7209 W = integer()
7210 See vertexAttrib1d/2
7212 vertexAttrib4Nubv(Index::integer(), V) -> ok
7214 Types:
7216 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
7218 Equivalent to vertexAttrib4Nub(Index, X, Y, Z, W).
7220 vertexAttrib4Nuiv(Index, V) -> ok
7222 Types:
7224 Index = integer()
7226 V = {integer(), integer(), integer(), integer()}
7227 See vertexAttrib1d/2
7229 vertexAttrib4Nusv(Index, V) -> ok
7231 Types:
7233 Index = integer()
7235 V = {integer(), integer(), integer(), integer()}
7236 See vertexAttrib1d/2
7238 vertexAttrib4bv(Index, V) -> ok
7240 Types:
7242 Index = integer()
7244 V = {integer(), integer(), integer(), integer()}
7245 See vertexAttrib1d/2
7247 vertexAttrib4d(Index, X, Y, Z, W) -> ok
7249 Types:
7251 Index = integer()
7253 X = float()
7254 Y = float()
7255 Z = float()
7256 W = float()
7257 See vertexAttrib1d/2
7259 vertexAttrib4dv(Index::integer(), V) -> ok
7261 Types:
7263 V = {X::float(), Y::float(), Z::float(), W::float()}
7265 Equivalent to vertexAttrib4d(Index, X, Y, Z, W).
7267 vertexAttrib4f(Index, X, Y, Z, W) -> ok
7269 Types:
7271 Index = integer()
7273 X = float()
7274 Y = float()
7275 Z = float()
7276 W = float()
7277 See vertexAttrib1d/2
7279 vertexAttrib4fv(Index::integer(), V) -> ok
7281 Types:
7283 V = {X::float(), Y::float(), Z::float(), W::float()}
7285 Equivalent to vertexAttrib4f(Index, X, Y, Z, W).
7287 vertexAttrib4iv(Index, V) -> ok
7289 Types:
7291 Index = integer()
7293 V = {integer(), integer(), integer(), integer()}
7294 See vertexAttrib1d/2
7296 vertexAttrib4s(Index, X, Y, Z, W) -> ok
7298 Types:
7300 Index = integer()
7302 X = integer()
7303 Y = integer()
7304 Z = integer()
7305 W = integer()
7306 See vertexAttrib1d/2
7308 vertexAttrib4sv(Index::integer(), V) -> ok
7310 Types:
7312 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
7314 Equivalent to vertexAttrib4s(Index, X, Y, Z, W).
7316 vertexAttrib4ubv(Index, V) -> ok
7318 Types:
7320 Index = integer()
7322 V = {integer(), integer(), integer(), integer()}
7323 See vertexAttrib1d/2
7325 vertexAttrib4uiv(Index, V) -> ok
7327 Types:
7329 Index = integer()
7331 V = {integer(), integer(), integer(), integer()}
7332 See vertexAttrib1d/2
7334 vertexAttrib4usv(Index, V) -> ok
7336 Types:
7338 Index = integer()
7340 V = {integer(), integer(), integer(), integer()}
7341 See vertexAttrib1d/2
7343 vertexAttribPointer(Index, Size, Type, Normalized, Stride, Pointer) ->
7345 ok
7346 Types:
7348 Index = integer()
7350 Size = integer()
7351 Type = enum()
7352 Normalized = 0 | 1
7353 Stride = integer()
7354 Pointer = offset() | mem()
7355 Define an array of generic vertex attribute data
7357 gl:vertexAttribPointer, gl:vertexAttribIPointer and gl:vertexAt‐
7359 tribLPointer specify the location and data format of the array
7360 of generic vertex attributes at index Index to use when render‐
7361 ing. Size specifies the number of components per attribute and
7362 must be 1, 2, 3, 4, or ?GL_BGRA. Type specifies the data type of
7363 each component, and Stride specifies the byte stride from one
7364 attribute to the next, allowing vertices and attributes to be
7365 packed into a single array or stored in separate arrays.
7366 See external documentation.
7368 uniformMatrix2x3fv(Location, Transpose, Value) -> ok
7370 Types:
7372 Location = integer()
7374 Transpose = 0 | 1
7375 Value = [{float(), float(), float(), float(), float(),
7376 float()}]
7377 See uniform1f/2
7379 uniformMatrix3x2fv(Location, Transpose, Value) -> ok
7381 Types:
7383 Location = integer()
7385 Transpose = 0 | 1
7386 Value = [{float(), float(), float(), float(), float(),
7387 float()}]
7388 See uniform1f/2
7390 uniformMatrix2x4fv(Location, Transpose, Value) -> ok
7392 Types:
7394 Location = integer()
7396 Transpose = 0 | 1
7397 Value = [{float(), float(), float(), float(), float(),
7398 float(), float(), float()}]
7399 See uniform1f/2
7401 uniformMatrix4x2fv(Location, Transpose, Value) -> ok
7403 Types:
7405 Location = integer()
7407 Transpose = 0 | 1
7408 Value = [{float(), float(), float(), float(), float(),
7409 float(), float(), float()}]
7410 See uniform1f/2
7412 uniformMatrix3x4fv(Location, Transpose, Value) -> ok
7414 Types:
7416 Location = integer()
7418 Transpose = 0 | 1
7419 Value = [{float(), float(), float(), float(), float(),
7420 float(), float(), float(), float(), float(), float(),
7421 float()}]
7422 See uniform1f/2
7424 uniformMatrix4x3fv(Location, Transpose, Value) -> ok
7426 Types:
7428 Location = integer()
7430 Transpose = 0 | 1
7431 Value = [{float(), float(), float(), float(), float(),
7432 float(), float(), float(), float(), float(), float(),
7433 float()}]
7434 See uniform1f/2
7436 colorMaski(Index, R, G, B, A) -> ok
7438 Types:
7440 Index = integer()
7442 R = 0 | 1
7443 G = 0 | 1
7444 B = 0 | 1
7445 A = 0 | 1
7446 glColorMaski
7448 See external documentation.
7450 getBooleani_v(Target, Index) -> [0 | 1]
7452 Types:
7454 Target = enum()
7456 Index = integer()
7457 See getBooleanv/1
7459 getIntegeri_v(Target, Index) -> [integer()]
7461 Types:
7463 Target = enum()
7465 Index = integer()
7466 See getBooleanv/1
7468 enablei(Target, Index) -> ok
7470 Types:
7472 Target = enum()
7474 Index = integer()
7475 See enable/1
7477 disablei(Target, Index) -> ok
7479 Types:
7481 Target = enum()
7483 Index = integer()
7484 glEnablei
7486 See external documentation.
7488 isEnabledi(Target, Index) -> 0 | 1
7490 Types:
7492 Target = enum()
7494 Index = integer()
7495 glIsEnabledi
7497 See external documentation.
7499 beginTransformFeedback(PrimitiveMode) -> ok
7501 Types:
7503 PrimitiveMode = enum()
7505 Start transform feedback operation
7507 Transform feedback mode captures the values of varying variables
7509 written by the vertex shader (or, if active, the geometry
7510 shader). Transform feedback is said to be active after a call to
7511 gl:beginTransformFeedback until a subsequent call to gl:begin‐
7512 TransformFeedback/1 . Transform feedback commands must be
7513 paired.
7514 See external documentation.
7516 endTransformFeedback() -> ok
7518 See beginTransformFeedback/1
7520 bindBufferRange(Target, Index, Buffer, Offset, Size) -> ok
7522 Types:
7524 Target = enum()
7526 Index = integer()
7527 Buffer = integer()
7528 Offset = integer()
7529 Size = integer()
7530 Bind a range within a buffer object to an indexed buffer target
7532 gl:bindBufferRange binds a range the buffer object Buffer repre‐
7534 sented by Offset and Size to the binding point at index Index of
7535 the array of targets specified by Target . Each Target repre‐
7536 sents an indexed array of buffer binding points, as well as a
7537 single general binding point that can be used by other buffer
7538 manipulation functions such as gl:bindBuffer/2 or see glMap‐
7539 Buffer. In addition to binding a range of Buffer to the indexed
7540 buffer binding target, gl:bindBufferBase also binds the range to
7541 the generic buffer binding point specified by Target .
7542 See external documentation.
7544 bindBufferBase(Target, Index, Buffer) -> ok
7546 Types:
7548 Target = enum()
7550 Index = integer()
7551 Buffer = integer()
7552 Bind a buffer object to an indexed buffer target
7554 gl:bindBufferBase binds the buffer object Buffer to the binding
7556 point at index Index of the array of targets specified by Target
7557 . Each Target represents an indexed array of buffer binding
7558 points, as well as a single general binding point that can be
7559 used by other buffer manipulation functions such as gl:bind‐
7560 Buffer/2 or see glMapBuffer. In addition to binding Buffer to
7561 the indexed buffer binding target, gl:bindBufferBase also binds
7562 Buffer to the generic buffer binding point specified by Target .
7563 See external documentation.
7565 transformFeedbackVaryings(Program, Varyings, BufferMode) -> ok
7567 Types:
7569 Program = integer()
7571 Varyings = iolist()
7572 BufferMode = enum()
7573 Specify values to record in transform feedback buffers
7575 The names of the vertex or geometry shader outputs to be
7577 recorded in transform feedback mode are specified using
7578 gl:transformFeedbackVaryings. When a geometry shader is active,
7579 transform feedback records the values of selected geometry
7580 shader output variables from the emitted vertices. Otherwise,
7581 the values of the selected vertex shader outputs are recorded.
7582 See external documentation.
7584 getTransformFeedbackVarying(Program, Index, BufSize) -> {Size::inte‐
7586 ger(), Type::enum(), Name::string()}
7587 Types:
7589 Program = integer()
7591 Index = integer()
7592 BufSize = integer()
7593 Retrieve information about varying variables selected for trans‐
7595 form feedback
7596 Information about the set of varying variables in a linked pro‐
7598 gram that will be captured during transform feedback may be
7599 retrieved by calling gl:getTransformFeedbackVarying. gl:get‐
7600 TransformFeedbackVarying provides information about the varying
7601 variable selected by Index . An Index of 0 selects the first
7602 varying variable specified in the Varyings array passed to
7603 gl:transformFeedbackVaryings/3 , and an Index of ?GL_TRANS‐
7604 FORM_FEEDBACK_VARYINGS-1 selects the last such variable.
7605 See external documentation.
7607 clampColor(Target, Clamp) -> ok
7609 Types:
7611 Target = enum()
7613 Clamp = enum()
7614 specify whether data read via
7616 gl:readPixels/7 should be clamped
7618 gl:clampColor controls color clamping that is performed during
7620 gl:readPixels/7 . Target must be ?GL_CLAMP_READ_COLOR. If Clamp
7621 is ?GL_TRUE, read color clamping is enabled; if Clamp is
7622 ?GL_FALSE, read color clamping is disabled. If Clamp is
7623 ?GL_FIXED_ONLY, read color clamping is enabled only if the
7624 selected read buffer has fixed point components and disabled
7625 otherwise.
7626 See external documentation.
7628 beginConditionalRender(Id, Mode) -> ok
7630 Types:
7632 Id = integer()
7634 Mode = enum()
7635 Start conditional rendering
7637 Conditional rendering is started using gl:beginConditionalRender
7639 and ended using gl:endConditionalRender . During conditional
7640 rendering, all vertex array commands, as well as gl:clear/1 and
7641 gl:clearBufferiv/3 have no effect if the (?GL_SAMPLES_PASSED)
7642 result of the query object Id is zero, or if the (?GL_ANY_SAM‐
7643 PLES_PASSED) result is ?GL_FALSE . The results of commands set‐
7644 ting the current vertex state, such as gl:vertexAttrib1d/2 are
7645 undefined. If the (?GL_SAMPLES_PASSED) result is non-zero or if
7646 the (?GL_ANY_SAMPLES_PASSED ) result is ?GL_TRUE, such commands
7647 are not discarded. The Id parameter to gl:beginConditionalRender
7648 must be the name of a query object previously returned from a
7649 call to gl:genQueries/1 . Mode specifies how the results of the
7650 query object are to be interpreted. If Mode is ?GL_QUERY_WAIT,
7651 the GL waits for the results of the query to be available and
7652 then uses the results to determine if subsequent rendering com‐
7653 mands are discarded. If Mode is ?GL_QUERY_NO_WAIT, the GL may
7654 choose to unconditionally execute the subsequent rendering com‐
7655 mands without waiting for the query to complete.
7656 See external documentation.
7658 endConditionalRender() -> ok
7660 See beginConditionalRender/2
7662 vertexAttribIPointer(Index, Size, Type, Stride, Pointer) -> ok
7664 Types:
7666 Index = integer()
7668 Size = integer()
7669 Type = enum()
7670 Stride = integer()
7671 Pointer = offset() | mem()
7672 glVertexAttribIPointer
7674 See external documentation.
7676 getVertexAttribIiv(Index, Pname) -> {integer(), integer(), integer(),
7678 integer()}
7679 Types:
7681 Index = integer()
7683 Pname = enum()
7684 See getVertexAttribdv/2
7686 getVertexAttribIuiv(Index, Pname) -> {integer(), integer(), integer(),
7688 integer()}
7689 Types:
7691 Index = integer()
7693 Pname = enum()
7694 glGetVertexAttribI
7696 See external documentation.
7698 vertexAttribI1i(Index, X) -> ok
7700 Types:
7702 Index = integer()
7704 X = integer()
7705 See vertexAttrib1d/2
7707 vertexAttribI2i(Index, X, Y) -> ok
7709 Types:
7711 Index = integer()
7713 X = integer()
7714 Y = integer()
7715 See vertexAttrib1d/2
7717 vertexAttribI3i(Index, X, Y, Z) -> ok
7719 Types:
7721 Index = integer()
7723 X = integer()
7724 Y = integer()
7725 Z = integer()
7726 See vertexAttrib1d/2
7728 vertexAttribI4i(Index, X, Y, Z, W) -> ok
7730 Types:
7732 Index = integer()
7734 X = integer()
7735 Y = integer()
7736 Z = integer()
7737 W = integer()
7738 See vertexAttrib1d/2
7740 vertexAttribI1ui(Index, X) -> ok
7742 Types:
7744 Index = integer()
7746 X = integer()
7747 See vertexAttrib1d/2
7749 vertexAttribI2ui(Index, X, Y) -> ok
7751 Types:
7753 Index = integer()
7755 X = integer()
7756 Y = integer()
7757 See vertexAttrib1d/2
7759 vertexAttribI3ui(Index, X, Y, Z) -> ok
7761 Types:
7763 Index = integer()
7765 X = integer()
7766 Y = integer()
7767 Z = integer()
7768 See vertexAttrib1d/2
7770 vertexAttribI4ui(Index, X, Y, Z, W) -> ok
7772 Types:
7774 Index = integer()
7776 X = integer()
7777 Y = integer()
7778 Z = integer()
7779 W = integer()
7780 See vertexAttrib1d/2
7782 vertexAttribI1iv(Index::integer(), V) -> ok
7784 Types:
7786 V = {X::integer()}
7788 Equivalent to vertexAttribI1i(Index, X).
7790 vertexAttribI2iv(Index::integer(), V) -> ok
7792 Types:
7794 V = {X::integer(), Y::integer()}
7796 Equivalent to vertexAttribI2i(Index, X, Y).
7798 vertexAttribI3iv(Index::integer(), V) -> ok
7800 Types:
7802 V = {X::integer(), Y::integer(), Z::integer()}
7804 Equivalent to vertexAttribI3i(Index, X, Y, Z).
7806 vertexAttribI4iv(Index::integer(), V) -> ok
7808 Types:
7810 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
7812 Equivalent to vertexAttribI4i(Index, X, Y, Z, W).
7814 vertexAttribI1uiv(Index::integer(), V) -> ok
7816 Types:
7818 V = {X::integer()}
7820 Equivalent to vertexAttribI1ui(Index, X).
7822 vertexAttribI2uiv(Index::integer(), V) -> ok
7824 Types:
7826 V = {X::integer(), Y::integer()}
7828 Equivalent to vertexAttribI2ui(Index, X, Y).
7830 vertexAttribI3uiv(Index::integer(), V) -> ok
7832 Types:
7834 V = {X::integer(), Y::integer(), Z::integer()}
7836 Equivalent to vertexAttribI3ui(Index, X, Y, Z).
7838 vertexAttribI4uiv(Index::integer(), V) -> ok
7840 Types:
7842 V = {X::integer(), Y::integer(), Z::integer(), W::integer()}
7844 Equivalent to vertexAttribI4ui(Index, X, Y, Z, W).
7846 vertexAttribI4bv(Index, V) -> ok
7848 Types:
7850 Index = integer()
7852 V = {integer(), integer(), integer(), integer()}
7853 See vertexAttrib1d/2
7855 vertexAttribI4sv(Index, V) -> ok
7857 Types:
7859 Index = integer()
7861 V = {integer(), integer(), integer(), integer()}
7862 See vertexAttrib1d/2
7864 vertexAttribI4ubv(Index, V) -> ok
7866 Types:
7868 Index = integer()
7870 V = {integer(), integer(), integer(), integer()}
7871 See vertexAttrib1d/2
7873 vertexAttribI4usv(Index, V) -> ok
7875 Types:
7877 Index = integer()
7879 V = {integer(), integer(), integer(), integer()}
7880 See vertexAttrib1d/2
7882 getUniformuiv(Program, Location) -> {integer(), integer(), integer(),
7884 integer(), integer(), integer(), integer(), integer(), integer(), inte‐
7885 ger(), integer(), integer(), integer(), integer(), integer(), inte‐
7886 ger()}
7887 Types:
7889 Program = integer()
7891 Location = integer()
7892 See getUniformfv/2
7894 bindFragDataLocation(Program, Color, Name) -> ok
7896 Types:
7898 Program = integer()
7900 Color = integer()
7901 Name = string()
7902 Bind a user-defined varying out variable to a fragment shader
7904 color number
7905 gl:bindFragDataLocation explicitly specifies the binding of the
7907 user-defined varying out variable Name to fragment shader color
7908 number ColorNumber for program Program . If Name was bound pre‐
7909 viously, its assigned binding is replaced with ColorNumber .
7910 Name must be a null-terminated string. ColorNumber must be less
7911 than ?GL_MAX_DRAW_BUFFERS .
7912 See external documentation.
7914 getFragDataLocation(Program, Name) -> integer()
7916 Types:
7918 Program = integer()
7920 Name = string()
7921 Query the bindings of color numbers to user-defined varying out
7923 variables
7924 gl:getFragDataLocation retrieves the assigned color number bind‐
7926 ing for the user-defined varying out variable Name for program
7927 Program . Program must have previously been linked. Name must be
7928 a null-terminated string. If Name is not the name of an active
7929 user-defined varying out fragment shader variable within Program
7930 , -1 will be returned.
7931 See external documentation.
7933 uniform1ui(Location, V0) -> ok
7935 Types:
7937 Location = integer()
7939 V0 = integer()
7940 See uniform1f/2
7942 uniform2ui(Location, V0, V1) -> ok
7944 Types:
7946 Location = integer()
7948 V0 = integer()
7949 V1 = integer()
7950 See uniform1f/2
7952 uniform3ui(Location, V0, V1, V2) -> ok
7954 Types:
7956 Location = integer()
7958 V0 = integer()
7959 V1 = integer()
7960 V2 = integer()
7961 See uniform1f/2
7963 uniform4ui(Location, V0, V1, V2, V3) -> ok
7965 Types:
7967 Location = integer()
7969 V0 = integer()
7970 V1 = integer()
7971 V2 = integer()
7972 V3 = integer()
7973 See uniform1f/2
7975 uniform1uiv(Location, Value) -> ok
7977 Types:
7979 Location = integer()
7981 Value = [integer()]
7982 See uniform1f/2
7984 uniform2uiv(Location, Value) -> ok
7986 Types:
7988 Location = integer()
7990 Value = [{integer(), integer()}]
7991 See uniform1f/2
7993 uniform3uiv(Location, Value) -> ok
7995 Types:
7997 Location = integer()
7999 Value = [{integer(), integer(), integer()}]
8000 See uniform1f/2
8002 uniform4uiv(Location, Value) -> ok
8004 Types:
8006 Location = integer()
8008 Value = [{integer(), integer(), integer(), integer()}]
8009 See uniform1f/2
8011 texParameterIiv(Target, Pname, Params) -> ok
8013 Types:
8015 Target = enum()
8017 Pname = enum()
8018 Params = tuple()
8019 See texParameterf/3
8021 texParameterIuiv(Target, Pname, Params) -> ok
8023 Types:
8025 Target = enum()
8027 Pname = enum()
8028 Params = tuple()
8029 glTexParameterI
8031 See external documentation.
8033 getTexParameterIiv(Target, Pname) -> {integer(), integer(), integer(),
8035 integer()}
8036 Types:
8038 Target = enum()
8040 Pname = enum()
8041 See getTexParameterfv/2
8043 getTexParameterIuiv(Target, Pname) -> {integer(), integer(), integer(),
8045 integer()}
8046 Types:
8048 Target = enum()
8050 Pname = enum()
8051 glGetTexParameterI
8053 See external documentation.
8055 clearBufferiv(Buffer, Drawbuffer, Value) -> ok
8057 Types:
8059 Buffer = enum()
8061 Drawbuffer = integer()
8062 Value = tuple()
8063 Clear individual buffers of the currently bound draw framebuffer
8065 gl:clearBuffer* clears the specified buffer to the specified
8067 value(s). If Buffer is ?GL_COLOR, a particular draw buffer
8068 ?GL_DRAWBUFFER I is specified by passing I as DrawBuffer . In
8069 this case, Value points to a four-element vector specifying the
8070 R, G, B and A color to clear that draw buffer to. If Buffer is
8071 one of ?GL_FRONT, ?GL_BACK, ?GL_LEFT, ?GL_RIGHT, or
8072 ?GL_FRONT_AND_BACK , identifying multiple buffers, each selected
8073 buffer is cleared to the same value. Clamping and conversion for
8074 fixed-point color buffers are performed in the same fashion as
8075 gl:clearColor/4 .
8076 See external documentation.
8078 clearBufferuiv(Buffer, Drawbuffer, Value) -> ok
8080 Types:
8082 Buffer = enum()
8084 Drawbuffer = integer()
8085 Value = tuple()
8086 See clearBufferiv/3
8088 clearBufferfv(Buffer, Drawbuffer, Value) -> ok
8090 Types:
8092 Buffer = enum()
8094 Drawbuffer = integer()
8095 Value = tuple()
8096 See clearBufferiv/3
8098 clearBufferfi(Buffer, Drawbuffer, Depth, Stencil) -> ok
8100 Types:
8102 Buffer = enum()
8104 Drawbuffer = integer()
8105 Depth = float()
8106 Stencil = integer()
8107 glClearBufferfi
8109 See external documentation.
8111 getStringi(Name, Index) -> string()
8113 Types:
8115 Name = enum()
8117 Index = integer()
8118 See getString/1
8120 drawArraysInstanced(Mode, First, Count, Primcount) -> ok
8122 Types:
8124 Mode = enum()
8126 First = integer()
8127 Count = integer()
8128 Primcount = integer()
8129 glDrawArraysInstance
8131 See external documentation.
8133 drawElementsInstanced(Mode, Count, Type, Indices, Primcount) -> ok
8135 Types:
8137 Mode = enum()
8139 Count = integer()
8140 Type = enum()
8141 Indices = offset() | mem()
8142 Primcount = integer()
8143 glDrawElementsInstance
8145 See external documentation.
8147 texBuffer(Target, Internalformat, Buffer) -> ok
8149 Types:
8151 Target = enum()
8153 Internalformat = enum()
8154 Buffer = integer()
8155 Attach the storage for a buffer object to the active buffer tex‐
8157 ture
8158 gl:texBuffer attaches the storage for the buffer object named
8160 Buffer to the active buffer texture, and specifies the internal
8161 format for the texel array found in the attached buffer object.
8162 If Buffer is zero, any buffer object attached to the buffer tex‐
8163 ture is detached and no new buffer object is attached. If Buffer
8164 is non-zero, it must be the name of an existing buffer object.
8165 Target must be ?GL_TEXTURE_BUFFER . Internalformat specifies the
8166 storage format, and must be one of the following sized internal
8167 formats:
8168 See external documentation.
8170 primitiveRestartIndex(Index) -> ok
8172 Types:
8174 Index = integer()
8176 Specify the primitive restart index
8178 gl:primitiveRestartIndex specifies a vertex array element that
8180 is treated specially when primitive restarting is enabled. This
8181 is known as the primitive restart index.
8182 See external documentation.
8184 getInteger64i_v(Target, Index) -> [integer()]
8186 Types:
8188 Target = enum()
8190 Index = integer()
8191 See getBooleanv/1
8193 getBufferParameteri64v(Target, Pname) -> [integer()]
8195 Types:
8197 Target = enum()
8199 Pname = enum()
8200 glGetBufferParameteri64v
8202 See external documentation.
8204 framebufferTexture(Target, Attachment, Texture, Level) -> ok
8206 Types:
8208 Target = enum()
8210 Attachment = enum()
8211 Texture = integer()
8212 Level = integer()
8213 Attach a level of a texture object as a logical buffer to the
8215 currently bound framebuffer object
8216 gl:framebufferTexture, gl:framebufferTexture1D, gl:framebuffer‐
8218 Texture2D, and gl:framebufferTexture attach a selected mipmap
8219 level or image of a texture object as one of the logical buffers
8220 of the framebuffer object currently bound to Target . Target
8221 must be ?GL_DRAW_FRAMEBUFFER, ?GL_READ_FRAMEBUFFER, or
8222 ?GL_FRAMEBUFFER . ?GL_FRAMEBUFFER is equivalent to
8223 ?GL_DRAW_FRAMEBUFFER.
8224 See external documentation.
8226 vertexAttribDivisor(Index, Divisor) -> ok
8228 Types:
8230 Index = integer()
8232 Divisor = integer()
8233 Modify the rate at which generic vertex attributes advance dur‐
8235 ing instanced rendering
8236 gl:vertexAttribDivisor modifies the rate at which generic vertex
8238 attributes advance when rendering multiple instances of primi‐
8239 tives in a single draw call. If Divisor is zero, the attribute
8240 at slot Index advances once per vertex. If Divisor is non-zero,
8241 the attribute advances once per Divisor instances of the set(s)
8242 of vertices being rendered. An attribute is referred to as
8243 instanced if its ?GL_VERTEX_ATTRIB_ARRAY_DIVISOR value is non-
8244 zero.
8245 See external documentation.
8247 minSampleShading(Value) -> ok
8249 Types:
8251 Value = clamp()
8253 Specifies minimum rate at which sample shaing takes place
8255 gl:minSampleShading specifies the rate at which samples are
8257 shaded within a covered pixel. Sample-rate shading is enabled by
8258 calling gl:enable/1 with the parameter ?GL_SAMPLE_SHADING . If
8259 ?GL_MULTISAMPLE or ?GL_SAMPLE_SHADING is disabled, sample shad‐
8260 ing has no effect. Otherwise, an implementation must provide at
8261 least as many unique color values for each covered fragment as
8262 specified by Value times Samples where Samples is the value of
8263 ?GL_SAMPLES for the current framebuffer. At least 1 sample for
8264 each covered fragment is generated.
8265 See external documentation.
8267 blendEquationi(Buf, Mode) -> ok
8269 Types:
8271 Buf = integer()
8273 Mode = enum()
8274 See blendEquation/1
8276 blendEquationSeparatei(Buf, ModeRGB, ModeAlpha) -> ok
8278 Types:
8280 Buf = integer()
8282 ModeRGB = enum()
8283 ModeAlpha = enum()
8284 See blendEquationSeparate/2
8286 blendFunci(Buf, Src, Dst) -> ok
8288 Types:
8290 Buf = integer()
8292 Src = enum()
8293 Dst = enum()
8294 glBlendFunci
8296 See external documentation.
8298 blendFuncSeparatei(Buf, SrcRGB, DstRGB, SrcAlpha, DstAlpha) -> ok
8300 Types:
8302 Buf = integer()
8304 SrcRGB = enum()
8305 DstRGB = enum()
8306 SrcAlpha = enum()
8307 DstAlpha = enum()
8308 See blendFuncSeparate/4
8310 loadTransposeMatrixfARB(M) -> ok
8312 Types:
8314 M = matrix()
8316 glLoadTransposeMatrixARB
8318 See external documentation.
8320 loadTransposeMatrixdARB(M) -> ok
8322 Types:
8324 M = matrix()
8326 glLoadTransposeMatrixARB
8328 See external documentation.
8330 multTransposeMatrixfARB(M) -> ok
8332 Types:
8334 M = matrix()
8336 glMultTransposeMatrixARB
8338 See external documentation.
8340 multTransposeMatrixdARB(M) -> ok
8342 Types:
8344 M = matrix()
8346 glMultTransposeMatrixARB
8348 See external documentation.
8350 weightbvARB(Weights) -> ok
8352 Types:
8354 Weights = [integer()]
8356 glWeightARB
8358 See external documentation.
8360 weightsvARB(Weights) -> ok
8362 Types:
8364 Weights = [integer()]
8366 glWeightARB
8368 See external documentation.
8370 weightivARB(Weights) -> ok
8372 Types:
8374 Weights = [integer()]
8376 glWeightARB
8378 See external documentation.
8380 weightfvARB(Weights) -> ok
8382 Types:
8384 Weights = [float()]
8386 glWeightARB
8388 See external documentation.
8390 weightdvARB(Weights) -> ok
8392 Types:
8394 Weights = [float()]
8396 glWeightARB
8398 See external documentation.
8400 weightubvARB(Weights) -> ok
8402 Types:
8404 Weights = [integer()]
8406 glWeightARB
8408 See external documentation.
8410 weightusvARB(Weights) -> ok
8412 Types:
8414 Weights = [integer()]
8416 glWeightARB
8418 See external documentation.
8420 weightuivARB(Weights) -> ok
8422 Types:
8424 Weights = [integer()]
8426 glWeightARB
8428 See external documentation.
8430 vertexBlendARB(Count) -> ok
8432 Types:
8434 Count = integer()
8436 glVertexBlenARB
8438 See external documentation.
8440 currentPaletteMatrixARB(Index) -> ok
8442 Types:
8444 Index = integer()
8446 glCurrentPaletteMatrixARB
8448 See external documentation.
8450 matrixIndexubvARB(Indices) -> ok
8452 Types:
8454 Indices = [integer()]
8456 glMatrixIndexARB
8458 See external documentation.
8460 matrixIndexusvARB(Indices) -> ok
8462 Types:
8464 Indices = [integer()]
8466 glMatrixIndexARB
8468 See external documentation.
8470 matrixIndexuivARB(Indices) -> ok
8472 Types:
8474 Indices = [integer()]
8476 glMatrixIndexARB
8478 See external documentation.
8480 programStringARB(Target, Format, String) -> ok
8482 Types:
8484 Target = enum()
8486 Format = enum()
8487 String = string()
8488 glProgramStringARB
8490 See external documentation.
8492 bindProgramARB(Target, Program) -> ok
8494 Types:
8496 Target = enum()
8498 Program = integer()
8499 glBindProgramARB
8501 See external documentation.
8503 deleteProgramsARB(Programs) -> ok
8505 Types:
8507 Programs = [integer()]
8509 glDeleteProgramsARB
8511 See external documentation.
8513 genProgramsARB(N) -> [integer()]
8515 Types:
8517 N = integer()
8519 glGenProgramsARB
8521 See external documentation.
8523 programEnvParameter4dARB(Target, Index, X, Y, Z, W) -> ok
8525 Types:
8527 Target = enum()
8529 Index = integer()
8530 X = float()
8531 Y = float()
8532 Z = float()
8533 W = float()
8534 glProgramEnvParameterARB
8536 See external documentation.
8538 programEnvParameter4dvARB(Target, Index, Params) -> ok
8540 Types:
8542 Target = enum()
8544 Index = integer()
8545 Params = {float(), float(), float(), float()}
8546 glProgramEnvParameterARB
8548 See external documentation.
8550 programEnvParameter4fARB(Target, Index, X, Y, Z, W) -> ok
8552 Types:
8554 Target = enum()
8556 Index = integer()
8557 X = float()
8558 Y = float()
8559 Z = float()
8560 W = float()
8561 glProgramEnvParameterARB
8563 See external documentation.
8565 programEnvParameter4fvARB(Target, Index, Params) -> ok
8567 Types:
8569 Target = enum()
8571 Index = integer()
8572 Params = {float(), float(), float(), float()}
8573 glProgramEnvParameterARB
8575 See external documentation.
8577 programLocalParameter4dARB(Target, Index, X, Y, Z, W) -> ok
8579 Types:
8581 Target = enum()
8583 Index = integer()
8584 X = float()
8585 Y = float()
8586 Z = float()
8587 W = float()
8588 glProgramLocalParameterARB
8590 See external documentation.
8592 programLocalParameter4dvARB(Target, Index, Params) -> ok
8594 Types:
8596 Target = enum()
8598 Index = integer()
8599 Params = {float(), float(), float(), float()}
8600 glProgramLocalParameterARB
8602 See external documentation.
8604 programLocalParameter4fARB(Target, Index, X, Y, Z, W) -> ok
8606 Types:
8608 Target = enum()
8610 Index = integer()
8611 X = float()
8612 Y = float()
8613 Z = float()
8614 W = float()
8615 glProgramLocalParameterARB
8617 See external documentation.
8619 programLocalParameter4fvARB(Target, Index, Params) -> ok
8621 Types:
8623 Target = enum()
8625 Index = integer()
8626 Params = {float(), float(), float(), float()}
8627 glProgramLocalParameterARB
8629 See external documentation.
8631 getProgramEnvParameterdvARB(Target, Index) -> {float(), float(),
8633 float(), float()}
8634 Types:
8636 Target = enum()
8638 Index = integer()
8639 glGetProgramEnvParameterARB
8641 See external documentation.
8643 getProgramEnvParameterfvARB(Target, Index) -> {float(), float(),
8645 float(), float()}
8646 Types:
8648 Target = enum()
8650 Index = integer()
8651 glGetProgramEnvParameterARB
8653 See external documentation.
8655 getProgramLocalParameterdvARB(Target, Index) -> {float(), float(),
8657 float(), float()}
8658 Types:
8660 Target = enum()
8662 Index = integer()
8663 glGetProgramLocalParameterARB
8665 See external documentation.
8667 getProgramLocalParameterfvARB(Target, Index) -> {float(), float(),
8669 float(), float()}
8670 Types:
8672 Target = enum()
8674 Index = integer()
8675 glGetProgramLocalParameterARB
8677 See external documentation.
8679 getProgramStringARB(Target, Pname, String) -> ok
8681 Types:
8683 Target = enum()
8685 Pname = enum()
8686 String = mem()
8687 glGetProgramStringARB
8689 See external documentation.
8691 getBufferParameterivARB(Target, Pname) -> [integer()]
8693 Types:
8695 Target = enum()
8697 Pname = enum()
8698 glGetBufferParameterARB
8700 See external documentation.
8702 deleteObjectARB(Obj) -> ok
8704 Types:
8706 Obj = integer()
8708 glDeleteObjectARB
8710 See external documentation.
8712 getHandleARB(Pname) -> integer()
8714 Types:
8716 Pname = enum()
8718 glGetHandleARB
8720 See external documentation.
8722 detachObjectARB(ContainerObj, AttachedObj) -> ok
8724 Types:
8726 ContainerObj = integer()
8728 AttachedObj = integer()
8729 glDetachObjectARB
8731 See external documentation.
8733 createShaderObjectARB(ShaderType) -> integer()
8735 Types:
8737 ShaderType = enum()
8739 glCreateShaderObjectARB
8741 See external documentation.
8743 shaderSourceARB(ShaderObj, String) -> ok
8745 Types:
8747 ShaderObj = integer()
8749 String = iolist()
8750 glShaderSourceARB
8752 See external documentation.
8754 compileShaderARB(ShaderObj) -> ok
8756 Types:
8758 ShaderObj = integer()
8760 glCompileShaderARB
8762 See external documentation.
8764 createProgramObjectARB() -> integer()
8766 glCreateProgramObjectARB
8768 See external documentation.
8770 attachObjectARB(ContainerObj, Obj) -> ok
8772 Types:
8774 ContainerObj = integer()
8776 Obj = integer()
8777 glAttachObjectARB
8779 See external documentation.
8781 linkProgramARB(ProgramObj) -> ok
8783 Types:
8785 ProgramObj = integer()
8787 glLinkProgramARB
8789 See external documentation.
8791 useProgramObjectARB(ProgramObj) -> ok
8793 Types:
8795 ProgramObj = integer()
8797 glUseProgramObjectARB
8799 See external documentation.
8801 validateProgramARB(ProgramObj) -> ok
8803 Types:
8805 ProgramObj = integer()
8807 glValidateProgramARB
8809 See external documentation.
8811 getObjectParameterfvARB(Obj, Pname) -> float()
8813 Types:
8815 Obj = integer()
8817 Pname = enum()
8818 glGetObjectParameterARB
8820 See external documentation.
8822 getObjectParameterivARB(Obj, Pname) -> integer()
8824 Types:
8826 Obj = integer()
8828 Pname = enum()
8829 glGetObjectParameterARB
8831 See external documentation.
8833 getInfoLogARB(Obj, MaxLength) -> string()
8835 Types:
8837 Obj = integer()
8839 MaxLength = integer()
8840 glGetInfoLogARB
8842 See external documentation.
8844 getAttachedObjectsARB(ContainerObj, MaxCount) -> [integer()]
8846 Types:
8848 ContainerObj = integer()
8850 MaxCount = integer()
8851 glGetAttachedObjectsARB
8853 See external documentation.
8855 getUniformLocationARB(ProgramObj, Name) -> integer()
8857 Types:
8859 ProgramObj = integer()
8861 Name = string()
8862 glGetUniformLocationARB
8864 See external documentation.
8866 getActiveUniformARB(ProgramObj, Index, MaxLength) -> {Size::integer(),
8868 Type::enum(), Name::string()}
8869 Types:
8871 ProgramObj = integer()
8873 Index = integer()
8874 MaxLength = integer()
8875 glGetActiveUniformARB
8877 See external documentation.
8879 getUniformfvARB(ProgramObj, Location) -> matrix()
8881 Types:
8883 ProgramObj = integer()
8885 Location = integer()
8886 glGetUniformARB
8888 See external documentation.
8890 getUniformivARB(ProgramObj, Location) -> {integer(), integer(), inte‐
8892 ger(), integer(), integer(), integer(), integer(), integer(), inte‐
8893 ger(), integer(), integer(), integer(), integer(), integer(), inte‐
8894 ger(), integer()}
8895 Types:
8897 ProgramObj = integer()
8899 Location = integer()
8900 glGetUniformARB
8902 See external documentation.
8904 getShaderSourceARB(Obj, MaxLength) -> string()
8906 Types:
8908 Obj = integer()
8910 MaxLength = integer()
8911 glGetShaderSourceARB
8913 See external documentation.
8915 bindAttribLocationARB(ProgramObj, Index, Name) -> ok
8917 Types:
8919 ProgramObj = integer()
8921 Index = integer()
8922 Name = string()
8923 glBindAttribLocationARB
8925 See external documentation.
8927 getActiveAttribARB(ProgramObj, Index, MaxLength) -> {Size::integer(),
8929 Type::enum(), Name::string()}
8930 Types:
8932 ProgramObj = integer()
8934 Index = integer()
8935 MaxLength = integer()
8936 glGetActiveAttribARB
8938 See external documentation.
8940 getAttribLocationARB(ProgramObj, Name) -> integer()
8942 Types:
8944 ProgramObj = integer()
8946 Name = string()
8947 glGetAttribLocationARB
8949 See external documentation.
8951 isRenderbuffer(Renderbuffer) -> 0 | 1
8953 Types:
8955 Renderbuffer = integer()
8957 Determine if a name corresponds to a renderbuffer object
8959 gl:isRenderbuffer returns ?GL_TRUE if Renderbuffer is currently
8961 the name of a renderbuffer object. If Renderbuffer is zero, or
8962 if Renderbuffer is not the name of a renderbuffer object, or if
8963 an error occurs, gl:isRenderbuffer returns ?GL_FALSE. If Render‐
8964 buffer is a name returned by gl:genRenderbuffers/1 , by that has
8965 not yet been bound through a call to gl:bindRenderbuffer/2 or
8966 gl:framebufferRenderbuffer/4 , then the name is not a render‐
8967 buffer object and gl:isRenderbuffer returns ?GL_FALSE .
8968 See external documentation.
8970 bindRenderbuffer(Target, Renderbuffer) -> ok
8972 Types:
8974 Target = enum()
8976 Renderbuffer = integer()
8977 Bind a renderbuffer to a renderbuffer target
8979 gl:bindRenderbuffer binds the renderbuffer object with name Ren‐
8981 derbuffer to the renderbuffer target specified by Target . Tar‐
8982 get must be ?GL_RENDERBUFFER . Renderbuffer is the name of a
8983 renderbuffer object previously returned from a call to gl:gen‐
8984 Renderbuffers/1 , or zero to break the existing binding of a
8985 renderbuffer object to Target .
8986 See external documentation.
8988 deleteRenderbuffers(Renderbuffers) -> ok
8990 Types:
8992 Renderbuffers = [integer()]
8994 Delete renderbuffer objects
8996 gl:deleteRenderbuffers deletes the N renderbuffer objects whose
8998 names are stored in the array addressed by Renderbuffers . The
8999 name zero is reserved by the GL and is silently ignored, should
9000 it occur in Renderbuffers , as are other unused names. Once a
9001 renderbuffer object is deleted, its name is again unused and it
9002 has no contents. If a renderbuffer that is currently bound to
9003 the target ?GL_RENDERBUFFER is deleted, it is as though gl:bin‐
9004 dRenderbuffer/2 had been executed with a Target of ?GL_RENDER‐
9005 BUFFER and a Name of zero.
9006 See external documentation.
9008 genRenderbuffers(N) -> [integer()]
9010 Types:
9012 N = integer()
9014 Generate renderbuffer object names
9016 gl:genRenderbuffers returns N renderbuffer object names in Ren‐
9018 derbuffers . There is no guarantee that the names form a con‐
9019 tiguous set of integers; however, it is guaranteed that none of
9020 the returned names was in use immediately before the call to
9021 gl:genRenderbuffers .
9022 See external documentation.
9024 renderbufferStorage(Target, Internalformat, Width, Height) -> ok
9026 Types:
9028 Target = enum()
9030 Internalformat = enum()
9031 Width = integer()
9032 Height = integer()
9033 Establish data storage, format and dimensions of a renderbuffer
9035 object's image
9036 gl:renderbufferStorage is equivalent to calling gl:renderbuffer‐
9038 StorageMultisample/5 with the Samples set to zero.
9039 See external documentation.
9041 getRenderbufferParameteriv(Target, Pname) -> integer()
9043 Types:
9045 Target = enum()
9047 Pname = enum()
9048 Retrieve information about a bound renderbuffer object
9050 gl:getRenderbufferParameteriv retrieves information about a
9052 bound renderbuffer object. Target specifies the target of the
9053 query operation and must be ?GL_RENDERBUFFER . Pname specifies
9054 the parameter whose value to query and must be one of ?GL_REN‐
9055 DERBUFFER_WIDTH , ?GL_RENDERBUFFER_HEIGHT, ?GL_RENDER‐
9056 BUFFER_INTERNAL_FORMAT, ?GL_RENDERBUFFER_RED_SIZE , ?GL_RENDER‐
9057 BUFFER_GREEN_SIZE, ?GL_RENDERBUFFER_BLUE_SIZE, ?GL_RENDER‐
9058 BUFFER_ALPHA_SIZE , ?GL_RENDERBUFFER_DEPTH_SIZE, ?GL_RENDER‐
9059 BUFFER_DEPTH_SIZE, ?GL_RENDERBUFFER_STENCIL_SIZE , or ?GL_REN‐
9060 DERBUFFER_SAMPLES.
9061 See external documentation.
9063 isFramebuffer(Framebuffer) -> 0 | 1
9065 Types:
9067 Framebuffer = integer()
9069 Determine if a name corresponds to a framebuffer object
9071 gl:isFramebuffer returns ?GL_TRUE if Framebuffer is currently
9073 the name of a framebuffer object. If Framebuffer is zero, or if
9074 ?framebuffer is not the name of a framebuffer object, or if an
9075 error occurs, gl:isFramebuffer returns ?GL_FALSE. If Framebuffer
9076 is a name returned by gl:genFramebuffers/1 , by that has not yet
9077 been bound through a call to gl:bindFramebuffer/2 , then the
9078 name is not a framebuffer object and gl:isFramebuffer returns
9079 ?GL_FALSE.
9080 See external documentation.
9082 bindFramebuffer(Target, Framebuffer) -> ok
9084 Types:
9086 Target = enum()
9088 Framebuffer = integer()
9089 Bind a framebuffer to a framebuffer target
9091 gl:bindFramebuffer binds the framebuffer object with name Frame‐
9093 buffer to the framebuffer target specified by Target . Target
9094 must be either ?GL_DRAW_FRAMEBUFFER , ?GL_READ_FRAMEBUFFER or
9095 ?GL_FRAMEBUFFER. If a framebuffer object is bound to
9096 ?GL_DRAW_FRAMEBUFFER or ?GL_READ_FRAMEBUFFER, it becomes the
9097 target for rendering or readback operations, respectively, until
9098 it is deleted or another framebuffer is bound to the correspond‐
9099 ing bind point. Calling gl:bindFramebuffer with Target set to
9100 ?GL_FRAMEBUFFER binds Framebuffer to both the read and draw
9101 framebuffer targets. Framebuffer is the name of a framebuffer
9102 object previously returned from a call to gl:genFramebuffers/1 ,
9103 or zero to break the existing binding of a framebuffer object to
9104 Target .
9105 See external documentation.
9107 deleteFramebuffers(Framebuffers) -> ok
9109 Types:
9111 Framebuffers = [integer()]
9113 Delete framebuffer objects
9115 gl:deleteFramebuffers deletes the N framebuffer objects whose
9117 names are stored in the array addressed by Framebuffers . The
9118 name zero is reserved by the GL and is silently ignored, should
9119 it occur in Framebuffers , as are other unused names. Once a
9120 framebuffer object is deleted, its name is again unused and it
9121 has no attachments. If a framebuffer that is currently bound to
9122 one or more of the targets ?GL_DRAW_FRAMEBUFFER or
9123 ?GL_READ_FRAMEBUFFER is deleted, it is as though gl:bindFrame‐
9124 buffer/2 had been executed with the corresponding Target and
9125 Framebuffer zero.
9126 See external documentation.
9128 genFramebuffers(N) -> [integer()]
9130 Types:
9132 N = integer()
9134 Generate framebuffer object names
9136 gl:genFramebuffers returns N framebuffer object names in Ids .
9138 There is no guarantee that the names form a contiguous set of
9139 integers; however, it is guaranteed that none of the returned
9140 names was in use immediately before the call to gl:genFrame‐
9141 buffers .
9142 See external documentation.
9144 checkFramebufferStatus(Target) -> enum()
9146 Types:
9148 Target = enum()
9150 Check the completeness status of a framebuffer
9152 gl:checkFramebufferStatus queries the completeness status of the
9154 framebuffer object currently bound to Target . Target must be
9155 ?GL_DRAW_FRAMEBUFFER, ?GL_READ_FRAMEBUFFER or ?GL_FRAMEBUFFER.
9156 ?GL_FRAMEBUFFER is equivalent to ?GL_DRAW_FRAMEBUFFER .
9157 See external documentation.
9159 framebufferTexture1D(Target, Attachment, Textarget, Texture, Level) ->
9161 ok
9162 Types:
9164 Target = enum()
9166 Attachment = enum()
9167 Textarget = enum()
9168 Texture = integer()
9169 Level = integer()
9170 See framebufferTexture/4
9172 framebufferTexture2D(Target, Attachment, Textarget, Texture, Level) ->
9174 ok
9175 Types:
9177 Target = enum()
9179 Attachment = enum()
9180 Textarget = enum()
9181 Texture = integer()
9182 Level = integer()
9183 See framebufferTexture/4
9185 framebufferTexture3D(Target, Attachment, Textarget, Texture, Level,
9187 Zoffset) -> ok
9188 Types:
9190 Target = enum()
9192 Attachment = enum()
9193 Textarget = enum()
9194 Texture = integer()
9195 Level = integer()
9196 Zoffset = integer()
9197 See framebufferTexture/4
9199 framebufferRenderbuffer(Target, Attachment, Renderbuffertarget, Render‐
9201 buffer) -> ok
9202 Types:
9204 Target = enum()
9206 Attachment = enum()
9207 Renderbuffertarget = enum()
9208 Renderbuffer = integer()
9209 Attach a renderbuffer as a logical buffer to the currently bound
9211 framebuffer object
9212 gl:framebufferRenderbuffer attaches a renderbuffer as one of the
9214 logical buffers of the currently bound framebuffer object. Ren‐
9215 derbuffer is the name of the renderbuffer object to attach and
9216 must be either zero, or the name of an existing renderbuffer
9217 object of type Renderbuffertarget . If Renderbuffer is not zero
9218 and if gl:framebufferRenderbuffer is successful, then the ren‐
9219 derbuffer name Renderbuffer will be used as the logical buffer
9220 identified by Attachment of the framebuffer currently bound to
9221 Target .
9222 See external documentation.
9224 getFramebufferAttachmentParameteriv(Target, Attachment, Pname) -> inte‐
9226 ger()
9227 Types:
9229 Target = enum()
9231 Attachment = enum()
9232 Pname = enum()
9233 Retrieve information about attachments of a bound framebuffer
9235 object
9236 gl:getFramebufferAttachmentParameter returns information about
9238 attachments of a bound framebuffer object. Target specifies the
9239 framebuffer binding point and must be ?GL_DRAW_FRAMEBUFFER,
9240 ?GL_READ_FRAMEBUFFER or ?GL_FRAMEBUFFER. ?GL_FRAMEBUFFER is
9241 equivalent to ?GL_DRAW_FRAMEBUFFER.
9242 See external documentation.
9244 generateMipmap(Target) -> ok
9246 Types:
9248 Target = enum()
9250 Generate mipmaps for a specified texture target
9252 gl:generateMipmap generates mipmaps for the texture attached to
9254 Target of the active texture unit. For cube map textures, a
9255 ?GL_INVALID_OPERATION error is generated if the texture attached
9256 to Target is not cube complete.
9257 See external documentation.
9259 blitFramebuffer(SrcX0, SrcY0, SrcX1, SrcY1, DstX0, DstY0, DstX1, DstY1,
9261 Mask, Filter) -> ok
9262 Types:
9264 SrcX0 = integer()
9266 SrcY0 = integer()
9267 SrcX1 = integer()
9268 SrcY1 = integer()
9269 DstX0 = integer()
9270 DstY0 = integer()
9271 DstX1 = integer()
9272 DstY1 = integer()
9273 Mask = integer()
9274 Filter = enum()
9275 Copy a block of pixels from the read framebuffer to the draw
9277 framebuffer
9278 gl:blitFramebuffer transfers a rectangle of pixel values from
9280 one region of the read framebuffer to another region in the draw
9281 framebuffer. Mask is the bitwise OR of a number of values indi‐
9282 cating which buffers are to be copied. The values are
9283 ?GL_COLOR_BUFFER_BIT , ?GL_DEPTH_BUFFER_BIT, and ?GL_STEN‐
9284 CIL_BUFFER_BIT. The pixels corresponding to these buffers are
9285 copied from the source rectangle bounded by the locations (
9286 SrcX0 ; SrcY0 ) and ( SrcX1 ; SrcY1 ) to the destination rectan‐
9287 gle bounded by the locations ( DstX0 ; DstY0 ) and ( DstX1 ;
9288 DstY1 ). The lower bounds of the rectangle are inclusive, while
9289 the upper bounds are exclusive.
9290 See external documentation.
9292 renderbufferStorageMultisample(Target, Samples, Internalformat, Width,
9294 Height) -> ok
9295 Types:
9297 Target = enum()
9299 Samples = integer()
9300 Internalformat = enum()
9301 Width = integer()
9302 Height = integer()
9303 Establish data storage, format, dimensions and sample count of a
9305 renderbuffer object's image
9306 gl:renderbufferStorageMultisample establishes the data storage,
9308 format, dimensions and number of samples of a renderbuffer
9309 object's image.
9310 See external documentation.
9312 framebufferTextureLayer(Target, Attachment, Texture, Level, Layer) ->
9314 ok
9315 Types:
9317 Target = enum()
9319 Attachment = enum()
9320 Texture = integer()
9321 Level = integer()
9322 Layer = integer()
9323 See framebufferTexture/4
9325 framebufferTextureFaceARB(Target, Attachment, Texture, Level, Face) ->
9327 ok
9328 Types:
9330 Target = enum()
9332 Attachment = enum()
9333 Texture = integer()
9334 Level = integer()
9335 Face = enum()
9336 See framebufferTexture/4
9338 flushMappedBufferRange(Target, Offset, Length) -> ok
9340 Types:
9342 Target = enum()
9344 Offset = integer()
9345 Length = integer()
9346 Indicate modifications to a range of a mapped buffer
9348 gl:flushMappedBufferRange indicates that modifications have been
9350 made to a range of a mapped buffer. The buffer must previously
9351 have been mapped with the ?GL_MAP_FLUSH_EXPLICIT flag. Offset
9352 and Length indicate the modified subrange of the mapping, in
9353 basic units. The specified subrange to flush is relative to the
9354 start of the currently mapped range of the buffer.
9355 gl:flushMappedBufferRange may be called multiple times to indi‐
9356 cate distinct subranges of the mapping which require flushing.
9357 See external documentation.
9359 bindVertexArray(Array) -> ok
9361 Types:
9363 Array = integer()
9365 Bind a vertex array object
9367 gl:bindVertexArray binds the vertex array object with name Array
9369 . Array is the name of a vertex array object previously returned
9370 from a call to gl:genVertexArrays/1 , or zero to break the
9371 existing vertex array object binding.
9372 See external documentation.
9374 deleteVertexArrays(Arrays) -> ok
9376 Types:
9378 Arrays = [integer()]
9380 Delete vertex array objects
9382 gl:deleteVertexArrays deletes N vertex array objects whose names
9384 are stored in the array addressed by Arrays . Once a vertex
9385 array object is deleted it has no contents and its name is again
9386 unused. If a vertex array object that is currently bound is
9387 deleted, the binding for that object reverts to zero and the
9388 default vertex array becomes current. Unused names in Arrays are
9389 silently ignored, as is the value zero.
9390 See external documentation.
9392 genVertexArrays(N) -> [integer()]
9394 Types:
9396 N = integer()
9398 Generate vertex array object names
9400 gl:genVertexArrays returns N vertex array object names in Arrays
9402 . There is no guarantee that the names form a contiguous set of
9403 integers; however, it is guaranteed that none of the returned
9404 names was in use immediately before the call to gl:genVertexAr‐
9405 rays .
9406 See external documentation.
9408 isVertexArray(Array) -> 0 | 1
9410 Types:
9412 Array = integer()
9414 Determine if a name corresponds to a vertex array object
9416 gl:isVertexArray returns ?GL_TRUE if Array is currently the name
9418 of a renderbuffer object. If Renderbuffer is zero, or if Array
9419 is not the name of a renderbuffer object, or if an error occurs,
9420 gl:isVertexArray returns ?GL_FALSE . If Array is a name returned
9421 by gl:genVertexArrays/1 , by that has not yet been bound through
9422 a call to gl:bindVertexArray/1 , then the name is not a vertex
9423 array object and gl:isVertexArray returns ?GL_FALSE.
9424 See external documentation.
9426 getUniformIndices(Program, UniformNames) -> [integer()]
9428 Types:
9430 Program = integer()
9432 UniformNames = iolist()
9433 Retrieve the index of a named uniform block
9435 gl:getUniformIndices retrieves the indices of a number of uni‐
9437 forms within Program .
9438 See external documentation.
9440 getActiveUniformsiv(Program, UniformIndices, Pname) -> [integer()]
9442 Types:
9444 Program = integer()
9446 UniformIndices = [integer()]
9447 Pname = enum()
9448 glGetActiveUniforms
9450 See external documentation.
9452 getActiveUniformName(Program, UniformIndex, BufSize) -> string()
9454 Types:
9456 Program = integer()
9458 UniformIndex = integer()
9459 BufSize = integer()
9460 Query the name of an active uniform
9462 gl:getActiveUniformName returns the name of the active uniform
9464 at UniformIndex within Program . If UniformName is not NULL, up
9465 to BufSize characters (including a nul-terminator) will be writ‐
9466 ten into the array whose address is specified by UniformName .
9467 If Length is not NULL, the number of characters that were (or
9468 would have been) written into UniformName (not including the
9469 nul-terminator) will be placed in the variable whose address is
9470 specified in Length . If Length is NULL, no length is returned.
9471 The length of the longest uniform name in Program is given by
9472 the value of ?GL_ACTIVE_UNIFORM_MAX_LENGTH, which can be queried
9473 with gl:getProgramiv/2 .
9474 See external documentation.
9476 getUniformBlockIndex(Program, UniformBlockName) -> integer()
9478 Types:
9480 Program = integer()
9482 UniformBlockName = string()
9483 Retrieve the index of a named uniform block
9485 gl:getUniformBlockIndex retrieves the index of a uniform block
9487 within Program .
9488 See external documentation.
9490 getActiveUniformBlockiv(Program, UniformBlockIndex, Pname, Params) ->
9492 ok
9493 Types:
9495 Program = integer()
9497 UniformBlockIndex = integer()
9498 Pname = enum()
9499 Params = mem()
9500 Query information about an active uniform block
9502 gl:getActiveUniformBlockiv retrieves information about an active
9504 uniform block within Program .
9505 See external documentation.
9507 getActiveUniformBlockName(Program, UniformBlockIndex, BufSize) ->
9509 string()
9510 Types:
9512 Program = integer()
9514 UniformBlockIndex = integer()
9515 BufSize = integer()
9516 Retrieve the name of an active uniform block
9518 gl:getActiveUniformBlockName retrieves the name of the active
9520 uniform block at UniformBlockIndex within Program .
9521 See external documentation.
9523 uniformBlockBinding(Program, UniformBlockIndex, UniformBlockBinding) ->
9525 ok
9526 Types:
9528 Program = integer()
9530 UniformBlockIndex = integer()
9531 UniformBlockBinding = integer()
9532 Assign a binding point to an active uniform block
9534 Binding points for active uniform blocks are assigned using
9536 gl:uniformBlockBinding. Each of a program's active uniform
9537 blocks has a corresponding uniform buffer binding point. Program
9538 is the name of a program object for which the command
9539 gl:linkProgram/1 has been issued in the past.
9540 See external documentation.
9542 copyBufferSubData(ReadTarget, WriteTarget, ReadOffset, WriteOffset,
9544 Size) -> ok
9545 Types:
9547 ReadTarget = enum()
9549 WriteTarget = enum()
9550 ReadOffset = integer()
9551 WriteOffset = integer()
9552 Size = integer()
9553 Copy part of the data store of a buffer object to the data store
9555 of another buffer object
9556 gl:copyBufferSubData copies part of the data store attached to
9558 Readtarget to the data store attached to Writetarget . The num‐
9559 ber of basic machine units indicated by Size is copied from the
9560 source, at offset Readoffset to the destination at Writeoffset ,
9561 also in basic machine units.
9562 See external documentation.
9564 drawElementsBaseVertex(Mode, Count, Type, Indices, Basevertex) -> ok
9566 Types:
9568 Mode = enum()
9570 Count = integer()
9571 Type = enum()
9572 Indices = offset() | mem()
9573 Basevertex = integer()
9574 Render primitives from array data with a per-element offset
9576 gl:drawElementsBaseVertex behaves identically to gl:drawEle‐
9578 ments/4 except that the ith element transferred by the corre‐
9579 sponding draw call will be taken from element Indices [i] +
9580 Basevertex of each enabled array. If the resulting value is
9581 larger than the maximum value representable by Type , it is as
9582 if the calculation were upconverted to 32-bit unsigned integers
9583 (with wrapping on overflow conditions). The operation is unde‐
9584 fined if the sum would be negative.
9585 See external documentation.
9587 drawRangeElementsBaseVertex(Mode, Start, End, Count, Type, Indices,
9589 Basevertex) -> ok
9590 Types:
9592 Mode = enum()
9594 Start = integer()
9595 End = integer()
9596 Count = integer()
9597 Type = enum()
9598 Indices = offset() | mem()
9599 Basevertex = integer()
9600 Render primitives from array data with a per-element offset
9602 gl:drawRangeElementsBaseVertex is a restricted form of
9604 gl:drawElementsBaseVertex/5 . Mode , Start , End , Count and
9605 Basevertex match the corresponding arguments to gl:drawElements‐
9606 BaseVertex/5 , with the additional constraint that all values in
9607 the array Indices must lie between Start and End , inclusive,
9608 prior to adding Basevertex . Index values lying outside the
9609 range [ Start , End ] are treated in the same way as gl:drawEle‐
9610 mentsBaseVertex/5 . The i th element transferred by the corre‐
9611 sponding draw call will be taken from element Indices [i] +
9612 Basevertex of each enabled array. If the resulting value is
9613 larger than the maximum value representable by Type , it is as
9614 if the calculation were upconverted to 32-bit unsigned integers
9615 (with wrapping on overflow conditions). The operation is unde‐
9616 fined if the sum would be negative.
9617 See external documentation.
9619 drawElementsInstancedBaseVertex(Mode, Count, Type, Indices, Primcount,
9621 Basevertex) -> ok
9622 Types:
9624 Mode = enum()
9626 Count = integer()
9627 Type = enum()
9628 Indices = offset() | mem()
9629 Primcount = integer()
9630 Basevertex = integer()
9631 Render multiple instances of a set of primitives from array data
9633 with a per-element offset
9634 gl:drawElementsInstancedBaseVertex behaves identically to
9636 gl:drawElementsInstanced/5 except that the ith element trans‐
9637 ferred by the corresponding draw call will be taken from element
9638 Indices [i] + Basevertex of each enabled array. If the resulting
9639 value is larger than the maximum value representable by Type ,
9640 it is as if the calculation were upconverted to 32-bit unsigned
9641 integers (with wrapping on overflow conditions). The operation
9642 is undefined if the sum would be negative.
9643 See external documentation.
9645 provokingVertex(Mode) -> ok
9647 Types:
9649 Mode = enum()
9651 Specifiy the vertex to be used as the source of data for flat
9653 shaded varyings
9654 Flatshading a vertex shader varying output means to assign all
9656 vetices of the primitive the same value for that output. The
9657 vertex from which these values is derived is known as the pro‐
9658 voking vertex and gl:provokingVertex specifies which vertex is
9659 to be used as the source of data for flat shaded varyings.
9660 See external documentation.
9662 fenceSync(Condition, Flags) -> integer()
9664 Types:
9666 Condition = enum()
9668 Flags = integer()
9669 Create a new sync object and insert it into the GL command
9671 stream
9672 gl:fenceSync creates a new fence sync object, inserts a fence
9674 command into the GL command stream and associates it with that
9675 sync object, and returns a non-zero name corresponding to the
9676 sync object.
9677 See external documentation.
9679 isSync(Sync) -> 0 | 1
9681 Types:
9683 Sync = integer()
9685 Determine if a name corresponds to a sync object
9687 gl:isSync returns ?GL_TRUE if Sync is currently the name of a
9689 sync object. If Sync is not the name of a sync object, or if an
9690 error occurs, gl:isSync returns ?GL_FALSE. Note that zero is not
9691 the name of a sync object.
9692 See external documentation.
9694 deleteSync(Sync) -> ok
9696 Types:
9698 Sync = integer()
9700 Delete a sync object
9702 gl:deleteSync deletes the sync object specified by Sync . If the
9704 fence command corresponding to the specified sync object has
9705 completed, or if no gl:waitSync/3 or gl:clientWaitSync/3 com‐
9706 mands are blocking on Sync , the object is deleted immediately.
9707 Otherwise, Sync is flagged for deletion and will be deleted when
9708 it is no longer associated with any fence command and is no
9709 longer blocking any gl:waitSync/3 or gl:clientWaitSync/3 com‐
9710 mand. In either case, after gl:deleteSync returns, the name Sync
9711 is invalid and can no longer be used to refer to the sync
9712 object.
9713 See external documentation.
9715 clientWaitSync(Sync, Flags, Timeout) -> enum()
9717 Types:
9719 Sync = integer()
9721 Flags = integer()
9722 Timeout = integer()
9723 Block and wait for a sync object to become signaled
9725 gl:clientWaitSync causes the client to block and wait for the
9727 sync object specified by Sync to become signaled. If Sync is
9728 signaled when gl:clientWaitSync is called, gl:clientWaitSync
9729 returns immediately, otherwise it will block and wait for up to
9730 Timeout nanoseconds for Sync to become signaled.
9731 See external documentation.
9733 waitSync(Sync, Flags, Timeout) -> ok
9735 Types:
9737 Sync = integer()
9739 Flags = integer()
9740 Timeout = integer()
9741 Instruct the GL server to block until the specified sync object
9743 becomes signaled
9744 gl:waitSync causes the GL server to block and wait until Sync
9746 becomes signaled. Sync is the name of an existing sync object
9747 upon which to wait. Flags and Timeout are currently not used and
9748 must be set to zero and the special value ?GL_TIMEOUT_IGNORED ,
9749 respectively
9750 Flags and Timeout are placeholders for anticipated future exten‐
9752 sions of sync object capabilities. They must have these reserved
9753 values in order that existing code calling gl:waitSync operate
9754 properly in the presence of such extensions.
9755 See external documentation.
9757 getInteger64v(Pname) -> [integer()]
9759 Types:
9761 Pname = enum()
9763 See getBooleanv/1
9765 getSynciv(Sync, Pname, BufSize) -> [integer()]
9767 Types:
9769 Sync = integer()
9771 Pname = enum()
9772 BufSize = integer()
9773 Query the properties of a sync object
9775 gl:getSynciv retrieves properties of a sync object. Sync speci‐
9777 fies the name of the sync object whose properties to retrieve.
9778 See external documentation.
9780 texImage2DMultisample(Target, Samples, Internalformat, Width, Height,
9782 Fixedsamplelocations) -> ok
9783 Types:
9785 Target = enum()
9787 Samples = integer()
9788 Internalformat = integer()
9789 Width = integer()
9790 Height = integer()
9791 Fixedsamplelocations = 0 | 1
9792 Establish the data storage, format, dimensions, and number of
9794 samples of a multisample texture's image
9795 gl:texImage2DMultisample establishes the data storage, format,
9797 dimensions and number of samples of a multisample texture's
9798 image.
9799 See external documentation.
9801 texImage3DMultisample(Target, Samples, Internalformat, Width, Height,
9803 Depth, Fixedsamplelocations) -> ok
9804 Types:
9806 Target = enum()
9808 Samples = integer()
9809 Internalformat = integer()
9810 Width = integer()
9811 Height = integer()
9812 Depth = integer()
9813 Fixedsamplelocations = 0 | 1
9814 Establish the data storage, format, dimensions, and number of
9816 samples of a multisample texture's image
9817 gl:texImage3DMultisample establishes the data storage, format,
9819 dimensions and number of samples of a multisample texture's
9820 image.
9821 See external documentation.
9823 getMultisamplefv(Pname, Index) -> {float(), float()}
9825 Types:
9827 Pname = enum()
9829 Index = integer()
9830 Retrieve the location of a sample
9832 gl:getMultisamplefv queries the location of a given sample.
9834 Pname specifies the sample parameter to retrieve and must be
9835 ?GL_SAMPLE_POSITION. Index corresponds to the sample for which
9836 the location should be returned. The sample location is returned
9837 as two floating-point values in Val[0] and Val[1] , each between
9838 0 and 1, corresponding to the X and Y locations respectively in
9839 the GL pixel space of that sample. (0.5, 0.5) this corresponds
9840 to the pixel center. Index must be between zero and the value of
9841 ?GL_SAMPLES - 1.
9842 See external documentation.
9844 sampleMaski(Index, Mask) -> ok
9846 Types:
9848 Index = integer()
9850 Mask = integer()
9851 Set the value of a sub-word of the sample mask
9853 gl:sampleMaski sets one 32-bit sub-word of the multi-word sample
9855 mask, ?GL_SAMPLE_MASK_VALUE .
9856 See external documentation.
9858 namedStringARB(Type, Name, String) -> ok
9860 Types:
9862 Type = enum()
9864 Name = string()
9865 String = string()
9866 glNamedStringARB
9868 See external documentation.
9870 deleteNamedStringARB(Name) -> ok
9872 Types:
9874 Name = string()
9876 glDeleteNamedStringARB
9878 See external documentation.
9880 compileShaderIncludeARB(Shader, Path) -> ok
9882 Types:
9884 Shader = integer()
9886 Path = iolist()
9887 glCompileShaderIncludeARB
9889 See external documentation.
9891 isNamedStringARB(Name) -> 0 | 1
9893 Types:
9895 Name = string()
9897 glIsNamedStringARB
9899 See external documentation.
9901 getNamedStringARB(Name, BufSize) -> string()
9903 Types:
9905 Name = string()
9907 BufSize = integer()
9908 glGetNamedStringARB
9910 See external documentation.
9912 getNamedStringivARB(Name, Pname) -> integer()
9914 Types:
9916 Name = string()
9918 Pname = enum()
9919 glGetNamedStringARB
9921 See external documentation.
9923 bindFragDataLocationIndexed(Program, ColorNumber, Index, Name) -> ok
9925 Types:
9927 Program = integer()
9929 ColorNumber = integer()
9930 Index = integer()
9931 Name = string()
9932 glBindFragDataLocationIndexe
9934 See external documentation.
9936 getFragDataIndex(Program, Name) -> integer()
9938 Types:
9940 Program = integer()
9942 Name = string()
9943 Query the bindings of color indices to user-defined varying out
9945 variables
9946 gl:getFragDataIndex returns the index of the fragment color to
9948 which the variable Name was bound when the program object Pro‐
9949 gram was last linked. If Name is not a varying out variable of
9950 Program , or if an error occurs, -1 will be returned.
9951 See external documentation.
9953 genSamplers(Count) -> [integer()]
9955 Types:
9957 Count = integer()
9959 Generate sampler object names
9961 gl:genSamplers returns N sampler object names in Samplers .
9963 There is no guarantee that the names form a contiguous set of
9964 integers; however, it is guaranteed that none of the returned
9965 names was in use immediately before the call to gl:genSamplers .
9966 See external documentation.
9968 deleteSamplers(Samplers) -> ok
9970 Types:
9972 Samplers = [integer()]
9974 Delete named sampler objects
9976 gl:deleteSamplers deletes N sampler objects named by the ele‐
9978 ments of the array Ids . After a sampler object is deleted, its
9979 name is again unused. If a sampler object that is currently
9980 bound to a sampler unit is deleted, it is as though gl:bindSam‐
9981 pler/2 is called with unit set to the unit the sampler is bound
9982 to and sampler zero. Unused names in samplers are silently
9983 ignored, as is the reserved name zero.
9984 See external documentation.
9986 isSampler(Sampler) -> 0 | 1
9988 Types:
9990 Sampler = integer()
9992 Determine if a name corresponds to a sampler object
9994 gl:isSampler returns ?GL_TRUE if Id is currently the name of a
9996 sampler object. If Id is zero, or is a non-zero value that is
9997 not currently the name of a sampler object, or if an error
9998 occurs, gl:isSampler returns ?GL_FALSE.
9999 See external documentation.
10001 bindSampler(Unit, Sampler) -> ok
10003 Types:
10005 Unit = integer()
10007 Sampler = integer()
10008 Bind a named sampler to a texturing target
10010 gl:bindSampler binds Sampler to the texture unit at index Unit .
10012 Sampler must be zero or the name of a sampler object previously
10013 returned from a call to gl:genSamplers/1 . Unit must be less
10014 than the value of ?GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS.
10015 See external documentation.
10017 samplerParameteri(Sampler, Pname, Param) -> ok
10019 Types:
10021 Sampler = integer()
10023 Pname = enum()
10024 Param = integer()
10025 Set sampler parameters
10027 gl:samplerParameter assigns the value or values in Params to the
10029 sampler parameter specified as Pname . Sampler specifies the
10030 sampler object to be modified, and must be the name of a sampler
10031 object previously returned from a call to gl:genSamplers/1 . The
10032 following symbols are accepted in Pname :
10033 See external documentation.
10035 samplerParameteriv(Sampler, Pname, Param) -> ok
10037 Types:
10039 Sampler = integer()
10041 Pname = enum()
10042 Param = [integer()]
10043 See samplerParameteri/3
10045 samplerParameterf(Sampler, Pname, Param) -> ok
10047 Types:
10049 Sampler = integer()
10051 Pname = enum()
10052 Param = float()
10053 See samplerParameteri/3
10055 samplerParameterfv(Sampler, Pname, Param) -> ok
10057 Types:
10059 Sampler = integer()
10061 Pname = enum()
10062 Param = [float()]
10063 See samplerParameteri/3
10065 samplerParameterIiv(Sampler, Pname, Param) -> ok
10067 Types:
10069 Sampler = integer()
10071 Pname = enum()
10072 Param = [integer()]
10073 See samplerParameteri/3
10075 samplerParameterIuiv(Sampler, Pname, Param) -> ok
10077 Types:
10079 Sampler = integer()
10081 Pname = enum()
10082 Param = [integer()]
10083 glSamplerParameterI
10085 See external documentation.
10087 getSamplerParameteriv(Sampler, Pname) -> [integer()]
10089 Types:
10091 Sampler = integer()
10093 Pname = enum()
10094 Return sampler parameter values
10096 gl:getSamplerParameter returns in Params the value or values of
10098 the sampler parameter specified as Pname . Sampler defines the
10099 target sampler, and must be the name of an existing sampler
10100 object, returned from a previous call to gl:genSamplers/1 .
10101 Pname accepts the same symbols as gl:samplerParameteri/3 , with
10102 the same interpretations:
10103 See external documentation.
10105 getSamplerParameterIiv(Sampler, Pname) -> [integer()]
10107 Types:
10109 Sampler = integer()
10111 Pname = enum()
10112 See getSamplerParameteriv/2
10114 getSamplerParameterfv(Sampler, Pname) -> [float()]
10116 Types:
10118 Sampler = integer()
10120 Pname = enum()
10121 See getSamplerParameteriv/2
10123 getSamplerParameterIuiv(Sampler, Pname) -> [integer()]
10125 Types:
10127 Sampler = integer()
10129 Pname = enum()
10130 glGetSamplerParameterI
10132 See external documentation.
10134 queryCounter(Id, Target) -> ok
10136 Types:
10138 Id = integer()
10140 Target = enum()
10141 Record the GL time into a query object after all previous com‐
10143 mands have reached the GL server but have not yet necessarily
10144 executed.
10145 gl:queryCounter causes the GL to record the current time into
10147 the query object named Id . Target must be ?GL_TIMESTAMP. The
10148 time is recorded after all previous commands on the GL client
10149 and server state and the framebuffer have been fully realized.
10150 When the time is recorded, the query result for that object is
10151 marked available. gl:queryCounter timer queries can be used
10152 within a gl:beginQuery/2 / gl:beginQuery/2 block where the tar‐
10153 get is ?GL_TIME_ELAPSED and it does not affect the result of
10154 that query object.
10155 See external documentation.
10157 getQueryObjecti64v(Id, Pname) -> integer()
10159 Types:
10161 Id = integer()
10163 Pname = enum()
10164 glGetQueryObjecti64v
10166 See external documentation.
10168 getQueryObjectui64v(Id, Pname) -> integer()
10170 Types:
10172 Id = integer()
10174 Pname = enum()
10175 glGetQueryObjectui64v
10177 See external documentation.
10179 drawArraysIndirect(Mode, Indirect) -> ok
10181 Types:
10183 Mode = enum()
10185 Indirect = offset() | mem()
10186 Render primitives from array data, taking parameters from memory
10188 gl:drawArraysIndirect specifies multiple geometric primitives
10190 with very few subroutine calls. gl:drawArraysIndirect behaves
10191 similarly to gl:drawArraysInstancedBaseInstance/5 , execept that
10192 the parameters to gl:drawArraysInstancedBaseInstance/5 are
10193 stored in memory at the address given by Indirect .
10194 See external documentation.
10196 drawElementsIndirect(Mode, Type, Indirect) -> ok
10198 Types:
10200 Mode = enum()
10202 Type = enum()
10203 Indirect = offset() | mem()
10204 Render indexed primitives from array data, taking parameters
10206 from memory
10207 gl:drawElementsIndirect specifies multiple indexed geometric
10209 primitives with very few subroutine calls. gl:drawElementsIndi‐
10210 rect behaves similarly to gl:drawElementsInstancedBaseVertexBa‐
10211 seInstance/7 , execpt that the parameters to gl:drawElementsIn‐
10212 stancedBaseVertexBaseInstance/7 are stored in memory at the
10213 address given by Indirect .
10214 See external documentation.
10216 uniform1d(Location, X) -> ok
10218 Types:
10220 Location = integer()
10222 X = float()
10223 See uniform1f/2
10225 uniform2d(Location, X, Y) -> ok
10227 Types:
10229 Location = integer()
10231 X = float()
10232 Y = float()
10233 See uniform1f/2
10235 uniform3d(Location, X, Y, Z) -> ok
10237 Types:
10239 Location = integer()
10241 X = float()
10242 Y = float()
10243 Z = float()
10244 See uniform1f/2
10246 uniform4d(Location, X, Y, Z, W) -> ok
10248 Types:
10250 Location = integer()
10252 X = float()
10253 Y = float()
10254 Z = float()
10255 W = float()
10256 See uniform1f/2
10258 uniform1dv(Location, Value) -> ok
10260 Types:
10262 Location = integer()
10264 Value = [float()]
10265 See uniform1f/2
10267 uniform2dv(Location, Value) -> ok
10269 Types:
10271 Location = integer()
10273 Value = [{float(), float()}]
10274 See uniform1f/2
10276 uniform3dv(Location, Value) -> ok
10278 Types:
10280 Location = integer()
10282 Value = [{float(), float(), float()}]
10283 See uniform1f/2
10285 uniform4dv(Location, Value) -> ok
10287 Types:
10289 Location = integer()
10291 Value = [{float(), float(), float(), float()}]
10292 See uniform1f/2
10294 uniformMatrix2dv(Location, Transpose, Value) -> ok
10296 Types:
10298 Location = integer()
10300 Transpose = 0 | 1
10301 Value = [{float(), float(), float(), float()}]
10302 See uniform1f/2
10304 uniformMatrix3dv(Location, Transpose, Value) -> ok
10306 Types:
10308 Location = integer()
10310 Transpose = 0 | 1
10311 Value = [{float(), float(), float(), float(), float(),
10312 float(), float(), float(), float()}]
10313 See uniform1f/2
10315 uniformMatrix4dv(Location, Transpose, Value) -> ok
10317 Types:
10319 Location = integer()
10321 Transpose = 0 | 1
10322 Value = [{float(), float(), float(), float(), float(),
10323 float(), float(), float(), float(), float(), float(),
10324 float(), float(), float(), float(), float()}]
10325 See uniform1f/2
10327 uniformMatrix2x3dv(Location, Transpose, Value) -> ok
10329 Types:
10331 Location = integer()
10333 Transpose = 0 | 1
10334 Value = [{float(), float(), float(), float(), float(),
10335 float()}]
10336 See uniform1f/2
10338 uniformMatrix2x4dv(Location, Transpose, Value) -> ok
10340 Types:
10342 Location = integer()
10344 Transpose = 0 | 1
10345 Value = [{float(), float(), float(), float(), float(),
10346 float(), float(), float()}]
10347 See uniform1f/2
10349 uniformMatrix3x2dv(Location, Transpose, Value) -> ok
10351 Types:
10353 Location = integer()
10355 Transpose = 0 | 1
10356 Value = [{float(), float(), float(), float(), float(),
10357 float()}]
10358 See uniform1f/2
10360 uniformMatrix3x4dv(Location, Transpose, Value) -> ok
10362 Types:
10364 Location = integer()
10366 Transpose = 0 | 1
10367 Value = [{float(), float(), float(), float(), float(),
10368 float(), float(), float(), float(), float(), float(),
10369 float()}]
10370 See uniform1f/2
10372 uniformMatrix4x2dv(Location, Transpose, Value) -> ok
10374 Types:
10376 Location = integer()
10378 Transpose = 0 | 1
10379 Value = [{float(), float(), float(), float(), float(),
10380 float(), float(), float()}]
10381 See uniform1f/2
10383 uniformMatrix4x3dv(Location, Transpose, Value) -> ok
10385 Types:
10387 Location = integer()
10389 Transpose = 0 | 1
10390 Value = [{float(), float(), float(), float(), float(),
10391 float(), float(), float(), float(), float(), float(),
10392 float()}]
10393 See uniform1f/2
10395 getUniformdv(Program, Location) -> matrix()
10397 Types:
10399 Program = integer()
10401 Location = integer()
10402 See getUniformfv/2
10404 getSubroutineUniformLocation(Program, Shadertype, Name) -> integer()
10406 Types:
10408 Program = integer()
10410 Shadertype = enum()
10411 Name = string()
10412 Retrieve the location of a subroutine uniform of a given shader
10414 stage within a program
10415 gl:getSubroutineUniformLocation returns the location of the sub‐
10417 routine uniform variable Name in the shader stage of type
10418 Shadertype attached to Program , with behavior otherwise identi‐
10419 cal to gl:getUniformLocation/2 .
10420 See external documentation.
10422 getSubroutineIndex(Program, Shadertype, Name) -> integer()
10424 Types:
10426 Program = integer()
10428 Shadertype = enum()
10429 Name = string()
10430 Retrieve the index of a subroutine uniform of a given shader
10432 stage within a program
10433 gl:getSubroutineIndex returns the index of a subroutine uniform
10435 within a shader stage attached to a program object. Program con‐
10436 tains the name of the program to which the shader is attached.
10437 Shadertype specifies the stage from which to query shader sub‐
10438 routine index. Name contains the null-terminated name of the
10439 subroutine uniform whose name to query.
10440 See external documentation.
10442 getActiveSubroutineUniformName(Program, Shadertype, Index, Bufsize) ->
10444 string()
10445 Types:
10447 Program = integer()
10449 Shadertype = enum()
10450 Index = integer()
10451 Bufsize = integer()
10452 Query the name of an active shader subroutine uniform
10454 gl:getActiveSubroutineUniformName retrieves the name of an
10456 active shader subroutine uniform. Program contains the name of
10457 the program containing the uniform. Shadertype specifies the
10458 stage for which which the uniform location, given by Index , is
10459 valid. Index must be between zero and the value of
10460 ?GL_ACTIVE_SUBROUTINE_UNIFORMS minus one for the shader stage.
10461 See external documentation.
10463 getActiveSubroutineName(Program, Shadertype, Index, Bufsize) ->
10465 string()
10466 Types:
10468 Program = integer()
10470 Shadertype = enum()
10471 Index = integer()
10472 Bufsize = integer()
10473 Query the name of an active shader subroutine
10475 gl:getActiveSubroutineName queries the name of an active shader
10477 subroutine uniform from the program object given in Program .
10478 Index specifies the index of the shader subroutine uniform
10479 within the shader stage given by Stage , and must between zero
10480 and the value of ?GL_ACTIVE_SUBROUTINES minus one for the shader
10481 stage.
10482 See external documentation.
10484 uniformSubroutinesuiv(Shadertype, Indices) -> ok
10486 Types:
10488 Shadertype = enum()
10490 Indices = [integer()]
10491 Load active subroutine uniforms
10493 gl:uniformSubroutines loads all active subroutine uniforms for
10495 shader stage Shadertype of the current program with subroutine
10496 indices from Indices , storing Indices[i] into the uniform at
10497 location I . Count must be equal to the value of ?GL_ACTIVE_SUB‐
10498 ROUTINE_UNIFORM_LOCATIONS for the program currently in use at
10499 shader stage Shadertype . Furthermore, all values in Indices
10500 must be less than the value of ?GL_ACTIVE_SUBROUTINES for the
10501 shader stage.
10502 See external documentation.
10504 getUniformSubroutineuiv(Shadertype, Location) -> {integer(), integer(),
10506 integer(), integer(), integer(), integer(), integer(), integer(), inte‐
10507 ger(), integer(), integer(), integer(), integer(), integer(), inte‐
10508 ger(), integer()}
10509 Types:
10511 Shadertype = enum()
10513 Location = integer()
10514 Retrieve the value of a subroutine uniform of a given shader
10516 stage of the current program
10517 gl:getUniformSubroutine retrieves the value of the subroutine
10519 uniform at location Location for shader stage Shadertype of the
10520 current program. Location must be less than the value of
10521 ?GL_ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS for the shader currently
10522 in use at shader stage Shadertype . The value of the subroutine
10523 uniform is returned in Values .
10524 See external documentation.
10526 getProgramStageiv(Program, Shadertype, Pname) -> integer()
10528 Types:
10530 Program = integer()
10532 Shadertype = enum()
10533 Pname = enum()
10534 Retrieve properties of a program object corresponding to a spec‐
10536 ified shader stage
10537 gl:getProgramStage queries a parameter of a shader stage
10539 attached to a program object. Program contains the name of the
10540 program to which the shader is attached. Shadertype specifies
10541 the stage from which to query the parameter. Pname specifies
10542 which parameter should be queried. The value or values of the
10543 parameter to be queried is returned in the variable whose
10544 address is given in Values .
10545 See external documentation.
10547 patchParameteri(Pname, Value) -> ok
10549 Types:
10551 Pname = enum()
10553 Value = integer()
10554 Specifies the parameters for patch primitives
10556 gl:patchParameter specifies the parameters that will be used for
10558 patch primitives. Pname specifies the parameter to modify and
10559 must be either ?GL_PATCH_VERTICES, ?GL_PATCH_DEFAULT_OUTER_LEVEL
10560 or ?GL_PATCH_DEFAULT_INNER_LEVEL. For gl:patchParameteri, Value
10561 specifies the new value for the parameter specified by Pname .
10562 For gl:patchParameterfv, Values specifies the address of an
10563 array containing the new values for the parameter specified by
10564 Pname .
10565 See external documentation.
10567 patchParameterfv(Pname, Values) -> ok
10569 Types:
10571 Pname = enum()
10573 Values = [float()]
10574 See patchParameteri/2
10576 bindTransformFeedback(Target, Id) -> ok
10578 Types:
10580 Target = enum()
10582 Id = integer()
10583 Bind a transform feedback object
10585 gl:bindTransformFeedback binds the transform feedback object
10587 with name Id to the current GL state. Id must be a name previ‐
10588 ously returned from a call to gl:genTransformFeedbacks/1 . If Id
10589 has not previously been bound, a new transform feedback object
10590 with name Id and initialized with with the default transform
10591 state vector is created.
10592 See external documentation.
10594 deleteTransformFeedbacks(Ids) -> ok
10596 Types:
10598 Ids = [integer()]
10600 Delete transform feedback objects
10602 gl:deleteTransformFeedbacks deletes the N transform feedback
10604 objects whose names are stored in the array Ids . Unused names
10605 in Ids are ignored, as is the name zero. After a transform feed‐
10606 back object is deleted, its name is again unused and it has no
10607 contents. If an active transform feedback object is deleted, its
10608 name immediately becomes unused, but the underlying object is
10609 not deleted until it is no longer active.
10610 See external documentation.
10612 genTransformFeedbacks(N) -> [integer()]
10614 Types:
10616 N = integer()
10618 Reserve transform feedback object names
10620 gl:genTransformFeedbacks returns N previously unused transform
10622 feedback object names in Ids . These names are marked as used,
10623 for the purposes of gl:genTransformFeedbacks only, but they
10624 acquire transform feedback state only when they are first bound.
10625 See external documentation.
10627 isTransformFeedback(Id) -> 0 | 1
10629 Types:
10631 Id = integer()
10633 Determine if a name corresponds to a transform feedback object
10635 gl:isTransformFeedback returns ?GL_TRUE if Id is currently the
10637 name of a transform feedback object. If Id is zero, or if ?id is
10638 not the name of a transform feedback object, or if an error
10639 occurs, gl:isTransformFeedback returns ?GL_FALSE. If Id is a
10640 name returned by gl:genTransformFeedbacks/1 , but that has not
10641 yet been bound through a call to gl:bindTransformFeedback/2 ,
10642 then the name is not a transform feedback object and gl:isTrans‐
10643 formFeedback returns ?GL_FALSE .
10644 See external documentation.
10646 pauseTransformFeedback() -> ok
10648 Pause transform feedback operations
10650 gl:pauseTransformFeedback pauses transform feedback operations
10652 on the currently active transform feedback object. When trans‐
10653 form feedback operations are paused, transform feedback is still
10654 considered active and changing most transform feedback state
10655 related to the object results in an error. However, a new trans‐
10656 form feedback object may be bound while transform feedback is
10657 paused.
10658 See external documentation.
10660 resumeTransformFeedback() -> ok
10662 Resume transform feedback operations
10664 gl:resumeTransformFeedback resumes transform feedback operations
10666 on the currently active transform feedback object. When trans‐
10667 form feedback operations are paused, transform feedback is still
10668 considered active and changing most transform feedback state
10669 related to the object results in an error. However, a new trans‐
10670 form feedback object may be bound while transform feedback is
10671 paused.
10672 See external documentation.
10674 drawTransformFeedback(Mode, Id) -> ok
10676 Types:
10678 Mode = enum()
10680 Id = integer()
10681 Render primitives using a count derived from a transform feed‐
10683 back object
10684 gl:drawTransformFeedback draws primitives of a type specified by
10686 Mode using a count retrieved from the transform feedback speci‐
10687 fied by Id . Calling gl:drawTransformFeedback is equivalent to
10688 calling gl:drawArrays/3 with Mode as specified, First set to
10689 zero, and Count set to the number of vertices captured on vertex
10690 stream zero the last time transform feedback was active on the
10691 transform feedback object named by Id .
10692 See external documentation.
10694 drawTransformFeedbackStream(Mode, Id, Stream) -> ok
10696 Types:
10698 Mode = enum()
10700 Id = integer()
10701 Stream = integer()
10702 Render primitives using a count derived from a specifed stream
10704 of a transform feedback object
10705 gl:drawTransformFeedbackStream draws primitives of a type speci‐
10707 fied by Mode using a count retrieved from the transform feedback
10708 stream specified by Stream of the transform feedback object
10709 specified by Id . Calling gl:drawTransformFeedbackStream is
10710 equivalent to calling gl:drawArrays/3 with Mode as specified,
10711 First set to zero, and Count set to the number of vertices cap‐
10712 tured on vertex stream Stream the last time transform feedback
10713 was active on the transform feedback object named by Id .
10714 See external documentation.
10716 beginQueryIndexed(Target, Index, Id) -> ok
10718 Types:
10720 Target = enum()
10722 Index = integer()
10723 Id = integer()
10724 glBeginQueryIndexe
10726 See external documentation.
10728 endQueryIndexed(Target, Index) -> ok
10730 Types:
10732 Target = enum()
10734 Index = integer()
10735 Delimit the boundaries of a query object on an indexed target
10737 gl:beginQueryIndexed and gl:endQueryIndexed/2 delimit the bound‐
10739 aries of a query object. Query must be a name previously
10740 returned from a call to gl:genQueries/1 . If a query object with
10741 name Id does not yet exist it is created with the type deter‐
10742 mined by Target . Target must be one of ?GL_SAMPLES_PASSED,
10743 ?GL_ANY_SAMPLES_PASSED , ?GL_PRIMITIVES_GENERATED, ?GL_TRANS‐
10744 FORM_FEEDBACK_PRIMITIVES_WRITTEN, or ?GL_TIME_ELAPSED . The
10745 behavior of the query object depends on its type and is as fol‐
10746 lows.
10747 See external documentation.
10749 getQueryIndexediv(Target, Index, Pname) -> integer()
10751 Types:
10753 Target = enum()
10755 Index = integer()
10756 Pname = enum()
10757 Return parameters of an indexed query object target
10759 gl:getQueryIndexediv returns in Params a selected parameter of
10761 the indexed query object target specified by Target and Index .
10762 Index specifies the index of the query object target and must be
10763 between zero and a target-specific maxiumum.
10764 See external documentation.
10766 releaseShaderCompiler() -> ok
10768 Release resources consumed by the implementation's shader com‐
10770 piler
10771 gl:releaseShaderCompiler provides a hint to the implementation
10773 that it may free internal resources associated with its shader
10774 compiler. gl:compileShader/1 may subsequently be called and the
10775 implementation may at that time reallocate resources previously
10776 freed by the call to gl:releaseShaderCompiler.
10777 See external documentation.
10779 shaderBinary(Shaders, Binaryformat, Binary) -> ok
10781 Types:
10783 Shaders = [integer()]
10785 Binaryformat = enum()
10786 Binary = binary()
10787 Load pre-compiled shader binaries
10789 gl:shaderBinary loads pre-compiled shader binary code into the
10791 Count shader objects whose handles are given in Shaders . Binary
10792 points to Length bytes of binary shader code stored in client
10793 memory. BinaryFormat specifies the format of the pre-compiled
10794 code.
10795 See external documentation.
10797 getShaderPrecisionFormat(Shadertype, Precisiontype) -> {Range::{inte‐
10799 ger(), integer()}, Precision::integer()}
10800 Types:
10802 Shadertype = enum()
10804 Precisiontype = enum()
10805 Retrieve the range and precision for numeric formats supported
10807 by the shader compiler
10808 gl:getShaderPrecisionFormat retrieves the numeric range and pre‐
10810 cision for the implementation's representation of quantities in
10811 different numeric formats in specified shader type. ShaderType
10812 specifies the type of shader for which the numeric precision and
10813 range is to be retrieved and must be one of ?GL_VERTEX_SHADER or
10814 ?GL_FRAGMENT_SHADER. PrecisionType specifies the numeric format
10815 to query and must be one of ?GL_LOW_FLOAT, ?GL_MEDIUM_FLOAT
10816 ?GL_HIGH_FLOAT, ?GL_LOW_INT, ?GL_MEDIUM_INT, or ?GL_HIGH_INT.
10817 See external documentation.
10819 depthRangef(N, F) -> ok
10821 Types:
10823 N = clamp()
10825 F = clamp()
10826 See depthRange/2
10828 clearDepthf(D) -> ok
10830 Types:
10832 D = clamp()
10834 glClearDepthf
10836 See external documentation.
10838 getProgramBinary(Program, BufSize) -> {BinaryFormat::enum(),
10840 Binary::binary()}
10841 Types:
10843 Program = integer()
10845 BufSize = integer()
10846 Return a binary representation of a program object's compiled
10848 and linked executable source
10849 gl:getProgramBinary returns a binary representation of the com‐
10851 piled and linked executable for Program into the array of bytes
10852 whose address is specified in Binary . The maximum number of
10853 bytes that may be written into Binary is specified by BufSize .
10854 If the program binary is greater in size than BufSize bytes,
10855 then an error is generated, otherwise the actual number of bytes
10856 written into Binary is returned in the variable whose address is
10857 given by Length . If Length is ?NULL, then no length is
10858 returned.
10859 See external documentation.
10861 programBinary(Program, BinaryFormat, Binary) -> ok
10863 Types:
10865 Program = integer()
10867 BinaryFormat = enum()
10868 Binary = binary()
10869 Load a program object with a program binary
10871 gl:programBinary loads a program object with a program binary
10873 previously returned from gl:getProgramBinary/2 . BinaryFormat
10874 and Binary must be those returned by a previous call to gl:get‐
10875 ProgramBinary/2 , and Length must be the length returned by
10876 gl:getProgramBinary/2 , or by gl:getProgramiv/2 when called with
10877 Pname set to ?GL_PROGRAM_BINARY_LENGTH. If these conditions are
10878 not met, loading the program binary will fail and Program 's
10879 ?GL_LINK_STATUS will be set to ?GL_FALSE.
10880 See external documentation.
10882 programParameteri(Program, Pname, Value) -> ok
10884 Types:
10886 Program = integer()
10888 Pname = enum()
10889 Value = integer()
10890 Specify a parameter for a program object
10892 gl:programParameter specifies a new value for the parameter
10894 nameed by Pname for the program object Program .
10895 See external documentation.
10897 useProgramStages(Pipeline, Stages, Program) -> ok
10899 Types:
10901 Pipeline = integer()
10903 Stages = integer()
10904 Program = integer()
10905 Bind stages of a program object to a program pipeline
10907 gl:useProgramStages binds executables from a program object
10909 associated with a specified set of shader stages to the program
10910 pipeline object given by Pipeline . Pipeline specifies the pro‐
10911 gram pipeline object to which to bind the executables. Stages
10912 contains a logical combination of bits indicating the shader
10913 stages to use within Program with the program pipeline object
10914 Pipeline . Stages must be a logical combination of ?GL_VER‐
10915 TEX_SHADER_BIT, ?GL_TESS_CONTROL_SHADER_BIT, ?GL_TESS_EVALUA‐
10916 TION_SHADER_BIT , ?GL_GEOMETRY_SHADER_BIT, and ?GL_FRAG‐
10917 MENT_SHADER_BIT. Additionally, the special value
10918 ?GL_ALL_SHADER_BITS may be specified to indicate that all exe‐
10919 cutables contained in Program should be installed in Pipeline .
10920 See external documentation.
10922 activeShaderProgram(Pipeline, Program) -> ok
10924 Types:
10926 Pipeline = integer()
10928 Program = integer()
10929 Set the active program object for a program pipeline object
10931 gl:activeShaderProgram sets the linked program named by Program
10933 to be the active program for the program pipeline object Pipe‐
10934 line . The active program in the active program pipeline object
10935 is the target of calls to gl:uniform1f/2 when no program has
10936 been made current through a call to gl:useProgram/1 .
10937 See external documentation.
10939 createShaderProgramv(Type, Strings) -> integer()
10941 Types:
10943 Type = enum()
10945 Strings = iolist()
10946 glCreateShaderProgramv
10948 See external documentation.
10950 bindProgramPipeline(Pipeline) -> ok
10952 Types:
10954 Pipeline = integer()
10956 Bind a program pipeline to the current context
10958 gl:bindProgramPipeline binds a program pipeline object to the
10960 current context. Pipeline must be a name previously returned
10961 from a call to gl:genProgramPipelines/1 . If no program pipeline
10962 exists with name Pipeline then a new pipeline object is created
10963 with that name and initialized to the default state vector.
10964 See external documentation.
10966 deleteProgramPipelines(Pipelines) -> ok
10968 Types:
10970 Pipelines = [integer()]
10972 Delete program pipeline objects
10974 gl:deleteProgramPipelines deletes the N program pipeline objects
10976 whose names are stored in the array Pipelines . Unused names in
10977 Pipelines are ignored, as is the name zero. After a program
10978 pipeline object is deleted, its name is again unused and it has
10979 no contents. If program pipeline object that is currently bound
10980 is deleted, the binding for that object reverts to zero and no
10981 program pipeline object becomes current.
10982 See external documentation.
10984 genProgramPipelines(N) -> [integer()]
10986 Types:
10988 N = integer()
10990 Reserve program pipeline object names
10992 gl:genProgramPipelines returns N previously unused program pipe‐
10994 line object names in Pipelines . These names are marked as used,
10995 for the purposes of gl:genProgramPipelines only, but they
10996 acquire program pipeline state only when they are first bound.
10997 See external documentation.
10999 isProgramPipeline(Pipeline) -> 0 | 1
11001 Types:
11003 Pipeline = integer()
11005 Determine if a name corresponds to a program pipeline object
11007 gl:isProgramPipeline returns ?GL_TRUE if Pipeline is currently
11009 the name of a program pipeline object. If Pipeline is zero, or
11010 if ?pipeline is not the name of a program pipeline object, or if
11011 an error occurs, gl:isProgramPipeline returns ?GL_FALSE. If
11012 Pipeline is a name returned by gl:genProgramPipelines/1 , but
11013 that has not yet been bound through a call to gl:bindPro‐
11014 gramPipeline/1 , then the name is not a program pipeline object
11015 and gl:isProgramPipeline returns ?GL_FALSE .
11016 See external documentation.
11018 getProgramPipelineiv(Pipeline, Pname) -> integer()
11020 Types:
11022 Pipeline = integer()
11024 Pname = enum()
11025 Retrieve properties of a program pipeline object
11027 gl:getProgramPipelineiv retrieves the value of a property of the
11029 program pipeline object Pipeline . Pname specifies the name of
11030 the parameter whose value to retrieve. The value of the parame‐
11031 ter is written to the variable whose address is given by Params
11032 .
11033 See external documentation.
11035 programUniform1i(Program, Location, V0) -> ok
11037 Types:
11039 Program = integer()
11041 Location = integer()
11042 V0 = integer()
11043 Specify the value of a uniform variable for a specified program
11045 object
11046 gl:programUniform modifies the value of a uniform variable or a
11048 uniform variable array. The location of the uniform variable to
11049 be modified is specified by Location , which should be a value
11050 returned by gl:getUniformLocation/2 . gl:programUniform operates
11051 on the program object specified by Program .
11052 See external documentation.
11054 programUniform1iv(Program, Location, Value) -> ok
11056 Types:
11058 Program = integer()
11060 Location = integer()
11061 Value = [integer()]
11062 See programUniform1i/3
11064 programUniform1f(Program, Location, V0) -> ok
11066 Types:
11068 Program = integer()
11070 Location = integer()
11071 V0 = float()
11072 See programUniform1i/3
11074 programUniform1fv(Program, Location, Value) -> ok
11076 Types:
11078 Program = integer()
11080 Location = integer()
11081 Value = [float()]
11082 See programUniform1i/3
11084 programUniform1d(Program, Location, V0) -> ok
11086 Types:
11088 Program = integer()
11090 Location = integer()
11091 V0 = float()
11092 See programUniform1i/3
11094 programUniform1dv(Program, Location, Value) -> ok
11096 Types:
11098 Program = integer()
11100 Location = integer()
11101 Value = [float()]
11102 See programUniform1i/3
11104 programUniform1ui(Program, Location, V0) -> ok
11106 Types:
11108 Program = integer()
11110 Location = integer()
11111 V0 = integer()
11112 See programUniform1i/3
11114 programUniform1uiv(Program, Location, Value) -> ok
11116 Types:
11118 Program = integer()
11120 Location = integer()
11121 Value = [integer()]
11122 See programUniform1i/3
11124 programUniform2i(Program, Location, V0, V1) -> ok
11126 Types:
11128 Program = integer()
11130 Location = integer()
11131 V0 = integer()
11132 V1 = integer()
11133 See programUniform1i/3
11135 programUniform2iv(Program, Location, Value) -> ok
11137 Types:
11139 Program = integer()
11141 Location = integer()
11142 Value = [{integer(), integer()}]
11143 See programUniform1i/3
11145 programUniform2f(Program, Location, V0, V1) -> ok
11147 Types:
11149 Program = integer()
11151 Location = integer()
11152 V0 = float()
11153 V1 = float()
11154 See programUniform1i/3
11156 programUniform2fv(Program, Location, Value) -> ok
11158 Types:
11160 Program = integer()
11162 Location = integer()
11163 Value = [{float(), float()}]
11164 See programUniform1i/3
11166 programUniform2d(Program, Location, V0, V1) -> ok
11168 Types:
11170 Program = integer()
11172 Location = integer()
11173 V0 = float()
11174 V1 = float()
11175 See programUniform1i/3
11177 programUniform2dv(Program, Location, Value) -> ok
11179 Types:
11181 Program = integer()
11183 Location = integer()
11184 Value = [{float(), float()}]
11185 See programUniform1i/3
11187 programUniform2ui(Program, Location, V0, V1) -> ok
11189 Types:
11191 Program = integer()
11193 Location = integer()
11194 V0 = integer()
11195 V1 = integer()
11196 See programUniform1i/3
11198 programUniform2uiv(Program, Location, Value) -> ok
11200 Types:
11202 Program = integer()
11204 Location = integer()
11205 Value = [{integer(), integer()}]
11206 See programUniform1i/3
11208 programUniform3i(Program, Location, V0, V1, V2) -> ok
11210 Types:
11212 Program = integer()
11214 Location = integer()
11215 V0 = integer()
11216 V1 = integer()
11217 V2 = integer()
11218 See programUniform1i/3
11220 programUniform3iv(Program, Location, Value) -> ok
11222 Types:
11224 Program = integer()
11226 Location = integer()
11227 Value = [{integer(), integer(), integer()}]
11228 See programUniform1i/3
11230 programUniform3f(Program, Location, V0, V1, V2) -> ok
11232 Types:
11234 Program = integer()
11236 Location = integer()
11237 V0 = float()
11238 V1 = float()
11239 V2 = float()
11240 See programUniform1i/3
11242 programUniform3fv(Program, Location, Value) -> ok
11244 Types:
11246 Program = integer()
11248 Location = integer()
11249 Value = [{float(), float(), float()}]
11250 See programUniform1i/3
11252 programUniform3d(Program, Location, V0, V1, V2) -> ok
11254 Types:
11256 Program = integer()
11258 Location = integer()
11259 V0 = float()
11260 V1 = float()
11261 V2 = float()
11262 See programUniform1i/3
11264 programUniform3dv(Program, Location, Value) -> ok
11266 Types:
11268 Program = integer()
11270 Location = integer()
11271 Value = [{float(), float(), float()}]
11272 See programUniform1i/3
11274 programUniform3ui(Program, Location, V0, V1, V2) -> ok
11276 Types:
11278 Program = integer()
11280 Location = integer()
11281 V0 = integer()
11282 V1 = integer()
11283 V2 = integer()
11284 See programUniform1i/3
11286 programUniform3uiv(Program, Location, Value) -> ok
11288 Types:
11290 Program = integer()
11292 Location = integer()
11293 Value = [{integer(), integer(), integer()}]
11294 See programUniform1i/3
11296 programUniform4i(Program, Location, V0, V1, V2, V3) -> ok
11298 Types:
11300 Program = integer()
11302 Location = integer()
11303 V0 = integer()
11304 V1 = integer()
11305 V2 = integer()
11306 V3 = integer()
11307 See programUniform1i/3
11309 programUniform4iv(Program, Location, Value) -> ok
11311 Types:
11313 Program = integer()
11315 Location = integer()
11316 Value = [{integer(), integer(), integer(), integer()}]
11317 See programUniform1i/3
11319 programUniform4f(Program, Location, V0, V1, V2, V3) -> ok
11321 Types:
11323 Program = integer()
11325 Location = integer()
11326 V0 = float()
11327 V1 = float()
11328 V2 = float()
11329 V3 = float()
11330 See programUniform1i/3
11332 programUniform4fv(Program, Location, Value) -> ok
11334 Types:
11336 Program = integer()
11338 Location = integer()
11339 Value = [{float(), float(), float(), float()}]
11340 See programUniform1i/3
11342 programUniform4d(Program, Location, V0, V1, V2, V3) -> ok
11344 Types:
11346 Program = integer()
11348 Location = integer()
11349 V0 = float()
11350 V1 = float()
11351 V2 = float()
11352 V3 = float()
11353 See programUniform1i/3
11355 programUniform4dv(Program, Location, Value) -> ok
11357 Types:
11359 Program = integer()
11361 Location = integer()
11362 Value = [{float(), float(), float(), float()}]
11363 See programUniform1i/3
11365 programUniform4ui(Program, Location, V0, V1, V2, V3) -> ok
11367 Types:
11369 Program = integer()
11371 Location = integer()
11372 V0 = integer()
11373 V1 = integer()
11374 V2 = integer()
11375 V3 = integer()
11376 See programUniform1i/3
11378 programUniform4uiv(Program, Location, Value) -> ok
11380 Types:
11382 Program = integer()
11384 Location = integer()
11385 Value = [{integer(), integer(), integer(), integer()}]
11386 See programUniform1i/3
11388 programUniformMatrix2fv(Program, Location, Transpose, Value) -> ok
11390 Types:
11392 Program = integer()
11394 Location = integer()
11395 Transpose = 0 | 1
11396 Value = [{float(), float(), float(), float()}]
11397 See programUniform1i/3
11399 programUniformMatrix3fv(Program, Location, Transpose, Value) -> ok
11401 Types:
11403 Program = integer()
11405 Location = integer()
11406 Transpose = 0 | 1
11407 Value = [{float(), float(), float(), float(), float(),
11408 float(), float(), float(), float()}]
11409 See programUniform1i/3
11411 programUniformMatrix4fv(Program, Location, Transpose, Value) -> ok
11413 Types:
11415 Program = integer()
11417 Location = integer()
11418 Transpose = 0 | 1
11419 Value = [{float(), float(), float(), float(), float(),
11420 float(), float(), float(), float(), float(), float(),
11421 float(), float(), float(), float(), float()}]
11422 See programUniform1i/3
11424 programUniformMatrix2dv(Program, Location, Transpose, Value) -> ok
11426 Types:
11428 Program = integer()
11430 Location = integer()
11431 Transpose = 0 | 1
11432 Value = [{float(), float(), float(), float()}]
11433 See programUniform1i/3
11435 programUniformMatrix3dv(Program, Location, Transpose, Value) -> ok
11437 Types:
11439 Program = integer()
11441 Location = integer()
11442 Transpose = 0 | 1
11443 Value = [{float(), float(), float(), float(), float(),
11444 float(), float(), float(), float()}]
11445 See programUniform1i/3
11447 programUniformMatrix4dv(Program, Location, Transpose, Value) -> ok
11449 Types:
11451 Program = integer()
11453 Location = integer()
11454 Transpose = 0 | 1
11455 Value = [{float(), float(), float(), float(), float(),
11456 float(), float(), float(), float(), float(), float(),
11457 float(), float(), float(), float(), float()}]
11458 See programUniform1i/3
11460 programUniformMatrix2x3fv(Program, Location, Transpose, Value) -> ok
11462 Types:
11464 Program = integer()
11466 Location = integer()
11467 Transpose = 0 | 1
11468 Value = [{float(), float(), float(), float(), float(),
11469 float()}]
11470 See programUniform1i/3
11472 programUniformMatrix3x2fv(Program, Location, Transpose, Value) -> ok
11474 Types:
11476 Program = integer()
11478 Location = integer()
11479 Transpose = 0 | 1
11480 Value = [{float(), float(), float(), float(), float(),
11481 float()}]
11482 See programUniform1i/3
11484 programUniformMatrix2x4fv(Program, Location, Transpose, Value) -> ok
11486 Types:
11488 Program = integer()
11490 Location = integer()
11491 Transpose = 0 | 1
11492 Value = [{float(), float(), float(), float(), float(),
11493 float(), float(), float()}]
11494 See programUniform1i/3
11496 programUniformMatrix4x2fv(Program, Location, Transpose, Value) -> ok
11498 Types:
11500 Program = integer()
11502 Location = integer()
11503 Transpose = 0 | 1
11504 Value = [{float(), float(), float(), float(), float(),
11505 float(), float(), float()}]
11506 See programUniform1i/3
11508 programUniformMatrix3x4fv(Program, Location, Transpose, Value) -> ok
11510 Types:
11512 Program = integer()
11514 Location = integer()
11515 Transpose = 0 | 1
11516 Value = [{float(), float(), float(), float(), float(),
11517 float(), float(), float(), float(), float(), float(),
11518 float()}]
11519 See programUniform1i/3
11521 programUniformMatrix4x3fv(Program, Location, Transpose, Value) -> ok
11523 Types:
11525 Program = integer()
11527 Location = integer()
11528 Transpose = 0 | 1
11529 Value = [{float(), float(), float(), float(), float(),
11530 float(), float(), float(), float(), float(), float(),
11531 float()}]
11532 See programUniform1i/3
11534 programUniformMatrix2x3dv(Program, Location, Transpose, Value) -> ok
11536 Types:
11538 Program = integer()
11540 Location = integer()
11541 Transpose = 0 | 1
11542 Value = [{float(), float(), float(), float(), float(),
11543 float()}]
11544 See programUniform1i/3
11546 programUniformMatrix3x2dv(Program, Location, Transpose, Value) -> ok
11548 Types:
11550 Program = integer()
11552 Location = integer()
11553 Transpose = 0 | 1
11554 Value = [{float(), float(), float(), float(), float(),
11555 float()}]
11556 See programUniform1i/3
11558 programUniformMatrix2x4dv(Program, Location, Transpose, Value) -> ok
11560 Types:
11562 Program = integer()
11564 Location = integer()
11565 Transpose = 0 | 1
11566 Value = [{float(), float(), float(), float(), float(),
11567 float(), float(), float()}]
11568 See programUniform1i/3
11570 programUniformMatrix4x2dv(Program, Location, Transpose, Value) -> ok
11572 Types:
11574 Program = integer()
11576 Location = integer()
11577 Transpose = 0 | 1
11578 Value = [{float(), float(), float(), float(), float(),
11579 float(), float(), float()}]
11580 See programUniform1i/3
11582 programUniformMatrix3x4dv(Program, Location, Transpose, Value) -> ok
11584 Types:
11586 Program = integer()
11588 Location = integer()
11589 Transpose = 0 | 1
11590 Value = [{float(), float(), float(), float(), float(),
11591 float(), float(), float(), float(), float(), float(),
11592 float()}]
11593 See programUniform1i/3
11595 programUniformMatrix4x3dv(Program, Location, Transpose, Value) -> ok
11597 Types:
11599 Program = integer()
11601 Location = integer()
11602 Transpose = 0 | 1
11603 Value = [{float(), float(), float(), float(), float(),
11604 float(), float(), float(), float(), float(), float(),
11605 float()}]
11606 See programUniform1i/3
11608 validateProgramPipeline(Pipeline) -> ok
11610 Types:
11612 Pipeline = integer()
11614 Validate a program pipeline object against current GL state
11616 gl:validateProgramPipeline instructs the implementation to vali‐
11618 date the shader executables contained in Pipeline against the
11619 current GL state. The implementation may use this as an opportu‐
11620 nity to perform any internal shader modifications that may be
11621 required to ensure correct operation of the installed shaders
11622 given the current GL state.
11623 See external documentation.
11625 getProgramPipelineInfoLog(Pipeline, BufSize) -> string()
11627 Types:
11629 Pipeline = integer()
11631 BufSize = integer()
11632 Retrieve the info log string from a program pipeline object
11634 gl:getProgramPipelineInfoLog retrieves the info log for the pro‐
11636 gram pipeline object Pipeline . The info log, including its null
11637 terminator, is written into the array of characters whose
11638 address is given by InfoLog . The maximum number of characters
11639 that may be written into InfoLog is given by BufSize , and the
11640 actual number of characters written into InfoLog is returned in
11641 the integer whose address is given by Length . If Length is
11642 ?NULL, no length is returned.
11643 See external documentation.
11645 vertexAttribL1d(Index, X) -> ok
11647 Types:
11649 Index = integer()
11651 X = float()
11652 glVertexAttribL
11654 See external documentation.
11656 vertexAttribL2d(Index, X, Y) -> ok
11658 Types:
11660 Index = integer()
11662 X = float()
11663 Y = float()
11664 glVertexAttribL
11666 See external documentation.
11668 vertexAttribL3d(Index, X, Y, Z) -> ok
11670 Types:
11672 Index = integer()
11674 X = float()
11675 Y = float()
11676 Z = float()
11677 glVertexAttribL
11679 See external documentation.
11681 vertexAttribL4d(Index, X, Y, Z, W) -> ok
11683 Types:
11685 Index = integer()
11687 X = float()
11688 Y = float()
11689 Z = float()
11690 W = float()
11691 glVertexAttribL
11693 See external documentation.
11695 vertexAttribL1dv(Index::integer(), V) -> ok
11697 Types:
11699 V = {X::float()}
11701 Equivalent to vertexAttribL1d(Index, X).
11703 vertexAttribL2dv(Index::integer(), V) -> ok
11705 Types:
11707 V = {X::float(), Y::float()}
11709 Equivalent to vertexAttribL2d(Index, X, Y).
11711 vertexAttribL3dv(Index::integer(), V) -> ok
11713 Types:
11715 V = {X::float(), Y::float(), Z::float()}
11717 Equivalent to vertexAttribL3d(Index, X, Y, Z).
11719 vertexAttribL4dv(Index::integer(), V) -> ok
11721 Types:
11723 V = {X::float(), Y::float(), Z::float(), W::float()}
11725 Equivalent to vertexAttribL4d(Index, X, Y, Z, W).
11727 vertexAttribLPointer(Index, Size, Type, Stride, Pointer) -> ok
11729 Types:
11731 Index = integer()
11733 Size = integer()
11734 Type = enum()
11735 Stride = integer()
11736 Pointer = offset() | mem()
11737 glVertexAttribLPointer
11739 See external documentation.
11741 getVertexAttribLdv(Index, Pname) -> {float(), float(), float(),
11743 float()}
11744 Types:
11746 Index = integer()
11748 Pname = enum()
11749 glGetVertexAttribL
11751 See external documentation.
11753 viewportArrayv(First, V) -> ok
11755 Types:
11757 First = integer()
11759 V = [{float(), float(), float(), float()}]
11760 glViewportArrayv
11762 See external documentation.
11764 viewportIndexedf(Index, X, Y, W, H) -> ok
11766 Types:
11768 Index = integer()
11770 X = float()
11771 Y = float()
11772 W = float()
11773 H = float()
11774 Set a specified viewport
11776 gl:viewportIndexedf and gl:viewportIndexedfv specify the parame‐
11778 ters for a single viewport. Index specifies the index of the
11779 viewport to modify. Index must be less than the value of
11780 ?GL_MAX_VIEWPORTS. For gl:viewportIndexedf, X , Y , W , and H
11781 specify the left, bottom, width and height of the viewport in
11782 pixels, respectively. For gl:viewportIndexedfv, V contains the
11783 address of an array of floating point values specifying the left
11784 ( x), bottom ( y), width ( w), and height ( h) of each viewport,
11785 in that order. x and y give the location of the viewport's lower
11786 left corner, and w and h give the width and height of the view‐
11787 port, respectively. The viewport specifies the affine transfor‐
11788 mation of x and y from normalized device coordinates to window
11789 coordinates. Let (x nd y nd) be normalized device coordinates.
11790 Then the window coordinates (x w y w) are computed as follows:
11791 See external documentation.
11793 viewportIndexedfv(Index, V) -> ok
11795 Types:
11797 Index = integer()
11799 V = {float(), float(), float(), float()}
11800 See viewportIndexedf/5
11802 scissorArrayv(First, V) -> ok
11804 Types:
11806 First = integer()
11808 V = [{integer(), integer(), integer(), integer()}]
11809 glScissorArrayv
11811 See external documentation.
11813 scissorIndexed(Index, Left, Bottom, Width, Height) -> ok
11815 Types:
11817 Index = integer()
11819 Left = integer()
11820 Bottom = integer()
11821 Width = integer()
11822 Height = integer()
11823 glScissorIndexe
11825 See external documentation.
11827 scissorIndexedv(Index, V) -> ok
11829 Types:
11831 Index = integer()
11833 V = {integer(), integer(), integer(), integer()}
11834 glScissorIndexe
11836 See external documentation.
11838 depthRangeArrayv(First, V) -> ok
11840 Types:
11842 First = integer()
11844 V = [{clamp(), clamp()}]
11845 glDepthRangeArrayv
11847 See external documentation.
11849 depthRangeIndexed(Index, N, F) -> ok
11851 Types:
11853 Index = integer()
11855 N = clamp()
11856 F = clamp()
11857 glDepthRangeIndexe
11859 See external documentation.
11861 getFloati_v(Target, Index) -> [float()]
11863 Types:
11865 Target = enum()
11867 Index = integer()
11868 See getBooleanv/1
11870 getDoublei_v(Target, Index) -> [float()]
11872 Types:
11874 Target = enum()
11876 Index = integer()
11877 See getBooleanv/1
11879 debugMessageControlARB(Source, Type, Severity, Ids, Enabled) -> ok
11881 Types:
11883 Source = enum()
11885 Type = enum()
11886 Severity = enum()
11887 Ids = [integer()]
11888 Enabled = 0 | 1
11889 glDebugMessageControlARB
11891 See external documentation.
11893 debugMessageInsertARB(Source, Type, Id, Severity, Buf) -> ok
11895 Types:
11897 Source = enum()
11899 Type = enum()
11900 Id = integer()
11901 Severity = enum()
11902 Buf = string()
11903 glDebugMessageInsertARB
11905 See external documentation.
11907 getDebugMessageLogARB(Count, Bufsize) -> {integer(), Sources::[enum()],
11909 Types::[enum()], Ids::[integer()], Severities::[enum()], Mes‐
11910 sageLog::[string()]}
11911 Types:
11913 Count = integer()
11915 Bufsize = integer()
11916 glGetDebugMessageLogARB
11918 See external documentation.
11920 getGraphicsResetStatusARB() -> enum()
11922 glGetGraphicsResetStatusARB
11924 See external documentation.
11926 drawArraysInstancedBaseInstance(Mode, First, Count, Primcount, Basein‐
11928 stance) -> ok
11929 Types:
11931 Mode = enum()
11933 First = integer()
11934 Count = integer()
11935 Primcount = integer()
11936 Baseinstance = integer()
11937 Draw multiple instances of a range of elements with offset
11939 applied to instanced attributes
11940 gl:drawArraysInstancedBaseInstance behaves identically to
11942 gl:drawArrays/3 except that Primcount instances of the range of
11943 elements are executed and the value of the internal counter
11944 InstanceID advances for each iteration. InstanceID is an inter‐
11945 nal 32-bit integer counter that may be read by a vertex shader
11946 as ?gl_InstanceID .
11947 See external documentation.
11949 drawElementsInstancedBaseInstance(Mode, Count, Type, Indices, Prim‐
11951 count, Baseinstance) -> ok
11952 Types:
11954 Mode = enum()
11956 Count = integer()
11957 Type = enum()
11958 Indices = offset() | mem()
11959 Primcount = integer()
11960 Baseinstance = integer()
11961 Draw multiple instances of a set of elements with offset applied
11963 to instanced attributes
11964 gl:drawElementsInstancedBaseInstance behaves identically to
11966 gl:drawElements/4 except that Primcount instances of the set of
11967 elements are executed and the value of the internal counter
11968 InstanceID advances for each iteration. InstanceID is an inter‐
11969 nal 32-bit integer counter that may be read by a vertex shader
11970 as ?gl_InstanceID .
11971 See external documentation.
11973 drawElementsInstancedBaseVertexBaseInstance(Mode, Count, Type, Indices,
11975 Primcount, Basevertex, Baseinstance) -> ok
11976 Types:
11978 Mode = enum()
11980 Count = integer()
11981 Type = enum()
11982 Indices = offset() | mem()
11983 Primcount = integer()
11984 Basevertex = integer()
11985 Baseinstance = integer()
11986 Render multiple instances of a set of primitives from array data
11988 with a per-element offset
11989 gl:drawElementsInstancedBaseVertexBaseInstance behaves identi‐
11991 cally to gl:drawElementsInstanced/5 except that the ith element
11992 transferred by the corresponding draw call will be taken from
11993 element Indices [i] + Basevertex of each enabled array. If the
11994 resulting value is larger than the maximum value representable
11995 by Type , it is as if the calculation were upconverted to 32-bit
11996 unsigned integers (with wrapping on overflow conditions). The
11997 operation is undefined if the sum would be negative. The Basev‐
11998 ertex has no effect on the shader-visible value of ?gl_VertexID.
11999 See external documentation.
12001 drawTransformFeedbackInstanced(Mode, Id, Primcount) -> ok
12003 Types:
12005 Mode = enum()
12007 Id = integer()
12008 Primcount = integer()
12009 glDrawTransformFeedbackInstance
12011 See external documentation.
12013 drawTransformFeedbackStreamInstanced(Mode, Id, Stream, Primcount) -> ok
12015 Types:
12017 Mode = enum()
12019 Id = integer()
12020 Stream = integer()
12021 Primcount = integer()
12022 glDrawTransformFeedbackStreamInstance
12024 See external documentation.
12026 getInternalformativ(Target, Internalformat, Pname, BufSize) -> [inte‐
12028 ger()]
12029 Types:
12031 Target = enum()
12033 Internalformat = enum()
12034 Pname = enum()
12035 BufSize = integer()
12036 glGetInternalformat
12038 See external documentation.
12040 bindImageTexture(Unit, Texture, Level, Layered, Layer, Access, Format)
12042 -> ok
12043 Types:
12045 Unit = integer()
12047 Texture = integer()
12048 Level = integer()
12049 Layered = 0 | 1
12050 Layer = integer()
12051 Access = enum()
12052 Format = enum()
12053 Bind a level of a texture to an image unit
12055 gl:bindImageTexture binds a single level of a texture to an
12057 image unit for the purpose of reading and writing it from
12058 shaders. Unit specifies the zero-based index of the image unit
12059 to which to bind the texture level. Texture specifies the name
12060 of an existing texture object to bind to the image unit. If Tex‐
12061 ture is zero, then any existing binding to the image unit is
12062 broken. Level specifies the level of the texture to bind to the
12063 image unit.
12064 See external documentation.
12066 memoryBarrier(Barriers) -> ok
12068 Types:
12070 Barriers = integer()
12072 Defines a barrier ordering memory transactions
12074 gl:memoryBarrier defines a barrier ordering the memory transac‐
12076 tions issued prior to the command relative to those issued after
12077 the barrier. For the purposes of this ordering, memory transac‐
12078 tions performed by shaders are considered to be issued by the
12079 rendering command that triggered the execution of the shader.
12080 Barriers is a bitfield indicating the set of operations that are
12081 synchronized with shader stores; the bits used in Barriers are
12082 as follows:
12083 See external documentation.
12085 texStorage1D(Target, Levels, Internalformat, Width) -> ok
12087 Types:
12089 Target = enum()
12091 Levels = integer()
12092 Internalformat = enum()
12093 Width = integer()
12094 Simultaneously specify storage for all levels of a one-dimen‐
12096 sional texture
12097 gl:texStorage1D specifies the storage requirements for all lev‐
12099 els of a one-dimensional texture simultaneously. Once a texture
12100 is specified with this command, the format and dimensions of all
12101 levels become immutable unless it is a proxy texture. The con‐
12102 tents of the image may still be modified, however, its storage
12103 requirements may not change. Such a texture is referred to as an
12104 immutable-format texture.
12105 See external documentation.
12107 texStorage2D(Target, Levels, Internalformat, Width, Height) -> ok
12109 Types:
12111 Target = enum()
12113 Levels = integer()
12114 Internalformat = enum()
12115 Width = integer()
12116 Height = integer()
12117 Simultaneously specify storage for all levels of a two-dimen‐
12119 sional or one-dimensional array texture
12120 gl:texStorage2D specifies the storage requirements for all lev‐
12122 els of a two-dimensional texture or one-dimensional texture
12123 array simultaneously. Once a texture is specified with this com‐
12124 mand, the format and dimensions of all levels become immutable
12125 unless it is a proxy texture. The contents of the image may
12126 still be modified, however, its storage requirements may not
12127 change. Such a texture is referred to as an immutable-format
12128 texture.
12129 See external documentation.
12131 texStorage3D(Target, Levels, Internalformat, Width, Height, Depth) ->
12133 ok
12134 Types:
12136 Target = enum()
12138 Levels = integer()
12139 Internalformat = enum()
12140 Width = integer()
12141 Height = integer()
12142 Depth = integer()
12143 Simultaneously specify storage for all levels of a three-dimen‐
12145 sional, two-dimensional array or cube-map array texture
12146 gl:texStorage3D specifies the storage requirements for all lev‐
12148 els of a three-dimensional, two-dimensional array or cube-map
12149 array texture simultaneously. Once a texture is specified with
12150 this command, the format and dimensions of all levels become
12151 immutable unless it is a proxy texture. The contents of the
12152 image may still be modified, however, its storage requirements
12153 may not change. Such a texture is referred to as an immutable-
12154 format texture.
12155 See external documentation.
12157 depthBoundsEXT(Zmin, Zmax) -> ok
12159 Types:
12161 Zmin = clamp()
12163 Zmax = clamp()
12164 glDepthBoundsEXT
12166 See external documentation.
12168 stencilClearTagEXT(StencilTagBits, StencilClearTag) -> ok
12170 Types:
12172 StencilTagBits = integer()
12174 StencilClearTag = integer()
12175 glStencilClearTagEXT
12177 See external documentation.
12179
12181 <>
12182 wx 1.8.7 gl(3)