1RateLimit(3) User Contributed Perl Documentation RateLimit(3)
2
6 CGI::Application::Plugin::RateLimit - limits runmode call rate per user
7
9 use CGI::Application::Plugin::RateLimit;
10 sub setup {
12 ...
13 # call this in your setup routine to set
15 my $rate_limit = $self->rate_limit();
16 # set the database handle to use
18 $rate_limit->dbh($dbh);
19 # set the table name to use for storing hits, the default is
21 # 'rate_limit_hits'
22 $rate_limit->table('rate_limit_hits');
23 # keep people from calling 'send' more often than 5 times in 10
25 # minutes and 'list' more often than once every 5 seconds.
26 $rate_limit->protected_modes(send => {timeframe => '10m',
27 max_hits => 5
28 },
29 list => {timeframe => '5s',
30 max_hits => 1
31 });
32 # you can also protect abstract actions, for example to prevent a
34 # flood of failed logins
35 $rate_limit->protected_actions(failed_login => {timeframe => '10s',
36 max_hits => 2
37 });
38 # call this runmode when a violation is detected
40 $rate_limit->violation_mode('too_fast_buddy');
41 # or, run this callback
43 $rate_limit->violation_callback(sub { die(...) });
44 # override the default identity function
46 # ($ENV{REMOTE_USER} || $ENV{REMOTE_IP})
47 $rate_limit->identity_callback(sub { ... });
48 }
49 # record a hit for an action (not needed for run-modes which are
51 # handled automatically)
52 $rate_limit->record_hit(action => 'failed_login');
53 # check for a violation on an action and handle
55 return $self->slow_down_buddy
56 if( $rate_limit->check_violation(action => 'failed_login') );
57 # revoke the most recent hit for this user, preventing it from
59 # counting towards a violation
60 $rate_limit->revoke_hit();
61 # examine the violation in violation_mode or violation_callback:
63 $mode = $rate_limit->violated_mode;
64 $action = $rate_limit->violated_action;
65 $limits = $rate_limit->violated_limits;
66
68 This module provides protection against a user calling a runmode too
69 frequently. A typical use-case might be a contact form that sends
70 email. You'd like to allow your users to send you messages, but
71 thousands of messages from a single user would be a problem.
72 This module works by maintaining a database of hits to protected
74 runmodes. It then checks this database to determine if a new hit
75 should be allowed based on past activity by the user. The user's
76 identity is, by default, tied to login (via REMOTE_USER) or IP address
77 (via REMOTE_IP) if login info is not available. You may provide your
78 own identity function via the identity_callback() method.
79 To use this module you must create a table in your database with the
81 following schema (using MySQL-syntax, although other DBs may work as
82 well with minor alterations):
83 CREATE TABLE rate_limit_hits (
85 user_id VARCHAR(255) NOT NULL,
86 action VARCHAR(255) NOT NULL,
87 timestamp UNSIGNED INTEGER NOT NULL,
88 INDEX (user_id, action, timestamp)
89 );
90 You may feel free to vary the storage-type and size of user_id and
92 action to match your usage. For example, if your identity_callback()
93 always returns an integer you could make user_id an integer column.
94 This table should be periodically cleared of old data. Anything older
96 than the maximum timeframe being used can be safely deleted.
97 IMPORTANT NOTE: The protection offered by this module is not perfect.
99 Identifying a user on the internet is very hard and a sophisticated
100 attacker can work around these checks, by switching IPs or automating
101 login creation.
102
104 The object returned from calling "$self->rate_limit" on your CGI::App
105 object supports the following method calls:
106 dbh
108 $rate_limit->dbh($dbh);
109 Call this to set the database handle the object should use. Must be
111 set in setup().
112 table
114 $rate_limit->table('some_table_name');
115 Call this to determine the table to be used to store and lookup hits.
117 The default is 'rate_limit_hits' if not set. See the DESCRIPTION
118 section for the required table schema.
119 protected_modes
121 $rate_limit->protected_modes(send => {timeframe => '10m',
122 max_hits => 5
123 },
124 list => {timeframe => '5s',
125 max_hits => 1
126 });
127 Takes a list of key-value pairs describing the modes to protect. Keys
129 are names of run-modes. Values are hashes with the following keys:
130 timeframe - the timeframe to be considered for violations. Values
132 must be numbers followed by either 's' for seconds, 'm' for minutes
133 or 'h' for hours.
134 max_hits - how many hits to allow in the specified timeframe before
136 triggering a violation.
137 protected_actions
139 $rate_limit->protected_actions(failed_login => {timeframe => '10s',
140 max_hits => 2
141 });
142 Specifies non-run-mode actions to protect. These are arbitrary keys
144 you can use with record_hit() and check_violation(). Takes the same
145 data-structure as protected_modes().
146 violation_mode
148 $rate_limit->violation_mode('too_fast_buddy');
149 Call to set a run-mode to call when a violation is triggered. Either
151 this or violation_callback must be set.
152 violation_callback
154 $rate_limit->violation_callback(sub { ... });
155 Callback to call when a violation is detected. Should either throw an
157 exception or return the run-mode to run. Called with the CGI::App
158 object as its sole parameter.
159 identity_callback
161 $rate_limit->identity_callback(sub { ... });
162 Call this to provide a customized mechanism for determining the
164 identity of the user. The default is:
165 sub { $ENV{REMOTE_USER} || $ENV{REMOTE_IP} }
167 You might consider adding in session-ID or a hook to your
169 authentication system if it doesn't use REMOTE_USER. Whatever you
170 write should return a single scalar which is expected to be unique to
171 each user.
172 record_hit
174 $rate_limit->record_hit(action => 'failed_login');
175 Record a hit for an arbitrary action. This is not needed for run-mode
177 protection. Takes the action name as an argument, which must match an
178 action registered with protected_actions().
179 check_violation
181 return $self->slow_down_buddy
182 if( $rate_limit->check_violation(action => 'failed_login') );
183 Checks for a violation of a protected action. This is not needed for
185 run-mode protection. Takes the action name as an argument, which must
186 match an action registered with protected_actions().
187 Returns 1 if a violation took place, 0 otherwise.
189 revoke_hit
191 $rate_limit->revoke_hit();
192 Revokes the last hit for this user. You might use this to prevent
194 validation errors from counting against a user, for example.
195 violated_mode
197 $mode = $rate_limit->violated_mode;
198 Returns the mode for the last violation, or undef if an action caused
200 the violation.
201 violated_action
203 $mode = $rate_limit->violated_action;
204 Returns the action for the last violation, or undef if an action caused
206 the violation.
207 violated_limits
209 $limits = $rate_limit->violated_limits;
210 Returns the hash-ref passed to protected_actions() or protected_modes()
212 for the violated mode/action.
213
215 I've tested this module with MySQL and SQLite. I think it's likely to
216 work with many other databases - please let me know if you try one.
217
219 Please send questions and suggestions about this module to the
220 CGI::Application mailing-list. To join the mailing list, simply send a
221 blank message to:
222 cgiapp-subscribe@lists.erlbaum.net
224
226 This module is in a public Subversion repository at SourceForge here:
227 https://svn.sourceforge.net/svnroot/html-template/trunk/CGI-Application-Plugin-RateLimit
229
231 I know of no bugs. If you find one, let me know by filing a report on
232 http://rt.cpan.org. Failing that, you can email me at sam@tregar.com.
233 Please include the version of the module you're using and small test
234 case demonstrating the problem.
235
237 Sam Tregar, sam@plusthree.com
238
240 Copyright (C) 2006 by Sam Tregar
241 This library is free software; you can redistribute it and/or modify it
243 under the same terms as Perl itself, either Perl version 5.8.6 or, at
244 your option, any later version of Perl 5 you may have available.
245perl v5.28.1 2006-05-04 RateLimit(3)