1Net::SSH2(3) User Contributed Perl Documentation Net::SSH2(3)
2
6 Net::SSH2 - Support for the SSH 2 protocol via libssh2.
7
9 use Net::SSH2;
10 my $ssh2 = Net::SSH2->new();
12 $ssh2->connect('example.com') or $ssh2->die_with_error;
14 $ssh->check_hostkey('ask') or $ssh2->die_with_error;
16 if ($ssh2->auth_keyboard('fizban')) {
18 my $chan = $ssh2->channel();
19 $chan->exec('program');
20 my $sftp = $ssh2->sftp();
22 my $fh = $sftp->open('/etc/passwd') or $sftp->die_with_error;
23 print $_ while <$fh>;
24 }
25
27 Net::SSH2 is a Perl interface to the libssh2 (<http://www.libssh2.org>)
28 library. It supports the SSH2 protocol (there is no support for SSH1)
29 with all of the key exchanges, ciphers, and compression of libssh2.
30 Even if the module can be compiled and linked against very old versions
32 of the library, nothing below 1.5.0 should really be used (older
33 versions were quite buggy and unreliable) and version 1.7.0 or later is
34 recommended.
35 Error handling
37 Unless otherwise indicated, methods return a true value on success and
38 "undef" on failure; use the "error" method to get extended error
39 information.
40 Important: methods in Net::SSH2 not backed by libssh2 functions (i.e.
42 "check_hostkey" or SCP related methods) require libssh2 1.7.0 or later
43 in order to set the error state. That means that after any of those
44 methods fails, "error" would not return the real code but just some
45 bogus result when an older version of the library is used.
46 Typical usage
48 The typical usage order is as follows:
49 1. Create the SSH2 object calling "new".
51 2. Configure the session if required. For instance, enabling
53 compression or picking some specific encryption methods.
54 3. Establish the SSH connection calling the method "connect".
56 4. Check the remote host public key calling "check_hostkey".
58 5. Authenticate calling the required authentication methods.
60 6. Call "channel" and related methods to create new bidirectional
62 communication channels over the SSH connection.
63 7. Close the connection letting the Net::SSH2 object go out of scope
65 or calling "disconnect" explicitly.
66
68 All the constants defined in libssh2 can be imported from Net::SSH2.
69 For instance:
71 use Net::SSH2 qw(LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE
73 LIBSSH2_CHANNEL_FLUSH_ALL
74 LIBSSH2_HOSTKEY_POLICY_ASK);
75 Though note that most methods accept the uncommon part of the constant
77 name as a string. For instance the following two method calls are
78 equivalent:
79 $channel->ext_data(LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE);
81 $channel->ext_data('merge');
82 Tags can be used to import the following constant subsets:
84 callback channel error socket trace hash method
86 disconnect policy fx fxf sftp
87 The tag "all" can also be used to import all of them.
89
91 new ( %options )
92 Create new Net::SSH2 object representing a SSH session.
93 The accepted options are as follows:
95 timeout
97 Sets the default timeout in milliseconds. See "timeout".
98 trace
100 Sets tracing. See "trace".
101 Example:
103 my $ssh2 = Net::SSH2->new(trace => -1);
105 Note that tracing requires a version of libssh2 compiled with
107 debugging support.
108 debug
110 Enable debugging. See "debug".
111 compress
113 Sets flag "LIBSSH2_FLAG_COMPRESS". See "flag".
114 sigpipe
116 Sets flag "LIBSSH2_FLAG_SIGPIPE". See "flag".
117 banner ( text )
119 Set the SSH2 banner text sent to the remote host (prepends required
120 "SSH-2.0-").
121 version
123 In scalar context, returns libssh2 version/patch e.g. 0.18 or
124 "0.18.0-20071110". In list context, returns that version plus the
125 numeric version (major, minor, and patch, each encoded as 8 bits, e.g.
126 0x001200 for version 0.18) and the default banner text (e.g.
127 "SSH-2.0-libssh2_0.18.0-20071110").
128 error
130 Returns the last error code. In list context, returns (code, error
131 name, error string).
132 Note that the returned error value is only meaningful after some other
134 method indicates an error by returning false.
135 die_with_error ( [message] )
137 Calls "die" with the given message and the error information from the
138 object appended.
139 For instance:
141 $ssh2->connect("ajhkfhdklfjhklsjhd", 22)
143 or $ssh2->die_with_error;
144 # dies as:
145 # Unable to connect to remote host: Invalid argument (-1 LIBSSH2_ERROR_SOCKET_NONE)
146 sock
148 Returns a reference to the underlying IO::Socket object (usually a
149 derived class as IO::Socket::IP or IO::Socket::INET), or "undef" if not
150 yet connected.
151 trace
153 Calls "libssh2_trace" with supplied bitmask. In order to enable all
154 tracing pass "-1" as follows:
155 $ssh2->trace(-1);
157 A version of libssh2 compiled with tracing support is required.
159 timeout ( timeout_ms )
161 Enables a global timeout (in milliseconds) which will affect every
162 action (requires libssh2 1.2.9 or later).
163 By default, or if you set the timeout to zero, Net::SSH2 has no
165 timeout.
166 Note that timeout errors may leave the SSH connection in an
168 inconsistent state and further operations may fail or behave
169 incorrectly. Actually, some methods are able to recover after a timeout
170 error and others are not.
171 Don't hesitate to report any issue you encounter related to this so
173 that it can be fixed or at least, documented!
174 method ( type [, values... ] )
176 Sets or gets a method preference. For get, pass in the type only; to
177 set, pass in either a list of values or a comma-separated string.
178 Values can only be queried after the session is connected.
179 The following methods can be set or queried:
181 LIBSSH2_METHOD_KEX
183 Key exchange method names. Supported values:
184 diffie-hellman-group1-sha1
186 Diffie-Hellman key exchange with SHA-1 as hash, and Oakley
187 Group 2 (see RFC 2409).
188 diffie-hellman-group14-sha1
190 Diffie-Hellman key exchange with SHA-1 as hash, and Oakley
191 Group 14 (see RFC 3526).
192 diffie-hellman-group-exchange-sha1
194 Diffie-Hellman key exchange with SHA-1 as hash, using a
195 safe-prime/generator pair (chosen by server) of arbitrary
196 strength (specified by client) (see IETF draft secsh-dh-group-
197 exchange).
198 LIBSSH2_METHOD_HOSTKEY
200 Public key algorithms. Supported values:
201 ssh-dss
203 Based on the Digital Signature Standard (FIPS-186-2).
204 ssh-rsa
206 Based on PKCS#1 (RFC 3447).
207 LIBSSH2_METHOD_CRYPT_CS
209 Encryption algorithm from client to server. Supported algorithms:
210 aes256-cbc
212 AES in CBC mode, with 256-bit key.
213 rijndael-cbc@lysator.liu.se
215 Alias for aes256-cbc.
216 aes192-cbc
218 AES in CBC mode, with 192-bit key.
219 aes128-cbc
221 AES in CBC mode, with 128-bit key.
222 blowfish-cbc
224 Blowfish in CBC mode.
225 arcfour
227 ARCFOUR stream cipher.
228 cast128-cbc
230 CAST-128 in CBC mode.
231 3des-cbc
233 Three-key 3DES in CBC mode.
234 none
236 No encryption.
237 LIBSSH2_METHOD_CRYPT_SC
239 Encryption algorithm from server to client. See the
240 "LIBSSH2_METHOD_CRYPT_CS" entry above for supported algorithms.
241 LIBSSH2_METHOD_MAC_CS
243 Message Authentication Code (MAC) algorithms from client to server.
244 Supported values:
245 hmac-sha1
247 SHA-1 with 20-byte digest and key length.
248 hmac-sha1-96
250 SHA-1 with 20-byte key length and 12-byte digest length.
251 hmac-md5
253 MD5 with 16-byte digest and key length.
254 hmac-md5-96
256 MD5 with 16-byte key length and 12-byte digest length.
257 hmac-ripemd160
259 RIPEMD-160 algorithm with 20-byte digest length.
260 hmac-ripemd160@openssh.com
262 Alias for hmac-ripemd160.
263 none
265 No encryption.
266 LIBSSH2_METHOD_MAC_SC
268 Message Authentication Code (MAC) algorithms from server to client.
269 See LIBSSH2_METHOD_MAC_CS for supported algorithms.
270 LIBSSH2_METHOD_COMP_CS
272 Compression methods from client to server. Supported values:
273 zlib
275 The "zlib" compression method as described in RFC 1950 and RFC
276 1951.
277 none
279 No compression
280 LIBSSH2_METHOD_COMP_SC
282 Compression methods from server to client. See
283 LIBSSH2_METHOD_COMP_CS for supported compression methods.
284 connect ( handle | host [, port])
286 The argument combinations accepted are as follows:
287 a glob or "IO::*" object reference
289 Note that tied file handles are not acceptable. The underlying
290 libssh2 requires real file handles.
291 host [, port]
293 In order to handle IPv6 addresses the optional module
294 IO::Socket::IP is required.
295 The port number defaults to 22.
297 This method used to accept a "Timeout" argument. That feature has been
299 replaced by the constructor "timeout" option but note that it takes
300 milliseconds instead of seconds!
301 disconnect ( [description [, reason [, language]]] )
303 Sends a clean disconnect message to the remote server. Default values
304 are empty strings for description and language, and
305 "SSH_DISCONNECT_BY_APPLICATION" for the reason.
306 hostname
308 The name of the remote host given at connect time or retrieved from the
309 TCP layer.
310 port
312 The port number of the remote SSH server.
313 hostkey_hash ( hash type )
315 Returns a hash of the host key; note that the key is raw data and may
316 contain nulls or control characters.
317 The type may be as follows:
319 LIBSSH2_HOSTKEY_HASH_MD5
321 MD5 hash, 16 bytes long (requires libssh2 compiled with MD5
322 support).
323 LIBSSH2_HOSTKEY_HASH_SHA1
325 SHA1 hash, 20 bytes long.
326 Note: in previous versions of the module this method was called
328 "hostkey".
329 remote_hostkey
331 Returns the public key from the remote host and its type which is one
332 of "LIBSSH2_HOSTKEY_TYPE_RSA", "LIBSSH2_HOSTKEY_TYPE_DSS", or
333 "LIBSSH2_HOSTKEY_TYPE_UNKNOWN".
334 check_hostkey( [policy, [known_hosts_path [, comment] ] ] )
336 Looks for the remote host key inside the given known host file
337 (defaults to "~/.ssh/known_hosts").
338 On success, this method returns the result of the call done under the
340 hood to "Net::SSH2::KnownHost::check" (i.e.
341 "LIBSSH2_KNOWNHOST_CHECK_MATCH", "LIBSSH2_KNOWNHOST_CHECK_FAILURE",
342 "LIBSSH2_KNOWNHOST_CHECK_NOTFOUND" or
343 "LIBSSH2_KNOWNHOST_CHECK_MISMATCH").
344 On failure it returns "undef".
346 The accepted policies are as follows:
348 LIBSSH2_HOSTKEY_POLICY_STRICT
350 Only host keys already present in the known hosts file are
351 accepted.
352 This is the default policy.
354 LIBSSH2_HOSTKEY_POLICY_ASK
356 If the host key is not present in the known hosts file, the user is
357 asked if it should be accepted or not.
358 If accepted, the key is added to the known host file with the given
360 comment.
361 LIBSSH2_HOSTKEY_POLICY_TOFU
363 Trust On First Use: if the host key is not present in the known
364 hosts file, it is added there and accepted.
365 LIBSSH2_HOSTKEY_POLICY_ADVISORY
367 The key is always accepted, but it is never saved into the known
368 host file.
369 callback
371 If a reference to a subroutine is given, it is called when the key
372 is not present in the known hosts file or a different key is found.
373 The arguments passed to the callback are the session object, the
374 matching error ("LIBSSH2_KNOWNHOST_CHECK_FAILURE",
375 "LIBSSH2_KNOWNHOST_CHECK_NOTFOUND" or
376 "LIBSSH2_KNOWNHOST_CHECK_MISMATCH") and the comment.
377 auth_list ( [username] )
379 Returns the authentication methods accepted by the server. In scalar
380 context the methods are returned as a comma separated string.
381 When the server accepted an unauthenticated session for the given
383 username, this method returns "undef" but "auth_ok" returns true.
384 auth_ok
386 Returns true when the session is authenticated.
387 auth_password ( username [, password [, callback ]] )
389 Authenticates using a password.
390 If the password has expired, if a callback code reference was given,
392 it's called as "callback($self, $username)" and should return a
393 password. If no callback is provided, LIBSSH2_ERROR_PASSWORD_EXPIRED
394 is returned.
395 auth_password_interact ( username [, callback])
397 Prompts the user for the password interactively (requires
398 Term::ReadKey).
399 auth_publickey ( username, publickey_path, privatekey_path [, passphrase ]
401 )
402 Authenticate using the given private key and an optional passphrase.
403 When libssh2 is compiled using OpenSSL as the crypto backend, passing
405 this method "undef" as the public key argument is acceptable (OpenSSL
406 is able to extract the public key from the private one).
407 See also "Supported key formats".
409 auth_publickey_frommemory ( username, publickey_blob, privatekey_blob [,
411 passphrase ] )
412 Authenticate using the given public/private key and an optional
413 passphrase. The keys must be PEM encoded (requires libssh2 1.6.0 or
414 later with the OpenSSL backend).
415 auth_hostbased ( username, publickey, privatekey, hostname, [, local
417 username [, passphrase ]] )
418 Host-based authentication using an optional passphrase. The local
419 username defaults to be the same as the remote username.
420 auth_keyboard ( username, password | callback )
422 Authenticate using "keyboard-interactive". Takes either a password, or
423 a callback code reference which is invoked as "callback->(self,
424 username, name, instruction, prompt...)" (where each prompt is a hash
425 with "text" and "echo" keys, signifying the prompt text and whether the
426 user input should be echoed, respectively) which should return an array
427 of responses.
428 If only a username is provided, the default callback will handle
430 standard interactive responses (requires Term::ReadKey)
431 auth_agent ( username )
433 Try to authenticate using an SSH agent (requires libssh2 1.2.3).
434 auth ( ... )
436 This is a general, prioritizing authentication mechanism that can use
437 any of the previous methods. You provide it some parameters and
438 (optionally) a ranked list of methods you want considered (defaults to
439 all). It will remove any unsupported methods or methods for which it
440 doesn't have parameters (e.g. if you don't give it a public key, it
441 can't use publickey or hostkey), and try the rest, returning whichever
442 one succeeded or "undef" if they all failed. If a parameter is passed
443 with an "undef" value, a default value will be supplied if possible.
444 The parameters are:
446 rank
448 An optional ranked list of methods to try. The names should be the
449 names of the Net::SSH2 "auth" methods, e.g. "keyboard" or
450 "publickey", with the addition of "keyboard-auto" for automated
451 "keyboard-interactive" and "password-interact" which prompts the
452 user for the password interactively.
453 username
455 password
456 publickey
457 privatekey
458 "privatekey" and "publickey" are file paths.
459 passphrase
461 hostname
462 local_username
463 interact
464 If this option is set to a true value, interactive methods will be
465 enabled.
466 fallback
468 If a password is given but authentication using it fails, the
469 module will fall back to ask the user for another password if this
470 parameter is set to a true value.
471 cb_keyboard
473 auth_keyboard callback.
474 cb_password
476 auth_password callback.
477 For historical reasons and in order to maintain backward compatibility
479 with older versions of the module, when the "password" argument is
480 given, it is also used as the passphrase (and a deprecation warning
481 generated).
482 In order to avoid that behaviour the "passphrase" argument must be also
484 passed (it could be "undef"). For instance:
485 $ssh2->auth(username => $user,
487 privatekey => $privatekey_path,
488 publickey => $publickey_path,
489 password => $password,
490 passphrase => undef);
491 This work around will be removed in a not too distant future version of
493 the module.
494 flag (key, value)
496 Sets the given session flag.
497 The currently supported flag values are:
499 LIBSSH2_FLAG_COMPRESS
501 If set before the connection negotiation is performed, compression
502 will be negotiated for this connection.
503 Compression can also be enabled passing option "compress" to the
505 constructor new.
506 LIBSSH2_FLAG_SIGPIPE
508 if set, Net::SSH2/libssh2 will not attempt to block SIGPIPEs but
509 will let them trigger from the underlying socket layer.
510 keepalive_config(want_reply, interval)
512 Set how often keepalive messages should be sent.
513 "want_reply" indicates whether the keepalive messages should request a
515 response from the server. "interval" is number of seconds that can pass
516 without any I/O.
517 keepalive_send
519 Send a keepalive message if needed.
520 On failure returns undef. On success returns how many seconds you can
522 sleep after this call before you need to call it again.
523 Note that the underlying libssh2 function "libssh2_keepalive_send" can
525 not recover from EAGAIN errors. If this method fails with such error,
526 the SSH connection may become corrupted.
527 The usage of this function is discouraged.
529 channel ( [type, [window size, [packet size]]] )
531 Creates and returns a new channel object. See Net::SSH2::Channel.
532 Type, if given, must be "session" (a reminiscence of an old, more
534 generic, but never working wrapping).
535 tcpip ( host, port [, shost, sport ] )
537 Creates a TCP connection from the remote host to the given host:port,
538 returning a new channel.
539 The "shost" and "sport" arguments are merely informative and passed to
541 the remote SSH server as the origin of the connection. They default to
542 127.0.0.1:22.
543 Note that this method does not open a new port on the local machine and
545 forwards incoming connections to the remote side.
546 listen ( port [, host [, bound port [, queue size ]]] )
548 Sets up a TCP listening port on the remote host. Host defaults to
549 0.0.0.0; if bound port is provided, it should be a scalar reference in
550 which the bound port is returned. Queue size specifies the maximum
551 number of queued connections allowed before the server refuses new
552 connections.
553 Returns a new Net::SSH2::Listener object.
555 scp_get ( remote_path [, local_path ] )
557 Retrieve a file with SCP. Local path defaults to basename of remote.
558 Alternatively, "local_path" may be an already open file handle or an
560 IO::Handle object (e.g. IO::File, IO::Scalar).
561 scp_put ( local_path [, remote_path ] )
563 Send a file with SCP. Remote path defaults to same as local.
564 Alternatively, "local_path" may be an already open file handle or a
566 reference to a IO::Handle object (it must have a valid stat method).
567 sftp
569 Return SecureFTP interface object (see Net::SSH2::SFTP).
570 Note that SFTP support in libssh2 is pretty rudimentary. You should
572 consider using Net::SFTP::Foreign with the Net::SSH2 backend
573 Net::SFTP::Foreign::Backend::Net_SSH2 instead.
574 public_key
576 Return public key interface object (see Net::SSH2::PublicKey).
577 known_hosts
579 Returns known hosts interface object (see Net::SSH2::KnownHosts).
580 poll ( timeout, arrayref of hashes )
582 Deprecated: the poll functionality in libssh2 is deprecated and its
583 usage disregarded. Session methods "sock" and "block_directions" can be
584 used instead to integrate Net::SSH2 inside an external event loop.
585 Pass in a timeout in milliseconds and an arrayref of hashes with the
587 following keys:
588 handle
590 May be a Net::SSH2::Channel or Net::SSH2::Listener object, integer
591 file descriptor, or perl file handle.
592 events
594 Requested events. Combination of LIBSSH2_POLLFD_* constants (with
595 the POLL prefix stripped if present), or an arrayref of the names
596 ('in', 'hup' etc.).
597 revents
599 Returned events. Returns a hash with the (lowercased) names of the
600 received events ('in', 'hup', etc.) as keys with true values, and a
601 "value" key with the integer value.
602 Returns undef on error, or the number of active objects.
604 block_directions
606 Get the blocked direction after some method returns
607 "LIBSSH2_ERROR_EAGAIN".
608 Returns "LIBSSH2_SESSION_BLOCK_INBOUND" or/and
610 "LIBSSH2_SESSION_BLOCK_OUTBOUND".
611 debug ( state )
613 Class method (affects all Net::SSH2 objects).
614 Pass 1 to enable, 0 to disable. Debug output is sent to "STDERR".
616 blocking ( flag )
618 Enable or disable blocking.
619 A good number of the methods in "Net::SSH2"/"libssh2" can not work in
621 non-blocking mode. Some of them may just forcibly enable blocking
622 during its execution. A few may even corrupt the SSH session or crash
623 the program.
624 The ones that can be safely called are "read" and, with some caveats,
626 "write". See "write" in Net::SSH2::Channel.
627 Don't hesitate to report any bug you found in that area!
629
631 Protocol versions
632 The underlaying "libssh2" library does support version 2 of the SSH
633 protocol exclusively (hopefully, version 1 usage is almost extinct).
634 The SFTP client implements version 3 of the SFTP protocol.
636 Key formats
638 Private and public keys can be generated and stored using different
639 formats and cyphers. Which ones are accepted by "Net::SSH2" depends on
640 the libssh2 version being used and of the underlying crypto backend
641 (OpenSSL "libssl" or "libgcrypt") it was configured to use at build
642 time.
643 An increassingly common problem is that OpenSSH since version 7.8
645 (released 2018-8-24) generates keys by default using the format RFC4716
646 which is not supported by "libssl", the default crypto backend.
647 Keys can be converted inplace to the old PEM format using ssh-keygen(1)
649 as follows:
650 $ ssh-keygen -p -m PEM -N "" -f ~/.ssh/id_rsa
652 On Windows, PuTTYgen (which is part of the PuTTY distribution) can be
654 used to convert keys.
655 Another common issue is that in the last years OpenSSH has incorporated
657 several new cyphers that are not supported by any version of "libssh2"
658 yet (though the incomming 1.8.1 may aliviate the situation). Currently
659 the best option from an interoperability standpoint is probably to
660 stick to RSA key usage.
661 Security
663 Nowadays "libssh2" development is not thrilling; new versions (even
664 minor ones) are being released just every two or three years. On the
665 other hand security issues are found and reported far more frequently.
666 That means that "Net::SSH2"/"libssh2" could be an easy attack vector.
667 So, Net::SSH2 must be used with care only in trusted environments.
669 More specifically, using it to connect to untrusted third party
671 computers over the Internet may be a very bad idea!
672
674 Net::SSH2::Channel, Net::SSH2::Listener, Net::SSH2::SFTP,
675 Net::SSH2::File, Net::SSH2::Dir.
676 LibSSH2 documentation at <http://www.libssh2.org>.
678 IETF Secure Shell (secsh) working group at
680 <http://www.ietf.org/html.charters/secsh-charter.html>.
681 Net::SSH::Any and Net::SFTP::Foreign integrate nicely with Net::SSH2.
683 Other Perl modules related to SSH you may find interesting:
685 Net::OpenSSH, Net::SSH::Perl, Net::OpenSSH::Parallel,
686 Net::OpenSSH::Compat.
687
689 Copyright (C) 2005 - 2010 by David B. Robins (dbrobins@cpan.org).
690 Copyright (C) 2010 - 2016 by Rafael Kitover (rkitover@cpan.org).
692 Copyright (C) 2011 - 2019 by Salvador Fandiño (salva@cpan.org).
694 All rights reserved.
696 This library is free software; you can redistribute it and/or modify it
698 under the same terms as Perl itself, either Perl version 5.8.0 or, at
699 your option, any later version of Perl 5 you may have available.
700perl v5.28.1 2019-03-17 Net::SSH2(3)