1Pdlpp(3) User Contributed Perl Documentation Pdlpp(3)
2
6 Inline::Pdlpp - Write PDL Subroutines inline with PDL::PP
7
9 "Inline::Pdlpp" is a module that allows you to write PDL subroutines in
10 the PDL::PP style. The big benefit compared to plain "PDL::PP" is that
11 you can write these definitions inline in any old perl script (without
12 the normal hassle of creating Makefiles, building, etc). Since version
13 0.30 the Inline module supports multiple programming languages and each
14 language has its own support module. This document describes how to use
15 Inline with PDL::PP (or rather, it will once these docs are complete
16 ";)".
17 For more information on Inline in general, see Inline.
19 Some example scripts demonstrating "Inline::Pdlpp" usage can be found
21 in the Example/InlinePdlpp directory.
22 "Inline::Pdlpp" is a subclass of Inline::C. Most Kudos goes to Brian I.
24
26 You never actually use "Inline::Pdlpp" directly. It is just a support
27 module for using "Inline.pm" with "PDL::PP". So the usage is always:
28 use Inline Pdlpp => ...;
30 or
32 bind Inline Pdlpp => ...;
34
36 Pending availability of full docs a few quick examples that illustrate
37 typical usage.
38 A simple example
40 # example script inlpp.pl
41 use PDL; # must be called before (!) 'use Inline Pdlpp' calls
42 use Inline Pdlpp; # the actual code is in the __Pdlpp__ block below
44 $a = sequence 10;
46 print $a->inc,"\n";
47 print $a->inc->dummy(1,10)->tcumul,"\n";
48 __DATA__
50 __Pdlpp__
52 pp_def('inc',
54 Pars => 'i();[o] o()',
55 Code => '$o() = $i() + 1;',
56 );
57 pp_def('tcumul',
59 Pars => 'in(n);[o] mul()',
60 Code => '$mul() = 1;
61 loop(n) %{
62 $mul() *= $in();
63 %}',
64 );
65 # end example script
66 If you call this script it should generate output similar to this:
68 prompt> perl inlpp.pl
70 Inline running PDL::PP version 2.2...
71 [1 2 3 4 5 6 7 8 9 10]
72 [3628800 3628800 3628800 3628800 3628800 3628800 3628800 3628800 3628800 3628800]
73 Usage of "Inline::Pdlpp" in general is similar to "Inline::C". In the
75 absence of full docs for "Inline::Pdlpp" you might want to compare
76 Inline::C.
77 Code that uses external libraries, etc
79 The script below is somewhat more complicated in that it uses code from
80 an external library (here from Numerical Recipes). All the relevant
81 information regarding include files, libraries and boot code is
82 specified in a config call to "Inline". For more experienced Perl
83 hackers it might be helpful to know that the format is similar to that
84 used with ExtUtils::MakeMaker. The keywords are largely equivalent to
85 those used with "Inline::C". Please see below for further details on
86 the usage of "INC", "LIBS", "AUTO_INCLUDE" and "BOOT".
87 use PDL; # this must be called before (!) 'use Inline Pdlpp' calls
89 use Inline Pdlpp => Config =>
91 INC => "-I$ENV{HOME}/include",
92 LIBS => "-L$ENV{HOME}/lib -lnr -lm",
93 # code to be included in the generated XS
94 AUTO_INCLUDE => <<'EOINC',
95 #include <math.h>
96 #include "nr.h" /* for poidev */
97 #include "nrutil.h" /* for err_handler */
98 static void nr_barf(char *err_txt)
100 {
101 fprintf(stderr,"Now calling croak...\n");
102 croak("NR runtime error: %s",err_txt);
103 }
104 EOINC
105 # install our error handler when loading the Inline::Pdlpp code
106 BOOT => 'set_nr_err_handler(nr_barf);';
107 use Inline Pdlpp; # the actual code is in the __Pdlpp__ block below
109 $a = zeroes(10) + 30;;
111 print $a->poidev(5),"\n";
112 __DATA__
114 __Pdlpp__
116 pp_def('poidev',
118 Pars => 'xm(); [o] pd()',
119 GenericTypes => [L,F,D],
120 OtherPars => 'long idum',
121 Code => '$pd() = poidev((float) $xm(), &$COMP(idum));',
122 );
123
125 For information on how to specify Inline configuration options, see
126 Inline. This section describes each of the configuration options
127 available for Pdlpp. Most of the options correspond either to MakeMaker
128 or XS options of the same name. See ExtUtils::MakeMaker and perlxs.
129 AUTO_INCLUDE
131 Specifies extra statements to automatically included. They will be
132 added onto the defaults. A newline char will be automatically added.
133 Does essentially the same as a call to "pp_addhdr". For short bits of
134 code "AUTO_INCLUDE" is probably syntactically nicer.
135 use Inline Pdlpp => Config => AUTO_INCLUDE => '#include "yourheader.h"';
137 BLESS
139 Same as "pp_bless" command. Specifies the package (i.e. class) to which
140 your new pp_defed methods will be added. Defaults to "PDL" if omitted.
141 use Inline Pdlpp => Config => BLESS => 'PDL::Complex';
143 BOOT
145 Specifies C code to be executed in the XS BOOT section. Corresponds to
146 the XS parameter. Does the same as the "pp_add_boot" command. Often
147 used to execute code only once at load time of the module, e.g. a
148 library initialization call.
149 CC
151 Specify which compiler to use.
152 CCFLAGS
154 Specify extra compiler flags.
155 INC
157 Specifies an include path to use. Corresponds to the MakeMaker
158 parameter.
159 use Inline Pdlpp => Config => INC => '-I/inc/path';
161 LD
163 Specify which linker to use.
164 LDDLFLAGS
166 Specify which linker flags to use.
167 NOTE: These flags will completely override the existing flags, instead
169 of just adding to them. So if you need to use those too, you must
170 respecify them here.
171 LIBS
173 Specifies external libraries that should be linked into your code.
174 Corresponds to the MakeMaker parameter.
175 use Inline Pdlpp => Config => LIBS => '-lyourlib';
177 or
179 use Inline Pdlpp => Config => LIBS => '-L/your/path -lyourlib';
181 MAKE
183 Specify the name of the 'make' utility to use.
184 MYEXTLIB
186 Specifies a user compiled object that should be linked in. Corresponds
187 to the MakeMaker parameter.
188 use Inline Pdlpp => Config => MYEXTLIB => '/your/path/yourmodule.so';
190 OPTIMIZE
192 This controls the MakeMaker OPTIMIZE setting. By setting this value to
193 '-g', you can turn on debugging support for your Inline extensions.
194 This will allow you to be able to set breakpoints in your C code using
195 a debugger like gdb.
196 TYPEMAPS
198 Specifies extra typemap files to use. Corresponds to the MakeMaker
199 parameter.
200 use Inline Pdlpp => Config => TYPEMAPS => '/your/path/typemap';
202 NOISY
204 Show the output of any compilations going on behind the scenes. Turns
205 on "BUILD_NOISY" in Inline::C.
206
208 "do"ing inline scripts
209 Beware that there is a problem when you use the __DATA__ keyword style
210 of Inline definition and want to "do" your script containing inlined
211 code. For example
212 # myscript.pl contains inlined code
214 # in the __DATA__ section
215 perl -e 'do "myscript.pl";'
216 One or more DATA sections were not processed by Inline.
217 According to Brian Ingerson (of Inline fame) the workaround is to
219 include an "Inline->init" call in your script, e.g.
220 use PDL;
222 use Inline Pdlpp;
223 Inline->init;
224 # perl code
226 __DATA__
228 __Pdlpp__
229 # pp code
231 "PDL::NiceSlice" and "Inline::Pdlpp"
233 There is currently an undesired interaction between PDL::NiceSlice and
234 "Inline::Pdlpp". Since PP code generally contains expressions of the
235 type "$var()" (to access piddles, etc) PDL::NiceSlice recognizes those
236 incorrectly as slice expressions and does its substitutions. For the
237 moment (until hopefully the parser can deal with that) it is best to
238 explicitly switch PDL::NiceSlice off before the section of inlined
239 Pdlpp code. For example:
240 use PDL::NiceSlice;
242 use Inline::Pdlpp;
243 $a = sequence 10;
245 $a(0:3)++;
246 $a->inc;
247 no PDL::NiceSlice;
249 __DATA__
251 __C__
253 ppdef (...); # your full pp definition here
255
257 Brian Ingerson for creating the Inline infrastructure.
258
260 Christian Soeller <soellermail@excite.com>
261
263 PDL
264 PDL::PP
266 Inline
268 Inline::C
270
272 Copyright (c) 2001. Christian Soeller. All rights reserved.
273 This program is free software; you can redistribute it and/or modify it
275 under the same terms as PDL itself.
276 See http://pdl.perl.org
278perl v5.28.1 2018-05-05 Pdlpp(3)