1AX25RTCTL(8)               Linux Programmer's Manual              AX25RTCTL(8)
2
3
4

NAME

6       ax25rtctl - AX.25 routing control program
7

SYNOPSIS

9       ax25rtctl [options]
10

DESCRIPTION

12       ax25rtctl is a program to control ax25rtd. There are several options:
13
14       -a, --add ax25 <callsign> <dev> <time> [digipeater]
15              Add  an  entry  to  the AX.25 routing table. If time is "0" this
16              entry will be marked permanent, hence: the daemon will not over‐
17              write this route.
18
19       -d, --del ax25 <callsign> <dev>
20              Remove an entry from the AX.25 routing table.
21
22       -a, --add ip <ip> <dev> <time> <call> <ipmode>
23              Add  an  entry to the IP routing table. If time is "0" the entry
24              will be marked permanent.
25
26       -d, --del ip <ip>
27              Remove an entry from the IP routing table.
28
29       -l, --list ax25
30              Lists the content of the cache for the AX.25 routing table.
31
32       -l, --list ip
33              Lists the content of the cache for the IP routing table.
34
35       -e, --expire <minutes>
36              Removes the entries older than <minutes> from the caches and the
37              kernel routing tables.
38
39       -s, --save
40              Saves  the  AX.25  and IP cache to /var/ax25/ax25rtd/ax25_routes
41              and  /var/ax25/ax25rtd/ip_routes  (or  the  files  specified  in
42              /etc/ax25/ax25rtd.conf).
43
44       -r, --reload
45              Reloads  the config file /etc/ax25/ax25rtd.conf. This will *not*
46              affect the caches or the heard list.
47
48       -q, --shutdown
49              Same as 'killall -TERM ax25rtd' ;-)
50
51       -V, --version
52              Prints version.
53
54       Note that  you  can  specify  either  the  port  name  (as  defined  in
55       /etc/ax25/axports)  or the interface name (shown by ifconfig). If names
56       conflict (i.e. port scc0 is in fact interface scc3,  and  vica  versa),
57       the interface name has precedence over the port name.  Example:
58
59          ax25rtctl --add ax25 dl0tha scc3 0 db0pra
60
61       is equivalent to
62
63          ax25rtctl --add ax25 dl0tha 9k6 0 dbpra
64
65       All  commands  return  port  names  in  their output, though.  With one
66       exception: ax25_routes and ip_routes use interface names.
67
68

FILES

70       /etc/ax25/ax25rtd.conf
71

SEE ALSO

73       ax25rtd.conf(5), ax25rtd(8).
74

AUTHORS

76       Joerg Reuter <jreuter@poboxes.com>
77       Llaus Kudielka OE1KIB
78
79
80
81Linux                          11 November 2003                   AX25RTCTL(8)