1REISERFSCK(8) System Manager's Manual REISERFSCK(8)
2
3
4
6 reiserfsck - The checking tool for the ReiserFS filesystem.
7
9 reiserfsck [ -aprVy ] [ --rebuild-sb | --check | --fix-fixable |
10 --rebuild-tree | --clean-attributes ] [ -j | --journal device ] [ -z |
11 --adjust-size ] [ -n | --nolog ] [ -B | --badblocks file ] [ -l |
12 --logfile file ] [ -q | --quiet ] [ -y | --yes ] [ -f | --force ] [ -S
13 | --scan-whole-partition ] [ --no-journal-available ] device
14
16 Reiserfsck searches for a Reiserfs filesystem on a device, replays any
17 necessary transactions, and either checks or repairs the file system.
18
19 device is the special file corresponding to a device or to a partition
20 (e.g /dev/hdXX for an IDE disk partition or /dev/sdXX for a SCSI
21 disk partition).
22
24 --rebuild-sb
25 This option recovers the superblock on a Reiserfs partition.
26 Normally you only need this option if mount reports
27 "read_super_block: can't find a reiserfs file system" and you
28 are sure that a Reiserfs file system is there. But remember that
29 if you have used some partition editor program and now you can‐
30 not find a filesystem, probably something has gone wrong while
31 repartitioning and the start of the partition has been changed.
32 If so, instead of rebuilding the super block on a wrong place
33 you should find the correct start of the partition first.
34
35 --check
36 This default action checks filesystem consistency and reports,
37 but does not repair any corruption that it finds. This option
38 may be used on a read-only file system mount.
39
40 --fix-fixable
41 This option recovers certain kinds of corruption that do not
42 require rebuilding the entire file system tree (--rebuild-tree).
43 Normally you only need this option if the --check option reports
44 "corruption that can be fixed with --fix-fixable". This
45 includes: zeroing invalid data-block pointers, correcting
46 st_size and st_blocks for directories, and deleting invalid
47 directory entries.
48
49 --rebuild-tree
50 This option rebuilds the entire filesystem tree using leaf nodes
51 found on the device. Normally you only need this option if the
52 reiserfsck --check reports "Running with --rebuild-tree is
53 required". You are strongly encouraged to make a backup copy of
54 the whole partition before attempting the --rebuild-tree option.
55 Once reiserfsck --rebuild-tree is started it must finish its
56 work (and you should not interrupt it), otherwise the filesystem
57 will be left in the unmountable state to avoid subsequent data
58 corruptions.
59
60 --clean-attributes
61 This option cleans reserved fields of Stat-Data items. There
62 were days when there were no extended attributes in reiserfs.
63 When they were implemented old partitions needed to be cleaned
64 first -- reiserfs code in the kernel did not care about not used
65 fields in its strutures. Thus if you have used one of the old
66 (pre-attrbutes) kernels with a ReiserFS filesystem and you want
67 to use extented attribues there, you should clean the filesystem
68 first.
69
70 --journal device , -j device
71 This option supplies the device name of the current file system
72 journal. This option is required when the journal resides on a
73 separate device from the main data device (although it can be
74 avoided with the expert option --no-journal-available).
75
76 --adjust-size, -z
77 This option causes reiserfsck to correct file sizes that are
78 larger than the offset of the last discovered byte. This
79 implies that holes at the end of a file will be removed. File
80 sizes that are smaller than the offset of the last discovered
81 byte are corrected by --fix-fixable.
82
83 --badblocks file, -B file
84 This option sets the badblock list to be the list of blocks
85 specified in the given `file`. The filesystem badblock list is
86 cleared before the new list is added. It can be used with --fix-
87 fixable to fix the list of badblocks (see debugreiserfs -B). If
88 the device has bad blocks, every time it must be given with the
89 --rebuild-tree option.
90
91 --logfile file, -l file
92 This option causes reiserfsck to report any corruption it finds
93 to the specified log file rather than to stderr.
94
95 --nolog, -n
96 This option prevents reiserfsck from reporting any kinds of cor‐
97 ruption.
98
99 --quiet, -q
100 This option prevents reiserfsck from reporting its rate of
101 progress.
102
103 --yes, -y
104 This option inhibits reiserfsck from asking you for confirmation
105 after telling you what it is going to do. It will assuem you
106 confirm. For safety, it does not work with the --rebuild-tree
107 option.
108
109 -a, -p These options are usually passed by fsck -A during the automatic
110 checking of those partitions listed in /etc/fstab. These options
111 cause reiserfsck to print some information about the specified
112 filesystem, to check if error flags in the superblock are set
113 and to do some light-weight checks. If these checks reveal a
114 corruption or the flag indicating a (possibly fixable) corrup‐
115 tion is found set in the superblock, then reiserfsck switches to
116 the fix-fixable mode. If the flag indicating a fatal corruption
117 is found set in the superblock, then reiserfsck finishes with an
118 error.
119
120 --force, -f
121 Force checking even if the file system seems clean.
122
123 -V This option prints the reiserfsprogs version and then exit.
124
125 -r This option does nothing at all; it is provided only for back‐
126 wards compatibility.
127
129 DO NOT USE THESE OPTIONS UNLESS YOU KNOW WHAT YOU ARE DOING. WE ARE
130 NOT RESPONSIBLE IF YOU LOSE DATA AS A RESULT OF THESE OPTIONS.
131
132 --no-journal-available
133 This option allows reiserfsck to proceed when the journal device
134 is not available. This option has no effect when the journal is
135 located on the main data device. NOTE: after this operation you
136 must use reiserfstune to specify a new journal device.
137
138 --scan-whole-partition, -S
139 This option causes --rebuild-tree to scan the whole partition
140 but not only the used space on the partition.
141
143 1. You think something may be wrong with a reiserfs partition on
144 /dev/hda1 or you would just like to perform a periodic disk check.
145
146 2. Run reiserfsck --check --logfile check.log /dev/hda1. If reiserfsck
147 --check exits with status 0 it means no errors were discovered.
148
149 3. If reiserfsck --check exits with status 1 (and reports about fixable
150 corruptions) it means that you should run reiserfsck --fix-fixable
151 --logfile fixable.log /dev/hda1.
152
153 4. If reiserfsck --check exits with status 2 (and reports about fatal
154 corruptions) it means that you need to run reiserfsck --rebuild-tree.
155 If reiserfsck --check fails in some way you should also run reiserfsck
156 --rebuild-tree, but we also encourage you to submit this as a bug
157 report.
158
159 5. Before running reiserfsck --rebuild-tree, please make a backup of
160 the whole partition before proceeding. Then run reiserfsck --rebuild-
161 tree --logfile rebuild.log /dev/hda1.
162
163 6. If the reiserfsck --rebuild-tree step fails or does not recover what
164 you expected, please submit this as a bug report. Try to provide as
165 much information as possible including your platform and Linux kernel
166 version. We will try to help solve the problem.
167
169 reiserfsck uses the following exit codes:
170 0 - No errors.
171 1 - File system errors corrected.
172 2 - Reboot is needed.
173 4 - File system fatal errors left uncorrected,
174 reiserfsck --rebuild-tree needs to be launched.
175 6 - File system fixable errors left uncorrected,
176 reiserfsck --fix-fixable needs to be launched.
177 8 - Operational error.
178 16 - Usage or syntax error.
179
181 This version of reiserfsck has been written by Vitaly Fertman
182 <vitaly@namesys.com>.
183
185 Please report bugs to the ReiserFS developers <reiserfs-devel@vger.ker‐
186 nel.org>, providing as much information as possible--your hardware,
187 kernel, patches, settings, all printed messages, the logfile; check the
188 syslog file for any related information.
189
191 Faster recovering, signal handling.
192
194 mkreiserfs(8), reiserfstune(8) resize_reiserfs(8), debugreiserfs(8),
195
196
197
198Reiserfsprogs-3.6.25 January 2009 REISERFSCK(8)