1
2FENCE_AGENT(8)              System Manager's Manual             FENCE_AGENT(8)
3
4
5

NAME

7       fence_intelmodular - Fence agent for Intel Modular
8

DESCRIPTION

10       fence_intelmodular is an I/O Fencing agent which can be used with Intel
11       Modular device (tested on Intel MFSYS25, should work  with  MFSYS35  as
12       well).
13
14       Note:  Since  firmware  update  version  2.7,  SNMP v2 write support is
15       removed, and replaced by SNMP v3 support. So agent now has default SNMP
16       version  3.  If you are using older firmware, please supply -d for com‐
17       mand line and snmp_version option for your cluster.conf.
18
19       fence_intelmodular accepts options on the command line as well as  from
20       stdin.  Fenced  sends parameters through stdin when it execs the agent.
21       fence_intelmodular can be run by  itself  with  command  line  options.
22       This  is  useful  for  testing  and  for turning outlets on or off from
23       scripts.
24
25       Vendor URL: http://www.intel.com
26

PARAMETERS

28
29
30       -o, --action=[action]
31              Fencing action (Default Value: reboot)
32
33       -c, --community=[community]
34              Set the community string
35
36       -4, --inet4-only
37              Forces agent to use IPv4 addresses only
38
39       -6, --inet6-only
40              Forces agent to use IPv6 addresses only
41
42       -a, --ip=[ip]
43              IP address or hostname  of  fencing  device  This  parameter  is
44              always required.
45
46       -u, --ipport=[port]
47              TCP/UDP  port  to use for connection with device (Default Value:
48              161)
49
50       -p, --password=[password]
51              Login password or passphrase
52
53       -S, --password-script=[script]
54              Script to run to retrieve password
55
56       -n, --plug=[id]
57              Physical plug  number  on  device,  UUID  or  identification  of
58              machine This parameter is always required.
59
60       -b, --snmp-auth-prot=[prot]
61              Set authentication protocol (MD5|SHA)
62
63       -P, --snmp-priv-passwd=[pass]
64              Set privacy protocol password
65
66       -R, --snmp-priv-passwd-script
67              Script to run to retrieve privacy password
68
69       -B, --snmp-priv-prot=[prot]
70              Set privacy protocol (DES|AES)
71
72       -E, --snmp-sec-level=[level]
73              Set security level (noAuthNoPriv|authNoPriv|authPriv)
74
75       -d, --snmp-version=[version]
76              Specifies SNMP version to use (1|2c|3)
77
78       -l, --username=[name]
79              Login name
80
81       -q, --quiet
82              Disable logging to stderr. Does not affect --verbose or --debug-
83              file or logging to syslog.
84
85       -v, --verbose
86              Verbose mode
87
88       -D, --debug-file=[debugfile]
89              Write debug information to given file
90
91       -V, --version
92              Display version information and exit
93
94       -h, --help
95              Display help and exit
96
97       -C, --separator=[char]
98              Separator for CSV created by 'list' operation (Default Value: ,)
99
100
101       --delay=[seconds]
102              Wait  X  seconds  before  fencing  is started (Default Value: 0)
103
104
105       --login-timeout=[seconds]
106              Wait X seconds for cmd prompt after  login  (Default  Value:  5)
107
108
109       --power-timeout=[seconds]
110              Test  X  seconds  for status change after ON/OFF (Default Value:
111              20)
112
113       --power-wait=[seconds]
114              Wait X seconds after issuing ON/OFF (Default Value: 0)
115
116       --shell-timeout=[seconds]
117              Wait X seconds for cmd prompt  after  issuing  command  (Default
118              Value: 3)
119
120       --retry-on=[attempts]
121              Count of attempts to retry power on (Default Value: 1)
122
123       --snmpget-path=[path]
124              Path to snmpget binary (Default Value: /usr/bin/snmpget)
125
126       --snmpset-path=[path]
127              Path to snmpset binary (Default Value: /usr/bin/snmpset)
128
129       --snmpwalk-path=[path]
130              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)
131
132

ACTIONS

134
135
136       on     Power on machine.
137
138       off    Power off machine.
139
140       reboot Reboot machine.
141
142       status This returns the status of the plug/virtual machine.
143
144       list   List  available  plugs with aliases/virtual machines if there is
145              support for more then one device. Returns N/A otherwise.
146
147       list-status
148              List available plugs with  aliases/virtual  machines  and  their
149              power  state  if it can be obtained without additional commands.
150
151
152       monitor
153              Check the health of fence device
154
155       metadata
156              Display the XML metadata describing this resource.
157
158       manpage
159               The operational behavior of this is not known.
160
161       validate-all
162              Validate if all required parameters are entered.
163
164

STDIN PARAMETERS

166
167
168       action Fencing action (Default Value: reboot)
169
170       community
171              Set the community string
172
173       inet4_only
174              Forces agent to use IPv4 addresses only
175
176       inet6_only
177              Forces agent to use IPv6 addresses only
178
179       ip     IP address or hostname  of  fencing  device  This  parameter  is
180              always required. Obsoletes: ipaddr
181
182       ipport TCP/UDP  port  to use for connection with device (Default Value:
183              161)
184
185       password
186              Login password or passphrase Obsoletes: passwd
187
188       password_script
189              Script to run  to  retrieve  password  Obsoletes:  passwd_script
190
191
192       plug   Physical  plug  number  on  device,  UUID  or  identification of
193              machine This parameter is always required. Obsoletes: port
194
195
196       snmp_auth_prot
197              Set authentication protocol (MD5|SHA)
198
199       snmp_priv_passwd
200              Set privacy protocol password
201
202       snmp_priv_passwd_script
203              Script to run to retrieve privacy password
204
205       snmp_priv_prot
206              Set privacy protocol (DES|AES)
207
208       snmp_sec_level
209              Set security level (noAuthNoPriv|authNoPriv|authPriv)
210
211       snmp_version
212              Specifies SNMP version to use (1|2c|3)
213
214       username
215              Login name Obsoletes: login
216
217       quiet  Disable logging to stderr. Does not affect --verbose or --debug-
218              file or logging to syslog.
219
220       verbose
221              Verbose mode
222
223       debug_file
224              Write debug information to given file Obsoletes: debug
225
226       version
227              Display version information and exit
228
229       help   Display help and exit
230
231       separator
232              Separator for CSV created by 'list' operation (Default Value: ,)
233
234
235       delay  Wait  X  seconds  before  fencing  is started (Default Value: 0)
236
237
238       login_timeout
239              Wait X seconds for cmd prompt after  login  (Default  Value:  5)
240
241
242       power_timeout
243              Test  X  seconds  for status change after ON/OFF (Default Value:
244              20)
245
246       power_wait
247              Wait X seconds after issuing ON/OFF (Default Value: 0)
248
249       shell_timeout
250              Wait X seconds for cmd prompt  after  issuing  command  (Default
251              Value: 3)
252
253       retry_on
254              Count of attempts to retry power on (Default Value: 1)
255
256       snmpget_path
257              Path to snmpget binary (Default Value: /usr/bin/snmpget)
258
259       snmpset_path
260              Path to snmpset binary (Default Value: /usr/bin/snmpset)
261
262       snmpwalk_path
263              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)
264
265
266
267fence_intelmodular (Fence Agent)  2009-10-20                    FENCE_AGENT(8)