1NVME-CONNECT(1) NVMe Manual NVME-CONNECT(1)
2
6 nvme-connect - Connect to a Fabrics controller.
7
9 nvme connect
10 [--transport=<trtype> | -t <trtype>]
11 [--nqn=<subnqn> | -n <subnqn>]
12 [--traddr=<traddr> | -a <traddr>]
13 [--trsvcid=<trsvcid> | -s <trsvcid>]
14 [--host-traddr=<traddr> | -w <traddr>]
15 [--hostnqn=<hostnqn> | -q <hostnqn>]
16 [--hostid=<hostid> | -I <hostid>]
17 [--nr-io-queues=<#> | -i <#>]
18 [--nr-write-queues=<#> | -W <#>]
19 [--nr-poll-queues=<#> | -P <#>]
20 [--queue-size=<#> | -Q <#>]
21 [--keep-alive-tmo=<#> | -k <#>]
22 [--reconnect-delay=<#> | -c <#>]
23 [--ctrl-loss-tmo=<#> | -l <#>]
24 [--duplicate_connect | -D]
25 [--disable_sqflow | -d]
26 [--hdr_digest | -g]
27 [--data_digest | -G]
28
30 Create a transport connection to a remote system (specified by --traddr
31 and --trsvcid) and create a NVMe over Fabrics controller for the NVMe
32 subsystem specified by the --nqn option.
33
35 -t <trtype>, --transport=<trtype>
36 This field specifies the network fabric being used for a
37 NVMe-over-Fabrics network. Current string values include:
38 ┌──────┬────────────────────────────┐
40 │Value │ Definition │
41 ├──────┼────────────────────────────┤
42 │rdma │ The network fabric is an │
43 │ │ rdma network (RoCE, iWARP, │
44 │ │ Infiniband, basic rdma, │
45 │ │ etc) │
46 ├──────┼────────────────────────────┤
47 │fc │ WIP The network fabric is │
48 │ │ a Fibre Channel network. │
49 ├──────┼────────────────────────────┤
50 │loop │ Connect to a NVMe over │
51 │ │ Fabrics target on the │
52 │ │ local host │
53 └──────┴────────────────────────────┘
54 -n <subnqn>, --nqn <subnqn>
56 This field specifies the name for the NVMe subsystem to connect to.
57 -a <traddr>, --traddr=<traddr>
59 This field specifies the network address of the Controller. For
60 transports using IP addressing (e.g. rdma) this should be an
61 IP-based address (ex. IPv4).
62 -s <trsvcid>, --trsvcid=<trsvcid>
64 This field specifies the transport service id. For transports using
65 IP addressing (e.g. rdma) this field is the port number. By
66 default, the IP port number for the RDMA transport is 4420.
67 -w <traddr>, --host-traddr=<traddr>
69 This field specifies the network address used on the host to
70 connect to the Controller.
71 -q <hostnqn>, --hostnqn=<hostnqn>
73 Overrides the default Host NQN that identifies the NVMe Host. If
74 this option is not specified, the default is read from
75 /etc/nvme/hostnqn first. If that does not exist, the autogenerated
76 NQN value from the NVMe Host kernel module is used next. The Host
77 NQN uniquely identifies the NVMe Host.
78 -I <hostid>, --hostid=<hostid>
80 UUID(Universally Unique Identifier) to be discovered which should
81 be formatted.
82 -i <#>, --nr-io-queues=<#>
84 Overrides the default number of I/O queues create by the driver.
85 -W <#>, --nr-write-queues=<#>
87 Adds additional queues that will be used for write I/O.
88 -P <#>, --nr-poll-queues=<#>
90 Adds additional queues that will be used for polling latency
91 sensitive I/O.
92 -Q <#>, --queue-size=<#>
94 Overrides the default number of elements in the I/O queues created
95 by the driver.
96 -k <#>, --keep-alive-tmo=<#>
98 Overrides the default keep alive timeout (in seconds).
99 -c <#>, --reconnect-delay=<#>
101 Overrides the default delay (in seconds) before reconnect is
102 attempted after a connect loss.
103 -l <#>, --ctrl-loss-tmo=<#>
105 Overrides the default controller loss timeout period (in seconds).
106 -D, --duplicate_connect
108 Allows duplicated connections between same trnsport host and
109 subsystem port.
110 -d, --disable_sqflow
112 Disables SQ flow control to omit head doorbell update for
113 submission queues when sending nvme completions.
114 -g, --hdr_digest
116 Generates/verifies header digest (TCP).
117 -G, --data_digest
119 Generates/verifies data digest (TCP).
120
122 · Connect to a subsystem named
123 nqn.2014-08.com.example:nvme:nvm-subsystem-sn-d78432 on the IP4
124 address 192.168.1.3. Port 4420 is used by default:
125 # nvme connect --transport=rdma --traddr=192.168.1.3 \
127 --nqn=nqn.2014-08.com.example:nvme:nvm-subsystem-sn-d78432
128
130 nvme-discover(1) nvme-connect-all(1)
131
133 This was co-written by Jay Freyensee[1] and Christoph Hellwig[2] for
134 Keith Busch[3].
135
137 Part of the nvme-user suite
138
140 1. Jay Freyensee
141 mailto:james.p.freyensee@intel.com
142 2. Christoph Hellwig
144 mailto:hch@lst.de
145 3. Keith Busch
147 mailto:keith.busch@intel.com
148NVMe 04/08/2019 NVME-CONNECT(1)