1UDISKSCTL(1) User Commands UDISKSCTL(1)
2
6 udisksctl - The udisks command line tool
7
9 udisksctl status
10 udisksctl info {--object-path OBJECT | --block-device DEVICE |
12 --drive DRIVE}
13 udisksctl mount {--object-path OBJECT | --block-device DEVICE}
15 [--filesystem-type TYPE] [--options OPTIONS...]
16 [--no-user-interaction]
17 udisksctl unmount {--object-path OBJECT | --block-device DEVICE}
19 [--force] [--no-user-interaction]
20 udisksctl unlock {--object-path OBJECT | --block-device DEVICE}
22 [--no-user-interaction] [--key-file PATH]
23 udisksctl lock {--object-path OBJECT | --block-device DEVICE}
25 [--no-user-interaction]
26 udisksctl loop-setup --file PATH [--read-only] [--offset OFFSET]
28 [--size SIZE] [--no-user-interaction]
29 udisksctl loop-delete {--object-path OBJECT | --block-device DEVICE}
31 [--no-user-interaction]
32 udisksctl power-off {--object-path OBJECT | --block-device DEVICE}
34 [--no-user-interaction]
35 udisksctl smart-simulate --file PATH {--object-path OBJECT |
37 --block-device DEVICE} [--no-user-interaction]
38 udisksctl monitor
40 udisksctl dump
42 udisksctl help
44
46 udisksctl is a command-line program used to interact with the
47 udisksd(8) daemon process.
48
50 status
51 Shows high-level information about disk drives and block devices.
52 info
54 Shows detailed information about OBJECT, DEVICE or DRIVE.
55 mount
57 Mounts a device. The device will be mounted in a subdirectory in
58 the /run/media hierarchy - upon successful completion, the mount
59 point will be printed to standard output.
60 -t, --filesystem-type
62 Filesystem type to use. If not specified, autodetected
63 filesystem type will be used.
64 -o, --options
66 The device will be mounted with a safe set of default options.
67 You can influence the options passed to the mount(8) command
68 using this option. Note that only safe options are allowed -
69 requests with inherently unsafe options such as suid or dev
70 that would allow the caller to gain additional privileges, are
71 rejected.
72 unmount
74 Unmounts a device. This only works if the device is mounted. The
75 option --force can be used to request that the device is unmounted
76 even if active references exists.
77 -f, --force
79 Lazy unmount. Detach the filesystem from the file hierarchy
80 now, and clean up all references to this filesystem as soon as
81 it is not busy anymore.
82 unlock
84 Unlocks an encrypted device. The passphrase will be requested from
85 the controlling terminal and upon successful completion, the
86 cleartext device will be printed to standard output.
87 --key-file=PATH
89 Read passphrase from the given file.
90 lock
92 Locks a device. This only works if the device is a cleartext device
93 backed by a cryptotext device.
94 loop-setup
96 Sets up a loop device backed by FILE.
97 -f, --file=FILE
99 File to set up a loop device for.
100 -r, --read-only
102 Set up a read-only loop device.
103 -o, --offset=OFFSET
105 The data start is moved OFFSET bytes into the specified file.
106 -s, --size=SIZE
108 The data end is set to no more than SIZE bytes after the data
109 start.
110 loop-delete
112 Tears down a loop device.
113 power-off
115 Arranges for the drive to be safely removed and powered off. On the
116 OS side this includes ensuring that no process is using the drive,
117 then requesting that in-flight buffers and caches are committed to
118 stable storage. The exact steps for powering off the drive depends
119 on the drive itself and the interconnect used. For drives connected
120 through USB, the effect is that the USB device will be deconfigured
121 followed by disabling the upstream hub port it is connected to.
122 Note that as some physical devices contain multiple drives (for
124 example 4-in-1 flash card reader USB devices) powering off one
125 drive may affect other drives. As such there are not a lot of
126 guarantees associated with performing this action. Usually the
127 effect is that the drive disappears as if it was unplugged.
128 smart-simulate
130 Sets SMART data from the libatasmart blob given by FILE - see
131 /usr/share/doc/libatasmart-devel-VERSION/ for blobs shipped with
132 libatasmart. This is a debugging feature used to check that
133 applications act correctly when a disk is failing.
134 -f, --file=FILE
136 File with the libatasmart blob.
137 monitor
139 Monitors the daemon for events.
140 dump
142 Prints the current state of the daemon.
143 help
145 Prints help and exit.
146
148 For commands that require a device as an argument following options can
149 be used to specify it.
150 -b, --block-device=DEVICE
152 Specify a device by its device file path. For example /dev/sda.
153 -p, --object-path=OBJECT
155 Specify a device by the UDisks internal object path without the
156 /org/freedesktop/UDisks2 prefix. For example block_devices/sda for
157 the /dev/sda disk.
158 -d, --drive=DRIVE
160 Specify a drive by name, for example VirtIO_Disk. This can be
161 currently used only together with the info command.
162
164 The option --no-user-interaction can be used to request that no
165 interaction (such as the user being presented with an authentication
166 dialog) must occur when checking with polkit(8) whether the caller is
167 authorized to perform the requested action.
168
170 This program does not assume that the caller is the super user - it is
171 intended to be used by unprivileged users and authorizations are
172 checked by the udisks daemon using polkit(8). Additionally, this
173 program is not intended to be used by scripts or other programs -
174 options/commands may change in incompatible ways in the future even in
175 maintenance releases. See the “API STABILITY” section of udisks(8) for
176 more information.
177
179 udisksctl ships with a bash completion script to complete commands,
180 objects, block devices and some options.
181
183 This man page was originally written for UDisks2 by David Zeuthen
184 <zeuthen@gmail.com> with a lot of help from many others.
185
187 Please send bug reports to either the distribution bug tracker or the
188 upstream bug tracker at
189 https://github.com/storaged-project/udisks/issues.
190
192 udisks(8), udisksd(8), umount.udisks2(8), polkit(8)
193udisks 2.8.4 August 2018 UDISKSCTL(1)