1Math::PlanePath::CornerU(s3e)r Contributed Perl DocumentaMtaitohn::PlanePath::Corner(3)
2
6 Math::PlanePath::Corner -- points shaped around in a corner
7
9 use Math::PlanePath::Corner;
10 my $path = Math::PlanePath::Corner->new;
11 my ($x, $y) = $path->n_to_xy (123);
12
14 This path puts points in layers working outwards from the corner of the
15 first quadrant.
16 5 | 26--...
18 |
19 4 | 17--18--19--20--21
20 | |
21 3 | 10--11--12--13 22
22 | | |
23 2 | 5-- 6-- 7 14 23
24 | | | |
25 1 | 2-- 3 8 15 24
26 | | | | | |
27 Y=0 | 1 4 9 16 25
28 +---------------------
29 X=0 1 2 3 4
30 The horizontal 1,4,9,16,etc along Y=0 is the perfect squares. This is
32 since each further row/column "gnomon" added to a square makes a one-
33 bigger square,
34 10 11 12 13
36 5 6 7 5 6 7 14
37 2 3 2 3 8 2 3 8 15
38 1 4 1 4 9 1 4 9 16
39 2x2 3x3 4x4
41 N=2,6,12,20,etc on the diagonal X=Y-1 up from X=0,Y=1 is the pronic
43 numbers k*(k+1) which are half way between the squares.
44 Each gnomon is 2 longer than the previous. This is similar to the
46 "PyramidRows", "PyramidSides" and "SacksSpiral" paths. The "Corner"
47 and the "PyramidSides" are the same but "PyramidSides" is stretched to
48 two quadrants instead of one for the "Corner" here.
49 Wider
51 An optional "wider => $integer" makes the path wider horizontally,
52 becoming a rectangle. For example
53 wider => 3
55 4 | 29--30--31--...
57 |
58 3 | 19--20--21--22--23--24--25
59 | |
60 2 | 11--12--13--14--15--16 26
61 | | |
62 1 | 5---6---7---8---9 17 27
63 | | | |
64 Y=0 | 1---2---3---4 10 18 28
65 |
66 -----------------------------
67 ^
68 X=0 1 2 3 4 5 6
69 Each gnomon has the horizontal part "wider" many steps longer. Each
71 gnomon is still 2 longer than the previous since this widening is a
72 constant amount in each.
73 N Start
75 The default is to number points starting N=1 as shown above. An
76 optional "n_start" can give a different start with the same shape etc.
77 For example to start at 0,
78 n_start => 0
80 5 | 25 ...
82 4 | 16 17 18 19 20
83 3 | 9 10 11 12 21
84 2 | 4 5 6 13 22
85 1 | 1 2 7 14 23
86 Y=0 | 0 3 8 15 24
87 -----------------
88 X=0 1 2 3
89 In Nstart=0 the squares are on the Y axis and the pronic numbers are on
91 the X=Y leading diagonal.
92
94 See "FUNCTIONS" in Math::PlanePath for behaviour common to all path
95 classes.
96 "$path = Math::PlanePath::Corner->new ()"
98 "$path = Math::PlanePath::Corner->new (wider => $w, n_start => $n)"
99 Create and return a new path object.
100 "($x,$y) = $path->n_to_xy ($n)"
102 Return the X,Y coordinates of point number $n on the path.
103 For "$n < n_start()-0.5" the return is an empty list. There's an
105 extra 0.5 before Nstart, but nothing further before there.
106 "$n = $path->xy_to_n ($x,$y)"
108 Return the point number for coordinates "$x,$y".
109 $x and $y are each rounded to the nearest integer, which has the
111 effect of treating each point as a square of side 1, so the
112 quadrant x>=-0.5 and y>=-0.5 is entirely covered.
113 "($n_lo, $n_hi) = $path->rect_to_n_range ($x1,$y1, $x2,$y2)"
115 The returned range is exact, meaning $n_lo and $n_hi are the
116 smallest and biggest in the rectangle.
117
119 N to X,Y
120 Counting d=0 for the first L-shaped gnomon at Y=0, then the start of
121 the gnomon is
122 StartN(d) = d^2 + 1 = 1,2,5,10,17,etc
124 The current "n_to_xy()" code extends to the left by an extra 0.5 for
126 fractional N, so for example N=9.5 is at X=-0.5,Y=3. With this the
127 starting N for each gnomon d is
128 StartNfrac(d) = d^2 + 0.5
130 Inverting gives the gnomon d number for an N,
132 d = floor(sqrt(N - 0.5))
134 Subtracting the gnomon start gives an offset into that gnomon
136 OffStart = N - StartNfrac(d)
138 The corner point 1,3,7,13,etc where the gnomon turns down is at d+0.5
140 into that remainder, and it's convenient to subtract that so negative
141 for the horizontal and positive for the vertical,
142 Off = OffStart - (d+0.5)
144 = N - (d*(d+1) + 1)
145 Then the X,Y coordinates are
147 if (Off < 0) then X=d+Off, Y=d
149 if (Off >= 0) then X=d, Y=d-Off
150 X,Y to N
152 For a given X,Y the bigger of X or Y determines the d gnomon.
153 If Y>=X then X,Y is on the horizontal part. At X=0 have N=StartN(d)
155 per the Start(N) formula above, and any further X is an offset from
156 there.
157 if Y >= X then
159 d=Y
160 N = StartN(d) + X
161 = Y^2 + 1 + X
162 Otherwise if Y<X then X,Y is on the vertical part. At Y=0 N is the
164 last point on the gnomon, and one back from the start of the following
165 gnomon,
166 if Y <= X then
168 d=X
169 LastN(d) = StartN(d+1) - 1
170 = (d+1)^2
171 N = LastN(d) - Y
172 = (X+1)^2 - Y
173 Rectangle N Range
175 For "rect_to_n_range()", in each row increasing X is increasing N so
176 the smallest N is in the leftmost column and the biggest N in the
177 rightmost column.
178 |
180 | ------> N increasing
181 |
182 -----------------------
183 Going up a column, N values are increasing away from the X=Y diagonal
185 up or down, and all N values above X=Y are bigger than the ones below.
186 | ^ N increasing up from X=Y diagonal
188 | |
189 | |/
190 | /
191 | /|
192 | / | N increasing down from X=Y diagonal
193 | / v
194 |/
195 -----------------------
196 This means the biggest N is the top right corner if that corner is
198 Y>=X, otherwise the bottom right corner.
199 max N at top right
201 | / | --+ if corner Y>=X
202 | / --+ | | /
203 | / | | |/
204 | / | | |
205 | / ----v | /|
206 | / max N at bottom right | --+
207 |/ if corner Y<=X |/
208 ---------- -------
209 For the smallest N, if the bottom left corner has Y>X then it's in the
211 "increasing" part and that bottom left corner is the smallest N.
212 Otherwise Y<=X means some of the "decreasing" part is covered and the
213 smallest N is at Y=min(X,Ymax), ie. either the Y=X diagonal if it's in
214 the rectangle or the top right corner otherwise.
215 | /
217 | | /
218 | | / min N at bottom left
219 | +---- if corner Y>X
220 | /
221 | /
222 |/
223 ----------
224 | / | /
226 | | / | /
227 | |/ min N at X=Y | /
228 | * if diagonal crossed | / +-- min N at top left
229 | /| | / | if corner Y<X
230 | / +----- | / |
231 |/ |/
232 ---------- ----------
233 min N at Xmin,Ymin if Ymin >= Xmin
235 Xmin,min(Xmin,Ymax) if Ymin <= Xmin
236
238 This path is in Sloane's Online Encyclopedia of Integer Sequences as,
239 <http://oeis.org/A196199> (etc)
241 wider=0, n_start=1 (the defaults)
243 A213088 X+Y sum
244 A196199 X-Y diff, being runs -n to +n
245 A053615 abs(X-Y), runs n to 0 to n, distance to next pronic
246 A000290 N on X axis, perfect squares starting from 1
248 A002522 N on Y axis, Y^2+1
249 A002061 N on X=Y diagonal, extra initial 1
250 A004201 N on and below X=Y diagonal, so X>=Y
251 A020703 permutation N at transpose Y,X
253 A060734 permutation N by diagonals up from X axis
254 A064790 inverse
255 A060736 permutation N by diagonals down from Y axis
256 A064788 inverse
257 A027709 boundary length of N unit squares
259 A078633 grid sticks of N points
260 n_start=0
262 A000196 max(X,Y), being floor(sqrt(N))
263 A005563 N on X axis, n*(n+2)
265 A000290 N on Y axis, perfect squares
266 A002378 N on X=Y diagonal, pronic numbers
267 n_start=2
269 A059100 N on Y axis, Y^2+2
270 A014206 N on X=Y diagonal, pronic+2
271 wider=1
273 A053188 abs(X-Y), dist to nearest square, extra initial 0
274 wider=1, n_start=0
275 A002378 N on Y axis, pronic numbers
276 A005563 N on X=Y diagonal, n*(n+2)
277 wider=1, n_start=2
278 A014206 N on Y axis, pronic+2
279 wider=2, n_start=0
281 A005563 N on Y axis, (Y+1)^2-1
282 A028552 N on X=Y diagonal, k*(k+3)
283 wider=3, n_start=0
285 A028552 N on Y axis, k*(k+3)
286
288 Math::PlanePath, Math::PlanePath::PyramidSides,
289 Math::PlanePath::PyramidRows, Math::PlanePath::SacksSpiral,
290 Math::PlanePath::Diagonals
291
293 <http://user42.tuxfamily.org/math-planepath/index.html>
294
296 Copyright 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Kevin
297 Ryde
298 This file is part of Math-PlanePath.
300 Math-PlanePath is free software; you can redistribute it and/or modify
302 it under the terms of the GNU General Public License as published by
303 the Free Software Foundation; either version 3, or (at your option) any
304 later version.
305 Math-PlanePath is distributed in the hope that it will be useful, but
307 WITHOUT ANY WARRANTY; without even the implied warranty of
308 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
309 General Public License for more details.
310 You should have received a copy of the GNU General Public License along
312 with Math-PlanePath. If not, see <http://www.gnu.org/licenses/>.
313perl v5.30.0 2019-08-17 Math::PlanePath::Corner(3)