1COROSYNC-CFGTOOL(8)                                        COROSYNC-CFGTOOL(8)
2
3
4

NAME

6       corosync-cfgtool - An administrative tool for corosync.
7

SYNOPSIS

9       corosync-cfgtool  [[-i  IP_address]  [-b] -s] [-R] [-L] [-k nodeid] [-a
10       nodeid] [-h] [-H]
11

DESCRIPTION

13       corosync-cfgtool A tool for displaying and configuring  active  parame‐
14       ters within corosync.
15

OPTIONS

17       -i     Finds  only information about the specified interface IP address
18              or link id with -s.
19
20       -s     Displays the status of  the  current  links  on  this  node  for
21              UDP/UDPU,  with  extended status for KNET.  After each link, the
22              nodes on that link are displayed in order with their status, for
23              example there are 3 nodes with KNET transportation: LINK ID 0:
24                  id     = 192.168.100.80
25                  status:
26                      node 0: link enabled: 1     link connected: 1
27                      node 1: link enabled: 1     link connected: 1
28                      node 2: link enabled: 1     link connected: 1
29
30       -b     Displays  the  brief  status  of  the current links on this node
31              (KNET only) when used with "-s". If any interfaces are faulty, 1
32              is  returned  by  the  binary. If all interfaces are active 0 is
33              returned to the shell.  After each link, the nodes on that  link
34              are  displayed  in order with their status encoded into a single
35              digit. 1=link enabled, 2=link connected, So a 3 in a node  posi‐
36              tion indicates that the link is both enabled and connected.  The
37              local link (which will only ever be enabled on link 0) shows  as
38              enabled but not connected for internal reasons.  The output will
39              be: LINK ID 0:
40                  id     = 192.168.100.80
41                  status = 333
42
43       -R     Tell all  instances  of  corosync  in  this  cluster  to  reload
44              corosync.conf.
45
46       -L     Tell  corosync to reopen all logging files. In contrast to other
47              subcommands, nothing is displayed on terminal if  call  is  suc‐
48              cessful.
49
50       -k     Kill a node identified by node id.
51
52       -a     Display the IP address(es) of a node.
53
54       -h     Print basic usage.
55
56       -H     Shutdown corosync cleanly on this node.
57

SEE ALSO

59       corosync_overview(7),
60

AUTHOR

62       Angus Salkeld
63
64                                  2019-07-04               COROSYNC-CFGTOOL(8)