1OBI2NCID(1) User Contributed Perl Documentation OBI2NCID(1)
2
6 obi2ncid - Obihai device to NCID gateway
7
9 obi2ncid [--configfile | -C <filename>]
10 [--debug | -D]
11 [--delay | -d <seconds>]
12 [--help | -h]
13 [--hostname-flag | -H <0|1>]
14 [--linefx | -f <string>]
15 [--logfile-append | -l <filename>]
16 [--logfile-overwrite | -L <filename>]
17 [--man | -m]
18 [--ncidhost | -n <[host][:port]>]
19 [--no-filter | -N]
20 [--obiport | -o <port>]
21 [--pidfile | -p <filename>]
22 [--rawfile-append | -r <filename>]
23 [--rawfile-overwrite | -R <filename>]
24 [--test | -t]
25 [--verbose | -v <1-9>]
26 [--version | -V]
27
29 The obi2ncid gateway obtains Caller ID from an Obihai VOiP telephone
30 adapter and sends it to the NCID server. The server then sends the CID
31 information to the NCID clients.
32 The gateway was developed using Obi100, OBi110 and OBi200 devices that
34 were available.
35 The obi2ncid gateway uses either GTALK, the Voice Service AuthUserName,
37 or the configurable default name for a line identifier.
38 The line identifier(s) can be aliased by the NCID server so you can
40 give each Voice Service a meaningful identification.
41 The obi2ncid configuration file is /etc/ncid/obi2ncid.conf. See the
43 obi2ncid.conf man page for more details.
44 The obi2ncid gateway can run on any computer, but normally it is run on
46 the same box as the NCID server. If it is not run on the same box as
47 the NCID server, you must configure the server IP address in the
48 configuration file.
49 LINEID
51 The obi2ncid gateway attempts to assign the lineid based on the
52 following table. "SP" is an abbreviation for "Service Provider" and
53 "PSTN" is an abbreviation for "Public Switched Telephone Network."
54 Call type Lineid assigned
56 ========= ===============
57 Google Voice in or out "GTALK"
58 VoIP in or out on default line <AuthUserName>
59 Incoming PSTN "FXO"
60 Outgoing PSTN using ##<number> "FXS"
61 Outgoing VoIP using **1<number> "SP1"
62 Outgoing VoIP using **2<number> "SP2"
63 Outgoing VoIP using **3<number> "SP3"
64 Outgoing VoIP using **4<number> "SP4"
65 Device setup using **5<number> "SP5"
66 Outgoing VoIP using **9<number> "OBITALK" (a.k.a. Obi-to-Obi)
67 NOTES: If line selected is the GTALK line, then GTALK replaces SP?.
69 If line selected is **9, then OBITALK replaces SP9.
70 PSTN requires an OBiLINE device connected to an Obi200.
71 For incoming/outgoing PSTN calls, see the description for --linefx.
73 If **[0-9] is dialed on the keypad to select a line, the lineid becomes
75 SP[0-9].
76 The number of SP lines are 1 to 4 plus 5 and 9, depending on the
78 device. The default lineid for SP1 to SP4 can be changed only in the
79 obi2ncid.conf configuration file. Google Talk is special in that
80 "GTALK" can be detected on which SP line is used for it. The other
81 voice providers must have their linesp[0-4] variable set to their
82 lineid.
83 SP9 has the reserved lineid of "OBITALK" and can not be changed.
85 In cases where the lineid cannot otherwise be determined, the default
87 lineid becomes OBIHAI.
88 IMPORTANT
90 This gateway does not work properly with a OBILINE add-on accessory
91 that connects to a phone line.
92
94 Obihai VoIP Telephone Adapter: Obi100, Obi110, Obi200, Obi202?
95 http://www.obihai.com/
96 Google Voice or a SIP voice provider
98 (voip.ms, callcentric, others untested)
99 The NCID server
101 http://ncid.sourceforge.net/ncid/ncid.html
102 perl 5.6 or higher, perl(Config::Simple)
104
106 --configfile <filename>, -C <filename>
107 Specifies the configuration file to use. The program will still run
108 if a configuration file is not found.
109 Default: /etc/ncid/obi2ncid.conf
111 --debug, -D
113 Debug mode, displays all messages that go into the log file. Use
114 this option to run interactively.
115 --delay <seconds>, -d <seconds>
117 If the connection to the NCID server is lost, try every <delay>
118 seconds to reconnect.
119 Default: 15
121 --help, -h
123 Displays the help message and exits.
124 --hostname-flag <0|1>, -H <0|1>
126 When the hostname flag is set to 1, the IDENT string sent to a server
127 will include the hostname with the program name.
128 Default: 0
130 --linefx <string>, -f <string>
132 This option requires the OBiLINE FXO-to-USB Phone Line Adapter for
133 the Obi2xx series. The Obi110 has it built in.
134 Normally "FXO" and "FXS" refer to line (telco) and phone (handset)
136 respectively. OBiLINE changes the meaning of these to be "FXO" for
137 incoming calls and "FXS" for outgoing calls, so by default "FXO" and
138 "FXS" are used as the lineid and can not be changed.
139 However, if --linefx is given a value, it replaces both "FXO" and
141 "FXS" with that value.
142 For example:
144 --linefx POTS will cause the lineid for incoming and outgoing
145 calls to be POTS.
146 Default: no default
148 --logfile-append <filename>, -l <filename>
150 --logfile-overwrite <filename>, -L <filename>
151 Specifies the logfile name to write. The program will still run if
152 it does not have permission to write to it.
153 If both options are present, --logfile-append takes precedence.
155 Default: Append to /var/log/obi2ncid.log
157 --man, -m
159 Displays the manual page and exits.
160 --ncidhost <[host][:port]>, -n <[host][:port]>
162 Specifies the NCID server. Port may be specified by suffixing the
163 hostname with :<port>.
164 Input must be <host> or <host:port>, or <:port>.
166 Default: localhost:3333
168 --no-filter, -N
170 Useful for development and troubleshooting purposes.
171 A list of zero or more filter lines is stored in obi2ncid.conf.
173 An Obihai device periodically sends out packets when it is doing its
175 own internal "housekeeping." Such packets do not have anything to do
176 with call activity, but they can clutter and confuse verbose output
177 because of their sheer volume and frequency.
178 However, in unusual circumstances it may be necessary to use the
180 --no-filter option to include all housekeeping packets.
181 Default: filtering is ON
183 --obiport <port>, -o <port>
185 Specifies the UDP port to listen on for Caller ID from an OBi device.
186 Default: 4335
188 --pcap-read <filename>
190 Read packets from a libpcap capture file instead of the network. This
191 also sets the test option and verbose to level 3. Mostly only useful
192 for development and debug purposes.
193 --pidfile <filename>, -p <filename>
195 Specifies the pidfile name to write. The program will still run if it
196 does not have permission to write a pidfile. The pid filename that
197 should be used is /var/run/obi2ncid.pid.
198 Default: no pidfile
200 --rawfile-append <filename>, -r <filename>
202 --rawfile-overwrite <filename>, -R <filename>
203 Useful for development and troubleshooting purposes.
204 Writes packets to a file exactly as received from the gateway device.
206 A filename extension of .data is suggested. The rawfile can be
207 "played back" using test-obi-gw.
208 Raw packets from Obihai devices do not have a date/time stamp. When
210 played back, the obi2ncid gateway script will treat the packets as
211 arriving using the current date/time.
212 If both options are present, --rawfile-append takes precedence.
214 Default: no raw file
216 --test, -t
218 Test mode is a connection to the gateway device without a connection
219 to the NCID server. It sets debug mode and verbose = 3. The verbose
220 level can be changed on the command line.
221 Default: no test mode
223 --verbose <1-9>, -v <1-9>
225 Output information, used for the logfile and the debug option. Set
226 the level to a higher number for more information. Levels range from
227 1 to 9, but not all levels are used.
228 Default: verbose = 1
230 --version, -V
232 Displays the version and exits.
233
235 Start obi2ncid in test mode at verbose level 3
236 obi2ncid --test
237 Start obi2ncid in test mode at verbose level 5 and keep a test log
239 obi2ncid -t -v5 -L test.log
240 Start obi2ncid in test mode and keep a file of the input data
242 obi2ncid -t -R test.data
243 Start obi2ncid in debug mode at verbose level 1
245 obi2ncid -D
246
248 /etc/ncid/obi2ncid.conf
249
251 obi2ncid.conf.5, ncidd.8, ncidd.conf.5, ncid_gateways.7
252perl v5.30.1 2020-02-03 OBI2NCID(1)