1TIMEDATECTL(1) timedatectl TIMEDATECTL(1)
2
6 timedatectl - Control the system time and date
7
9 timedatectl [OPTIONS...] {COMMAND}
10
12 timedatectl may be used to query and change the system clock and its
13 settings, and enable or disable time synchronization services.
14 Use systemd-firstboot(1) to initialize the system time zone for mounted
16 (but not booted) system images.
17 timedatectl may be used to show the current status of time
19 synchronization services, for example systemd-timesyncd.service(8).
20
22 The following commands are understood:
23 status
25 Show current settings of the system clock and RTC, including
26 whether network time synchronization is active. If no command is
27 specified, this is the implied default.
28 show
30 Show the same information as status, but in machine readable form.
31 This command is intended to be used whenever computer-parsable
32 output is required. Use status if you are looking for formatted
33 human-readable output.
34 By default, empty properties are suppressed. Use --all to show
36 those too. To select specific properties to show, use --property=.
37 set-time [TIME]
39 Set the system clock to the specified time. This will also update
40 the RTC time accordingly. The time may be specified in the format
41 "2012-10-30 18:17:16".
42 set-timezone [TIMEZONE]
44 Set the system time zone to the specified value. Available
45 timezones can be listed with list-timezones. If the RTC is
46 configured to be in the local time, this will also update the RTC
47 time. This call will alter the /etc/localtime symlink. See
48 localtime(5) for more information.
49 list-timezones
51 List available time zones, one per line. Entries from the list can
52 be set as the system timezone with set-timezone.
53 set-local-rtc [BOOL]
55 Takes a boolean argument. If "0", the system is configured to
56 maintain the RTC in universal time. If "1", it will maintain the
57 RTC in local time instead. Note that maintaining the RTC in the
58 local timezone is not fully supported and will create various
59 problems with time zone changes and daylight saving adjustments. If
60 at all possible, keep the RTC in UTC mode. Note that invoking this
61 will also synchronize the RTC from the system clock, unless
62 --adjust-system-clock is passed (see above). This command will
63 change the 3rd line of /etc/adjtime, as documented in hwclock(8).
64 set-ntp [BOOL]
66 Takes a boolean argument. Controls whether network time
67 synchronization is active and enabled (if available). If the
68 argument is true, this enables and starts the first existing
69 network synchronization service. If the argument is false, then
70 this disables and stops the known network synchronization services.
71 The way that the list of services is built is described below.
72 systemd-timesyncd Commands
74 The following commands are specific to systemd-timesyncd.service(8).
75 timesync-status
77 Show current status of systemd-timesyncd.service(8). If --monitor
78 is specified, then this will monitor the status updates.
79 show-timesync
81 Show the same information as timesync-status, but in machine
82 readable form. This command is intended to be used whenever
83 computer-parsable output is required. Use timesync-status if you
84 are looking for formatted human-readable output.
85 By default, empty properties are suppressed. Use --all to show
87 those too. To select specific properties to show, use --property=.
88 ntp-servers INTERFACE SERVER...
90 Set the interface specific NTP servers. This command can be used
91 only when the interface is managed by systemd-networkd.
92 revert INTERFACE
94 Revert the interface specific NTP servers. This command can be used
95 only when the interface is managed by systemd-networkd.
96
98 The following options are understood:
99 --no-ask-password
101 Do not query the user for authentication for privileged operations.
102 --adjust-system-clock
104 If set-local-rtc is invoked and this option is passed, the system
105 clock is synchronized from the RTC again, taking the new setting
106 into account. Otherwise, the RTC is synchronized from the system
107 clock.
108 --monitor
110 If timesync-status is invoked and this option is passed, then
111 timedatectl monitors the status of systemd-timesyncd.service(8) and
112 updates the outputs. Use Ctrl+C to terminate the monitoring.
113 -a, --all
115 When showing properties of systemd-timesyncd.service(8), show all
116 properties regardless of whether they are set or not.
117 -p, --property=
119 When showing properties of systemd-timesyncd.service(8), limit
120 display to certain properties as specified as argument. If not
121 specified, all set properties are shown. The argument should be a
122 property name, such as "ServerName". If specified more than once,
123 all properties with the specified names are shown.
124 --value
126 When printing properties with show-timesync, only print the value,
127 and skip the property name and "=".
128 -H, --host=
130 Execute the operation remotely. Specify a hostname, or a username
131 and hostname separated by "@", to connect to. The hostname may
132 optionally be suffixed by a port ssh is listening on, separated by
133 ":", and then a container name, separated by "/", which connects
134 directly to a specific container on the specified host. This will
135 use SSH to talk to the remote machine manager instance. Container
136 names may be enumerated with machinectl -H HOST. Put IPv6 addresses
137 in brackets.
138 -M, --machine=
140 Execute operation on a local container. Specify a container name to
141 connect to.
142 -h, --help
144 Print a short help text and exit.
145 --version
147 Print a short version string and exit.
148 --no-pager
150 Do not pipe output into a pager.
151
153 On success, 0 is returned, a non-zero failure code otherwise.
154
156 $SYSTEMD_PAGER
157 Pager to use when --no-pager is not given; overrides $PAGER. If
158 neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known
159 pager implementations are tried in turn, including less(1) and
160 more(1), until one is found. If no pager implementation is
161 discovered no pager is invoked. Setting this environment variable
162 to an empty string or the value "cat" is equivalent to passing
163 --no-pager.
164 $SYSTEMD_LESS
166 Override the options passed to less (by default "FRSXMK").
167 Users might want to change two options in particular:
169 K
171 This option instructs the pager to exit immediately when Ctrl+C
172 is pressed. To allow less to handle Ctrl+C itself to switch
173 back to the pager command prompt, unset this option.
174 If the value of $SYSTEMD_LESS does not include "K", and the
176 pager that is invoked is less, Ctrl+C will be ignored by the
177 executable, and needs to be handled by the pager.
178 X
180 This option instructs the pager to not send termcap
181 initialization and deinitialization strings to the terminal. It
182 is set by default to allow command output to remain visible in
183 the terminal even after the pager exits. Nevertheless, this
184 prevents some pager functionality from working, in particular
185 paged output cannot be scrolled with the mouse.
186 See less(1) for more discussion.
188 $SYSTEMD_LESSCHARSET
190 Override the charset passed to less (by default "utf-8", if the
191 invoking terminal is determined to be UTF-8 compatible).
192 $SYSTEMD_COLORS
194 The value must be a boolean. Controls whether colorized output
195 should be generated. This can be specified to override the decision
196 that systemd makes based on $TERM and what the console is connected
197 to.
198 $SYSTEMD_URLIFY
200 The value must be a boolean. Controls whether clickable links
201 should be generated in the output for terminal emulators supporting
202 this. This can be specified to override the decision that systemd
203 makes based on $TERM and other conditions.
204
206 Show current settings:
207 $ timedatectl
209 Local time: Thu 2017-09-21 16:08:56 CEST
210 Universal time: Thu 2017-09-21 14:08:56 UTC
211 RTC time: Thu 2017-09-21 14:08:56
212 Time zone: Europe/Warsaw (CEST, +0200)
213 System clock synchronized: yes
214 NTP service: active
215 RTC in local TZ: no
216 Enable network time synchronization:
218 $ timedatectl set-ntp true
220 ==== AUTHENTICATING FOR org.freedesktop.timedate1.set-ntp ===
221 Authentication is required to control whether network time synchronization shall be enabled.
222 Authenticating as: user
223 Password: ********
224 ==== AUTHENTICATION COMPLETE ===
225 $ systemctl status systemd-timesyncd.service
229 ● systemd-timesyncd.service - Network Time Synchronization
230 Loaded: loaded (/usr/lib/systemd/system/systemd-timesyncd.service; enabled)
231 Active: active (running) since Mo 2015-03-30 14:20:38 CEST; 5s ago
232 Docs: man:systemd-timesyncd.service(8)
233 Main PID: 595 (systemd-timesyn)
234 Status: "Using Time Server 216.239.38.15:123 (time4.google.com)."
235 CGroup: /system.slice/systemd-timesyncd.service
236 └─595 /usr/lib/systemd/systemd-timesyncd
237 ...
238 Show current status of systemd-timesyncd.service(8):
240 $ timedatectl timesync-status
242 Server: 216.239.38.15 (time4.google.com)
243 Poll interval: 1min 4s (min: 32s; max 34min 8s)
244 Leap: normal
245 Version: 4
246 Stratum: 1
247 Reference: GPS
248 Precision: 1us (-20)
249 Root distance: 335us (max: 5s)
250 Offset: +316us
251 Delay: 349us
252 Jitter: 0
253 Packet count: 1
254 Frequency: -8.802ppm
255
258 systemd(1), hwclock(8), date(1), localtime(5), systemctl(1), systemd-
259 timedated.service(8), systemd-timesyncd.service(8), systemd-
260 firstboot(1)
261systemd 245 TIMEDATECTL(1)