1Mail::Sender(3) User Contributed Perl Documentation Mail::Sender(3)
2
6 Mail::Sender - (DEPRECATED) module for sending mails with attachments
7 through an SMTP server
8
10 Mail::Sender is deprecated. Email::Sender is the go-to choice when you
11 need to send Email from Perl. Go there, be happy!
12
14 use Mail::Sender;
15 my $sender = Mail::Sender->new({
17 smtp => 'mail.yourdomain.com',
18 from => 'your@address.com'
19 });
20 $sender->MailFile({
21 to => 'some@address.com',
22 subject => 'Here is the file',
23 msg => "I'm sending you the list you wanted.",
24 file => 'filename.txt'
25 });
26
28 Mail::Sender is deprecated. Email::Sender is the go-to choice when you
29 need to send Email from Perl. Go there, be happy!
30 Mail::Sender provides an object-oriented interface to sending mails. It
32 directly connects to the mail server using IO::Socket.
33
35 Mail::Sender implements the following attributes.
36 * Please note that altering an attribute after object creation is best
38 handled with creating a copy using "$sender = $sender->new({attribute
39 => 'value'})". To obtain the current value of an attribute, break all
40 the rules and reach in there! "my $val = $sender->{attribute};"
41 auth
43 # mutating single attributes could get costly!
44 $sender = $sender->new({auth => 'PLAIN'});
45 my $auth = $sender->{auth}; # reach in to grab
46 The SMTP authentication protocol to use to login to the server
48 currently the only ones supported are "LOGIN", "PLAIN", "CRAM-MD5" and
49 "NTLM". Some protocols have module dependencies. "CRAM-MD5" depends on
50 Digest::HMAC_MD5 and "NTLM" on Authen::NTLM.
51 You may add support for other authentication protocols yourself.
53 auth_encoded
55 # mutating single attributes could get costly!
56 $sender = $sender->new({auth_encoded => 1});
57 my $auth_enc = $sender->{auth_encoded}; # reach in to grab
58 If set to a true value, Mail::Sender attempts to use TLS (encrypted
60 connection) whenever the server supports it and you have
61 IO::Socket::SSL and Net::SSLeay.
62 The default value of this option is true! This means that if
64 Mail::Sender can send the data encrypted, it will.
65 authdomain
67 # mutating single attributes could get costly!
68 $sender = $sender->new({authdomain => 'bar.com'});
69 my $domain = $sender->{authdomain}; # reach in to grab
70 The domain name; used optionally by the "NTLM" authentication. Other
72 authentication protocols may use other options as well. They should all
73 start with "auth" though.
74 authid
76 # mutating single attributes could get costly!
77 $sender = $sender->new({authid => 'username'});
78 my $username = $sender->{authid}; # reach in to grab
79 The username used to login to the server.
81 authpwd
83 # mutating single attributes could get costly!
84 $sender = $sender->new({authpwd => 'password'});
85 my $password = $sender->{authpwd}; # reach in to grab
86 The password used to login to the server.
88 bcc
90 # mutating single attributes could get costly!
91 $sender = $sender->new({bcc => 'foo@bar.com'});
92 $sender = $sender->new({bcc => 'foo@bar.com, bar@baz.com'});
93 $sender = $sender->new({bcc => ['foo@bar.com', 'bar@baz.com']});
94 my $bcc = $sender->{bcc}; # reach in to grab
95 Send a blind carbon copy to these addresses.
97 boundary
99 # mutating single attributes could get costly!
100 $sender = $sender->new({boundary => '--'});
101 my $boundary = $sender->{boundary}; # reach in to grab
102 The message boundary. You usually do not have to change this, it might
104 only come in handy if you need to attach a multi-part mail created by
105 Mail::Sender to your message as a single part. Even in that case any
106 problems are unlikely.
107 cc
109 # mutating single attributes could get costly!
110 $sender = $sender->new({cc => 'foo@bar.com'});
111 $sender = $sender->new({cc => 'foo@bar.com, bar@baz.com'});
112 $sender = $sender->new({cc => ['foo@bar.com', 'bar@baz.com']});
113 my $cc = $sender->{cc}; # reach in to grab
114 Send a carbon copy to these addresses.
116 charset
118 # mutating single attributes could get costly!
119 $sender = $sender->new({charset => 'UTF-8'});
120 my $charset = $sender->{charset}; # reach in to grab
121 The charset of the single part message or the body of the multi-part
123 one.
124 client
126 # mutating single attributes could get costly!
127 $sender = $sender->new({client => 'localhost.localdomain'});
128 my $client = $sender->{client}; # reach in to grab
129 The name of the client computer.
131 During the connection you send the mail server your computer's name. By
133 default Mail::Sender sends "(gethostbyname 'localhost')[0]". If that is
134 not the address your needs, you can specify a different one.
135 confirm
137 # only delivery, to the 'from' address
138 $sender = $sender->new({confirm => 'delivery'});
139 # only reading, to the 'from' address
140 $sender = $sender->new({confirm => 'reading'});
141 # both: to the 'from' address
142 $sender = $sender->new({confirm => 'delivery, reading'});
143 # delivery: to specified address
144 $sender = $sender->new({confirm => 'delivery: my.other@address.com'});
145 my $confirm = $sender->{confirm}; # reach in to grab
146 Whether you want to request reading or delivery confirmations and to
148 what addresses.
149 Keep in mind that confirmations are not guaranteed to work. Some
151 servers/mail clients do not support this feature and some users/admins
152 may have disabled it. So it's possible that your mail was delivered
153 and read, but you won't get any confirmation!
154 createmessageid
156 # mutating single attributes could get costly!
157 $sender = $sender->new({createmessageid => sub {
158 my $from = shift;
159 my ($sec, $min, $hour, $mday, $mon, $year) = gmtime(time);
160 $mon++;
161 $year += 1900;
162 return sprintf "<%04d%02d%02d_%02d%02d%02d_%06d.%s>", $year, $mon, $mday,
164 $hour, $min, $sec, rand(100000), $from;
165 }});
166 my $cm_id = $sender->{createmessageid}; # reach in to grab
167 This option allows you to overwrite the function that generates the
169 message IDs for the emails. The option gets the "pure" sender's address
170 as it's only parameter and is supposed to return a string. See the
171 "MessageID" in Mail::Sender method.
172 If you want to specify a message id you can also use the "messageid"
174 parameter for the "Open" in Mail::Sender, "OpenMultipart" in
175 Mail::Sender, "MailMsg" in Mail::Sender or "MailFile" in Mail::Sender
176 methods.
177 ctype
179 # mutating single attributes could get costly!
180 $sender = $sender->new({ctype => 'text/plain'});
181 my $type = $sender->{ctype}; # reach in to grab
182 The content type of a single part message or the body of the multi-part
184 one.
185 Please do not confuse these two. The "multipart" in Mail::Sender
187 parameter is used to specify the overall content type of a multi-part
188 message (for example any HTML document with inlined images) while
189 "ctype" is an ordinary content type for a single part message or the
190 body of a multi-part message.
191 debug
193 # mutating single attributes could get costly!
194 $sender = $sender->new({debug => '/path/to/debug/file.txt'});
195 $sender = $sender->new({debug => $file_handle});
196 my $debug = $sender->{debug}; # reach in to grab
197 All the conversation with the server will be logged to that file or
199 handle. All lines in the file should end with "CRLF" (the Windows and
200 Internet format).
201 If you pass the path to the log file, Mail::Sender will overwrite it.
203 If you want to append to the file, you have to open it yourself and
204 pass the filehandle:
205 open my $fh, '>>', '/path/to/file.txt' or die "Can't open: $!";
207 my $sender = Mail::Sender->new({
208 debug => $fh,
209 });
210 debug_level
212 # mutating single attributes could get costly!
213 $sender = $sender->new({debug_level => 1});
214 # 1: only log server communication, skip all msg data
215 # 2: log server comm. and message headers
216 # 3: log server comm., message and part headers
217 # 4: log everything (default behavior)
218 my $level = $sender->{debug_level}; # reach in to grab
219 Only taken into account if the "debug" attribute is specified.
221 encoding
223 # mutating single attributes could get costly!
224 $sender = $sender->new({encoding => 'Quoted-printable'});
225 my $encoding = $sender->{encoding}; # reach in to grab
226 Encoding of a single part message or the body of a multi-part message.
228 If the text of the message contains some extended characters or very
230 long lines, you should use "encoding => 'Quoted-printable'" in the call
231 to "Open" in Mail::Sender, "OpenMultipart" in Mail::Sender, "MailMsg"
232 in Mail::Sender or "MailFile" in Mail::Sender.
233 If you use some encoding you should either use "SendEnc" in
235 Mail::Sender or encode the data yourself!
236 ESMPT
238 # mutating single attributes could get costly!
239 $sender = $sender->new({
240 ESMTP => {
241 NOTIFY => 'SUCCESS,FAILURE,DELAY',
242 RET => 'HDRS',
243 ORCPT => 'rfc822;my.other@address.com',
244 ENVID => 'iuhsdfobwoe8t237',
245 },
246 });
247 my $esmtp = $sender->{ESMTP}; # reach in to grab
248 This option contains data for SMTP extensions. For example, it allows
250 you to request delivery status notifications according to RFC1891
251 <https://tools.ietf.org/html/rfc1891>. If the SMTP server you connect
252 to doesn't support this extension, the options will be ignored. You do
253 not need to worry about encoding the "ORCPT" or "ENVID" parameters.
254 · "ENVID" - Used to propagate an identifier for this message
256 transmission envelope, which is also known to the sender and will,
257 if present, be returned in any Delivery Status Notifications issued
258 for this transmission.
259 · "NOTIFY" - To specify the conditions under which a delivery status
261 notification should be generated. Should be either "NEVER" or a
262 comma-separated list of "SUCCESS", "FAILURE" and "DELAY".
263 · "ORCPT" - Used to convey the original (sender-specified) recipient
265 address.
266 · "RET" - To request that Delivery Status Notifications containing an
268 indication of delivery failure either return the entire contents of
269 a message or only the message headers. Must be either "FULL" or
270 "HDRS".
271 fake_cc
273 # mutating single attributes could get costly!
274 $sender = $sender->new({fake_cc => 'foo@bar.com'});
275 my $fake_cc = $sender->{fake_cc}; # reach in to grab
276 The address that will be shown in headers. If not specified, the "cc"
278 in Mail::Sender attribute will be used.
279 fake_from
281 # mutating single attributes could get costly!
282 $sender = $sender->new({fake_from => 'foo@bar.com'});
283 my $fake_from = $sender->{fake_from}; # reach in to grab
284 The address that will be shown in headers. If not specified, the "from"
286 in Mail::Sender attribute will be used.
287 fake_to
289 # mutating single attributes could get costly!
290 $sender = $sender->new({fake_to => 'foo@bar.com'});
291 my $fake_to = $sender->{fake_to}; # reach in to grab
292 The recipient's address that will be shown in headers. If not
294 specified, the "to" in Mail::Sender attribute will be used.
295 If the list of addresses you want to send your message to is long or if
297 you do not want the recipients to see each other's address set the
298 "fake_to" in Mail::Sender parameter to some informative, yet bogus,
299 address or to the address of your mailing/distribution list.
300 from
302 # mutating single attributes could get costly!
303 $sender = $sender->new({from => 'foo@bar.com'});
304 my $from = $sender->{from}; # reach in to grab
305 The sender's email address.
307 headers
309 # mutating single attributes could get costly!
310 $sender = $sender->new({headers => 'Content-Type: text/plain'});
311 $sender = $sender->new({headers => {'Content-Type' => 'text/plain'}});
312 my $headers = $sender->{headers}; # reach in to grab
313 You may use this parameter to add custom headers into the message. The
315 parameter may be either a string containing the headers in the right
316 format or a hash containing the headers and their values.
317 keepconnection
319 # mutating single attributes could get costly!
320 $sender = $sender->new({keepconnection => 1);
321 $sender = $sender->new({keepconnection => 0});
322 my $keepcon = $sender->{keepconnection}; # reach in to grab
323 If set to a true value, it causes the Mail::Sender to keep the
325 connection open for several messages. The connection will be closed if
326 you call the "Close" in Mail::Sender method with a true value or if you
327 call "Open" in Mail::Sender, "OpenMultipart" in Mail::Sender, "MailMsg"
328 in Mail::Sender or "MailFile" in Mail::Sender with the "smtp"
329 attribute. This means that if you want the object to keep the
330 connection, you should pass the "smtp" either to "new" in Mail::Sender
331 or only to the first "Open" in Mail::Sender, "OpenMultipart" in
332 Mail::Sender, "MailMsg" in Mail::Sender or "MailFile" in Mail::Sender!
333 multipart
335 # mutating single attributes could get costly!
336 $sender = $sender->new({multipart => 'Mixed'});
337 my $multi = $sender->{multipart}; # reach in to grab
338 The "MIME" subtype for the whole message ("Mixed/Related/Alternative").
340 You may need to change this setting if you want to send an HTML body
341 with some inline images, or if you want to post the message in plain
342 text as well as HTML (alternative).
343 on_errors
345 # mutating single attributes could get costly!
346 $sender = $sender->new({on_errors => 'undef'}); # return undef on error
347 $sender = $sender->new({on_errors => 'die'}); # raise an exception
348 $sender = $sender->new({on_errors => 'code'}); # return the negative error code (default)
349 # -1 = $smtphost unknown
350 # -2 = socket() failed
351 # -3 = connect() failed
352 # -4 = service not available
353 # -5 = unspecified communication error
354 # -6 = local user $to unknown on host $smtp
355 # -7 = transmission of message failed
356 # -8 = argument $to empty
357 # -9 = no message specified in call to MailMsg or MailFile
358 # -10 = no file name specified in call to SendFile or MailFile
359 # -11 = file not found
360 # -12 = not available in singlepart mode
361 # -13 = site specific error
362 # -14 = connection not established. Did you mean MailFile instead of SendFile?
363 # -15 = no SMTP server specified
364 # -16 = no From: address specified
365 # -17 = authentication protocol not accepted by the server
366 # -18 = login not accepted
367 # -19 = authentication protocol is not implemented
368 # -20 = all recipients were rejected by the server
369 # -21 = file specified as an attachment cannot be read
370 # -22 = failed to open the specified debug file for writing
371 # -23 = STARTTLS failed (for SSL or TLS encrypted connections)
372 # -24 = IO::Socket::SSL->start_SSL failed
373 # -25 = TLS required by the specified options, but the required modules are not available. Need IO::Socket::SSL and Net::SSLeay
374 # -26 = TLS required by the specified options, but the server doesn't support it
375 # -27 = unknown encoding specified for the mail body, part or attachment. Only base64, quoted-printable, 7bit and 8bit supported.
376 my $on_errors = $sender->{on_errors}; # reach in to grab
377 say $Mail::Sender::Error; # contains a textual description of last error.
378 This option allows you to affect the way Mail::Sender reports errors.
380 All methods return the $sender object if they succeed.
381 $Mail::Sender::Error "$sender->{'error'}" and "$sender->{'error_msg'}"
383 are set in all cases.
384 port
386 # mutating single attributes could get costly!
387 $sender = $sender->new({port => 25});
388 my $port = $sender->{port}; # reach in to grab
389 The TCP/IP port used form the connection. By default
391 "getservbyname('smtp', 'tcp')||25". You should only need to use this
392 option if your mail server waits on a nonstandard port.
393 priority
395 # mutating single attributes could get costly!
396 $sender = $sender->new({priority => 1});
397 # 1. highest
398 # 2. high
399 # 3. normal
400 # 4. low
401 # 5. lowest
402 my $priority = $sender->{priority}; # reach in to grab
403 The message priority number.
405 replyto
407 # mutating single attributes could get costly!
408 $sender = $sender->new({replyto => 'foo@bar.com'});
409 my $replyto = $sender->{replyto}; # reach in to grab
410 The reply to address.
412 skip_bad_recipients
414 # mutating single attributes could get costly!
415 $sender = $sender->new({skip_bad_recipients => 1);
416 $sender = $sender->new({skip_bad_recipients => 0});
417 my $skip = $sender->{skip_bad_recipients}; # reach in to grab
418 If this option is set to false, or not specified, then Mail::Sender
420 stops trying to send a message as soon as the first recipient's address
421 fails. If it is set to a true value, Mail::Sender skips the bad
422 addresses and tries to send the message at least to the good ones. If
423 all addresses are rejected by the server, it reports a "All recipients
424 were rejected" message.
425 If any addresses were skipped, the "$sender->{'skipped_recipients'}"
427 will be a reference to a hash containing the failed address and the
428 server's response.
429 smtp
431 # mutating single attributes could get costly!
432 $sender = $sender->new({smtp => 'smtp.bar.com'});
433 my $smtp = $sender->{smtp}; # reach in to grab
434 The IP address or domain of your SMTP server.
436 ssl_...
438 The "ssl_version", "ssl_verify_mode", "ssl_ca_path", "ssl_ca_file",
439 "ssl_verifycb_name", "ssl_verifycn_schema" and "ssl_hostname" options
440 (if specified) are passed to "start_SSL" in IO::Socket::SSL. The
441 default version is "TLSv1" and verify mode is
442 "IO::Socket::SSL::SSL_VERIFY_NONE".
443 If you change the "ssl_verify_mode" to "SSL_VERIFY_PEER", you may need
445 to specify the "ssl_ca_file". If you have Mozilla::CA installed, then
446 setting it to "Mozilla::CA::SSL_ca_file()" may help.
447 subject
449 # mutating single attributes could get costly!
450 $sender = $sender->new({subject => 'An email is coming!'});
451 my $subject = $sender->{subject}; # reach in to grab
452 The subject of the message.
454 tls_allowed
456 # mutating single attributes could get costly!
457 $sender = $sender->new({tls_allowed => 1}); # true, default
458 $sender = $sender->new({tls_allowed => 0}); # false
459 my $tls = $sender->{tls_allowed}; # reach in to grab
460 If set to a true value, Mail::Sender will attempt to use TLS (encrypted
462 connection) whenever the server supports it. This requires that you
463 have IO::Socket::SSL and Net::SSLeay.
464 tls_required
466 # mutating single attributes could get costly!
467 $sender = $sender->new({tls_required => 1}); # true, require TLS encryption
468 $sender = $sender->new({tls_required => 0}); # false, plain. default
469 my $required = $sender->{tls_required};
470 If you set this option to a true value, the module will fail if it's
472 unable to use TLS.
473 to
475 # mutating single attributes could get costly!
476 $sender = $sender->new({to => 'foo@bar.com'});
477 $sender = $sender->new({to => 'foo@bar.com, bar@baz.com'});
478 $sender = $sender->new({to => ['foo@bar.com', 'bar@baz.com']});
479 my $to = $sender->{to}; # reach in to grab
480 The recipient's addresses. This parameter may be either a comma
482 separated list of email addresses or a reference to a list of
483 addresses.
484
486 Mail::Sender implements the following methods.
487 Attach
489 # set parameters in an ordered list
490 # -- description, ctype, encoding, disposition, file(s)
491 $sender = $sender->Attach(
492 'title', 'application/octet-stream', 'Base64', 'attachment; filename=*', '/file.txt'
493 );
494 $sender = $sender->Attach(
495 'title', 'application/octet-stream', 'Base64', 'attachment; filename=*',
496 ['/file.txt', '/file2.txt']
497 );
498 # OR use a hashref
499 $sender = $sender->Attach({
500 description => 'some title',
501 charset => 'US-ASCII', # default
502 encoding => 'Base64', # default
503 ctype => 'application/octet-stream', # default
504 disposition => 'attachment; filename=*', # default
505 file => ['/file1.txt'], # file names
506 content_id => '#', # for auto-increment number, or * for filename
507 });
508 Sends a file as a separate part of the mail message. Only in multi-part
510 mode.
511 Body
513 # set parameters in an ordered list
514 # -- charset, encoding, content-type
515 $sender = $sender->Body('US-ASCII', '7BIT', 'text/plain');
516 # OR use a hashref
517 $sender = $sender->Body({
518 charset => 'US-ASCII', # default
519 encoding => '7BIT', # default
520 ctype => 'text/plain', # default
521 msg => '',
522 });
523 Sends the head of the multi-part message body. You can specify the
525 charset and the encoding.
526 Cancel
528 $sender = $sender->Cancel;
529 Cancel an opened message.
531 "SendFile" in Mail::Sender and other methods may set
533 "$sender->{'error'}". In that case "undef $sender" calls
534 "$sender->Cancel" not "$sender->Close"!!!
535 ClearErrors
537 $sender->ClearErrors();
538 Make the various error variables "undef".
540 Close
542 $sender->Close();
543 $sender->Close(1); # force override keepconnection
544 Close and send the email message. If you pass a true value to the
546 method the connection will be closed even if the "keepconnection" was
547 specified. You should only keep the connection open if you plan to send
548 another message immediately. And you should not keep it open for
549 hundreds of emails even if you do send them all in a row.
550 This method should be called automatically when destructing the object,
552 but you should not rely on it. If you want to be sure your message WAS
553 processed by the server, you SHOULD call "Close" in Mail::Sender
554 explicitly.
555 Connect
557 This method gets called automatically. Do not call it yourself.
558 Connected
560 my $bool = $sender->Connected();
561 Returns an "undef" or true value to let you know if you're connected to
563 the mail server.
564 EndPart
566 $sender = $sender->EndPart($ctype);
567 Closes a multi-part part.
569 If the $ctype is not present or evaluates to false, only the current
571 SIMPLE part is closed! Don't do that unless you are really sure you
572 know what you are doing.
573 It's best to always pass to the "->EndPart()" the content type of the
575 corresponding "->Part()".
576 GetHandle
578 $sender->Open({...});
579 my $handle = $sender->GetHandle();
580 $handle->print("Hello world.\n");
581 my ($mday,$mon,$year) = (localtime())[3,4,5];
582 $handle->print(sprintf("Today is %04d/%02d/%02d.", $year+1900, $mon+1, $mday));
583 close $handle;
584 Returns a file handle to which you can print the message or file to
586 attach. The data you print to this handle will be encoded as necessary.
587 Closing this handle closes either the message (for single part
588 messages) or the part.
589 MailFile
591 # set parameters in an ordered list
592 # -- from, reply-to, to, smtp, subject, headers, message, files(s)
593 $sender = $sender->MailFile('from@foo.com','reply-to@bar.com','to@baz.com')
594 # OR use a hashref -- see the attributes section for a
595 # list of appropriate parameters.
596 $sender = $sender->MailFile({file => ['/file1','/file2'], msg => "Message"});
597 Sends one or more files by mail. If a message in $sender is opened, it
599 gets closed and a new message is created and sent. $sender is then
600 closed.
601 The "file" parameter may be a string file name, a comma-separated list
603 of filenames, or an array reference of filenames.
604 Keep in mind that parameters like "ctype", "charset" and "encoding"
606 will be used for the attached file, not the body of the message. If you
607 want to specify those parameters for the body, you have to use
608 "b_ctype", "b_charset" and "b_encoding".
609 MailMsg
611 # set parameters in an ordered list
612 # -- from, reply-to, to, smtp, subject, headers, message
613 $sender = $sender->MailMsg('from@foo.com','reply-to@bar.com','to@baz.com')
614 # OR use a hashref -- see the attributes section for a
615 # list of appropriate parameters.
616 $sender = $sender->MailMsg({from => "foo@bar.com", msg => "Message"});
617 Sends a message. If a message in $sender is opened, it gets closed and
619 a new message is created and sent. $sender is then closed.
620 new
622 # Create a new sender instance with only the 'from' address
623 my $sender = Mail::Sender->new('from_address@bar.com');
624 # Create a new sender with any attribute above set in a hashref
625 my $sender = Mail::Sender->new({attribute => 'value', });
626 # Create a new sender as a copy of an existing one
627 my $copy = $sender->new({another_attr => 'bar',});
628 Prepares a sender. Any attribute can be set during instance creation.
630 This doesn't start any connection to the server. You have to use
631 "$sender->Open" or "$sender->OpenMultipart" to start talking to the
632 server.
633 The attributes are used in subsequent calls to "$sender->Open" and
635 "$sender->OpenMultipart". Each such call changes the saved variables.
636 You can set "smtp", "from" and other options here and then use the info
637 in all messages.
638 Open
640 # set parameters in an ordered list
641 # -- from, reply-to, to, smtp, subject, headers
642 $sender = $sender->Open('from@foo.com','reply-to@bar.com','to@baz.com');
643 # OR use a hashref -- see the attributes section for a
644 # list of appropriate parameters.
645 $sender = $sender->Open({to=>'to@baz.com', subject=>'Incoming!!!'});
646 Opens a new message. The only additional parameter that may not be
648 specified directly in "new" in Mail::Sender is "messageid". If you set
649 this option, the message will be sent with that "Message-ID", otherwise
650 a new Message ID will be generated out of the sender's address, current
651 date+time and a random number (or by the function you specified in the
652 "createmessageid" attribute).
653 After the message is sent "$sender->{messageid}" will contain the
655 Message-ID with which the message was sent.
656 OpenMultipart
658 # set parameters in an ordered list
659 # -- from, reply-to, to, smtp, subject, headers, boundary
660 $sender = $sender->OpenMultipart('from@foo.com','reply-to@bar.com');
661 # OR use a hashref -- see the attributes section for a
662 # list of appropriate parameters.
663 $sender = $sender->OpenMultipart({to=>'to@baz.com', subject=>'Incoming!!!'});
664 Opens a multipart message.
666 Part
668 # set parameters in an ordered list
669 # -- description, ctype, encoding, disposition, content_id, Message
670 $sender = $sender->Part(
671 'something', 'text/plain', '7BIT', 'attachment; filename="send.pl"'
672 );
673 # OR use a hashref -- see the attributes section for a
674 # list of appropriate parameters.
675 $sender = $sender->Part({
676 description => "desc",
677 ctype => "application/octet-stream", # default
678 encoding => '7BIT', # default
679 disposition => 'attachment', # default
680 content_id => '#', # for auto-increment number, or * for filename
681 msg => '', # You don't have to specify here, you may use SendEnc()
682 # to add content to the part.
683 });
684 Prints a part header for the multipart message and (if specified) the
686 contents.
687 print
689 An alias for "SendEnc" in Mail::Sender.
690 QueryAuthProtocols
692 my @protocols = $sender->QueryAuthProtocols();
693 my @protocols = $sender->QueryAuthProtocols( $smtpserver);
694 Queries the server specified in the attributes or in the parameter to
696 this method for the authentication protocols it supports.
697 Send
699 $sender = $sender->Send(@strings);
700 Prints the strings to the socket. It doesn't add any line terminations
702 or encoding. You should use "\r\n" as the end-of-line!
703 UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD
705 USE "SendEnc" in Mail::Sender INSTEAD!
706 SendEnc
708 $sender = $sender->SendEnc(@strings);
709 Prints the bytes to the socket. It doesn't add any line terminations.
711 Encodes the text using the selected encoding: "none | Base64 |
712 Quoted-printable". You should use "\r\n" as the end-of-line!
713 SendEx
715 $sender = $sender->SendEx(@strings);
716 Prints the strings to the socket. Doesn't add any end-of-line
718 characters. Changes all end-of-lines to "\r\n". Doesn't encode the
719 data!
720 UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD
722 USE "SendEnc" in Mail::Sender INSTEAD!
723 SendFile
725 Alias for "Attach" in Mail::Sender
726 SendLine
728 $sender = $sender->SendLine(@strings);
729 Prints the strings to the socket. Each byte string is terminated by
731 "\r\n". No encoding is done. You should use "\r\n" as the end-of-line!
732 UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD
734 USE "SendLineEnc" in Mail::Sender INSTEAD!
735 SendLineEnc
737 $sender = $sender->SendLineEnc(@strings);
738 Prints the strings to the socket and adds the end-of-line character at
740 the end. Encodes the text using the selected encoding: "none | Base64
741 | Quoted-printable".
742 Do NOT mix up "Send" in Mail::Sender, "SendEx" in Mail::Sender,
744 "SendLine" in Mail::Sender, or "SendLineEx" in Mail::Sender with
745 "SendEnc" in Mail::Sender or "SendLineEnc" in Mail::Sender! "SendEnc"
746 in Mail::Sender does some buffering necessary for correct Base64
747 encoding, and "Send" in Mail::Sender and "SendEx" in Mail::Sender are
748 not aware of that.
749 Usage of "Send" in Mail::Sender, "SendEx" in Mail::Sender, "SendLine"
751 in Mail::Sender, and "SendLineEx" in Mail::Sender in non "xBIT" parts
752 is not recommended. Using "Send(encode_base64($string))" may work, but
753 more likely it will not! In particular, if you use several such to
754 create one part, the data is very likely to get crippled.
755 SendLineEx
757 $sender = $sender->SendLineEnc(@strings);
758 Prints the strings to the socket. Adds an end-of-line character at the
760 end. Changes all end-of-lines to "\r\n". Doesn't encode the data!
761 UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD
763 USE "SendLineEnc" in Mail::Sender INSTEAD!
764
766 Mail::Sender implements the following functions.
767 GuessCType
769 my $ctype = Mail::Sender::GuessCType($filename, $filepath);
770 Guesses the content type based on the filename or the file contents.
772 This function is used when you attach a file and do not specify the
773 content type. It is not exported by default!
774 MessageID
776 my $id = Mail::Sender::MessageID('from@foo.com');
777 Generates a "unique" message ID for a given from address.
779 ResetGMTdiff
781 Mail::Sender::ResetGMTdiff();
782 The module computes the local vs. GMT time difference to include in the
784 timestamps added into the message headers. As the time difference may
785 change due to summer savings time changes you may want to reset the
786 time difference occasionally in long running programs.
787
789 I'm sure there are many. Please let me know if you find any.
790 The problem with multi-line responses from some SMTP servers (namely
792 qmail <http://www.qmail.org/top.html>) is solved at last.
793
795 Email::Sender
796 There are lots of mail related modules on CPAN. Be wise, use
798 Email::Sender!
799
801 Jan Krynický <Jenda@Krynicky.cz> <http://Jenda.Krynicky.cz>
802
804 · Brian Blakley <bblakley@mp5.net>,
805 · Chase Whitener <capoeirab@cpan.org>,
807 · Ed McGuigan <itstech1@gate.net>,
809 · John Sanche <john@quadrant.net>
811 · Rodrigo Siqueira <rodrigo@insite.com.br>,
813
815 Copyright (c) 1997-2014 Jan Krynický <Jenda@Krynicky.cz>. All rights
816 reserved.
817 This program is free software; you can redistribute it and/or modify it
819 under the same terms as Perl itself.
820perl v5.30.1 2020-01-30 Mail::Sender(3)