1System::Command(3)    User Contributed Perl Documentation   System::Command(3)
2
3
4

NAME

6       System::Command - Object for running system commands
7

VERSION

9       version 1.119
10

SYNOPSIS

12           use System::Command;
13
14           # invoke an external command, and return an object
15           $cmd = System::Command->new( @cmd );
16
17           # options can be passed as a hashref
18           $cmd = System::Command->new( @cmd, \%option );
19
20           # $cmd is basically a hash, with keys / accessors
21           $cmd->stdin();     # filehandle to the process stdin (write)
22           $cmd->stdout();    # filehandle to the process stdout (read)
23           $cmd->stderr();    # filehandle to the process stdout (read)
24           $cmd->pid();       # pid of the child process
25
26           # find out if the child process died
27           if ( $cmd->is_terminated() ) {
28               # the handles are not closed yet
29               # but $cmd->exit() et al. are available if it's dead
30           }
31
32           # done!
33           $cmd->close();
34
35           # exit information
36           $cmd->exit();      # exit status
37           $cmd->signal();    # signal
38           $cmd->core();      # core dumped? (boolean)
39
40           # cut to the chase
41           my ( $pid, $in, $out, $err ) = System::Command->spawn(@cmd);
42

DESCRIPTION

44       System::Command is a class that launches external system commands and
45       return an object representing them, allowing to interact with them
46       through their "STDIN", "STDOUT" and "STDERR" handles.
47

METHODS

49       System::Command supports the following methods:
50
51   new
52           my $cmd = System::Command->new( @cmd )
53
54       Runs an external command using the list in @cmd.
55
56       If @cmd contains a hash reference, it is taken as an option hash.
57
58       If several option hashes are passed to "new()", they will be merged
59       together with individual values being overridden by those (with the
60       same key) from hashes that appear later in the list.
61
62       To allow subclasses to support their own set of options, unrecognized
63       options are silently ignored.
64
65       The recognized keys are:
66
67       "cwd"
68           The current working directory in which the command will be run.
69
70       "env"
71           A hashref containing key / values to add to the command
72           environment.
73
74           If several option hashes define the "env" key, the hashes they
75           point to will be merged into one (instead of the last one taking
76           precedence).
77
78           If a value is "undef", the variable corresponding to the key will
79           be removed from the environment.
80
81       "input"
82           A string that is send to the command's standard input, which is
83           then closed.
84
85           Using the empty string as "input" will close the command's standard
86           input without writing to it.
87
88           Using "undef" as "input" will not do anything. This behaviour
89           provides a way to modify previous options populated by some other
90           part of the program.
91
92           On some systems, some commands may close standard input on startup,
93           which will cause a SIGPIPE when trying to write to it. This will
94           raise an exception.
95
96       "interactive"
97           If true, the command will actually be run using the "system" in
98           perlfunc builtin. If "STDIN" is not a terminal, the constructor
99           will die.
100
101           Not reaper object will be created, and the "stdin", "stdout" and
102           "stderr" filehandles will point to dummy closed handles. The
103           "exit", "signal" and "core" attributes will be correctly set.
104
105           (Added in version 1.114.)
106
107       "setpgrp"
108           By default, the spawned process is made the leader of its own
109           process group using "setpgrp( 0, 0 )" (if possible). This enables
110           sending a signal to the command and all its child processes at
111           once:
112
113               # negative signal is sent to the process group
114               kill -SIGKILL, $cmd->pid;
115
116           Setting the "setpgrp" option to a false value disables this
117           behaviour.
118
119           (Added in version 1.110.)
120
121       "trace"
122           The "trace" option defines the trace settings for System::Command.
123           The "SYSTEM_COMMAND_TRACE" environment variable can be used to
124           specify a global trace setting at startup. The environment variable
125           overrides individual "trace" options.
126
127           If "trace" or "SYSTEM_COMMAND_TRACE" contains an "=" character then
128           what follows it is used as the name of the file to append the trace
129           to.  When using the "trace" option, it is recommended to use an
130           absolute path for the trace file, in case the main program
131           "chdir()" before calling System::Command.
132
133           At trace level 1, only the command line is shown:
134
135               System::Command cmd[12834]: /usr/bin/git commit -m "Test option hash in new()"
136
137           Note: Command-line parameters containing whitespace will be
138           properly quoted.
139
140           At trace level 2, the options values are shown:
141
142               System::Command opt[12834]: cwd => "/tmp/kHkPUBIVWd"
143               System::Command opt[12834]: fatal => {128 => 1,129 => 1}
144               System::Command opt[12834]: git => "/usr/bin/git"
145
146           Note: The "fatal" and "git" options in the example above are
147           actually used by Git::Repository to determine the command to be
148           run, and ignored by System::Command. References are dumped using
149           Data::Dumper.
150
151           At trace level 3, the content of the "env" option is also listed:
152
153               System::Command env[12834]: GIT_AUTHOR_EMAIL => "author\@example.com"
154               System::Command env[12834]: GIT_AUTHOR_NAME => "Example author"
155
156           If the command cannot be spawned, the trace will show "!" instead
157           of the pid:
158
159               System::Command cmd[!]: does-not-exist
160
161           (Added in version 1.108.)
162
163       exit
164       core
165       signal
166           The above three options can be set to point to a reference to a
167           scalar, which will be automatically updated when the command is
168           terminated. See the "Accessors" section for details about what the
169           attributes of the same name mean.
170
171           (Added in version 1.114.)
172
173       The System::Command object returned by "new()" has a number of
174       attributes defined (see below).
175
176   close
177           $cmd->close;
178
179       Close all pipes to the child process, collects exit status, etc.  and
180       defines a number of attributes (see below).
181
182       Returns the invocant, so one can do things like:
183
184           my $exit = $cmd->close->exit;
185
186   is_terminated
187           if ( $cmd->is_terminated ) {...}
188
189       Returns a true value if the underlying process was terminated.
190
191       If the process was indeed terminated, collects exit status, etc.  and
192       defines the same attributes as "close()", but does not close all pipes
193       to the child process.
194
195   spawn
196           my ( $pid, $in, $out, $err ) = System::Command->spawn(@cmd);
197
198       This shortcut method calls "new()" (and so accepts options in the same
199       manner) and directly returns the "pid", "stdin", "stdout" and "stderr"
200       attributes, in that order.
201
202       (Added in version 1.01.)
203
204   loop_on
205           $cmd->loop_on(
206               stdout => sub { ... },
207               stderr => sub { ... },
208           );
209
210       This method calls the corresponding code references with each line
211       produced on the standard output and errput of the command.
212
213       If the "stdout" or "stderr" argument is not given, the default is to
214       silently drop the data for "stdout", and to pass through (to STDERR)
215       the data for "stderr". To prevent any processing, pass a false value to
216       the parameter.
217
218       For example, the following line will silently run the command to
219       completion:
220
221           $cmd->loop_on( stderr => '' );
222
223       The method blocks until the command is completed (or rather, until its
224       output and errput handles have been closed), or until one of the
225       callbacks returns a false value.
226
227       Data is read using readline, which depends on $/ for its definition of
228       a "line". To that effect, the method takes a third optional argument,
229       "input_record_separator", which sets the value for $/ for the duration
230       of the call.
231
232       Caveat Emptor: since "loop_on" is line-based, it may block if either
233       output or errput sends incomplete lines (e.g. if the command is some
234       sort of interactive shell with a prompt).
235
236       The return value is true if the command exited with status 0, and false
237       otherwise (i.e. the Unix traditional definition of success).
238
239       (Added in version 1.117.)
240
241   Accessors
242       The attributes of a System::Command object are also accessible through
243       a number of accessors.
244
245       The object returned by "new()" will have the following attributes
246       defined:
247
248       cmdline
249           Return the command-line actually executed, as a list of strings.
250
251       options
252           The merged list of options used to run the command.
253
254       pid The PID of the underlying command.
255
256       stdin
257           A filehandle opened in write mode to the child process' standard
258           input.
259
260       stdout
261           A filehandle opened in read mode to the child process' standard
262           output.
263
264       stderr
265           A filehandle opened in read mode to the child process' standard
266           error output.
267
268       Regarding the handles to the child process, note that in the following
269       code:
270
271           my $fh = System::Command->new( @cmd )->stdout;
272
273       $fh is opened and points to the output handle of the child process,
274       while the anonymous System::Command object has been destroyed. Once $fh
275       is destroyed, the subprocess will be reaped, thus avoiding zombies.
276       (System::Command::Reaper undertakes this process.)
277
278       After the call to "close()" or after "is_terminated()" returns true,
279       the following attributes will be defined (note that the accessors
280       always run "is_terminated()", to improve their chance of getting a
281       value if the process just finished):
282
283       exit
284           The exit status of the underlying command.
285
286       signal
287           The signal, if any, that killed the command.
288
289       core
290           A boolean value indicating if the command dumped core.
291
292       Even when not having a reference to the System::Command object any
293       more, it's still possible to get the "exit", "core" or "signal" values,
294       using the options of the same name:
295
296           my $fh = System::Command->new( @cmd, { exit => \my $exit } )->stdout;
297
298       Once the command is terminated, the $exit variable will contain the
299       value that would have been returned by the "exit()" method.
300

CAVEAT EMPTOR

302       Note that System::Command uses "waitpid()" to catch the status
303       information of the child processes it starts. This means that if your
304       code (or any module you "use") does something like the following:
305
306           local $SIG{CHLD} = 'IGNORE';    # reap child processes
307
308       System::Command will not be able to capture the "exit", "signal" and
309       "core" attributes. It will instead set all of them to the impossible
310       value "-1", and display the warning "Child process already reaped,
311       check for a SIGCHLD handler".
312
313       To silence this warning (and accept the impossible status information),
314       load System::Command with:
315
316           use System::Command -quiet;
317
318       It is also possible to more finely control the warning by setting the
319       $System::Command::QUIET variable (the warning is not emitted if the
320       variable is set to a true value).
321
322       If the subprocess started by System::Command has a short life
323       expectancy, and no other child process is expected to die during that
324       time, you could even disable the handler locally (use at your own
325       risks):
326
327           {
328               local $SIG{CHLD};
329               my $cmd = System::Command->new(@cmd);
330               ...
331           }
332

AUTHOR

334       Philippe Bruhat (BooK), "<book at cpan.org>"
335

ACKNOWLEDGEMENTS

337       Thanks to Alexis Sukrieh (SUKRIA) who, when he saw the description of
338       Git::Repository::Command during my talk at OSDC.fr 2010, asked why it
339       was not an independent module. This module was started by taking out of
340       Git::Repository::Command 1.08 the parts that weren't related to Git.
341
342       Thanks to Christian Walde (MITHALDU) for his help in making this module
343       work better under Win32.
344
345       The System::Command::Reaper class was added after the addition of
346       Git::Repository::Command::Reaper in Git::Repository::Command 1.11.  It
347       was later removed from System::Command version 1.03, and brought back
348       from the dead to deal with the zombie apocalypse in version 1.106.  The
349       idea of a reaper class comes from Vincent Pit.
350
351       Thanks to Tim Bunce for using Git::Repository and making many
352       suggestions based on his use and needs. Most of them turned into
353       improvement for System::Command instead, once we figured out that the
354       more general feature idea really belonged there.
355

BUGS

357       Please report any bugs or feature requests to "bug-system-command at
358       rt.cpan.org", or through the web interface at
359       <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=System-Command>.  I
360       will be notified, and then you'll automatically be notified of progress
361       on your bug as I make changes.
362

SUPPORT

364       You can find documentation for this module with the perldoc command.
365
366           perldoc System::Command
367
368       You can also look for information at:
369
370       ·   RT: CPAN's request tracker
371
372           <http://rt.cpan.org/NoAuth/Bugs.html?Dist=System-Command>
373
374       ·   AnnoCPAN: Annotated CPAN documentation
375
376           <http://annocpan.org/dist/System-Command>
377
378       ·   CPAN Ratings
379
380           <http://cpanratings.perl.org/d/System-Command>
381
382       ·   Search CPAN
383
384           <http://search.cpan.org/dist/System-Command/>
385
387       Copyright 2010-2016 Philippe Bruhat (BooK).
388

LICENSE

390       This program is free software; you can redistribute it and/or modify it
391       under the terms of either: the GNU General Public License as published
392       by the Free Software Foundation; or the Artistic License.
393
394       See <http://dev.perl.org/licenses/> for more information.
395
396
397
398perl v5.30.1                      2020-01-30                System::Command(3)
Impressum