1FSTAB(5)                         File Formats                         FSTAB(5)
2
3
4

NAME

6       fstab - static information about the filesystems
7

SYNOPSIS

9       /etc/fstab
10

DESCRIPTION

12       The  file  fstab contains descriptive information about the filesystems
13       the system can mount.  fstab is only read by programs, and not written;
14       it is the duty of the system administrator to properly create and main‐
15       tain this file.  The order of records in  fstab  is  important  because
16       fsck(8),  mount(8),  and  umount(8)  sequentially iterate through fstab
17       doing their thing.
18
19       Each filesystem is described on a separate line.  Fields on  each  line
20       are separated by tabs or spaces.  Lines starting with '#' are comments.
21       Blank lines are ignored.
22
23       The following is a typical example of an fstab entry:
24
25              LABEL=t-home2   /home      ext4    defaults,auto_da_alloc      0
26              2
27
28       The first field (fs_spec).
29              This field describes the block special device or remote filesys‐
30              tem to be mounted.
31
32              For ordinary mounts, it will hold (a link to)  a  block  special
33              device  node  (as  created  by  mknod(2))  for  the device to be
34              mounted, like `/dev/cdrom' or `/dev/sdb7'.  For NFS mounts, this
35              field  is <host>:<dir>, e.g., `knuth.aeb.nl:/'.  For filesystems
36              with no storage, any string can be used, and  will  show  up  in
37              df(1)  output, for example.  Typical usage is `proc' for procfs;
38              `mem', `none', or `tmpfs' for tmpfs.  Other special filesystems,
39              like udev and sysfs, are typically not listed in fstab.
40
41              LABEL=<label>  or  UUID=<uuid>  may be given instead of a device
42              name.  This is the recommended method, as device names are often
43              a  coincidence  of hardware detection order, and can change when
44              other disks are added or removed.  For example, `LABEL=Boot'  or
45              `UUID=3e6be9de-8139-11d1-9106-a43f08d823a6'.  (Use a filesystem-
46              specific tool like e2label(8), xfs_admin(8), or  fatlabel(8)  to
47              set LABELs on filesystems).
48
49              It's also possible to use PARTUUID= and PARTLABEL=. These parti‐
50              tions identifiers are supported for example for  GUID  Partition
51              Table (GPT).
52
53              See mount(8), blkid(8) or lsblk(8) for more details about device
54              identifiers.
55
56
57              Note that mount(8) uses UUIDs as strings. The string representa‐
58              tion of the UUID should be based on lower case characters.
59
60       The second field (fs_file).
61              This  field  describes the mount point (target) for the filesys‐
62              tem.  For swap partitions, this field  should  be  specified  as
63              `none'.  If  the name of the mount point contains spaces or tabs
64              these can be escaped as `\040' and '\011' respectively.
65
66       The third field (fs_vfstype).
67              This field describes the type of the filesystem.  Linux supports
68              many  filesystem types: ext4, xfs, btrfs, f2fs, vfat, ntfs, hfs‐
69              plus, tmpfs, sysfs, proc, iso9660, udf, squashfs, nfs, cifs, and
70              many more.  For more details, see mount(8).
71
72              An  entry  swap denotes a file or partition to be used for swap‐
73              ping, cf. swapon(8).  An entry none is useful for bind  or  move
74              mounts.
75
76              More than one type may be specified in a comma-separated list.
77
78              mount(8) and umount(8) support filesystem subtypes.  The subtype
79              is defined by '.subtype' suffix.  For example 'fuse.sshfs'. It's
80              recommended  to  use subtype notation rather than add any prefix
81              to the first fstab field  (for  example  'sshfs#example.com'  is
82              deprecated).
83
84       The fourth field (fs_mntops).
85              This  field  describes  the  mount  options  associated with the
86              filesystem.
87
88              It is formatted as a comma-separated list of options.   It  con‐
89              tains at least the type of mount (ro or rw), plus any additional
90              options appropriate to the filesystem  type  (including  perfor‐
91              mance-tuning options).  For details, see mount(8) or swapon(8).
92
93              Basic filesystem-independent options are:
94
95              defaults
96                     use  default  options: rw, suid, dev, exec, auto, nouser,
97                     and async.
98
99              noauto do not mount when "mount -a"  is  given  (e.g.,  at  boot
100                     time)
101
102              user   allow a user to mount
103
104              owner  allow device owner to mount
105
106              comment
107                     or x-<name> for use by fstab-maintaining programs
108
109              nofail do  not  report  errors  for  this  device if it does not
110                     exist.
111
112       The fifth field (fs_freq).
113              This field is used by dump(8)  to  determine  which  filesystems
114              need  to  be  dumped.   Defaults  to  zero  (don't  dump) if not
115              present.
116
117       The sixth field (fs_passno).
118              This field is used by fsck(8) to determine the  order  in  which
119              filesystem  checks  are  done at boot time.  The root filesystem
120              should be specified with a fs_passno of  1.   Other  filesystems
121              should  have  a fs_passno of 2.  Filesystems within a drive will
122              be checked sequentially, but  filesystems  on  different  drives
123              will  be  checked at the same time to utilize parallelism avail‐
124              able in the hardware.  Defaults to  zero  (don't  fsck)  if  not
125              present.
126
127

NOTES

129       The proper way to read records from fstab is to use the routines getmn‐
130       tent(3) or libmount.
131
132       The keyword ignore as a filesystem type (3rd field) is no  longer  sup‐
133       ported  by  the  pure  libmount  based  mount utility (since util-linux
134       v2.22).
135
136

FILES

138       /etc/fstab, <fstab.h>
139

SEE ALSO

141       getmntent(3), fs(5), findmnt(8), mount(8), swapon(8)
142

HISTORY

144       The ancestor of this fstab file format appeared in 4.0BSD.
145

AVAILABILITY

147       This man page is part of the util-linux package and is  available  from
148       https://www.kernel.org/pub/linux/utils/util-linux/.
149
150
151
152util-linux                       February 2015                        FSTAB(5)
Impressum