1NSS-MYHOSTNAME(8)               nss-myhostname               NSS-MYHOSTNAME(8)
2
3
4

NAME

6       nss-myhostname, libnss_myhostname.so.2 - Provide hostname resolution
7       for the locally configured system hostname.
8

SYNOPSIS

10       libnss_myhostname.so.2
11

DESCRIPTION

13       nss-myhostname is a plug-in module for the GNU Name Service Switch
14       (NSS) functionality of the GNU C Library (glibc), primarily providing
15       hostname resolution for the locally configured system hostname as
16       returned by gethostname(2). The precise hostnames resolved by this
17       module are:
18
19       ·   The local, configured hostname is resolved to all locally
20           configured IP addresses ordered by their scope, or — if none are
21           configured — the IPv4 address 127.0.0.2 (which is on the local
22           loopback) and the IPv6 address ::1 (which is the local host).
23
24       ·   The hostnames "localhost" and "localhost.localdomain" (as well as
25           any hostname ending in ".localhost" or ".localhost.localdomain")
26           are resolved to the IP addresses 127.0.0.1 and ::1.
27
28       ·   The hostname "_gateway" is resolved to all current default routing
29           gateway addresses, ordered by their metric. This assigns a stable
30           hostname to the current gateway, useful for referencing it
31           independently of the current network configuration state.
32
33       Various software relies on an always-resolvable local hostname. When
34       using dynamic hostnames, this is traditionally achieved by patching
35       /etc/hosts at the same time as changing the hostname. This is
36       problematic since it requires a writable /etc file system and is
37       fragile because the file might be edited by the administrator at the
38       same time. With nss-myhostname enabled, changing /etc/hosts is
39       unnecessary, and on many systems, the file becomes entirely optional.
40
41       To activate the NSS modules, add "myhostname" to the line starting with
42       "hosts:" in /etc/nsswitch.conf.
43
44       It is recommended to place "myhostname" last in the nsswitch.conf'
45       "hosts:" line to make sure that this mapping is only used as fallback,
46       and that any DNS or /etc/hosts based mapping takes precedence.
47

EXAMPLE

49       Here is an example /etc/nsswitch.conf file that enables nss-myhostname
50       correctly:
51
52           passwd:         compat mymachines systemd
53           group:          compat mymachines systemd
54           shadow:         compat
55
56           hosts:          files mymachines resolve [!UNAVAIL=return] dns myhostname
57           networks:       files
58
59           protocols:      db files
60           services:       db files
61           ethers:         db files
62           rpc:            db files
63
64           netgroup:       nis
65
66       To test, use glibc's getent tool:
67
68           $ getent ahosts `hostname`
69           ::1       STREAM omega
70           ::1       DGRAM
71           ::1       RAW
72           127.0.0.2       STREAM
73           127.0.0.2       DGRAM
74           127.0.0.2       RAW
75
76       In this case, the local hostname is omega.
77

SEE ALSO

79       systemd(1), nss-systemd(8), nss-resolve(8), nss-mymachines(8),
80       nsswitch.conf(5), getent(1)
81
82
83
84systemd 245                                                  NSS-MYHOSTNAME(8)
Impressum