1FLDIGI(1) FLDIGI(1)
2
6 fldigi - digital modem program for hamradio operators
7
9 fldigi [OPTIONS]
10
12 Fldigi is a cross-platform multi-modem program for most of the digital
13 modes used by radio amateurs today: CW, PSK, MFSK, MT-63, RTTY,
14 Hellschreiber, DominoEX, Olivia, THOR and Throb are all supported. It
15 can also help calibrate a sound card to a time signal and do on-air
16 frequency measurement tests. Fldigi features basic rig control,
17 logging, and contest operation, “panoramic” PSK decoding, a PSK
18 Reporter client, and remote control via XML-RPC.
19
21 Long options begin with two hyphens and are handled by fldigi. The
22 option names may be abbreviated to any unambiguous substring, and the
23 option argument may be separated from the name by a space or equals
24 sign, as per getopt(3).
25 Short options begin with a single hyphen and are passed directly to
27 FLTK. They may be abbreviated only as indicated.
28 --config-dir DIRECTORY
30 Look for and store configuration files in directory DIRECTORY,
31 which is created if it does not exist. Defaults to “$HOME/.fldigi”.
32 --rx-ipc-key KEY
34 Set the receive message queue key. May be given in hex if prefixed
35 with “0x”. Defaults to “9876” or “0x2694”.
36 --tx-ipc-key KEY
38 Set the transmit message queue key. May be given in hex if prefixed
39 with “0x”. Defaults to “6789” or “0x1a85”.
40 --arq-server-address HOSTNAME
42 Set the ARQ TCP server address. Defaults to “127.0.0.1”. HOSTNAME
43 may be any node name string accepted by getaddrinfo(3).
44 --arq-server-port PORT
46 Set the ARQ TCP server port. Defaults to “7322”. PORT may be any
47 service name string accepted by getaddrinfo(3).
48 Note
50 The --xmlrpc-* options are only available if fldigi was built with
51 XML-RPC support.
52 --xmlrpc-server-address HOSTNAME
54 Set the XML-RPC server address. Defaults to “127.0.0.1”.
55 --xmlrpc-server-port PORT
57 Set the XML-RPC server port. Defaults to “7362”.
58 --xmlrpc-allow REGEX
60 Allow only the methods whose names match REGEX. REGEX is a POSIX
61 extended regular expression.
62 --xmlrpc-deny REGEX
64 Allow only the methods whose names do not match REGEX.
65 --xmlrpc-list
67 List all available XML-RPC methods and exit. May be preceded by the
68 --xmlrpc-allow or --xmlrpc-deny options to verify their effect.
69 --cpu-speed-test
71 Perform the CPU speed test that is normally done when fldigi is run
72 without an existing configuration directory. Results are shown in
73 the event log and options may be changed to the recommended values
74 for the measured CPU speed.
75 --noise
77 Unhide controls for adding noise to the transmitted signal.
78 --wfall-only
80 Hide all main window widgets except the menu bar and waterfall
81 (with its associated controls). Meant to be used with external
82 programs that control fldigi with XML-RPC.
83 --debug-level LEVEL
85 Set the event log verbosity. LEVEL is clamped to the range [0,5];
86 for Quiet, Error, Warning, Info, Verbose and Debug. Defaults to “3”
87 (Info).
88 --version
90 Print version information and exit.
91 --build-info
93 Print build information and exit.
94 --help
96 Print options summary and exit.
97 Standard FLTK options
99 -bg, -background COLOUR
100 Set the background colour.
101 -bg2, -background2 COLOUR
103 Set the secondary (text) background colour.
104 -di, -display DISPLAY
106 Specifies the X server to connect to; see X(7).
107 -dn, -dnd or -nodn, -nodnd
109 Enable or disable drag and drop copy and paste in text fields.
110 -fg, -foreground COLOUR
112 Set the foreground colour.
113 -g, -geometry GEOMETRY
115 Set the initial window size and position. Fldigi may not honour
116 this option.
117 -i, -iconic
119 Start fldigi in iconified state. Fldigi may not honour this
120 option.
121 -k, -kbd or -nok, -nokbd
123 Enable or disable visible keyboard focus in non-text widgets.
124 -na, -name CLASSNAME
126 Set the window class. Defaults to “Fldigi”.
127 -ti, -title WINDOWTITLE
129 Set the window title. Defaults to “fldigi - <callsign>”.
130 Additional UI options
132 --font FONT[:SIZE]
133 Set the widget font and (optionally) size. Defaults to “sans:12”.
134 Options useful to developers
136 Note
137 The --benchmark-* options are only enabled if fldigi was built
138 (exclusively) for benchmarking and batch decoding.
139 --benchmark-modem ID
141 Specify the modem. Defaults to “25” (“BPSK31”).
142 --benchmark-frequency FREQ
144 Set the modem frequency in Hz. Defaults to “1000”.
145 --benchmark-afc BOOLEAN
147 Enable or disable modem AFC. Defaults to “false”.
148 --benchmark-squelch BOOLEAN
150 Enable or disable modem squelch. Defaults to “false”.
151 --benchmark-squelch-level LEVEL
153 Set the modem squelch level (1—100%). Defaults to “0.0”.
154 --benchmark-input INPUT
156 Specify the input. Must be a positive integer indicating the number
157 of samples of silence to generate as the input, or, if fldigi was
158 linked with libsndfile, the name of the input audio file. The
159 filename must contain non-digit characters.
160 --benchmark-output FILE
162 Specify the output data file. Non-textual output (i.e.
163 Hellschreiber or MFSK images) cannot be saved. Default: decoder
164 output is discarded.
165 --benchmark-src-ratio RATIO
167 Specify the sample rate conversion ratio. Defaults to “1.0” (input
168 is not resampled).
169 --benchmark-src-type TYPE
171 Set the sample rate conversion type. TYPE is an integer in the
172 range [0,4]. Defaults to “2” (“Fastest SINC Interpolator”).
173 Warning
175 The following options should not be relied upon. They are listed
176 here only for the sake of completeness, and may be replaced by GUI
177 settings or removed altogether in a future version.
178 --wfall-width WIDTH
180 Set the waterfall width.
181 --wfall-height HEIGHT
183 Set the waterfall height.
184 --window-width WIDTH
186 Set the minimum window width.
187 --window-height HEIGHT
189 Set the minimum window height.
190 --exit-after SECONDS
192 Run for approximately SECONDS seconds.
193 --frames-per-buffer FRAMES
195 Set frames per buffer option to FRAMES when creating PortAudio
196 streams. Defaults to “0” (let PortAudio choose).
197
199 Fldigi uses several environment variables, mainly set for child
200 processes created by the <EXEC> macro and the notifier.
201 General variables
203 FLDIGI_BROWSER
204 The web browser to use for http and file URIs. Overrides $BROWSER
205 and xdg-open(1).
206 Macro variables
208 The following variables are created in the environment of the child
209 process that is forked by the <EXEC> macro. They are empty if values
210 are not available.
211 FLDIGI_RX_IPC_KEY
213 The receive message queue key.
214 FLDIGI_TX_IPC_KEY
216 The transmit message queue key.
217 FLDIGI_XMLRPC_ADDRESS
219 The XML-RPC server address string.
220 FLDIGI_XMLRPC_PORT
222 The XML-RPC server port string.
223 FLDIGI_ARQ_ADDRESS
225 The ARQ server address string.
226 FLDIGI_ARQ_PORT
228 The ARQ server port string.
229 FLDIGI_VERSION
231 The version string.
232 FLDIGI_PID
234 The process ID of the parent fldigi process.
235 FLDIGI_CONFIG_DIR
237 The configuration directory.
238 FLDIGI_MY_CALL
240 The operator’s callsign.
241 FLDIGI_MY_NAME
243 The operator’s name.
244 FLDIGI_MY_LOCATOR
246 The operator’s IARU (Maidenhead) locator.
247 FLDIGI_MODEM
249 The short modem name.
250 FLDIGI_MODEM_LONG_NAME
252 The long modem name.
253 FLDIGI_DIAL_FREQUENCY
255 The rig (radio) frequency.
256 FLDIGI_AUDIO_FREQUENCY
258 The modem (audio) centre frequency.
259 FLDIGI_FREQUENCY
261 The actual receive/transmit frequency, i.e. the sum of rig and
262 modem frequencies taking into account the rig sideband.
263 FLDIGI_LOG_FREQUENCY
265 The text (frequency in MHz) contained in the QSO Freq log field.
266 FLDIGI_LOG_TIME_ON
268 The text (QSO start time) contained in the (time) On log field.
269 FLDIGI_LOG_TIME_OFF
271 The text (QSO end time) contained in the (time) Off log field.
272 FLDIGI_LOG_CALL
274 The text (other station’s callsign) contained in the Call log
275 field.
276 FLDIGI_LOG_NAME
278 The text (other station’s name) contained in the Name log field.
279 FLDIGI_LOG_RST_IN
281 The text (received RST) contained in the (RST) In log field.
282 FLDIGI_LOG_RST_OUT
284 The text (sent RST) contained in the (RST) Out log field.
285 FLDIGI_LOG_QTH
287 The text (other station’s QTH) contained in the QTH log field.
288 FLDIGI_LOG_LOCATOR
290 The text (other station’s Maidenhead locator) contained in the Loc
291 log field.
292 FLDIGI_LOG_NOTES
294 The text (free-form notes) contained in the Notes log field.
295 FLDIGI_AZ
297 The text (azimuth in degrees to other station) contained in the Az
298 log field.
299 Notifier variables
301 The following variables are created in the environment of child
302 processes created by the notifier.
303 FLDIGI_NOTIFY_STRi
305 These variables (i in [0,9]) contain substrings matched by
306 capturing groups in the event’s regular expression. 0 contains the
307 whole matched text.
308 FLDIGI_NOTIFY_STR_NUM
310 The number of substrings available.
311 FLDIGI_NOTIFY_CALLSIGN
313 Builtin event types that match callsigns will place the callsign in
314 this variable.
315 FLDIGI_NOTIFY_TEXT
317 The complete string that matched the event’s regular expression.
318 FLDIGI_NOTIFY_AUDIO_FREQUENCY
320 The modem frequency.
321 FLDIGI_NOTIFY_EVENT
323 The event type.
324 FLDIGI_NOTIFY_COUNTRY
326 The station’s country name (for events of type "station heard
327 twice").
328 Debugging variables
330 The following variables are only used if fldigi was built with
331 debugging support (--enable-debug), or they are only useful when
332 debugging specific modules.
333 FLDIGI_NO_EXEC
335 If set, this variable disables glibc’s malloc debugging, which
336 fldigi enables by default when built for debugging.
337 FLDIGI_TRACE_LOCKS
339 Traces Fl::lock() calls.
340 FLDIGI_HAMLIB_DEBUG
342 Initialises hamlib in debug mode.
343
345 Fldigi is licensed under the GNU GPL, which grants you the right to run
346 the program for any purpose (freedom 0). However, permission to use it
347 for the transmission of radio signals can only be obtained from the
348 communications authority of your country. When given, this permission
349 almost always comes in the form of an amateur radio license.
350 If you do not have an amateur radio license you can still have fun
352 using fldigi as a shortwave listener. One way to do so is by using the
353 builtin PSK Reporter client to submit realtime spots of transmitting
354 stations; see RESOURCES below. All you need is a computer, homebrew SDR
355 receiver, and simple wire antenna!
356
358 Various files and subdirectories are created in $HOME/.fldigi. Some of
359 the most interesting ones are listed below.
360 fldigi_def.xml
362 The main settings file.
363 fldigi.prefs
365 The “status” file. Stores window geometries, button states, current
366 modem, current audio frequency, squelch level, and so on.
367 status_log.txt
369 The event log.
370 macros/macros.mdf
372 The default macro file.
373 palettes/
375 This directory contains waterfall palettes.
376 scripts/
378 This directory is added to the PATH environment variable of the
379 child process that runs <EXEC> macros.
380 logs/
382 This directory contains logged received and sent text (when such
383 logging is enabled), including the default logbook database,
384 logbook.adif.
385 images/
387 Received MFSK images are automatically saved in this directory.
388 freqanalysis.csv
390 This file is written by the frequency analysis modem. The fields
391 are dial frequency, audio frequency, and offset. See documentation
392 for details.
393 Note
395 The following files are used if present. They must be downloaded
396 and copied to ~/.fldigi/ by the user.
397 cty.dat
399 List of DXCC entities and callsign prefixes; used to display
400 tooltips in the received text buffer, and also to auto-fill the
401 Country, Locator and Azimuth log fields. Available at
402 http://www.country-files.com/cty/.
403 lotw1.txt
405 List of known LOTW users (one callsign per line); used for the
406 received text tooltips. Available at http://www.hb9bza.net/lotw/.
407 AGMemberList.txt or eqsl.txt
409 List of “Authenticity Guaranteed” eQSL users (one callsign per
410 line); used for the received text tooltips. Available at
411 http://www.eqsl.cc/QSLcard/Programming.cfm.
412
414 fldigi --wfall-height 144 --font sans:11 -fg "#c0c0c0" -bg "#5f5f63"
415 -bg2 "#19213b"
416 This is how the author of this document invokes fldigi.
417 fldigi --xmlrpc-deny "main.(tx|tune|run_macro)"
419 Unregister XML-RPC methods that may transmit.
420 ssh -L 7362:localhost:7362 remote-host xvfb-run fldigi -display :99
422 Start fldigi on remote-host under a “fake” X server. (The
423 xvfb-run(1) utility is available on Debian systems). The remote
424 “headless” fldigi is then controlled via XML-RPC on port 7362, i.e
425 from flrig, flamp etc.
426 fldigi --benchmark-input 480000 --benchmark-modem 1
428 Benchmark the DominoEX-4 modem with 480K audio samples.
429 fldigi --benchmark-input audio.wav --benchmark-modem 25
431 --benchmark-frequency 1500 --benchmark-afc 1 --benchmark-squelch 1
432 --benchmark-squelch-level 5.0 --benchmark-output out.txt
433 Read audio.wav (whose sample rate must be 8000Hz in this case) and
434 decode BPSK-31 signals at 1500Hz. AFC is enabled and the squelch is
435 set to 5%. Decoded text is saved to out.txt.
436
438 Yes.
439
441 fldigi-shell(1), gmfsk(1), gpsk31(1), grig(1), rigctl(1), xlog(1),
442 getaddrinfo(3), getopt(3), regex(7), X(7)
443
445 Main web site: http://www.w1hkj.com/Fldigi.html
446 Sourceforge project page: http://sourceforge.net/projects/fldigi/
448 Wiki and bug tracker: https://fedorahosted.org/fldigi/
450 More information on MFSK16, DominoEX and other digital modes can be
452 found at http://www.qsl.net/zl1bpu/ and
453 http://www.w1hkj.com/FldigiHelp/Modes/index.htm
454 The PSK Automatic Propagation Reporter site can be found at
456 http://www.pskreporter.info/
457
459 Fldigi was written by
460 · David Freese, W1HKJ.
462 · Stelios Bounanos, M0GLD.
464 · Leigh L. Klotz, Jr., WA5ZNU.
466 Fldigi also includes code written by others. Among them are
468 · Tomi Manninen, OH2BNS.
470 · Pawel Jalocha, SP9VRC.
472 · Hamish Moffatt, VK3SB.
474 This manual page was written by Stelios Bounanos
476 <sb[at]enotty(dot)net>.
477
479 License GPLv3+: GNU GPL version 3 or later.
480 08/10/2020 FLDIGI(1)