1LLVM-READOBJ(1) LLVM LLVM-READOBJ(1)
2
3
4
6 llvm-readobj - LLVM Object Reader
7
9 llvm-readobj [options] [input...]
10
12 The llvm-readobj tool displays low-level format-specific information
13 about one or more object files.
14
15 If input is "-" or omitted, llvm-readobj reads from standard input.
16 Otherwise, it will read from the specified filenames.
17
19 llvm-readelf is an alias for the llvm-readobj tool with a slightly dif‐
20 ferent command-line interface and output that is GNU compatible. Fol‐
21 lowing is a list of differences between llvm-readelf and llvm-readobj:
22
23 · llvm-readelf uses GNU for the --elf-output-style option by default.
24 llvm-readobj uses LLVM.
25
26 · llvm-readelf allows single-letter grouped flags (e.g. llvm-readelf
27 -SW is the same as llvm-readelf -S -W). llvm-readobj does not allow
28 grouping.
29
30 · llvm-readelf provides -s as an alias for --symbols, for GNU readelf
31 compatibility, whereas it is an alias for --section-headers in
32 llvm-readobj.
33
34 · llvm-readobj provides -t as an alias for --symbols. llvm-readelf
35 does not.
36
37 · llvm-readobj provides --sr, --sd, --st and --dt as aliases for
38 --section-relocations, --section-data, --section-symbols and
39 --dyn-symbols respectively. llvm-readelf does not provide these
40 aliases, to avoid conflicting with grouped flags.
41
43 These options are applicable to more than one file format, or are unre‐
44 lated to file formats.
45
46 --all Equivalent to specifying all the main display options relevant
47 to the file format.
48
49 --addrsig
50 Display the address-significance table.
51
52 --color
53 Use colors in the output for warnings and errors.
54
55 --expand-relocs
56 When used with --relocations, display each relocation in an
57 expanded multi-line format.
58
59 --file-headers, -h
60 Display file headers.
61
62 --headers, -e
63 Equivalent to setting: --file-headers, --program-headers, and
64 --sections.
65
66 --help Display a summary of command line options.
67
68 --help-list
69 Display an uncategorized summary of command line options.
70
71 --hex-dump=<section[,section,...]>, -x
72 Display the specified section(s) as hexadecimal bytes. section
73 may be a section index or section name.
74
75 --needed-libs
76 Display the needed libraries.
77
78 --relocations, --relocs, -r
79 Display the relocation entries in the file.
80
81 --sections, --section-headers, -s, -S
82 Display all sections.
83
84 --section-data, --sd
85 When used with --sections, display section data for each section
86 shown. This option has no effect for GNU style output.
87
88 --section-relocations, --sr
89 When used with --sections, display relocations for each section
90 shown. This option has no effect for GNU style output.
91
92 --section-symbols, --st
93 When used with --sections, display symbols for each section
94 shown. This option has no effect for GNU style output.
95
96 --stackmap
97 Display contents of the stackmap section.
98
99 --string-dump=<section[,section,...]>, -p
100 Display the specified section(s) as a list of strings. section
101 may be a section index or section name.
102
103 --symbols, --syms, -t
104 Display the symbol table.
105
106 --unwind, -u
107 Display unwind information.
108
109 --version
110 Display the version of the llvm-readobj executable.
111
112 @<FILE>
113 Read command-line options from response file <FILE>.
114
116 The following options are implemented only for the ELF file format.
117
118 --arch-specific, -A
119 Display architecture-specific information, e.g. the ARM
120 attributes section on ARM.
121
122 --demangle, -C
123 Display demangled symbol names in the output.
124
125 --dependent-libraries
126 Display the dependent libraries section.
127
128 --dyn-relocations
129 Display the dynamic relocation entries.
130
131 --dyn-symbols, --dyn-syms, --dt
132 Display the dynamic symbol table.
133
134 --dynamic-table, --dynamic, -d
135 Display the dynamic table.
136
137 --cg-profile
138 Display the callgraph profile section.
139
140 --elf-hash-histogram, --histogram, -I
141 Display a bucket list histogram for dynamic symbol hash tables.
142
143 --elf-linker-options
144 Display the linker options section.
145
146 --elf-output-style=<value>
147 Format ELF information in the specified style. Valid options are
148 LLVM and GNU. LLVM output (the default) is an expanded and
149 structured format, whilst GNU output mimics the equivalent GNU
150 readelf output.
151
152 --elf-section-groups, --section-groups, -g
153 Display section groups.
154
155 --gnu-hash-table
156 Display the GNU hash table for dynamic symbols.
157
158 --hash-symbols
159 Display the expanded hash table with dynamic symbol data.
160
161 --hash-table
162 Display the hash table for dynamic symbols.
163
164 --notes, -n
165 Display all notes.
166
167 --program-headers, --segments, -l
168 Display the program headers.
169
170 --raw-relr
171 Do not decode relocations in RELR relocation sections when dis‐
172 playing them.
173
174 --section-mapping
175 Display the section to segment mapping.
176
177 --stack-sizes
178 Display the contents of the stack sizes section(s), i.e. pairs
179 of function names and the size of their stack frames. Currently
180 only implemented for GNU style output.
181
182 --version-info, -V
183 Display version sections.
184
186 The following options are implemented only for the Mach-O file format.
187
188 --macho-data-in-code
189 Display the Data in Code command.
190
191 --macho-dsymtab
192 Display the Dsymtab command.
193
194 --macho-indirect-symbols
195 Display indirect symbols.
196
197 --macho-linker-options
198 Display the Mach-O-specific linker options.
199
200 --macho-segment
201 Display the Segment command.
202
203 --macho-version-min
204 Display the version min command.
205
207 The following options are implemented only for the PE/COFF file format.
208
209 --codeview
210 Display CodeView debug information.
211
212 --codeview-ghash
213 Enable global hashing for CodeView type stream de-duplication.
214
215 --codeview-merged-types
216 Display the merged CodeView type stream.
217
218 --codeview-subsection-bytes
219 Dump raw contents of CodeView debug sections and records.
220
221 --coff-basereloc
222 Display the .reloc section.
223
224 --coff-debug-directory
225 Display the debug directory.
226
227 --coff-directives
228 Display the .drectve section.
229
230 --coff-exports
231 Display the export table.
232
233 --coff-imports
234 Display the import table.
235
236 --coff-load-config
237 Display the load config.
238
239 --coff-resources
240 Display the .rsrc section.
241
243 llvm-readobj returns 0 under normal operation. It returns a non-zero
244 exit code if there were any errors.
245
247 llvm-nm(1), llvm-objdump(1), llvm-readelf(1)
248
250 Maintained by the LLVM Team (https://llvm.org/).
251
253 2003-2020, LLVM Project
254
255
256
257
25811 2020-10-15 LLVM-READOBJ(1)