1SLAPD-SOCK(5) File Formats Manual SLAPD-SOCK(5)
2
3
4
6 slapd-sock - Socket backend/overlay to slapd
7
9 /etc/openldap/slapd.conf
10
12 The Socket backend to slapd(8) uses an external program to handle
13 queries, similarly to slapd-shell(5). However, in this case the exter‐
14 nal program listens on a Unix domain socket. This makes it possible to
15 have a pool of processes, which persist between requests. This allows
16 multithreaded operation and a higher level of efficiency. The external
17 program must have been started independently; slapd(8) itself will not
18 start it.
19
20 This module may also be used as an overlay on top of some other data‐
21 base. Use as an overlay allows external actions to be triggered in
22 response to operations on the main database.
23
25 These slapd.conf options apply to the SOCK backend database. That is,
26 they must follow a "database sock" line and come before any subsequent
27 "backend" or "database" lines. Other database options are described in
28 the slapd.conf(5) manual page.
29
30 Alternatively, to use this module as an overlay, these directives must
31 follow an "overlay sock" line within an existing database definition.
32
33 extensions [ binddn | peername | ssf | connid ]*
34 Enables the sending of additional meta-attributes with each
35 request.
36 binddn: <bound DN>
37 peername: IP=<address>:<port>
38 ssf: <SSF value>
39 connid: <connection ID>
40
41 socketpath <pathname>
42 Gives the path to a Unix domain socket to which the commands
43 will be sent and from which replies are received.
44
45 When used as an overlay, these additional directives are
46 defined:
47
48 sockops [ bind | unbind | search | compare | modify | modrdn | add |
49 delete | extended ]*
50 Specify which request types to send to the external program. The
51 default is empty (no requests are sent).
52
53 sockresps [ result | search ]*
54 Specify which response types to send to the external program.
55 "result" sends just the results of an operation. "search" sends
56 all entries that the database returned for a search request. The
57 default is empty (no responses are sent).
58
59 sockdnpat <regexp>
60 Specify DN patterns for which the overlay will act. Only opera‐
61 tions on DNs matching the specified regular expression will be
62 processed. The default is empty (all DNs are processed).
63
64
66 The protocol is essentially the same as slapd-shell(5) with the addi‐
67 tion of a newline to terminate the command parameters. The following
68 commands are sent:
69 ADD
70 msgid: <message id>
71 <repeat { "suffix:" <database suffix DN> }>
72 <entry in LDIF format>
73 <blank line>
74
75 BIND
76 msgid: <message id>
77 <repeat { "suffix:" <database suffix DN> }>
78 dn: <DN>
79 method: <method number>
80 credlen: <length of <credentials>>
81 cred: <credentials>
82 <blank line>
83
84 COMPARE
85 msgid: <message id>
86 <repeat { "suffix:" <database suffix DN> }>
87 dn: <DN>
88 <attribute>: <value>
89 <blank line>
90
91 DELETE
92 msgid: <message id>
93 <repeat { "suffix:" <database suffix DN> }>
94 dn: <DN>
95 <blank line>
96
97 EXTENDED
98 msgid: <message id>
99 <repeat { "suffix:" <database suffix DN> }>
100 oid: <OID>
101 value: <base64-value>
102 <blank line>
103
104 MODIFY
105 msgid: <message id>
106 <repeat { "suffix:" <database suffix DN> }>
107 dn: <DN>
108 <repeat {
109 <"add"/"delete"/"replace">: <attribute>
110 <repeat { <attribute>: <value> }>
111 -
112 }>
113 <blank line>
114
115 MODRDN
116 msgid: <message id>
117 <repeat { "suffix:" <database suffix DN> }>
118 dn: <DN>
119 newrdn: <new RDN>
120 deleteoldrdn: <0 or 1>
121 <if new superior is specified: "newSuperior: <DN>">
122 <blank line>
123
124 SEARCH
125 msgid: <message id>
126 <repeat { "suffix:" <database suffix DN> }>
127 base: <base DN>
128 scope: <0-2, see ldap.h>
129 deref: <0-3, see ldap.h>
130 sizelimit: <size limit>
131 timelimit: <time limit>
132 filter: <filter>
133 attrsonly: <0 or 1>
134 attrs: <"all" or space-separated attribute list>
135 <blank line>
136
137 UNBIND
138 msgid: <message id>
139 <repeat { "suffix:" <database suffix DN> }>
140 <blank line>
141
142 The commands - except unbind - should output:
143 RESULT
144 code: <integer>
145 matched: <matched DN>
146 info: <text>
147 where only RESULT is mandatory, and then close the socket. The search
148 RESULT should be preceded by the entries in LDIF format, each entry
149 followed by a blank line. Lines starting with `#' or `DEBUG:' are
150 ignored.
151
152 When used as an overlay, the external program should return a CONTINUE
153 response if request processing should continue normally, or a regular
154 RESULT response if the external program wishes to bypass the underlying
155 database.
156
157 If the overlay is configured to send response messages to the external
158 program, they will appear as an extended RESULT message or as an ENTRY
159 message, defined below. The RESULT message is similar to the one above,
160 but also includes the msgid and any configured extensions:
161 RESULT
162 msgid: <message id>
163 code: <integer>
164 matched: <matched DN>
165 info: <text>
166 <blank line>
167
168 Typically both the msgid and the connid will be needed to match a
169 result message to a request. The ENTRY message has the form
170 ENTRY
171 msgid: <message id>
172 <entry in LDIF format>
173 <blank line>
174
175
177 The sock backend does not process extended operation results from an
178 external program.
179
180
182 The sock backend does not honor all ACL semantics as described in
183 slapd.access(5). In general, access to objects is checked by using a
184 dummy object that contains only the DN, so access rules that rely on
185 the contents of the object are not honored. In detail:
186
187 The add operation does not require write (=w) access to the children
188 pseudo-attribute of the parent entry.
189
190 The bind operation requires auth (=x) access to the entry pseudo-
191 attribute of the entry whose identity is being assessed; auth (=x)
192 access to the credentials is not checked, but rather delegated to the
193 underlying program.
194
195 The compare operation requires compare (=c) access to the entry pseudo-
196 attribute of the object whose value is being asserted; compare (=c)
197 access to the attribute whose value is being asserted is not checked.
198
199 The delete operation does not require write (=w) access to the children
200 pseudo-attribute of the parent entry.
201
202 The modify operation requires write (=w) access to the entry pseudo-
203 attribute; write (=w) access to the specific attributes that are modi‐
204 fied is not checked.
205
206 The modrdn operation does not require write (=w) access to the children
207 pseudo-attribute of the parent entry, nor to that of the new parent, if
208 different; write (=w) access to the distinguished values of the naming
209 attributes is not checked.
210
211 The search operation does not require search (=s) access to the entry
212 pseudo_attribute of the searchBase; search (=s) access to the
213 attributes and values used in the filter is not checked.
214
215 The extended operation does not require any access special rights. The
216 external program has to implement any sort of access control.
217
218
220 There is an example script in the slapd/back-sock/ directory in the
221 OpenLDAP source tree.
222
224 /etc/openldap/slapd.conf
225 default slapd configuration file
226
228 slapd.conf(5), slapd-config(5), slapd(8).
229
231 Brian Candler, with enhancements by Howard Chu
232
233
234
235OpenLDAP 2.4.50 2020/04/28 SLAPD-SOCK(5)