1FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
3
7 fence_ilo2 - Fence agent for HP iLO
8 fence_ilo2 - Fence agent for HP iLO2 (symlink)
10
13 fence_ilo is an I/O Fencing agent used for HP servers with the Inte‐
14 grated Light Out (iLO) PCI card.The agent opens an SSL connection to
15 the iLO card. Once the SSL connection is established, the agent is able
16 to communicate with the iLO card through an XML stream.
17 fence_ilo2 accepts options on the command line as well as from stdin.
19 Fenced sends parameters through stdin when it execs the agent.
20 fence_ilo2 can be run by itself with command line options. This is
21 useful for testing and for turning outlets on or off from scripts.
22 Vendor URL: http://www.hp.com
24
26 -o, --action=[action]
29 Fencing action (Default Value: reboot)
30 -a, --ip=[ip]
32 IP address or hostname of fencing device
33 -u, --ipport=[port]
35 TCP/UDP port to use for connection with device (Default Value:
36 443)
37 -t, --notls
39 Disable TLS negotiation and force SSL3.0. This should only be
40 used for devices that do not support TLS1.0 and up.
41 -p, --password=[password]
44 Login password or passphrase
45 -S, --password-script=[script]
47 Script to run to retrieve password
48 -n, --plug=[ip]
50 IP address or hostname of fencing device (together with --port-
51 as-ip)
52 -r, --ribcl-version=[version]
54 Force ribcl version to use
55 -z, --ssl
57 Use SSL connection with verifying certificate (Default Value: 1)
58 --ssl-insecure
61 Use SSL connection without verifying certificate
62 --ssl-secure
64 Use SSL connection with verifying certificate
65 --tls1.0
67 Disable TLS negotiation and force TLS1.0. This should only be
68 used for devices that do not support TLS1.1 and up.
69 -l, --username=[name]
71 Login name This parameter is always required.
72 -q, --quiet
74 Disable logging to stderr. Does not affect --verbose or --debug-
75 file or logging to syslog.
76 -v, --verbose
78 Verbose mode. Multiple -v flags can be stacked on the command
79 line (e.g., -vvv) to increase verbosity.
80 --verbose-level
82 Level of debugging detail in output. Defaults to the number of
83 --verbose flags specified on the command line, or to 1 if ver‐
84 bose=1 in a stonith device configuration (i.e., on stdin).
85 -D, --debug-file=[debugfile]
88 Write debug information to given file
89 -V, --version
91 Display version information and exit
92 -h, --help
94 Display help and exit
95 --delay=[seconds]
97 Wait X seconds before fencing is started (Default Value: 0)
98 --disable-timeout=[true/false]
101 Disable timeout (true/false) (default: true when run from Pace‐
102 maker 2.0+)
103 --login-timeout=[seconds]
105 Wait X seconds for cmd prompt after login (Default Value: 10)
106 --port-as-ip
109 Make "port/plug" to be an alias to IP address
110 --power-timeout=[seconds]
112 Test X seconds for status change after ON/OFF (Default Value:
113 20)
114 --power-wait=[seconds]
116 Wait X seconds after issuing ON/OFF (Default Value: 0)
117 --shell-timeout=[seconds]
119 Wait X seconds for cmd prompt after issuing command (Default
120 Value: 3)
121 --retry-on=[attempts]
123 Count of attempts to retry power on (Default Value: 3)
124 --gnutlscli-path=[path]
126 Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
127
130 on Power on machine.
133 off Power off machine.
135 reboot Reboot machine.
137 status This returns the status of the plug/virtual machine.
139 monitor
141 Check the health of fence device
142 metadata
144 Display the XML metadata describing this resource.
145 manpage
147 The operational behavior of this is not known.
148 validate-all
150 Validate if all required parameters are entered.
151
154 action Fencing action (Default Value: reboot)
157 ip IP address or hostname of fencing device Obsoletes: ipaddr
159 ipport TCP/UDP port to use for connection with device (Default Value:
162 443)
163 notls Disable TLS negotiation and force SSL3.0. This should only be
165 used for devices that do not support TLS1.0 and up.
166 password
169 Login password or passphrase Obsoletes: passwd
170 password_script
172 Script to run to retrieve password Obsoletes: passwd_script
173 plug IP address or hostname of fencing device (together with --port-
176 as-ip) Obsoletes: port
177 ribcl_version
179 Force ribcl version to use Obsoletes: ribcl
180 ssl Use SSL connection with verifying certificate (Default Value: 1)
182 ssl_insecure
185 Use SSL connection without verifying certificate
186 ssl_secure
188 Use SSL connection with verifying certificate
189 tls1.0 Disable TLS negotiation and force TLS1.0. This should only be
191 used for devices that do not support TLS1.1 and up.
192 username
194 Login name This parameter is always required. Obsoletes: login
195 quiet Disable logging to stderr. Does not affect --verbose or --debug-
198 file or logging to syslog.
199 verbose
201 Verbose mode. Multiple -v flags can be stacked on the command
202 line (e.g., -vvv) to increase verbosity.
203 verbose_level
205 Level of debugging detail in output. Defaults to the number of
206 --verbose flags specified on the command line, or to 1 if ver‐
207 bose=1 in a stonith device configuration (i.e., on stdin).
208 debug_file
211 Write debug information to given file Obsoletes: debug
212 version
214 Display version information and exit
215 help Display help and exit
217 delay Wait X seconds before fencing is started (Default Value: 0)
219 disable_timeout
222 Disable timeout (true/false) (default: true when run from Pace‐
223 maker 2.0+)
224 login_timeout
226 Wait X seconds for cmd prompt after login (Default Value: 10)
227 port_as_ip
230 Make "port/plug" to be an alias to IP address
231 power_timeout
233 Test X seconds for status change after ON/OFF (Default Value:
234 20)
235 power_wait
237 Wait X seconds after issuing ON/OFF (Default Value: 0)
238 shell_timeout
240 Wait X seconds for cmd prompt after issuing command (Default
241 Value: 3)
242 retry_on
244 Count of attempts to retry power on (Default Value: 3)
245 gnutlscli_path
247 Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
248fence_ilo2 (Fence Agent) 2009-10-20 FENCE_AGENT(8)