1YUM(8) DNF YUM(8)
2
6 yum - redirecting to DNF Command Reference
7
9 dnf [options] <command> [<args>...]
10
12 DNF is the next upcoming major version of YUM, a package manager for
13 RPM-based Linux distributions. It roughly maintains CLI compatibility
14 with YUM and defines a strict API for extensions and plugins.
15 Plugins can modify or extend features of DNF or provide additional CLI
17 commands on top of those mentioned below. If you know the name of such
18 a command (including commands mentioned below), you may find/install
19 the package which provides it using the appropriate virtual provide in
20 the form of dnf-command(<alias>), where <alias> is the name of the com‐
21 mand; e.g.``dnf install 'dnf-command(versionlock)'`` installs a ver‐
22 sionlock plugin. This approach also applies to specifying dependencies
23 of packages that require a particular DNF command.
24 Return values:
26 · 0 : Operation was successful.
28 · 1 : An error occurred, which was handled by dnf.
30 · 3 : An unknown unhandled error occurred during operation.
32 · 100: See check-update
34 · 200: There was a problem with acquiring or releasing of locks.
36 Available commands:
38 · alias
40 · autoremove
42 · check
44 · check-update
46 · clean
48 · deplist
50 · distro-sync
52 · downgrade
54 · group
56 · help
58 · history
60 · info
62 · install
64 · list
66 · makecache
68 · mark
70 · module
72 · provides
74 · reinstall
76 · remove
78 · repoinfo
80 · repolist
82 · repoquery
84 · repository-packages
86 · search
88 · shell
90 · swap
92 · updateinfo
94 · upgrade
96 · upgrade-minimal
98 Additional information:
100 · Options
102 · Specifying Packages
104 · Specifying Provides
106 · Specifying Groups
108 · Specifying Transactions
110 · Metadata Synchronization
112 · Configuration Files Replacement Policy
114 · Files
116 · See Also
118
120 -4 Resolve to IPv4 addresses only.
121 -6 Resolve to IPv6 addresses only.
123 --advisory=<advisory>, --advisories=<advisory>
125 Include packages corresponding to the advisory ID, Eg.
126 FEDORA-2201-123. Applicable for the install, repoquery, update‐
127 info and upgrade commands.
128 --allowerasing
130 Allow erasing of installed packages to resolve dependencies.
131 This option could be used as an alternative to the yum swap com‐
132 mand where packages to remove are not explicitly defined.
133 --assumeno
135 Automatically answer no for all questions.
136 -b, --best
138 Try the best available package versions in transactions. Specif‐
139 ically during dnf upgrade, which by default skips over updates
140 that can not be installed for dependency reasons, the switch
141 forces DNF to only consider the latest packages. When running
142 into packages with broken dependencies, DNF will fail giving a
143 reason why the latest version can not be installed.
144 --bugfix
146 Include packages that fix a bugfix issue. Applicable for the
147 install, repoquery, updateinfo and upgrade commands.
148 --bz=<bugzilla>, --bzs=<bugzilla>
150 Include packages that fix a Bugzilla ID, Eg. 123123. Applicable
151 for the install, repoquery, updateinfo and upgrade commands.
152 -C, --cacheonly
154 Run entirely from system cache, don't update the cache and use
155 it even in case it is expired.
156 DNF uses a separate cache for each user under which it executes.
158 The cache for the root user is called the system cache. This
159 switch allows a regular user read-only access to the system
160 cache, which usually is more fresh than the user's and thus he
161 does not have to wait for metadata sync.
162 --color=<color>
164 Control whether color is used in terminal output. Valid values
165 are always, never and auto (default).
166 --comment=<comment>
168 Add a comment to the transaction history.
169 -c <config file>, --config=<config file>
171 Configuration file location.
172 --cve=<cves>, --cves=<cves>
174 Include packages that fix a CVE (Common Vulnerabilities and
175 Exposures) ID (http://cve.mitre.org/about/), Eg. CVE-2201-0123.
176 Applicable for the install, repoquery, updateinfo, and upgrade
177 commands.
178 -d <debug level>, --debuglevel=<debug level>
180 Debugging output level. This is an integer value between 0 (no
181 additional information strings) and 10 (shows all debugging
182 information, even that not understandable to the user), default
183 is 2. Deprecated, use -v instead.
184 --debugsolver
186 Dump data aiding in dependency solver debugging into ./debug‐
187 data.
188 --disableexcludes=[all|main|<repoid>], --disableexcludep‐
190 kgs=[all|main|<repoid>]
191 Disable the configuration file excludes. Takes one of the following
192 three options:
193 · all, disables all configuration file excludes
195 · main, disables excludes defined in the [main] section
197 · repoid, disables excludes defined for the given repository
199 --disable, --set-disabled
201 Disable specified repositories (automatically saves). The option
202 has to be used together with the config-manager command
203 (dnf-plugins-core).
204 --disableplugin=<plugin names>
206 Disable the listed plugins specified by names or globs.
207 --disablerepo=<repoid>
209 Disable specific repositories by an id or a glob. This option is
210 mutually exclusive with --repo.
211 --downloaddir=<path>, --destdir=<path>
213 Redirect downloaded packages to provided directory. The option
214 has to be used together with the --downloadonly command line
215 option, with the download command (dnf-plugins-core) or with the
216 system-upgrade command (dnf-plugins-extras).
217 --downloadonly
219 Download the resolved package set without performing any rpm
220 transaction (install/upgrade/erase).
221 -e <error level>, --errorlevel=<error level>
223 Error output level. This is an integer value between 0 (no error
224 output) and 10 (shows all error messages), default is 3. Depre‐
225 cated, use -v instead.
226 --enable, --set-enabled
228 Enable specified repositories (automatically saves). The option
229 has to be used together with the config-manager command
230 (dnf-plugins-core).
231 --enableplugin=<plugin names>
233 Enable the listed plugins specified by names or globs.
234 --enablerepo=<repoid>
236 Enable additional repositories by an id or a glob.
237 --enhancement
239 Include enhancement relevant packages. Applicable for the
240 install, repoquery, updateinfo and upgrade commands.
241 -x <package-file-spec>, --exclude=<package-file-spec>
243 Exclude packages specified by <package-file-spec> from the oper‐
244 ation.
245 --excludepkgs=<package-file-spec>
247 Deprecated option. It was replaced by the --exclude option.
248 --forcearch=<arch>
250 Force the use of an architecture. Any architecture can be speci‐
251 fied. However, use of an architecture not supported natively by
252 your CPU will require emulation of some kind. This is usually
253 through QEMU. The behavior of --forcearch can be configured by
254 using the arch and ignorearch configuration options with values
255 <arch> and True respectively.
256 -h, --help, --help-cmd
258 Show the help.
259 --installroot=<path>
261 Specifies an alternative installroot, relative to where all
262 packages will be installed. Think of this like doing chroot
263 <root> dnf, except using --installroot allows dnf to work before
264 the chroot is created. It requires absolute path.
265 · cachedir, log files, releasever, and gpgkey are taken from or stored
267 in the installroot. Gpgkeys are imported into the installroot from a
268 path relative to the host which can be specified in the repository
269 section of configuration files.
270 · configuration file and reposdir are searched inside the installroot
272 first. If they are not present, they are taken from the host system.
273 Note: When a path is specified within a command line argument
274 (--config=<config file> in case of configuration file and
275 --setopt=reposdir=<reposdir> for reposdir) then this path is always
276 relative to the host with no exceptions.
277 · vars are taken from the host system or installroot according to
279 reposdir . When reposdir path is specified within a command line
280 argument, vars are taken from the installroot. When varsdir paths are
281 specified within a command line argument (--setopt=varsdir=<repos‐
282 dir>) then those path are always relative to the host with no excep‐
283 tions.
284 · The pluginpath and pluginconfpath are relative to the host.
286 Note: You may also want to use the command-line option --relea‐
287 sever=<release> when creating the installroot, otherwise the $relea‐
288 sever value is taken from the rpmdb within the installroot (and thus
289 it is empty at the time of creation and the transaction will fail).
290 If --releasever=/ is used, the releasever will be detected from the
291 host (/) system. The new installroot path at the time of creation
292 does not contain the repository, releasever and dnf.conf files.
293 On a modular system you may also want to use the --setopt=mod‐
295 ule_platform_id=<module_platform_name:stream> command-line option
296 when creating the installroot, otherwise the module_platform_id
297 value will be taken from the /etc/os-release file within the
298 installroot (and thus it will be empty at the time of creation, the
299 modular dependency could be unsatisfied and modules content could be
300 excluded).
301 Installroot examples:
303 dnf --installroot=<installroot> --releasever=<release> install sys‐
305 tem-release
306 Permanently sets the releasever of the system in the
307 <installroot> directory to <release>.
308 dnf --installroot=<installroot> --setopt=reposdir=<path> --config
310 /path/dnf.conf upgrade
311 Upgrades packages inside the installroot from a repository
312 described by --setopt using configuration from
313 /path/dnf.conf.
314 --newpackage
316 Include newpackage relevant packages. Applicable for the
317 install, repoquery, updateinfo and upgrade commands.
318 --noautoremove
320 Disable removal of dependencies that are no longer used. It sets
321 clean_requirements_on_remove configuration option to False.
322 --nobest
324 Set best option to False, so that transactions are not limited
325 to best candidates only.
326 --nodocs
328 Do not install documentation. Sets the rpm flag 'RPM‐
329 TRANS_FLAG_NODOCS'.
330 --nogpgcheck
332 Skip checking GPG signatures on packages (if RPM policy allows).
333 --noplugins
335 Disable all plugins.
336 --obsoletes
338 This option has an effect on an install/update, it enables dnf's
339 obsoletes processing logic. For more information see the obso‐
340 letes option.
341 This option also displays capabilities that the package obso‐
343 letes when used together with the repoquery command.
344 Configuration Option: obsoletes
346 -q, --quiet
348 In combination with a non-interactive command, shows just the
349 relevant content. Suppresses messages notifying about the cur‐
350 rent state or actions of DNF.
351 -R <minutes>, --randomwait=<minutes>
353 Maximum command wait time.
354 --refresh
356 Set metadata as expired before running the command.
357 --releasever=<release>
359 Configure DNF as if the distribution release was <release>. This
360 can affect cache paths, values in configuration files and mir‐
361 rorlist URLs.
362 --repofrompath <repo>,<path/url>
364 Specify a repository to add to the repositories for this query.
365 This option can be used multiple times.
366 · The repository label is specified by <repo>.
368 · The path or url to the repository is specified by <path/url>. It is
370 the same path as a baseurl and can be also enriched by the repo vari‐
371 ables.
372 · The configuration for the repository can be adjusted using -‐
374 -setopt=<repo>.<option>=<value>.
375 · If you want to view only packages from this repository, combine this
377 with the --repo=<repo> or --disablerepo="*" switches.
378 --repo=<repoid>, --repoid=<repoid>
380 Enable just specific repositories by an id or a glob. Can be
381 used multiple times with accumulative effect. It is basically a
382 shortcut for --disablerepo="*" --enablerepo=<repoid> and is
383 mutually exclusive with the --disablerepo option.
384 --rpmverbosity=<name>
386 RPM debug scriptlet output level. Sets the debug level to <name>
387 for RPM scriptlets. For available levels, see the rpmverbosity
388 configuration option.
389 --sec-severity=<severity>, --secseverity=<severity>
391 Includes packages that provide a fix for an issue of the speci‐
392 fied severity. Applicable for the install, repoquery, update‐
393 info and upgrade commands.
394 --security
396 Includes packages that provide a fix for a security issue.
397 Applicable for the upgrade command.
398 --setopt=<option>=<value>
400 Override a configuration option from the configuration file. To
401 override configuration options for repositories, use
402 repoid.option for the <option>. Values for configuration options
403 like excludepkgs, includepkgs, installonlypkgs and tsflags are
404 appended to the original value, they do not override it. How‐
405 ever, specifying an empty value (e.g. --setopt=tsflags=) will
406 clear the option.
407 --skip-broken
409 Resolve depsolve problems by removing packages that are causing
410 problems from the transaction. It is an alias for the strict
411 configuration option with value False. Additionally, with the
412 enable and disable module subcommands it allows one to perform
413 an action even in case of broken modular dependencies.
414 --showduplicates
416 Show duplicate packages in repositories. Applicable for the list
417 and search commands.
418 -v, --verbose
420 Verbose operation, show debug messages.
421 --version
423 Show DNF version and exit.
424 -y, --assumeyes
426 Automatically answer yes for all questions.
427 List options are comma-separated. Command-line options override respec‐
429 tive settings from configuration files.
430
432 For an explanation of <package-spec>, <package-file-spec> and <pack‐
433 age-name-spec> see Specifying Packages.
434 For an explanation of <provide-spec> see Specifying Provides.
436 For an explanation of <group-spec> see Specifying Groups.
438 For an explanation of <module-spec> see Specifying Modules.
440 For an explanation of <transaction-spec> see Specifying Transactions.
442 Alias Command
444 Command: alias
445 Allows the user to define and manage a list of aliases (in the form
448 <name=value>), which can be then used as dnf commands to abbreviate
449 longer command sequences. For examples on using the alias command, see
450 Alias Examples. For examples on the alias processing, see Alias Pro‐
451 cessing Examples.
452 To use an alias (name=value), the name must be placed as the first
454 "command" (e.g. the first argument that is not an option). It is then
455 replaced by its value and the resulting sequence is again searched for
456 aliases. The alias processing stops when the first found command is not
457 a name of any alias.
458 In case the processing would result in an infinite recursion, the orig‐
460 inal arguments are used instead.
461 Also, like in shell aliases, if the result starts with a \, the alias
463 processing will stop.
464 All aliases are defined in configuration files in the
466 /etc/dnf/aliases.d/ directory in the [aliases] section, and aliases
467 created by the alias command are written to the USER.conf file. In case
468 of conflicts, the USER.conf has the highest priority, and alphabetical
469 ordering is used for the rest of the configuration files.
470 Optionally, there is the enabled option in the [main] section default‐
472 ing to True. This can be set for each file separately in the respective
473 file, or globally for all aliases in the ALIASES.conf file.
474 dnf alias [options] [list] [<name>...]
476 List aliases with their final result. The [<alias>...] parameter
477 further limits the result to only those aliases matching it.
478 dnf alias [options] add <name=value>...
480 Create new aliases.
481 dnf alias [options] delete <name>...
483 Delete aliases.
484 Alias Examples
486 dnf alias list
487 Lists all defined aliases.
488 dnf alias add rm=remove
490 Adds a new command alias called rm which works the same as the
491 remove command.
492 dnf alias add upgrade="\upgrade --skip-broken --disableexcludes=all
494 --obsoletes"
495 Adds a new command alias called upgrade which works the same as
496 the upgrade command, with additional options. Note that the
497 original upgrade command is prefixed with a \ to prevent an
498 infinite loop in alias processing.
499 Alias Processing Examples
501 If there are defined aliases in=install and FORCE="--skip-broken --dis‐
502 ableexcludes=all":
503 · dnf FORCE in will be replaced with dnf --skip-broken --disableex‐
505 cludes=all install
506 · dnf in FORCE will be replaced with dnf install FORCE (which will
508 fail)
509 If there is defined alias in=install:
511 · dnf in will be replaced with dnf install
513 · dnf --repo updates in will be replaced with dnf --repo updates in
515 (which will fail)
516 Autoremove Command
518 Command: autoremove
519 Aliases for explicit NEVRA matching: autoremove-n, autoremove-na, autoremove-nevra
520 dnf [options] autoremove
523 Removes all "leaf" packages from the system that were originally
524 installed as dependencies of user-installed packages, but which are
525 no longer required by any such package.
526 Packages listed in installonlypkgs are never automatically removed by
528 this command.
529 dnf [options] autoremove <spec>...
531 This is an alias for the Remove Command command with clean_require‐
532 ments_on_remove set to True. It removes the specified packages from
533 the system along with any packages depending on the packages being
534 removed. Each <spec> can be either a <package-spec>, which specifies
535 a package directly, or a @<group-spec>, which specifies an (environ‐
536 ment) group which contains it. It also removes any dependencies that
537 are no longer needed.
538 There are also a few specific autoremove commands autoremove-n,
540 autoremove-na and autoremove-nevra that allow the specification of
541 an exact argument in the NEVRA (name-epoch:version-release.architec‐
542 ture) format.
543 This command by default does not force a sync of expired metadata. See
545 also Metadata Synchronization.
546 Check Command
548 Command: check
549 dnf [options] check [--dependencies] [--duplicates] [--obsoleted]
552 [--provides]
553 Checks the local packagedb and produces information on any problems
554 it finds. You can limit the checks to be performed by using the
555 --dependencies, --duplicates, --obsoleted and --provides options
556 (the default is to check everything).
557 Check-Update Command
559 Command: check-update
560 Aliases: check-upgrade
561 dnf [options] check-update [--changelogs] [<package-file-spec>...]
564 Non-interactively checks if updates of the specified packages are
565 available. If no <package-file-spec> is given, checks whether any
566 updates at all are available for your system. DNF exit code will be
567 100 when there are updates available and a list of the updates will
568 be printed, 0 if not and 1 if an error occurs. If --changelogs
569 option is specified, also changelog delta of packages about to be
570 updated is printed.
571 Please note that having a specific newer version available for an
573 installed package (and reported by check-update) does not imply that
574 subsequent dnf upgrade will install it. The difference is that dnf
575 upgrade has restrictions (like package dependencies being satisfied)
576 to take into account.
577 The output is affected by the autocheck_running_kernel configuration
579 option.
580 Clean Command
582 Command: clean
583 Performs cleanup of temporary files kept for repositories. This
586 includes any such data left behind from disabled or removed reposito‐
587 ries as well as for different distribution release versions.
588 dnf clean dbcache
590 Removes cache files generated from the repository metadata. This
591 forces DNF to regenerate the cache files the next time it is
592 run.
593 dnf clean expire-cache
595 Marks the repository metadata expired. DNF will re-validate the
596 cache for each repository the next time it is used.
597 dnf clean metadata
599 Removes repository metadata. Those are the files which DNF uses
600 to determine the remote availability of packages. Using this
601 option will make DNF download all the metadata the next time it
602 is run.
603 dnf clean packages
605 Removes any cached packages from the system.
606 dnf clean all
608 Does all of the above.
609 Deplist Command
611 dnf [options] deplist [<select-options>] [<query-options>] [<pack‐
612 age-spec>]
613 Deprecated alias for dnf repoquery --deplist.
614 Distro-Sync Command
616 Command: distro-sync
617 Aliases: dsync
618 Deprecated aliases: distrosync, distribution-synchronization
619 dnf distro-sync [<package-spec>...]
622 As necessary upgrades, downgrades or keeps selected installed
623 packages to match the latest version available from any enabled
624 repository. If no package is given, all installed packages are
625 considered.
626 See also Configuration Files Replacement Policy.
628 Downgrade Command
630 Command: downgrade
631 Aliases: dg
632 dnf [options] downgrade <package-spec>...
635 Downgrades the specified packages to the highest installable
636 package of all known lower versions if possible. When version is
637 given and is lower than version of installed package then it
638 downgrades to target version.
639 Group Command
641 Command: group
642 Aliases: grp
643 Deprecated aliases: groups, grouplist, groupinstall, groupupdate, groupremove, grouperase, groupinfo
644 Groups are virtual collections of packages. DNF keeps track of groups
647 that the user selected ("marked") installed and can manipulate the com‐
648 prising packages with simple commands.
649 dnf [options] group [summary] <group-spec>
651 Display overview of how many groups are installed and available.
652 With a spec, limit the output to the matching groups. summary is
653 the default groups subcommand.
654 dnf [options] group info <group-spec>
656 Display package lists of a group. Shows which packages are
657 installed or available from a repository when -v is used.
658 dnf [options] group install [--with-optional] <group-spec>...
660 Mark the specified group installed and install packages it con‐
661 tains. Also include optional packages of the group if
662 --with-optional is specified. All mandatory and Default packages
663 will be installed whenever possible. Conditional packages are
664 installed if they meet their requirement. If the group is
665 already (partially) installed, the command installs the missing
666 packages from the group. Depending on the value of obsoletes
667 configuration option group installation takes obsoletes into
668 account.
669 dnf [options] group list <group-spec>...
671 List all matching groups, either among installed or available
672 groups. If nothing is specified, list all known groups.
673 --installed and --available options narrow down the requested
674 list. Records are ordered by the display_order tag defined in
675 comps.xml file. Provides a list of all hidden groups by using
676 option --hidden. Provides group IDs when the -v or --ids
677 options are used.
678 dnf [options] group remove <group-spec>...
680 Mark the group removed and remove those packages in the group
681 from the system which do not belong to another installed group
682 and were not installed explicitly by the user.
683 dnf [options] group upgrade <group-spec>...
685 Upgrades the packages from the group and upgrades the group
686 itself. The latter comprises of installing packages that were
687 added to the group by the distribution and removing packages
688 that got removed from the group as far as they were not
689 installed explicitly by the user.
690 Groups can also be marked installed or removed without physically
692 manipulating any packages:
693 dnf [options] group mark install <group-spec>...
695 Mark the specified group installed. No packages will be
696 installed by this command, but the group is then considered
697 installed.
698 dnf [options] group mark remove <group-spec>...
700 Mark the specified group removed. No packages will be removed by
701 this command.
702 See also Configuration Files Replacement Policy.
704 Help Command
706 Command: help
707 dnf help [<command>]
710 Displays the help text for all commands. If given a command name
711 then only displays help for that particular command.
712 History Command
714 Command: history
715 Aliases: hist
716 The history command allows the user to view what has happened in past
719 transactions and act according to this information (assuming the his‐
720 tory_record configuration option is set).
721 dnf history [list] [--reverse] [<spec>...]
723 The default history action is listing information about given
724 transactions in a table. Each <spec> can be either a <transac‐
725 tion-spec>, which specifies a transaction directly, or a <trans‐
726 action-spec>..<transaction-spec>, which specifies a range of
727 transactions, or a <package-name-spec>, which specifies a trans‐
728 action by a package which it manipulated. When no transaction is
729 specified, list all known transactions.
730 --reverse
732 The order of history list output is printed in reverse
733 order.
734 dnf history info [<spec>...]
736 Describe the given transactions. The meaning of <spec> is the
737 same as in the History List Command. When no transaction is
738 specified, describe what happened during the latest transaction.
739 dnf history redo <transaction-spec>|<package-file-spec>
741 Repeat the specified transaction. Uses the last transaction
742 (with the highest ID) if more than one transaction for given
743 <package-file-spec> is found. If it is not possible to redo some
744 operations due to the current state of RPMDB, it will not redo
745 the transaction.
746 dnf history replay [--ignore-installed] [--ignore-extras]
748 [--skip-unavailable] <filename>
749 Replay a transaction stored in file <filename> by History Store
750 Command. The replay will perform the exact same operations on
751 the packages as in the original transaction and will return with
752 an error if case of any differences in installed packages or
753 their versions. See also the Transaction JSON Format specifica‐
754 tion of the file format.
755 --ignore-installed
757 Don't check for the installed packages being in the same
758 state as those recorded in the transaction. E.g. in case
759 there is an upgrade foo-1.0 -> foo-2.0 stored in the
760 transaction, but there is foo-1.1 installed on the target
761 system.
762 --ignore-extras
764 Don't check for extra packages pulled into the transac‐
765 tion on the target system. E.g. the target system may not
766 have some dependency, which was installed on the source
767 system. The replay errors out on this by default, as the
768 transaction would not be the same.
769 --skip-unavailable
771 In case some packages stored in the transaction are not
772 available on the target system, skip them instead of
773 erroring out.
774 dnf history rollback <transaction-spec>|<package-file-spec>
776 Undo all transactions performed after the specified transaction.
777 Uses the last transaction (with the highest ID) if more than one
778 transaction for given <package-file-spec> is found. If it is
779 not possible to undo some transactions due to the current state
780 of RPMDB, it will not undo any transaction.
781 dnf history store [--output <output-file>] <transaction-spec>
783 Store a transaction specified by <transaction-spec>. The trans‐
784 action can later be replayed by the History Replay Command.
785 Warning: The stored transaction format is considered unstable
787 and may change at any time. It will work if the same version of
788 dnf is used to store and replay (or between versions as long as
789 it stays the same).
790 -o <output-file>, --output=<output-file> Store the serialized
792 transaction into <output-file. Default is transaction.json.
793 dnf history undo <transaction-spec>|<package-file-spec>
795 Perform the opposite operation to all operations performed in
796 the specified transaction. Uses the last transaction (with the
797 highest ID) if more than one transaction for given <pack‐
798 age-file-spec> is found. If it is not possible to undo some
799 operations due to the current state of RPMDB, it will not undo
800 the transaction.
801 dnf history userinstalled
803 Show all installonly packages, packages installed outside of DNF
804 and packages not installed as dependency. I.e. it lists packages
805 that will stay on the system when Autoremove Command or Remove
806 Command along with clean_requirements_on_remove configuration
807 option set to True is executed. Note the same results can be
808 accomplished with dnf repoquery --userinstalled, and the repo‐
809 query command is more powerful in formatting of the output.
810 This command by default does not force a sync of expired metadata,
812 except for the redo, rollback, and undo subcommands. See also Metadata
813 Synchronization and Configuration Files Replacement Policy.
814 Info Command
816 Command: info
817 dnf [options] info [<package-file-spec>...]
820 Lists description and summary information about installed and
821 available packages.
822 The info command limits the displayed packages the same way as the list
824 command.
825 This command by default does not force a sync of expired metadata. See
827 also Metadata Synchronization.
828 Install Command
830 Command: install
831 Aliases: in
832 Aliases for explicit NEVRA matching: install-n, install-na, install-nevra
833 Deprecated aliases: localinstall
834 dnf [options] install <spec>...
837 Makes sure that the given packages and their dependencies are
838 installed on the system. Each <spec> can be either a
839 <package-spec>, or a @<module-spec>, or a @<group-spec>. See
840 Install Examples. If a given package or provide cannot be (and
841 is not already) installed, the exit code will be non-zero. If
842 the <spec> matches both a @<module-spec> and a @<group-spec>,
843 only the module is installed.
844 When <package-spec> to specify the exact version of the package
846 is given, DNF will install the desired version, no matter which
847 version of the package is already installed. The former version
848 of the package will be removed in the case of non-installonly
849 package.
850 On the other hand if <package-spec> specifies only a name, DNF
852 also takes into account packages obsoleting it when picking
853 which package to install. This behaviour is specific to the
854 install command. Note that this can lead to seemingly unex‐
855 pected results if a package has multiple versions and some older
856 version is being obsoleted. It creates a split in the
857 upgrade-path and both ways are considered correct, the resulting
858 package is picked simply by lexicographical order.
859 There are also a few specific install commands install-n,
861 install-na and install-nevra that allow the specification of an
862 exact argument in the NEVRA format.
863 See also Configuration Files Replacement Policy.
865 Install Examples
867 dnf install tito
868 Install the tito package (tito is the package name).
869 dnf install ~/Downloads/tito-0.6.2-1.fc22.noarch.rpm
871 Install a local rpm file tito-0.6.2-1.fc22.noarch.rpm from the
872 ~/Downloads/ directory.
873 dnf install tito-0.5.6-1.fc22
875 Install the package with a specific version. If the package is
876 already installed it will automatically try to downgrade or
877 upgrade to the specific version.
878 dnf --best install tito
880 Install the latest available version of the package. If the
881 package is already installed it will try to automatically
882 upgrade to the latest version. If the latest version of the
883 package cannot be installed, the installation will fail.
884 dnf install vim
886 DNF will automatically recognize that vim is not a package name,
887 but will look up and install a package that provides vim with
888 all the required dependencies. Note: Package name match has
889 precedence over package provides match.
890 dnf install https://kojipkgs.fedoraproject.org//pack‐
892 ages/tito/0.6.0/1.fc22/noarch/tito-0.6.0-1.fc22.noarch.rpm
893 Install a package directly from a URL.
894 dnf install '@docker'
896 Install all default profiles of module 'docker' and their RPMs.
897 Module streams get enabled accordingly.
898 dnf install '@Web Server'
900 Install the 'Web Server' environmental group.
901 dnf install /usr/bin/rpmsign
903 Install a package that provides the /usr/bin/rpmsign file.
904 dnf -y install tito --setopt=install_weak_deps=False
906 Install the tito package (tito is the package name) without weak
907 deps. Weak deps are not required for core functionality of the
908 package, but they enhance the original package (like extended
909 documentation, plugins, additional functions, etc.).
910 dnf install --advisory=FEDORA-2018-b7b99fe852 \*
912 Install all packages that belong to the "FEDORA-2018-b7b99fe852"
913 advisory.
914 List Command
916 Command: list
917 Aliases: ls
918 Prints lists of packages depending on the packages' relation to the
921 system. A package is installed if it is present in the RPMDB, and it is
922 available if it is not installed but is present in a repository that
923 DNF knows about.
924 The list command also limits the displayed packages according to spe‐
926 cific criteria, e.g. to only those that update an installed package
927 (respecting the repository priority). The exclude option in the config‐
928 uration file can influence the result, but if the --disableexcludes
929 command line option is used, it ensures that all installed packages
930 will be listed.
931 dnf [options] list [--all] [<package-file-spec>...]
933 Lists all packages, present in the RPMDB, in a repository or
934 both.
935 dnf [options] list --installed [<package-file-spec>...]
937 Lists installed packages.
938 dnf [options] list --available [<package-file-spec>...]
940 Lists available packages.
941 dnf [options] list --extras [<package-file-spec>...]
943 Lists extras, that is packages installed on the system that are
944 not available in any known repository.
945 dnf [options] list --obsoletes [<package-file-spec>...]
947 List packages installed on the system that are obsoleted by
948 packages in any known repository.
949 dnf [options] list --recent [<package-file-spec>...]
951 List packages recently added into the repositories.
952 dnf [options] list --upgrades [<package-file-spec>...]
954 List upgrades available for the installed packages.
955 dnf [options] list --autoremove
957 List packages which will be removed by the dnf autoremove com‐
958 mand.
959 This command by default does not force a sync of expired metadata. See
961 also Metadata Synchronization.
962 Makecache Command
964 Command: makecache
965 Aliases: mc
966 dnf [options] makecache
969 Downloads and caches metadata for all known repos. Tries to
970 avoid downloading whenever possible (e.g. when the local meta‐
971 data hasn't expired yet or when the metadata timestamp hasn't
972 changed).
973 dnf [options] makecache --timer
975 Like plain makecache, but instructs DNF to be more
976 resource-aware, meaning it will not do anything if running on
977 battery power and will terminate immediately if it's too soon
978 after the last successful makecache run (see dnf.conf(5), meta‐
979 data_timer_sync).
980 Mark Command
982 Command: mark
983 dnf mark install <package-spec>...
986 Marks the specified packages as installed by user. This can be
987 useful if any package was installed as a dependency and is
988 desired to stay on the system when Autoremove Command or Remove
989 Command along with clean_requirements_on_remove configuration
990 option set to True is executed.
991 dnf mark remove <package-spec>...
993 Unmarks the specified packages as installed by user. Whenever
994 you as a user don't need a specific package you can mark it for
995 removal. The package stays installed on the system but will be
996 removed when Autoremove Command or Remove Command along with
997 clean_requirements_on_remove configuration option set to True is
998 executed. You should use this operation instead of Remove Com‐
999 mand if you're not sure whether the package is a requirement of
1000 other user installed packages on the system.
1001 dnf mark group <package-spec>...
1003 Marks the specified packages as installed by group. This can be
1004 useful if any package was installed as a dependency or a user
1005 and is desired to be protected and handled as a group member
1006 like during group remove.
1007 Module Command
1009 Command: module
1010 Modularity overview is available at man page dnf.modularity(7). Module
1013 subcommands take <module-spec>... arguments that specify modules or
1014 profiles.
1015 dnf [options] module install <module-spec>...
1017 Install module profiles, including their packages. In case no
1018 profile was provided, all default profiles get installed. Mod‐
1019 ule streams get enabled accordingly.
1020 This command cannot be used for switching module streams. Use
1022 the dnf module switch-to command for that.
1023 dnf [options] module update <module-spec>...
1025 Update packages associated with an active module stream, option‐
1026 ally restricted to a profile. If the profile_name is provided,
1027 only the packages referenced by that profile will be updated.
1028 dnf [options] module switch-to <module-spec>...
1030 Switch to or enable a module stream, change versions of
1031 installed packages to versions provided by the new stream, and
1032 remove packages from the old stream that are no longer avail‐
1033 able. It also updates installed profiles if they are available
1034 for the new stream. When a profile was provided, it installs
1035 that profile and does not update any already installed profiles.
1036 This command can be used as a stronger version of the dnf module
1038 enable command, which not only enables modules, but also does a
1039 distrosync to all modular packages in the enabled modules.
1040 It can also be used as a stronger version of the dnf module
1042 install command, but it requires to specify profiles that are
1043 supposed to be installed, because switch-to command does not use
1044 default profiles. The switch-to command doesn't only install
1045 profiles, it also makes a distrosync to all modular packages in
1046 the installed module.
1047 dnf [options] module remove <module-spec>...
1049 Remove installed module profiles, including packages that were
1050 installed with the dnf module install command. Will not remove
1051 packages required by other installed module profiles or by other
1052 user-installed packages. In case no profile was provided, all
1053 installed profiles get removed.
1054 dnf [options] module remove --all <module-spec>...
1056 Remove installed module profiles, including packages that were
1057 installed with the dnf module install command. With --all
1058 option it additionally removes all packages whose names are pro‐
1059 vided by specified modules. Packages required by other installed
1060 module profiles and packages whose names are also provided by
1061 any other module are not removed.
1062 dnf [options] module enable <module-spec>...
1064 Enable a module stream and make the stream RPMs available in the
1065 package set.
1066 Modular dependencies are resolved, dependencies checked and also
1068 recursively enabled. In case of modular dependency issue the
1069 operation will be rejected. To perform the action anyway please
1070 use --skip-broken option.
1071 This command cannot be used for switching module streams. Use
1073 the dnf module switch-to command for that.
1074 dnf [options] module disable <module-name>...
1076 Disable a module. All related module streams will become
1077 unavailable. Consequently, all installed profiles will be
1078 removed and the module RPMs will become unavailable in the pack‐
1079 age set. In case of modular dependency issue the operation will
1080 be rejected. To perform the action anyway please use -‐
1081 -skip-broken option.
1082 dnf [options] module reset <module-name>...
1084 Reset module state so it's no longer enabled or disabled. Con‐
1085 sequently, all installed profiles will be removed and only RPMs
1086 from the default stream will be available in the package set.
1087 dnf [options] module provides <package-name-spec>...
1089 Lists all modular packages matching <package-name-spec> from all
1090 modules (including disabled), along with the modules and streams
1091 they belong to.
1092 dnf [options] module list [--all] [module_name...]
1094 Lists all module streams, their profiles and states (enabled,
1095 disabled, default).
1096 dnf [options] module list --enabled [module_name...]
1098 Lists module streams that are enabled.
1099 dnf [options] module list --disabled [module_name...]
1101 Lists module streams that are disabled.
1102 dnf [options] module list --installed [module_name...]
1104 List module streams with installed profiles.
1105 dnf [options] module info <module-spec>...
1107 Print detailed information about given module stream.
1108 dnf [options] module info --profile <module-spec>...
1110 Print detailed information about given module profiles.
1111 dnf [options] module repoquery <module-spec>...
1113 List all available packages belonging to selected modules.
1114 dnf [options] module repoquery --available <module-spec>...
1116 List all available packages belonging to selected modules.
1117 dnf [options] module repoquery --installed <module-spec>...
1119 List all installed packages with same name like packages belong‐
1120 ing to selected modules.
1121 Provides Command
1123 Command: provides
1124 Aliases: prov, whatprovides
1125 dnf [options] provides <provide-spec>
1128 Finds the packages providing the given <provide-spec>. This is
1129 useful when one knows a filename and wants to find what package
1130 (installed or not) provides this file. The <provide-spec> is
1131 gradually looked for at following locations:
1132 1. The <provide-spec> is matched with all file provides of any
1134 available package:
1135 $ dnf provides /usr/bin/gzip
1137 gzip-1.9-9.fc29.x86_64 : The GNU data compression program
1138 Matched from:
1139 Filename : /usr/bin/gzip
1140 2. Then all provides of all available packages are searched:
1142 $ dnf provides "gzip(x86-64)"
1144 gzip-1.9-9.fc29.x86_64 : The GNU data compression program
1145 Matched from:
1146 Provide : gzip(x86-64) = 1.9-9.fc29
1147 3. DNF assumes that the <provide-spec> is a system command,
1149 prepends it with /usr/bin/, /usr/sbin/ prefixes (one at a
1150 time) and does the file provides search again. For legacy
1151 reasons (packages that didn't do UsrMove) also /bin and /sbin
1152 prefixes are being searched:
1153 $ dnf provides zless
1155 gzip-1.9-9.fc29.x86_64 : The GNU data compression program
1156 Matched from:
1157 Filename : /usr/bin/zless
1158 4. If this last step also fails, DNF returns "Error: No Matches
1160 found".
1161 This command by default does not force a sync of expired meta‐
1163 data. See also Metadata Synchronization.
1164 Reinstall Command
1166 Command: reinstall
1167 Aliases: rei
1168 dnf [options] reinstall <package-spec>...
1171 Installs the specified packages, fails if some of the packages
1172 are either not installed or not available (i.e. there is no
1173 repository where to download the same RPM).
1174 Remove Command
1176 Command: remove
1177 Aliases: rm
1178 Aliases for explicit NEVRA matching: remove-n, remove-na, remove-nevra
1179 Deprecated aliases: erase, erase-n, erase-na, erase-nevra
1180 dnf [options] remove <package-spec>...
1183 Removes the specified packages from the system along with any
1184 packages depending on the packages being removed. Each <spec>
1185 can be either a <package-spec>, which specifies a package
1186 directly, or a @<group-spec>, which specifies an (environment)
1187 group which contains it. If clean_requirements_on_remove is
1188 enabled (the default), also removes any dependencies that are no
1189 longer needed.
1190 dnf [options] remove --duplicates
1192 Removes older versions of duplicate packages. To ensure the
1193 integrity of the system it reinstalls the newest package. In
1194 some cases the command cannot resolve conflicts. In such cases
1195 the dnf shell command with remove --duplicates and upgrade
1196 dnf-shell sub-commands could help.
1197 dnf [options] remove --oldinstallonly
1199 Removes old installonly packages, keeping only latest versions
1200 and version of running kernel.
1201 There are also a few specific remove commands remove-n,
1203 remove-na and remove-nevra that allow the specification of an
1204 exact argument in the NEVRA format.
1205 Remove Examples
1207 dnf remove acpi tito
1208 Remove the acpi and tito packages.
1209 dnf remove $(dnf repoquery --extras --exclude=tito,acpi)
1211 Remove packages not present in any repository, but don't remove
1212 the tito and acpi packages (they still might be removed if they
1213 depend on some of the removed packages).
1214 Remove older versions of duplicated packages (an equivalent of yum's
1216 package-cleanup --cleandups):
1217 dnf remove --duplicates
1219 Repoinfo Command
1221 Command: repoinfo
1222 An alias for the repolist command that provides more detailed infor‐
1224 mation like dnf repolist -v.
1225 Repolist Command
1227 Command: repolist
1228 dnf [options] repolist [--enabled|--disabled|--all]
1231 Depending on the exact command lists enabled, disabled or all
1232 known repositories. Lists all enabled repositories by default.
1233 Provides more detailed information when -v option is used.
1234 This command by default does not force a sync of expired metadata. See
1236 also Metadata Synchronization.
1237 Repoquery Command
1239 Command: repoquery
1240 Aliases: rq
1241 Aliases for explicit NEVRA matching: repoquery-n, repoquery-na, repoquery-nevra
1242 dnf [options] repoquery [<select-options>] [<query-options>] [<pack‐
1245 age-file-spec>]
1246 Searches available DNF repositories for selected packages and
1247 displays the requested information about them. It is an equiva‐
1248 lent of rpm -q for remote repositories.
1249 dnf [options] repoquery --querytags
1251 Provides the list of tags recognized by the --queryformat repo‐
1252 query option.
1253 There are also a few specific repoquery commands repoquery-n,
1255 repoquery-na and repoquery-nevra that allow the specification of
1256 an exact argument in the NEVRA format (does not affect arguments
1257 of options like --whatprovides <arg>, ...).
1258 Select Options
1260 Together with <package-file-spec>, control what packages are displayed
1261 in the output. If <package-file-spec> is given, limits the resulting
1262 set of packages to those matching the specification. All packages are
1263 considered if no <package-file-spec> is specified.
1264 <package-file-spec>
1266 Package specification in the NEVRA format (name[-[epoch:]ver‐
1267 sion[-release]][.arch]), a package provide or a file provide.
1268 See Specifying Packages.
1269 -a, --all
1271 Query all packages (for rpmquery compatibility, also a shorthand
1272 for repoquery '*' or repoquery without arguments).
1273 --arch <arch>[,<arch>...], --archlist <arch>[,<arch>...]
1275 Limit the resulting set only to packages of selected architec‐
1276 tures (default is all architectures). In some cases the result
1277 is affected by the basearch of the running system, therefore to
1278 run repoquery for an arch incompatible with your system use the
1279 --forcearch=<arch> option to change the basearch.
1280 --duplicates
1282 Limit the resulting set to installed duplicate packages (i.e.
1283 more package versions for the same name and architecture).
1284 Installonly packages are excluded from this set.
1285 --unneeded
1287 Limit the resulting set to leaves packages that were installed
1288 as dependencies so they are no longer needed. This switch lists
1289 packages that are going to be removed after executing the dnf
1290 autoremove command.
1291 --available
1293 Limit the resulting set to available packages only (set by
1294 default).
1295 --disable-modular-filtering
1297 Disables filtering of modular packages, so that packages of
1298 inactive module streams are included in the result.
1299 --extras
1301 Limit the resulting set to packages that are not present in any
1302 of the available repositories.
1303 -f <file>, --file <file>
1305 Limit the resulting set only to the package that owns <file>.
1306 --installed
1308 Limit the resulting set to installed packages only. The exclude
1309 option in the configuration file might influence the result, but
1310 if the command line option --disableexcludes is used, it
1311 ensures that all installed packages will be listed.
1312 --installonly
1314 Limit the resulting set to installed installonly packages.
1315 --latest-limit <number>
1317 Limit the resulting set to <number> of latest packages for every
1318 package name and architecture. If <number> is negative, skip
1319 <number> of latest packages. For a negative <number> use the
1320 --latest-limit=<number> syntax.
1321 --recent
1323 Limit the resulting set to packages that were recently edited.
1324 --repo <repoid>
1326 Limit the resulting set only to packages from a repository iden‐
1327 tified by <repoid>. Can be used multiple times with accumula‐
1328 tive effect.
1329 --unsatisfied
1331 Report unsatisfied dependencies among installed packages (i.e.
1332 missing requires and and existing conflicts).
1333 --upgrades
1335 Limit the resulting set to packages that provide an upgrade for
1336 some already installed package.
1337 --userinstalled
1339 Limit the resulting set to packages installed by the user. The
1340 exclude option in the configuration file might influence the
1341 result, but if the command line option --disableexcludes is
1342 used, it ensures that all installed packages will be listed.
1343 --whatdepends <capability>[,<capability>...]
1345 Limit the resulting set only to packages that require, enhance,
1346 recommend, suggest or supplement any of <capabilities>.
1347 --whatconflicts <capability>[,<capability>...]
1349 Limit the resulting set only to packages that conflict with any
1350 of <capabilities>.
1351 --whatenhances <capability>[,<capability>...]
1353 Limit the resulting set only to packages that enhance any of
1354 <capabilities>. Use --whatdepends if you want to list all
1355 depending packages.
1356 --whatobsoletes <capability>[,<capability>...]
1358 Limit the resulting set only to packages that obsolete any of
1359 <capabilities>.
1360 --whatprovides <capability>[,<capability>...]
1362 Limit the resulting set only to packages that provide any of
1363 <capabilities>.
1364 --whatrecommends <capability>[,<capability>...]
1366 Limit the resulting set only to packages that recommend any of
1367 <capabilities>. Use --whatdepends if you want to list all
1368 depending packages.
1369 --whatrequires <capability>[,<capability>...]
1371 Limit the resulting set only to packages that require any of
1372 <capabilities>. Use --whatdepends if you want to list all
1373 depending packages.
1374 --whatsuggests <capability>[,<capability>...]
1376 Limit the resulting set only to packages that suggest any of
1377 <capabilities>. Use --whatdepends if you want to list all
1378 depending packages.
1379 --whatsupplements <capability>[,<capability>...]
1381 Limit the resulting set only to packages that supplement any of
1382 <capabilities>. Use --whatdepends if you want to list all
1383 depending packages.
1384 --alldeps
1386 This option is stackable with --whatrequires or --whatdepends
1387 only. Additionally it adds all packages requiring the package
1388 features to the result set (used as default).
1389 --exactdeps
1391 This option is stackable with --whatrequires or --whatdepends
1392 only. Limit the resulting set only to packages that require
1393 <capability> specified by --whatrequires.
1394 --srpm Operate on the corresponding source RPM.
1396 Query Options
1398 Set what information is displayed about each package.
1399 The following are mutually exclusive, i.e. at most one can be speci‐
1401 fied. If no query option is given, matching packages are displayed in
1402 the standard NEVRA notation.
1403 -i, --info
1405 Show detailed information about the package.
1406 -l, --list
1408 Show the list of files in the package.
1409 -s, --source
1411 Show the package source RPM name.
1412 --changelogs
1414 Print the package changelogs.
1415 --conflicts
1417 Display capabilities that the package conflicts with. Same as
1418 --qf "%{conflicts}.
1419 --depends
1421 Display capabilities that the package depends on, enhances, rec‐
1422 ommends, suggests or supplements.
1423 --enhances
1425 Display capabilities enhanced by the package. Same as --qf
1426 "%{enhances}"".
1427 --location
1429 Show a location where the package could be downloaded from.
1430 --obsoletes
1432 Display capabilities that the package obsoletes. Same as --qf
1433 "%{obsoletes}".
1434 --provides
1436 Display capabilities provided by the package. Same as --qf
1437 "%{provides}".
1438 --recommends
1440 Display capabilities recommended by the package. Same as --qf
1441 "%{recommends}".
1442 --requires
1444 Display capabilities that the package depends on. Same as --qf
1445 "%{requires}".
1446 --requires-pre
1448 Display capabilities that the package depends on for running a
1449 %pre script. Same as --qf "%{requires-pre}".
1450 --suggests
1452 Display capabilities suggested by the package. Same as --qf
1453 "%{suggests}".
1454 --supplements
1456 Display capabilities supplemented by the package. Same as --qf
1457 "%{supplements}".
1458 --tree Display a recursive tree of packages with capabilities specified
1460 by one of the following supplementary options: --whatrequires,
1461 --requires, --conflicts, --enhances, --suggests, --provides,
1462 --supplements, --recommends.
1463 --deplist
1465 Produce a list of all direct dependencies and what packages pro‐
1466 vide those dependencies for the given packages. The result only
1467 shows the newest providers (which can be changed by using --ver‐
1468 bose).
1469 --nvr Show found packages in the name-version-release format. Same as
1471 --qf "%{name}-%{version}-%{release}".
1472 --nevra
1474 Show found packages in the name-epoch:version-release.architec‐
1475 ture format. Same as --qf "%{name}-%{epoch}:%{ver‐
1476 sion}-%{release}.%{arch}" (default).
1477 --envra
1479 Show found packages in the epoch:name-version-release.architec‐
1480 ture format. Same as --qf "%{epoch}:%{name}-%{ver‐
1481 sion}-%{release}.%{arch}"
1482 --qf <format>, --queryformat <format>
1484 Custom display format. <format> is the string to output for each
1485 matched package. Every occurrence of %{<tag>} within is replaced
1486 by the corresponding attribute of the package. The list of rec‐
1487 ognized tags can be displayed by running dnf repoquery --query‐
1488 tags.
1489 --recursive
1491 Query packages recursively. Has to be used with --whatrequires
1492 <REQ> (optionally with --alldeps, but not with --exactdeps) or
1493 with --requires <REQ> --resolve.
1494 --resolve
1496 resolve capabilities to originating package(s).
1497 Examples
1499 Display NEVRAs of all available packages matching light*:
1500 dnf repoquery 'light*'
1502 Display NEVRAs of all available packages matching name light* and
1504 architecture noarch (accepts only arguments in the "<name>.<arch>" for‐
1505 mat):
1506 dnf repoquery-na 'light*.noarch'
1508 Display requires of all lighttpd packages:
1510 dnf repoquery --requires lighttpd
1512 Display packages providing the requires of python packages:
1514 dnf repoquery --requires python --resolve
1516 Display source rpm of ligttpd package:
1518 dnf repoquery --source lighttpd
1520 Display package name that owns the given file:
1522 dnf repoquery --file /etc/lighttpd/lighttpd.conf
1524 Display name, architecture and the containing repository of all
1526 lighttpd packages:
1527 dnf repoquery --queryformat '%{name}.%{arch} : %{reponame}' lighttpd
1529 Display all available packages providing "webserver":
1531 dnf repoquery --whatprovides webserver
1533 Display all available packages providing "webserver" but only for
1535 "i686" architecture:
1536 dnf repoquery --whatprovides webserver --arch i686
1538 Display duplicate packages:
1540 dnf repoquery --duplicates
1542 Display source packages that require a <provide> for a build:
1544 dnf repoquery --disablerepo="*" --enablerepo="*-source" --arch=src --whatrequires <provide>
1546 Repository-Packages Command
1548 Command: repository-packages
1549 Deprecated aliases: repo-pkgs, repo-packages, repository-pkgs
1550 The repository-packages command allows the user to run commands on top
1553 of all packages in the repository named <repoid>. However, any depen‐
1554 dency resolution takes into account packages from all enabled reposito‐
1555 ries. The <package-file-spec> and <package-spec> specifications further
1556 limit the candidates to only those packages matching at least one of
1557 them.
1558 The info subcommand lists description and summary information about
1560 packages depending on the packages' relation to the repository. The
1561 list subcommand just prints lists of those packages.
1562 dnf [options] repository-packages <repoid> check-update [<pack‐
1564 age-file-spec>...]
1565 Non-interactively checks if updates of the specified packages in
1566 the repository are available. DNF exit code will be 100 when
1567 there are updates available and a list of the updates will be
1568 printed.
1569 dnf [options] repository-packages <repoid> info [--all] [<pack‐
1571 age-file-spec>...]
1572 List all related packages.
1573 dnf [options] repository-packages <repoid> info --installed [<pack‐
1575 age-file-spec>...]
1576 List packages installed from the repository.
1577 dnf [options] repository-packages <repoid> info --available [<pack‐
1579 age-file-spec>...]
1580 List packages available in the repository but not currently
1581 installed on the system.
1582 dnf [options] repository-packages <repoid> info --extras [<pack‐
1584 age-file-specs>...]
1585 List packages installed from the repository that are not avail‐
1586 able in any repository.
1587 dnf [options] repository-packages <repoid> info --obsoletes [<pack‐
1589 age-file-spec>...]
1590 List packages in the repository that obsolete packages installed
1591 on the system.
1592 dnf [options] repository-packages <repoid> info --recent [<pack‐
1594 age-file-spec>...]
1595 List packages recently added into the repository.
1596 dnf [options] repository-packages <repoid> info --upgrades [<pack‐
1598 age-file-spec>...]
1599 List packages in the repository that upgrade packages installed
1600 on the system.
1601 dnf [options] repository-packages <repoid> install [<package-spec>...]
1603 Install all packages in the repository.
1604 dnf [options] repository-packages <repoid> list [--all] [<pack‐
1606 age-file-spec>...]
1607 List all related packages.
1608 dnf [options] repository-packages <repoid> list --installed [<pack‐
1610 age-file-spec>...]
1611 List packages installed from the repository.
1612 dnf [options] repository-packages <repoid> list --available [<pack‐
1614 age-file-spec>...]
1615 List packages available in the repository but not currently
1616 installed on the system.
1617 dnf [options] repository-packages <repoid> list --extras [<pack‐
1619 age-file-spec>...]
1620 List packages installed from the repository that are not avail‐
1621 able in any repository.
1622 dnf [options] repository-packages <repoid> list --obsoletes [<pack‐
1624 age-file-spec>...]
1625 List packages in the repository that obsolete packages installed
1626 on the system.
1627 dnf [options] repository-packages <repoid> list --recent [<pack‐
1629 age-file-spec>...]
1630 List packages recently added into the repository.
1631 dnf [options] repository-packages <repoid> list --upgrades [<pack‐
1633 age-file-spec>...]
1634 List packages in the repository that upgrade packages installed
1635 on the system.
1636 dnf [options] repository-packages <repoid> move-to [<package-spec>...]
1638 Reinstall all those packages that are available in the reposi‐
1639 tory.
1640 dnf [options] repository-packages <repoid> reinstall [<pack‐
1642 age-spec>...]
1643 Run the reinstall-old subcommand. If it fails, run the move-to
1644 subcommand.
1645 dnf [options] repository-packages <repoid> reinstall-old [<pack‐
1647 age-spec>...]
1648 Reinstall all those packages that were installed from the repos‐
1649 itory and simultaneously are available in the repository.
1650 dnf [options] repository-packages <repoid> remove [<package-spec>...]
1652 Remove all packages installed from the repository along with any
1653 packages depending on the packages being removed. If
1654 clean_requirements_on_remove is enabled (the default) also
1655 removes any dependencies that are no longer needed.
1656 dnf [options] repository-packages <repoid> remove-or-distro-sync
1658 [<package-spec>...]
1659 Select all packages installed from the repository. Upgrade,
1660 downgrade or keep those of them that are available in another
1661 repository to match the latest version available there and
1662 remove the others along with any packages depending on the pack‐
1663 ages being removed. If clean_requirements_on_remove is enabled
1664 (the default) also removes any dependencies that are no longer
1665 needed.
1666 dnf [options] repository-packages <repoid> remove-or-reinstall [<pack‐
1668 age-spec>...]
1669 Select all packages installed from the repository. Reinstall
1670 those of them that are available in another repository and
1671 remove the others along with any packages depending on the pack‐
1672 ages being removed. If clean_requirements_on_remove is enabled
1673 (the default) also removes any dependencies that are no longer
1674 needed.
1675 dnf [options] repository-packages <repoid> upgrade [<package-spec>...]
1677 Update all packages to the highest resolvable version available
1678 in the repository. When versions are specified in the <pack‐
1679 age-spec>, update to these versions.
1680 dnf [options] repository-packages <repoid> upgrade-to [<pack‐
1682 age-specs>...]
1683 A deprecated alias for the upgrade subcommand.
1684 Search Command
1686 Command: search
1687 Aliases: se
1688 dnf [options] search [--all] <keywords>...
1691 Search package metadata for keywords. Keywords are matched as
1692 case-insensitive substrings, globbing is supported. By default
1693 lists packages that match all requested keys (AND operation).
1694 Keys are searched in package names and summaries. If the
1695 "--all" option is used, lists packages that match at least one
1696 of the keys (an OR operation). In addition the keys are
1697 searched in the package descriptions and URLs. The result is
1698 sorted from the most relevant results to the least.
1699 This command by default does not force a sync of expired metadata. See
1701 also Metadata Synchronization.
1702 Shell Command
1704 Command: shell
1705 Aliases: sh
1706 dnf [options] shell [filename]
1709 Open an interactive shell for conducting multiple commands dur‐
1710 ing a single execution of DNF. These commands can be issued man‐
1711 ually or passed to DNF from a file. The commands are much the
1712 same as the normal DNF command line options. There are a few
1713 additional commands documented below.
1714 config [conf-option] [value]
1716 · Set a configuration option to a requested value. If no
1718 value is given it prints the current value.
1719 repo [list|enable|disable] [repo-id]
1721 · list: list repositories and their status
1723 · enable: enable repository
1725 · disable: disable repository
1727 transaction [list|reset|solve|run]
1729 · list: resolve and list the content of the transaction
1731 · reset: reset the transaction
1733 · run: resolve and run the transaction
1735 Note that all local packages must be used in the first shell
1737 transaction subcommand (e.g. install /tmp/nodejs-1-1.x86_64.rpm
1738 /tmp/acpi-1-1.noarch.rpm) otherwise an error will occur. Any
1739 disable, enable, and reset module operations (e.g. module enable
1740 nodejs) must also be performed before any other shell transac‐
1741 tion subcommand is used.
1742 Swap Command
1744 Command: swap
1745 dnf [options] swap <remove-spec> <install-spec>
1748 Remove spec and install spec in one transaction. Each <spec> can be
1749 either a <package-spec>, which specifies a package directly, or a
1750 @<group-spec>, which specifies an (environment) group which contains
1751 it. Automatic conflict solving is provided in DNF by the --allow‐
1752 erasing option that provides the functionality of the swap command
1753 automatically.
1754 Updateinfo Command
1756 Command: updateinfo
1757 Deprecated aliases: list-updateinfo, list-security, list-sec, info-updateinfo, info-security, info-sec, summary-updateinfo
1758 dnf [options] updateinfo [--summary|--list|--info] [<availability>]
1761 [<spec>...]
1762 Display information about update advisories.
1763 Depending on the output type, DNF displays just counts of advi‐
1765 sory types (omitted or --summary), list of advisories (--list)
1766 or detailed information (--info). The -v option extends the out‐
1767 put. When used with --info, the information is even more
1768 detailed. When used with --list, an additional column with date
1769 of the last advisory update is added.
1770 <availability> specifies whether advisories about newer versions
1772 of installed packages (omitted or --available), advisories about
1773 equal and older versions of installed packages (--installed),
1774 advisories about newer versions of those installed packages for
1775 which a newer version is available (--updates) or advisories
1776 about any versions of installed packages (--all) are taken into
1777 account. Most of the time, --available and --updates displays
1778 the same output. The outputs differ only in the cases when an
1779 advisory refers to a newer version but there is no enabled
1780 repository which contains any newer version.
1781 Note, that --available tooks only the latest installed versions
1783 of packages into account. In case of the kernel packages (when
1784 multiple version could be installed simultaneously) also pack‐
1785 ages of the currently running version of kernel are added.
1786 To print only advisories referencing a CVE or a bugzilla use
1788 --with-cve or --with-bz options. When these switches are used
1789 also the output of the --list is altered - the ID of the CVE or
1790 the bugzilla is printed instead of the one of the advisory.
1791 If given and if neither ID, type (bugfix, enhancement, secu‐
1793 rity/sec) nor a package name of an advisory matches <spec>, the
1794 advisory is not taken into account. The matching is case-sensi‐
1795 tive and in the case of advisory IDs and package names, globbing
1796 is supported.
1797 Output of the --summary option is affected by the autocheck_run‐
1799 ning_kernel configuration option.
1800 Upgrade Command
1802 Command: upgrade
1803 Aliases: up
1804 Deprecated aliases: update, upgrade-to, update-to, localupdate
1805 dnf [options] upgrade
1808 Updates each package to the latest version that is both avail‐
1809 able and resolvable.
1810 dnf [options] upgrade <package-spec>...
1812 Updates each specified package to the latest available version.
1813 Updates dependencies as necessary. When versions are specified
1814 in the <package-spec>, update to these versions.
1815 dnf [options] upgrade @<spec>...
1817 Alias for the dnf module update command.
1818 If the main obsoletes configure option is true or the --obsoletes flag
1820 is present, dnf will include package obsoletes in its calculations.
1821 For more information see obsoletes.
1822 See also Configuration Files Replacement Policy.
1824 Upgrade-Minimal Command
1826 Command: upgrade-minimal
1827 Aliases: up-min
1828 Deprecated aliases: update-minimal
1829 dnf [options] upgrade-minimal
1832 Updates each package to the latest available version that pro‐
1833 vides a bugfix, enhancement or a fix for a security issue (secu‐
1834 rity).
1835 dnf [options] upgrade-minimal <package-spec>...
1837 Updates each specified package to the latest available version
1838 that provides a bugfix, enhancement or a fix for security issue
1839 (security). Updates dependencies as necessary.
1840
1842 Many commands take a <package-spec> parameter that selects a package
1843 for the operation. The <package-spec> argument is matched against pack‐
1844 age NEVRAs, provides and file provides.
1845 <package-file-spec> is similar to <package-spec>, except provides
1847 matching is not performed. Therefore, <package-file-spec> is matched
1848 only against NEVRAs and file provides.
1849 <package-name-spec> is matched against NEVRAs only.
1851 Globs
1853 Package specification supports the same glob pattern matching that
1854 shell does, in all three above mentioned packages it matches against
1855 (NEVRAs, provides and file provides).
1856 The following patterns are supported:
1858 * Matches any number of characters.
1860 ? Matches any single character.
1862 [] Matches any one of the enclosed characters. A pair of characters
1864 separated by a hyphen denotes a range expression; any character
1865 that falls between those two characters, inclusive, is matched.
1866 If the first character following the [ is a ! or a ^ then any
1867 character not enclosed is matched.
1868 Note: Curly brackets ({}) are not supported. You can still use them in
1870 shells that support them and let the shell do the expansion, but if
1871 quoted or escaped, dnf will not expand them.
1872 NEVRA Matching
1874 When matching against NEVRAs, partial matching is supported. DNF tries
1875 to match the spec against the following list of NEVRA forms (in
1876 decreasing order of priority):
1877 · name-[epoch:]version-release.arch
1879 · name.arch
1881 · name
1883 · name-[epoch:]version-release
1885 · name-[epoch:]version
1887 Note that name can in general contain dashes (e.g. pack‐
1889 age-with-dashes).
1890 The first form that matches any packages is used and the remaining
1892 forms are not tried. If none of the forms match any packages, an
1893 attempt is made to match the <package-spec> against full package
1894 NEVRAs. This is only relevant if globs are present in the <pack‐
1895 age-spec>.
1896 <package-spec> matches NEVRAs the same way <package-name-spec> does,
1898 but in case matching NEVRAs fails, it attempts to match against pro‐
1899 vides and file provides of packages as well.
1900 You can specify globs as part of any of the five NEVRA components. You
1902 can also specify a glob pattern to match over multiple NEVRA components
1903 (in other words, to match across the NEVRA separators). In that case,
1904 however, you need to write the spec to match against full package
1905 NEVRAs, as it is not possible to split such spec into NEVRA forms.
1906 Specifying NEVRA Matching Explicitly
1908 Some commands (autoremove, install, remove and repoquery) also have
1909 aliases with suffixes -n, -na and -nevra that allow to explicitly spec‐
1910 ify how to parse the arguments:
1911 · Command install-n only matches against name.
1913 · Command install-na only matches against name.arch.
1915 · Command install-nevra only matches against name-[epoch:]ver‐
1917 sion-release.arch.
1918
1920 <provide-spec> in command descriptions means the command operates on
1921 packages providing the given spec. This can either be an explicit pro‐
1922 vide, an implicit provide (i.e. name of the package) or a file provide.
1923 The selection is case-sensitive and globbing is supported.
1924
1926 <group-spec> allows one to select (environment) groups a particular
1927 operation should work on. It is a case insensitive string (supporting
1928 globbing characters) that is matched against a group's ID, canonical
1929 name and name translated into the current LC_MESSAGES locale (if possi‐
1930 ble).
1931
1933 <module-spec> allows one to select modules or profiles a particular
1934 operation should work on.
1935 It is in the form of NAME:STREAM:VERSION:CONTEXT:ARCH/PROFILE and sup‐
1937 ported partial forms are the following:
1938 · NAME
1940 · NAME:STREAM
1942 · NAME:STREAM:VERSION
1944 · NAME:STREAM:VERSION:CONTEXT
1946 · all above combinations with ::ARCH (e.g. NAME::ARCH)
1948 · NAME:STREAM:VERSION:CONTEXT:ARCH
1950 · all above combinations with /PROFILE (e.g. NAME/PROFILE)
1952 In case stream is not specified, the enabled or the default stream is
1954 used, in this order. In case profile is not specified, the system
1955 default profile or the 'default' profile is used.
1956
1958 <transaction-spec> can be in one of several forms. If it is an integer,
1959 it specifies a transaction ID. Specifying last is the same as specify‐
1960 ing the ID of the most recent transaction. The last form is last-<off‐
1961 set>, where <offset> is a positive integer. It specifies offset-th
1962 transaction preceding the most recent transaction.
1963
1965 Package filtering filters packages out from the available package set,
1966 making them invisible to most of dnf commands. They cannot be used in a
1967 transaction. Packages can be filtered out by either Exclude Filtering
1968 or Modular Filtering.
1969 Exclude Filtering
1971 Exclude Filtering is a mechanism used by a user or by a DNF plugin to
1972 modify the set of available packages. Exclude Filtering can be modified
1973 by either includepkgs or excludepkgs configuration options in configu‐
1974 ration files. The --disableexcludes command line option can be used to
1975 override excludes from configuration files. In addition to user-config‐
1976 ured excludes, plugins can also extend the set of excluded packages. To
1977 disable excludes from a DNF plugin you can use the --disableplugin com‐
1978 mand line option.
1979 To disable all excludes for e.g. the install command you can use the
1981 following combination of command line options:
1982 dnf --disableexcludes=all --disableplugin="*" install bash
1984 Modular Filtering
1986 Please see the modularity documentation for details on how Modular Fil‐
1987 tering works.
1988 With modularity, only RPM packages from active module streams are
1990 included in the available package set. RPM packages from inactive mod‐
1991 ule streams, as well as non-modular packages with the same name or pro‐
1992 vides as a package from an active module stream, are filtered out. Mod‐
1993 ular filtering is not applied to packages added from the command line,
1994 installed packages, or packages from repositories with module_hot‐
1995 fixes=true in their .repo file.
1996 Disabling of modular filtering is not recommended, because it could
1998 cause the system to get into a broken state. To disable modular filter‐
1999 ing for a particular repository, specify module_hotfixes=true in the
2000 .repo file or use --setopt=<repo_id>.module_hotfixes=true.
2001 To discover the module which contains an excluded package use dnf mod‐
2003 ule provides.
2004
2006 Correct operation of DNF depends on having access to up-to-date data
2007 from all enabled repositories but contacting remote mirrors on every
2008 operation considerably slows it down and costs bandwidth for both the
2009 client and the repository provider. The metadata_expire (see
2010 dnf.conf(5)) repository configuration option is used by DNF to deter‐
2011 mine whether a particular local copy of repository data is due to be
2012 re-synced. It is crucial that the repository providers set the option
2013 well, namely to a value where it is guaranteed that if particular meta‐
2014 data was available in time T on the server, then all packages it refer‐
2015 ences will still be available for download from the server in time T +
2016 metadata_expire.
2017 To further reduce the bandwidth load, some of the commands where having
2019 up-to-date metadata is not critical (e.g. the list command) do not look
2020 at whether a repository is expired and whenever any version of it is
2021 locally available to the user's account, it will be used. For non-root
2022 use, see also the --cacheonly switch. Note that in all situations the
2023 user can force synchronization of all enabled repositories with the
2024 --refresh switch.
2025
2027 The updated packages could replace the old modified configuration files
2028 with the new ones or keep the older files. Neither of the files are
2029 actually replaced. To the conflicting ones RPM gives additional suffix
2030 to the origin name. Which file should maintain the true name after
2031 transaction is not controlled by package manager but is specified by
2032 each package itself, following packaging guideline.
2033
2035 Cache Files
2036 /var/cache/dnf
2037 Main Configuration
2039 /etc/dnf/dnf.conf
2040 Repository
2042 /etc/yum.repos.d/
2043
2045 · dnf.conf(5), DNF Configuration Reference
2046 · dnf-PLUGIN(8) for documentation on DNF plugins.
2048 · dnf.modularity(7), Modularity overview.
2050 · dnf-transaction-json(5), Stored Transaction JSON Format Specifica‐
2052 tion.
2053 · DNF project homepage (‐
2055 https://github.com/rpm-software-management/dnf/)
2056 · How to report a bug (‐
2058 https://github.com/rpm-software-management/dnf/wiki/Bug-Reporting)
2059 · YUM project homepage (http://yum.baseurl.org/)
2061
2063 See AUTHORS in DNF source distribution.
2064
2066 2012-2021, Red Hat, Licensed under GPLv2+
20674.6.1 Mar 02, 2021 YUM(8)