1GTKTERM(1)                  General Commands Manual                 GTKTERM(1)
2
3
4

NAME

6       gtkterm - A simple GTK+ serial port terminal
7
8

SYNOPSIS

10       gtkterm [ options ]
11
12

DESCRIPTION

14       gtkterm  is  a simple GTK+ terminal used to communicate with the serial
15       port.
16
17

OPTIONS

19       gtkterm accepts the following options:
20
21       -h, --help Help screen.
22
23       -c, --config <configuration>
24              Load configuration (default is "default").
25
26       -p, --port <device>
27              Serial port device (default /dev/ttyS0).
28
29       -s, --speed <speed>
30              Serial port speed (default 9600).
31
32       -b, --bits <bits>
33              Number of bits (default 8).
34
35       -t, --stopbits <stopbits>
36              Number of stopbits (default 1).
37
38       -a, --parity <odd | even>
39              Partity (default none).
40
41       -w, --flow <Xon | CTS>
42              Flow control (default none).
43
44       -d, --delay <ms>
45              End of line delay in ms (default none).
46
47       -r, --char <char>
48              Wait for a special char at end of line (default none).
49
50       -f, --file <filename>
51              Default file to send (default none).
52
53       -e, --echo
54              Set local echo.
55
56

AUTHOR

58       gtkterm was written by Julien Schmitt.  Maintained  at  https://fedora
59       hosted.org/gtkterm/ By Zach Davis
60
61       This  manual  page was written by Sebastien Bacher <seb128@debian.org>,
62       for the Debian GNU/Linux system (but may be used by others).
63
64
65
66                                August 26, 2010                     GTKTERM(1)
Impressum