1KADMIN(1) MIT Kerberos KADMIN(1)
2
6 kadmin - Kerberos V5 database administration program
7
9 kadmin [-O|-N] [-r realm] [-p principal] [-q query] [[-c
10 cache_name]|[-k [-t keytab]]|-n] [-w password] [-s admin_server[:port]]
11 [command args...]
12 kadmin.local [-r realm] [-p principal] [-q query] [-d dbname] [-e
14 enc:salt ...] [-m] [-x db_args] [command args...]
15
17 kadmin and kadmin.local are command-line interfaces to the Kerberos V5
18 administration system. They provide nearly identical functionalities;
19 the difference is that kadmin.local directly accesses the KDC database,
20 while kadmin performs operations using kadmind(8). Except as explic‐
21 itly noted otherwise, this man page will use "kadmin" to refer to both
22 versions. kadmin provides for the maintenance of Kerberos principals,
23 password policies, and service key tables (keytabs).
24 The remote kadmin client uses Kerberos to authenticate to kadmind using
26 the service principal kadmin/admin or kadmin/ADMINHOST (where ADMINHOST
27 is the fully-qualified hostname of the admin server). If the creden‐
28 tials cache contains a ticket for one of these principals, and the -c
29 credentials_cache option is specified, that ticket is used to authenti‐
30 cate to kadmind. Otherwise, the -p and -k options are used to specify
31 the client Kerberos principal name used to authenticate. Once kadmin
32 has determined the principal name, it requests a service ticket from
33 the KDC, and uses that service ticket to authenticate to kadmind.
34 Since kadmin.local directly accesses the KDC database, it usually must
36 be run directly on the primary KDC with sufficient permissions to read
37 the KDC database. If the KDC database uses the LDAP database module,
38 kadmin.local can be run on any host which can access the LDAP server.
39
41 -r realm
42 Use realm as the default database realm.
43 -p principal
45 Use principal to authenticate. Otherwise, kadmin will append
46 /admin to the primary principal name of the default ccache, the
47 value of the USER environment variable, or the username as ob‐
48 tained with getpwuid, in order of preference.
49 -k Use a keytab to decrypt the KDC response instead of prompting
51 for a password. In this case, the default principal will be
52 host/hostname. If there is no keytab specified with the -t op‐
53 tion, then the default keytab will be used.
54 -t keytab
56 Use keytab to decrypt the KDC response. This can only be used
57 with the -k option.
58 -n Requests anonymous processing. Two types of anonymous princi‐
60 pals are supported. For fully anonymous Kerberos, configure
61 PKINIT on the KDC and configure pkinit_anchors in the client's
62 krb5.conf(5). Then use the -n option with a principal of the
63 form @REALM (an empty principal name followed by the at-sign and
64 a realm name). If permitted by the KDC, an anonymous ticket
65 will be returned. A second form of anonymous tickets is sup‐
66 ported; these realm-exposed tickets hide the identity of the
67 client but not the client's realm. For this mode, use kinit -n
68 with a normal principal name. If supported by the KDC, the
69 principal (but not realm) will be replaced by the anonymous
70 principal. As of release 1.8, the MIT Kerberos KDC only sup‐
71 ports fully anonymous operation.
72 -c credentials_cache
74 Use credentials_cache as the credentials cache. The cache
75 should contain a service ticket for the kadmin/admin or kad‐
76 min/ADMINHOST (where ADMINHOST is the fully-qualified hostname
77 of the admin server) service; it can be acquired with the
78 kinit(1) program. If this option is not specified, kadmin re‐
79 quests a new service ticket from the KDC, and stores it in its
80 own temporary ccache.
81 -w password
83 Use password instead of prompting for one. Use this option with
84 care, as it may expose the password to other users on the system
85 via the process list.
86 -q query
88 Perform the specified query and then exit.
89 -d dbname
91 Specifies the name of the KDC database. This option does not
92 apply to the LDAP database module.
93 -s admin_server[:port]
95 Specifies the admin server which kadmin should contact.
96 -m If using kadmin.local, prompt for the database master password
98 instead of reading it from a stash file.
99 -e "enc:salt ..."
101 Sets the keysalt list to be used for any new keys created. See
102 Keysalt_lists in kdc.conf(5) for a list of possible values.
103 -O Force use of old AUTH_GSSAPI authentication flavor.
105 -N Prevent fallback to AUTH_GSSAPI authentication flavor.
107 -x db_args
109 Specifies the database specific arguments. See the next section
110 for supported options.
111 Starting with release 1.14, if any command-line arguments remain after
113 the options, they will be treated as a single query to be executed.
114 This mode of operation is intended for scripts and behaves differently
115 from the interactive mode in several respects:
116 • Query arguments are split by the shell, not by kadmin.
118 • Informational and warning messages are suppressed. Error messages
120 and query output (e.g. for get_principal) will still be displayed.
121 • Confirmation prompts are disabled (as if -force was given). Password
123 prompts will still be issued as required.
124 • The exit status will be non-zero if the query fails.
126 The -q option does not carry these behavior differences; the query will
128 be processed as if it was entered interactively. The -q option cannot
129 be used in combination with a query in the remaining arguments.
130
132 Database options can be used to override database-specific defaults.
133 Supported options for the DB2 module are:
134 -x dbname=*filename*
136 Specifies the base filename of the DB2 database.
137 -x lockiter
139 Make iteration operations hold the lock for the duration of
140 the entire operation, rather than temporarily releasing the
141 lock while handling each principal. This is the default be‐
142 havior, but this option exists to allow command line override
143 of a [dbmodules] setting. First introduced in release 1.13.
144 -x unlockiter
146 Make iteration operations unlock the database for each prin‐
147 cipal, instead of holding the lock for the duration of the
148 entire operation. First introduced in release 1.13.
149 Supported options for the LDAP module are:
151 -x host=ldapuri
153 Specifies the LDAP server to connect to by a LDAP URI.
154 -x binddn=bind_dn
156 Specifies the DN used to bind to the LDAP server.
157 -x bindpwd=password
159 Specifies the password or SASL secret used to bind to the
160 LDAP server. Using this option may expose the password to
161 other users on the system via the process list; to avoid
162 this, instead stash the password using the stashsrvpw command
163 of kdb5_ldap_util(8).
164 -x sasl_mech=mechanism
166 Specifies the SASL mechanism used to bind to the LDAP server.
167 The bind DN is ignored if a SASL mechanism is used. New in
168 release 1.13.
169 -x sasl_authcid=name
171 Specifies the authentication name used when binding to the
172 LDAP server with a SASL mechanism, if the mechanism requires
173 one. New in release 1.13.
174 -x sasl_authzid=name
176 Specifies the authorization name used when binding to the
177 LDAP server with a SASL mechanism. New in release 1.13.
178 -x sasl_realm=realm
180 Specifies the realm used when binding to the LDAP server with
181 a SASL mechanism, if the mechanism uses one. New in release
182 1.13.
183 -x debug=level
185 sets the OpenLDAP client library debug level. level is an
186 integer to be interpreted by the library. Debugging messages
187 are printed to standard error. New in release 1.12.
188
190 When using the remote client, available commands may be restricted ac‐
191 cording to the privileges specified in the kadm5.acl(5) file on the ad‐
192 min server.
193 add_principal
195 add_principal [options] newprinc
196 Creates the principal newprinc, prompting twice for a password. If no
198 password policy is specified with the -policy option, and the policy
199 named default is assigned to the principal if it exists. However, cre‐
200 ating a policy named default will not automatically assign this policy
201 to previously existing principals. This policy assignment can be sup‐
202 pressed with the -clearpolicy option.
203 This command requires the add privilege.
205 Aliases: addprinc, ank
207 Options:
209 -expire expdate
211 (getdate string) The expiration date of the principal.
212 -pwexpire pwexpdate
214 (getdate string) The password expiration date.
215 -maxlife maxlife
217 (duration or getdate string) The maximum ticket life for the
218 principal.
219 -maxrenewlife maxrenewlife
221 (duration or getdate string) The maximum renewable life of tick‐
222 ets for the principal.
223 -kvno kvno
225 The initial key version number.
226 -policy policy
228 The password policy used by this principal. If not specified,
229 the policy default is used if it exists (unless -clearpolicy is
230 specified).
231 -clearpolicy
233 Prevents any policy from being assigned when -policy is not
234 specified.
235 {-|+}allow_postdated
237 -allow_postdated prohibits this principal from obtaining post‐
238 dated tickets. +allow_postdated clears this flag.
239 {-|+}allow_forwardable
241 -allow_forwardable prohibits this principal from obtaining for‐
242 wardable tickets. +allow_forwardable clears this flag.
243 {-|+}allow_renewable
245 -allow_renewable prohibits this principal from obtaining renew‐
246 able tickets. +allow_renewable clears this flag.
247 {-|+}allow_proxiable
249 -allow_proxiable prohibits this principal from obtaining proxi‐
250 able tickets. +allow_proxiable clears this flag.
251 {-|+}allow_dup_skey
253 -allow_dup_skey disables user-to-user authentication for this
254 principal by prohibiting others from obtaining a service ticket
255 encrypted in this principal's TGT session key. +allow_dup_skey
256 clears this flag.
257 {-|+}requires_preauth
259 +requires_preauth requires this principal to preauthenticate be‐
260 fore being allowed to kinit. -requires_preauth clears this
261 flag. When +requires_preauth is set on a service principal, the
262 KDC will only issue service tickets for that service principal
263 if the client's initial authentication was performed using
264 preauthentication.
265 {-|+}requires_hwauth
267 +requires_hwauth requires this principal to preauthenticate us‐
268 ing a hardware device before being allowed to kinit. -re‐
269 quires_hwauth clears this flag. When +requires_hwauth is set on
270 a service principal, the KDC will only issue service tickets for
271 that service principal if the client's initial authentication
272 was performed using a hardware device to preauthenticate.
273 {-|+}ok_as_delegate
275 +ok_as_delegate sets the okay as delegate flag on tickets issued
276 with this principal as the service. Clients may use this flag
277 as a hint that credentials should be delegated when authenticat‐
278 ing to the service. -ok_as_delegate clears this flag.
279 {-|+}allow_svr
281 -allow_svr prohibits the issuance of service tickets for this
282 principal. In release 1.17 and later, user-to-user service
283 tickets are still allowed unless the -allow_dup_skey flag is
284 also set. +allow_svr clears this flag.
285 {-|+}allow_tgs_req
287 -allow_tgs_req specifies that a Ticket-Granting Service (TGS)
288 request for a service ticket for this principal is not permit‐
289 ted. +allow_tgs_req clears this flag.
290 {-|+}allow_tix
292 -allow_tix forbids the issuance of any tickets for this princi‐
293 pal. +allow_tix clears this flag.
294 {-|+}needchange
296 +needchange forces a password change on the next initial authen‐
297 tication to this principal. -needchange clears this flag.
298 {-|+}password_changing_service
300 +password_changing_service marks this principal as a password
301 change service principal.
302 {-|+}ok_to_auth_as_delegate
304 +ok_to_auth_as_delegate allows this principal to acquire for‐
305 wardable tickets to itself from arbitrary users, for use with
306 constrained delegation.
307 {-|+}no_auth_data_required
309 +no_auth_data_required prevents PAC or AD-SIGNEDPATH data from
310 being added to service tickets for the principal.
311 {-|+}lockdown_keys
313 +lockdown_keys prevents keys for this principal from leaving the
314 KDC via kadmind. The chpass and extract operations are denied
315 for a principal with this attribute. The chrand operation is
316 allowed, but will not return the new keys. The delete and re‐
317 name operations are also denied if this attribute is set, in or‐
318 der to prevent a malicious administrator from replacing princi‐
319 pals like krbtgt/* or kadmin/* with new principals without the
320 attribute. This attribute can be set via the network protocol,
321 but can only be removed using kadmin.local.
322 -randkey
324 Sets the key of the principal to a random value.
325 -nokey Causes the principal to be created with no key. New in release
327 1.12.
328 -pw password
330 Sets the password of the principal to the specified string and
331 does not prompt for a password. Note: using this option in a
332 shell script may expose the password to other users on the sys‐
333 tem via the process list.
334 -e enc:salt,...
336 Uses the specified keysalt list for setting the keys of the
337 principal. See Keysalt_lists in kdc.conf(5) for a list of pos‐
338 sible values.
339 -x db_princ_args
341 Indicates database-specific options. The options for the LDAP
342 database module are:
343 -x dn=dn
345 Specifies the LDAP object that will contain the Kerberos
346 principal being created.
347 -x linkdn=dn
349 Specifies the LDAP object to which the newly created Ker‐
350 beros principal object will point.
351 -x containerdn=container_dn
353 Specifies the container object under which the Kerberos
354 principal is to be created.
355 -x tktpolicy=policy
357 Associates a ticket policy to the Kerberos principal.
358 NOTE:
360 • The containerdn and linkdn options cannot be specified with
362 the dn option.
363 • If the dn or containerdn options are not specified while
365 adding the principal, the principals are created under the
366 principal container configured in the realm or the realm
367 container.
368 • dn and containerdn should be within the subtrees or princi‐
370 pal container configured in the realm.
371 Example:
373 kadmin: addprinc jennifer
375 No policy specified for "jennifer@ATHENA.MIT.EDU";
376 defaulting to no policy.
377 Enter password for principal jennifer@ATHENA.MIT.EDU:
378 Re-enter password for principal jennifer@ATHENA.MIT.EDU:
379 Principal "jennifer@ATHENA.MIT.EDU" created.
380 kadmin:
381 modify_principal
383 modify_principal [options] principal
384 Modifies the specified principal, changing the fields as specified.
386 The options to add_principal also apply to this command, except for the
387 -randkey, -pw, and -e options. In addition, the option -clearpolicy
388 will clear the current policy of a principal.
389 This command requires the modify privilege.
391 Alias: modprinc
393 Options (in addition to the addprinc options):
395 -unlock
397 Unlocks a locked principal (one which has received too many
398 failed authentication attempts without enough time between them
399 according to its password policy) so that it can successfully
400 authenticate.
401 rename_principal
403 rename_principal [-force] old_principal new_principal
404 Renames the specified old_principal to new_principal. This command
406 prompts for confirmation, unless the -force option is given.
407 This command requires the add and delete privileges.
409 Alias: renprinc
411 delete_principal
413 delete_principal [-force] principal
414 Deletes the specified principal from the database. This command
416 prompts for deletion, unless the -force option is given.
417 This command requires the delete privilege.
419 Alias: delprinc
421 change_password
423 change_password [options] principal
424 Changes the password of principal. Prompts for a new password if nei‐
426 ther -randkey or -pw is specified.
427 This command requires the changepw privilege, or that the principal
429 running the program is the same as the principal being changed.
430 Alias: cpw
432 The following options are available:
434 -randkey
436 Sets the key of the principal to a random value.
437 -pw password
439 Set the password to the specified string. Using this option in
440 a script may expose the password to other users on the system
441 via the process list.
442 -e enc:salt,...
444 Uses the specified keysalt list for setting the keys of the
445 principal. See Keysalt_lists in kdc.conf(5) for a list of pos‐
446 sible values.
447 -keepold
449 Keeps the existing keys in the database. This flag is usually
450 not necessary except perhaps for krbtgt principals.
451 Example:
453 kadmin: cpw systest
455 Enter password for principal systest@BLEEP.COM:
456 Re-enter password for principal systest@BLEEP.COM:
457 Password for systest@BLEEP.COM changed.
458 kadmin:
459 purgekeys
461 purgekeys [-all|-keepkvno oldest_kvno_to_keep] principal
462 Purges previously retained old keys (e.g., from change_password -keep‐
464 old) from principal. If -keepkvno is specified, then only purges keys
465 with kvnos lower than oldest_kvno_to_keep. If -all is specified, then
466 all keys are purged. The -all option is new in release 1.12.
467 This command requires the modify privilege.
469 get_principal
471 get_principal [-terse] principal
472 Gets the attributes of principal. With the -terse option, outputs
474 fields as quoted tab-separated strings.
475 This command requires the inquire privilege, or that the principal run‐
477 ning the the program to be the same as the one being listed.
478 Alias: getprinc
480 Examples:
482 kadmin: getprinc tlyu/admin
484 Principal: tlyu/admin@BLEEP.COM
485 Expiration date: [never]
486 Last password change: Mon Aug 12 14:16:47 EDT 1996
487 Password expiration date: [never]
488 Maximum ticket life: 0 days 10:00:00
489 Maximum renewable life: 7 days 00:00:00
490 Last modified: Mon Aug 12 14:16:47 EDT 1996 (bjaspan/admin@BLEEP.COM)
491 Last successful authentication: [never]
492 Last failed authentication: [never]
493 Failed password attempts: 0
494 Number of keys: 1
495 Key: vno 1, aes256-cts-hmac-sha384-192
496 MKey: vno 1
497 Attributes:
498 Policy: [none]
499 kadmin: getprinc -terse systest
501 systest@BLEEP.COM 3 86400 604800 1
502 785926535 753241234 785900000
503 tlyu/admin@BLEEP.COM 786100034 0 0
504 kadmin:
505 list_principals
507 list_principals [expression]
508 Retrieves all or some principal names. expression is a shell-style
510 glob expression that can contain the wild-card characters ?, *, and [].
511 All principal names matching the expression are printed. If no expres‐
512 sion is provided, all principal names are printed. If the expression
513 does not contain an @ character, an @ character followed by the local
514 realm is appended to the expression.
515 This command requires the list privilege.
517 Alias: listprincs, get_principals, getprincs
519 Example:
521 kadmin: listprincs test*
523 test3@SECURE-TEST.OV.COM
524 test2@SECURE-TEST.OV.COM
525 test1@SECURE-TEST.OV.COM
526 testuser@SECURE-TEST.OV.COM
527 kadmin:
528 get_strings
530 get_strings principal
531 Displays string attributes on principal.
533 This command requires the inquire privilege.
535 Alias: getstrs
537 set_string
539 set_string principal name value
540 Sets a string attribute on principal. String attributes are used to
542 supply per-principal configuration to the KDC and some KDC plugin mod‐
543 ules. The following string attribute names are recognized by the KDC:
544 require_auth
546 Specifies an authentication indicator which is required to au‐
547 thenticate to the principal as a service. Multiple indicators
548 can be specified, separated by spaces; in this case any of the
549 specified indicators will be accepted. (New in release 1.14.)
550 session_enctypes
552 Specifies the encryption types supported for session keys when
553 the principal is authenticated to as a server. See Encryp‐
554 tion_types in kdc.conf(5) for a list of the accepted values.
555 otp Enables One Time Passwords (OTP) preauthentication for a client
557 principal. The value is a JSON string representing an array of
558 objects, each having optional type and username fields.
559 pkinit_cert_match
561 Specifies a matching expression that defines the certificate at‐
562 tributes required for the client certificate used by the princi‐
563 pal during PKINIT authentication. The matching expression is in
564 the same format as those used by the pkinit_cert_match option in
565 krb5.conf(5). (New in release 1.16.)
566 This command requires the modify privilege.
568 Alias: setstr
570 Example:
572 set_string host/foo.mit.edu session_enctypes aes128-cts
574 set_string user@FOO.COM otp "[{""type"":""hotp"",""username"":""al""}]"
575 del_string
577 del_string principal key
578 Deletes a string attribute from principal.
580 This command requires the delete privilege.
582 Alias: delstr
584 add_policy
586 add_policy [options] policy
587 Adds a password policy named policy to the database.
589 This command requires the add privilege.
591 Alias: addpol
593 The following options are available:
595 -maxlife time
597 (duration or getdate string) Sets the maximum lifetime of a
598 password.
599 -minlife time
601 (duration or getdate string) Sets the minimum lifetime of a
602 password.
603 -minlength length
605 Sets the minimum length of a password.
606 -minclasses number
608 Sets the minimum number of character classes required in a pass‐
609 word. The five character classes are lower case, upper case,
610 numbers, punctuation, and whitespace/unprintable characters.
611 -history number
613 Sets the number of past keys kept for a principal. This option
614 is not supported with the LDAP KDC database module.
615 -maxfailure maxnumber
617 Sets the number of authentication failures before the principal
618 is locked. Authentication failures are only tracked for princi‐
619 pals which require preauthentication. The counter of failed at‐
620 tempts resets to 0 after a successful attempt to authenticate.
621 A maxnumber value of 0 (the default) disables lockout.
622 -failurecountinterval failuretime
624 (duration or getdate string) Sets the allowable time between au‐
625 thentication failures. If an authentication failure happens af‐
626 ter failuretime has elapsed since the previous failure, the num‐
627 ber of authentication failures is reset to 1. A failuretime
628 value of 0 (the default) means forever.
629 -lockoutduration lockouttime
631 (duration or getdate string) Sets the duration for which the
632 principal is locked from authenticating if too many authentica‐
633 tion failures occur without the specified failure count interval
634 elapsing. A duration of 0 (the default) means the principal re‐
635 mains locked out until it is administratively unlocked with mod‐
636 princ -unlock.
637 -allowedkeysalts
639 Specifies the key/salt tuples supported for long-term keys when
640 setting or changing a principal's password/keys. See
641 Keysalt_lists in kdc.conf(5) for a list of the accepted values,
642 but note that key/salt tuples must be separated with commas
643 (',') only. To clear the allowed key/salt policy use a value of
644 '-'.
645 Example:
647 kadmin: add_policy -maxlife "2 days" -minlength 5 guests
649 kadmin:
650 modify_policy
652 modify_policy [options] policy
653 Modifies the password policy named policy. Options are as described
655 for add_policy.
656 This command requires the modify privilege.
658 Alias: modpol
660 delete_policy
662 delete_policy [-force] policy
663 Deletes the password policy named policy. Prompts for confirmation be‐
665 fore deletion. The command will fail if the policy is in use by any
666 principals.
667 This command requires the delete privilege.
669 Alias: delpol
671 Example:
673 kadmin: del_policy guests
675 Are you sure you want to delete the policy "guests"?
676 (yes/no): yes
677 kadmin:
678 get_policy
680 get_policy [ -terse ] policy
681 Displays the values of the password policy named policy. With the
683 -terse flag, outputs the fields as quoted strings separated by tabs.
684 This command requires the inquire privilege.
686 Alias: getpol
688 Examples:
690 kadmin: get_policy admin
692 Policy: admin
693 Maximum password life: 180 days 00:00:00
694 Minimum password life: 00:00:00
695 Minimum password length: 6
696 Minimum number of password character classes: 2
697 Number of old keys kept: 5
698 Reference count: 17
699 kadmin: get_policy -terse admin
701 admin 15552000 0 6 2 5 17
702 kadmin:
703 The "Reference count" is the number of principals using that policy.
705 With the LDAP KDC database module, the reference count field is not
706 meaningful.
707 list_policies
709 list_policies [expression]
710 Retrieves all or some policy names. expression is a shell-style glob
712 expression that can contain the wild-card characters ?, *, and []. All
713 policy names matching the expression are printed. If no expression is
714 provided, all existing policy names are printed.
715 This command requires the list privilege.
717 Aliases: listpols, get_policies, getpols.
719 Examples:
721 kadmin: listpols
723 test-pol
724 dict-only
725 once-a-min
726 test-pol-nopw
727 kadmin: listpols t*
729 test-pol
730 test-pol-nopw
731 kadmin:
732 ktadd
734 ktadd [options] principal
735 ktadd [options] -glob princ-exp
736 Adds a principal, or all principals matching princ-exp, to a keytab
739 file. Each principal's keys are randomized in the process. The rules
740 for princ-exp are described in the list_principals command.
741 This command requires the inquire and changepw privileges. With the
743 -glob form, it also requires the list privilege.
744 The options are:
746 -k[eytab] keytab
748 Use keytab as the keytab file. Otherwise, the default keytab is
749 used.
750 -e enc:salt,...
752 Uses the specified keysalt list for setting the new keys of the
753 principal. See Keysalt_lists in kdc.conf(5) for a list of pos‐
754 sible values.
755 -q Display less verbose information.
757 -norandkey
759 Do not randomize the keys. The keys and their version numbers
760 stay unchanged. This option cannot be specified in combination
761 with the -e option.
762 An entry for each of the principal's unique encryption types is added,
764 ignoring multiple keys with the same encryption type but different salt
765 types.
766 Alias: xst
768 Example:
770 kadmin: ktadd -k /tmp/foo-new-keytab host/foo.mit.edu
772 Entry for principal host/foo.mit.edu@ATHENA.MIT.EDU with kvno 3,
773 encryption type aes256-cts-hmac-sha1-96 added to keytab
774 FILE:/tmp/foo-new-keytab
775 kadmin:
776 ktremove
778 ktremove [options] principal [kvno | all | old]
779 Removes entries for the specified principal from a keytab. Requires no
781 permissions, since this does not require database access.
782 If the string "all" is specified, all entries for that principal are
784 removed; if the string "old" is specified, all entries for that princi‐
785 pal except those with the highest kvno are removed. Otherwise, the
786 value specified is parsed as an integer, and all entries whose kvno
787 match that integer are removed.
788 The options are:
790 -k[eytab] keytab
792 Use keytab as the keytab file. Otherwise, the default keytab is
793 used.
794 -q Display less verbose information.
796 Alias: ktrem
798 Example:
800 kadmin: ktremove kadmin/admin all
802 Entry for principal kadmin/admin with kvno 3 removed from keytab
803 FILE:/etc/krb5.keytab
804 kadmin:
805 lock
807 Lock database exclusively. Use with extreme caution! This command
808 only works with the DB2 KDC database module.
809 unlock
811 Release the exclusive database lock.
812 list_requests
814 Lists available for kadmin requests.
815 Aliases: lr, ?
817 quit
819 Exit program. If the database was locked, the lock is released.
820 Aliases: exit, q
822
824 The kadmin program was originally written by Tom Yu at MIT, as an in‐
825 terface to the OpenVision Kerberos administration program.
826
828 See kerberos(7) for a description of Kerberos environment variables.
829
831 kpasswd(1), kadmind(8), kerberos(7)
832
834 MIT
835
837 1985-2021, MIT
8381.19.1 KADMIN(1)