1NETKEY-TOOL(1) OpenSC Tools NETKEY-TOOL(1)
2
6 netkey-tool - administrative utility for Netkey E4 cards
7
9 netkey-tool [OPTIONS] [COMMAND]
10
12 The netkey-tool utility can be used from the command line to perform
13 some smart card operations with NetKey E4 cards that cannot be done
14 easily with other OpenSC-tools, such as changing local PINs, storing
15 certificates into empty NetKey E4 cert-files or displaying the initial
16 PUK-value.
17
19 --help, -h
20 Displays a short help message.
21 --pin pin, -p pin
23 Specifies the current value of the global PIN.
24 --puk pin, -u pin
26 Specifies the current value of the global PUK.
27 --pin0 pin, -0 pin
29 Specifies the current value of the local PIN0 (aka local PIN).
30 --pin1 pin, -1 pin
32 Specifies the current value of the local PIN1 (aka local PUK).
33 --reader arg, -r arg
35 Number of the reader to use. By default, the first reader with a
36 present card is used. If arg is an ATR, the reader with a matching
37 card will be chosen.
38 -v
40 Causes netkey-tool to be more verbose. This options may be
41 specified multiple times to increase verbosity.
42
44 With the -p, -u, -0 or the -1 one of the cards pins may be specified.
45 You may use plain ascii-strings (i.e. 123456) or a hex-string (i.e.
46 31:32:33:34:35:36). A hex-string must consist of exactly n 2-digit
47 hexnumbers separated by n-1 colons. Otherwise it will be interpreted as
48 an ascii string. For example :12:34: and 1:2:3:4 are both pins of
49 length 7, while 12:34 and 01:02:03:04 are pins of length 2 and 4.
50
52 When used without any options or commands, netkey-tool will display
53 information about the smart cards pins and certificates. This will not
54 change your card in any aspect (assumed there are no bugs in
55 netkey-tool). In particular the tries-left counters of the pins are
56 investigated without doing actual pin-verifications.
57 If you specify the global PIN via the --pin option, netkey-tool will
59 also display the initial value of the cards global PUK. If your global
60 PUK was changed netkey-tool will still display its initial value.
61 There's no way to recover a lost global PUK once it was changed.
62 There's also no way to display the initial value of your global PUK
63 without knowing the current value of your global PIN.
64 For most of the commands that netkey-tool can execute, you have to
66 specify one pin. One notable exception is the nullpin command, but this
67 command can only be executed once in the lifetime of a NetKey E4 card.
68 cert number filename
70 This command will read one of your cards certificates (as specified
71 by number) and save this certificate into file filename in
72 PEM-format. Certificates on a NetKey E4 card are readable without a
73 pin, so you don't have to specify one.
74 cert filename number
76 This command will read the first PEM-encoded certificate from file
77 filename and store this into your smart cards certificate file
78 number. Some of your smart cards certificate files might be
79 readonly, so this will not work with all values of number. If a
80 certificate file is writable you must specify a pin in order to
81 change it. If you try to use this command without specifying a pin,
82 netkey-tool will tell you which one is needed.
83 change {pin | puk | pin0 | pin1} new-pin
85 This changes the value of the specified pin to the given new value.
86 You must specify either the current value of the pin or another pin
87 to be able to do this and if you don't specify a correct one,
88 netkey-tool will tell you which one is needed.
89 nullpin initial-pin
91 This command can be executed only if the global PIN of your card is
92 in nullpin-state. There's no way to return back to nullpin-state
93 once you have changed your global PIN. You don't need a pin to
94 execute the nullpin-command. After a successful nullpin-command
95 netkey-tool will display your cards initial PUK-value.
96 unblock {pin | pin0 | pin1}
98 This unblocks the specified pin. You must specify another pin to be
99 able to do this and if you don't specify a correct one, netkey-tool
100 will tell you which one is needed.
101
103 opensc-explorer(1)
104
106 netkey-tool was written by Peter Koch <pk_opensc@web.de>.
107opensc 02/25/2021 NETKEY-TOOL(1)