1PMIECONF(1) General Commands Manual PMIECONF(1)
2
6 pmieconf - display and set configurable pmie rule variables
7
9 pmieconf [-cFv?] [-f file] [-r rulepath] [command [args...]]
10
12 pmieconf is a utility for viewing and configuring variables from gener‐
13 alized pmie(1) rules. The set of generalized rules is read in from
14 rulepath, and the output file produced by pmieconf is a valid input
15 file for pmie.
16
18 The available command line options are:
19 -c When run from automated pmie setup processes, this option is used
21 to add a specific message and timestamp indicating that this is
22 the case. Unless over-ridden by the -f flag, the default configu‐
23 ration file to be written or updated when the -c flag is given and
24 pmieconf is run by the root user, is $PCP_VAR_DIR/config/pmie/con‐
25 fig.default. This is also the default configuration file used by
26 the pmie service, see pmie_daily(1). This flag is not appropriate
27 when using the tool interactively.
28 -f file, --config=file
30 Any rule modifications resulting from pmieconf manipulation of
31 variable values will be written to file. The default value of
32 file is dependent on the user ID - for the root user (when the -c
33 flag is not also given, see above) the file is
34 $PCP_SYSCONF_DIR/pmie/config.default. For other users the default
35 is $HOME/.pcp/pmie/config.pmie.
36 -F, --force
38 Forces the pmieconf output file to be created (or updated), after
39 which pmieconf immediately exits.
40 -r rulepath, --rules=rulepath
42 Allows the source of generalized pmie rules to be changed -
43 rulepath is a colon-delimited list of pmieconf(5) rule files
44 and/or subdirectories. The default value for rulepath is
45 $PCP_VAR_DIR/config/pmieconf. Use of this option overrides the
46 PMIECONF_PATH environment variable which has a similar function.
47 -v, --verbose
49 Enable verbose mode. associated variables will be displayed.
50 This is the complete list of variables which affects any given
51 rule (by default, global variables are not displayed with the
52 rule).
53 -?, --help
55 Display usage message and exit.
56 The pmieconf commands allow information related to the various rules
58 and configurable variables to be displayed or modified. If no pmieconf
59 commands are presented on the command line, pmieconf prompts for com‐
60 mands interactively.
61
63 The pmieconf command language is described here:
64 help [ { . | all | global | <rule> | <group> } [<variable>] ]
66 Without arguments, the help command displays the syntax for all
67 of the available pmieconf commands. With one argument, a de‐
68 scription of one or more of the generalized rules is displayed.
69 With two arguments, a description of a specific variable relat‐
70 ing to one or more of the generalized rules is displayed.
71 rules [ enabled | disabled ]
73 Display the name and short summary for all of the generalized
74 rules found on rulepath. Each of the rule names can be used in
75 place of the keyword <rule> in this command syntax description.
76 The enabled and disabled options can be used to filter the set
77 of rules displayed to just those which are enabled or disabled
78 respectfully.
79 groups Display the name of all of the rule groups that were found on
81 rulepath. Each of the group names can be used in place of the
82 keyword <group> in this command syntax description, which ap‐
83 plies the command to all rules within the rule group.
84 status Display status information relating to the current pmieconf
86 session, including a list of running pmie processes which are
87 currently using file.
88 enable { . | all | <rule> | <group> }
90 Enables the specified rule or group of rules. An enabled rule
91 is one which will be included in the pmie configuration file
92 generated by pmieconf. Any enabled "actions" will be appended
93 to the rule's "predicate", in a manner conforming to the pmie
94 syntax ("actions" can be viewed using the list global command,
95 described below).
96 disable { . | all | <rule> | <group> }
98 Disables the specified rule or group of rules. If the rule was
99 previously enabled, it will be removed from the pmie configura‐
100 tion file generated by pmieconf, and hence no longer evaluated
101 when pmie is restarted (using pmieconf does not affect any ex‐
102 isting pmie processes using file).
103 list { . | all | global | <rule> | <group> } [<variable>]
105 Display the values for a specific rule variable; or for all
106 variables of a rule, a rule group, all rules, or the global
107 variables.
108 modify { . | all | global | <rule> | <group> } <variable> <value>
110 Enable, disable, or otherwise change the value for one or more
111 rule variables. This value must be consistent with the type of
112 the variable, which can be inferred from the format of the
113 printed value - e.g. strings will be enclosed in double-quotes,
114 percentages have the ``%'' symbol appended, etc. Note that
115 certain rule variables cannot be modified through pmieconf -
116 "predicate" and "help", for example.
117 undo { . | all | global | <rule> | <group> } [<variable>]
119 Applicable only to a variable whose value has been modified -
120 this command simply reverts to the default value for the given
121 variable.
122 quit Save any changes made to file and then exit pmieconf.
124 abort Exit pmieconf immediately without saving any changes to file.
126 Each of the commands above can be shortened by simply using the first
128 character of the command name, and also ``?'' for help.
129 Use of the all keyword causes the command to be applied to all of the
131 rules. The global keyword refers to those variables which are applied
132 to every rule. Such variables can be changed either globally or lo‐
133 cally, for example:
134 pmieconf> modify global delta "5 minutes"
136 pmieconf> modify memory delta "1 minute"
137 causes all rules to now be evaluated once every five minutes, except
139 for rules in the "memory" group which are to be evaluated once per
140 minute.
141 The ``.'' character is special to pmieconf - it refers to the last suc‐
143 cessfully used value of all, global, <rule> or <group>.
144
146 Specify that all of the rules in the "memory" group should be evalu‐
147 ated:
148 pmieconf> modify memory enabled yes
150 Change your mind, and revert to using only the "memory" rules which
152 were enabled by default:
153 pmieconf> undo memory enabled
155 Specify that notification of rules which evaluate to true should be
157 sent to syslogd(1):
158 pmieconf> modify global syslog_action yes
160 Specify that rules in the "per_cpu" group should use a different hold‐
162 off value to other rules:
163 pmieconf> help global holdoff
165 rule: global [generic parameters applied to all rules]
166 var: holdoff
167 help: Once the predicate is true and the action is executed,
168 this variable allows suppression of further action
169 execution until the specified interval has elapsed.
170 A value of zero enables execution of the action if
171 the rule predicate is true at the next sample. Default
172 units are seconds and common units are "second", "sec",
173 "minute", "min" and "hour".
174 pmieconf> modify per_cpu holdoff "1 hour"
176 Lower the threshold associated with a particular variable for a speci‐
178 fied rule:
179 pmieconf> l cpu.syscall predicate
181 rule: cpu.syscall [High aggregate system call rate]
182 predicate =
183 some_host (
184 ( kernel.all.syscall $hosts$ )
185 > $threshold$ count/sec * hinv.ncpu $hosts$
186 )
187 pmieconf> m . threshold 7000
189 pmieconf> l . threshold
191 rule: cpu.syscall [High aggregate system call rate]
192 threshold = 7000
193
196 $PCP_VAR_DIR/config/pmieconf/*/*
197 generalized system resource monitoring rules
198 $PCP_SYSCONF_DIR/pmie/config.pmie
200 default super-user settings for system resource monitoring rules
201 $HOME/.pcp/pmie/config.pmie
203 default user settings for system resource monitoring rules
204
206 The environment variable PMIECONF_PATH has a similar function to the -r
207 option described above, and if set will be used provided no -r option
208 is presented.
209
211 Environment variables with the prefix PCP_ are used to parameterize the
212 file and directory names used by PCP. On each installation, the file
213 /etc/pcp.conf contains the local values for these variables. The
214 $PCP_CONF variable may be used to specify an alternative configuration
215 file, as described in pcp.conf(5).
216
218 PCPIntro(1), pmie(1), pmie_check(1) and pmieconf(5).
219Performance Co-Pilot PCP PMIECONF(1)