1uhd_image_loader(1) User Commands uhd_image_loader(1)
2
6 uhd_image_loader - UHD Image Loader
7
10 Burn firmware and FPGA images onto connected Ettus Research devices.
11
14 uhd_image_loader [OPTIONS]
15
18 List options:
19 --help
20 Device and loader arguments:
22 --args=""
23 Custom firmware filepath:
25 --fw-path=""
26 Custom FPGA filepath:
28 --fpga-path=""
29 Don't burn firmware:
31 --no-fw
32 Don't burn FPGA:
34 --no-fpga
35
38 Without any arguments given through the args="" option, this utility
39 will start a session with the first Ettus Research device it sees. The
40 arguments shown below will narrow down the utility's search for a par‐
41 ticular device:
42 All devices
45 The name= and serial= arguments can be used to specify any device
46 except an uninitialized USB device or an OctoClock bootloader. The
47 type= argument can be used to specify any device, as described below:
48 "type=" argument
50 Argument | Device
52 type=usrp2 | USRP N200, USRP N210
54 type=b200 | USRP B200, USRP B210
56 type=e3x0 | USRP E310
58 type=octoclock | OctoClock
60 NOTE: The USRP1, USRP2, and USRP B100 are not supported.
63 Network devices
66 By default, this utility will check all network interfaces for network-
67 based devices, but a specific IP address can be specified with the
68 addr= argument.
69 NI-RIO devices
72 An X-Series devices connected via PCIe can be specified by its NI-RIO
73 resource through the resource= argument, and the RPC port through which
74 to communicate with it can be specified with the rpc-port= argument.
75 Using these options is not recommended, as their default values are
76 almost always used.
77 OctoClock devices
80 An OctoClock's name and serial are only exposed when the firmware is
81 loaded, so if the device only has a bootloader, only the addr= argument
82 can be used to find it.
83
86 Certain devices have specific options for customizing their image load‐
87 ing process, and these can be passed in through the --args="" option.
88 These arguments are specified below:
89 USRP N200, USRP N210
92 The overwrite-safe option will overwrite the device's safe-mode
93 firmware and FPGA images. This is NOT RECOMMENDED, as these images
94 serve as the backup if the device's primary images are corrupted.
95 The reset option will automatically reset the device once the loading
98 process finishes. When the device resets, it will have its new images
99 loaded.
100 USRP X300, USRP X310 (Ethernet only)
103 The configure option will automatically reset the device once the load‐
104 ing process finishes. When the device resets, it will have its new FPGA
105 image loaded.
106 The verify option will tell the device to internally verify the
109 integrity of the image as it loads. This greatly increases the loading
110 time.
111
114 Load only the default FPGA image onto a specific N2x0 device and reset
115 uhd_image_loader --args="type=usrp2,addr=192.168.10.2,reset" --no-fw
116 Load a custom FPGA image onto a specific X3x0 device
119 uhd_image_loader --args="type=x300,addr=192.168.40.2" --fpga-
120 path="/home/user/my_x300_fpga_image.bit"
121
125 UHD documentation: http://files.ettus.com/manual/
126 GR-UHD documentation: http://gnuradio.org/doc/doxygen/page_uhd.html
128 Other UHD programs:
130 uhd_images_downloader(1) usrp2_card_burner(1)
132
134 This manual page was written by Nicholas Corgan for the Debian project
135 (but may be used by others).
136
138 Copyright (c) 2015 Ettus Research LLC
139 This program is free software: you can redistribute it and/or modify it
141 under the terms of the GNU General Public License as published by the
142 Free Software Foundation, either version 3 of the License, or (at your
143 option) any later version.
144 This program is distributed in the hope that it will be useful, but
146 WITHOUT ANY WARRANTY; without even the implied warranty of MER‐
147 CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
148 Public License for more details.
149UHD 3.9.0 uhd_image_loader(1)