1CFSETISPEED(3P) POSIX Programmer's Manual CFSETISPEED(3P)
2
3
4
6 This manual page is part of the POSIX Programmer's Manual. The Linux
7 implementation of this interface may differ (consult the corresponding
8 Linux manual page for details of Linux behavior), or the interface may
9 not be implemented on Linux.
10
12 cfsetispeed — set input baud rate
13
15 #include <termios.h>
16
17 int cfsetispeed(struct termios *termios_p, speed_t speed);
18
20 The cfsetispeed() function shall set the input baud rate stored in the
21 structure pointed to by termios_p to speed.
22
23 There shall be no effect on the baud rates set in the hardware until a
24 subsequent successful call to tcsetattr() with the same termios struc‐
25 ture. Similarly, errors resulting from attempts to set baud rates not
26 supported by the terminal device need not be detected until the tcse‐
27 tattr() function is called.
28
30 Upon successful completion, cfsetispeed() shall return 0; otherwise, -1
31 shall be returned, and errno may be set to indicate the error.
32
34 The cfsetispeed() function may fail if:
35
36 EINVAL The speed value is not a valid baud rate.
37
38 EINVAL The value of speed is outside the range of possible speed values
39 as specified in <termios.h>.
40
41 The following sections are informative.
42
44 None.
45
47 None.
48
50 Refer to cfgetispeed().
51
53 None.
54
56 cfgetispeed(), cfgetospeed(), cfsetospeed(), tcsetattr()
57
58 The Base Definitions volume of POSIX.1‐2017, Chapter 11, General Termi‐
59 nal Interface, <termios.h>
60
62 Portions of this text are reprinted and reproduced in electronic form
63 from IEEE Std 1003.1-2017, Standard for Information Technology -- Por‐
64 table Operating System Interface (POSIX), The Open Group Base Specifi‐
65 cations Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of
66 Electrical and Electronics Engineers, Inc and The Open Group. In the
67 event of any discrepancy between this version and the original IEEE and
68 The Open Group Standard, the original IEEE and The Open Group Standard
69 is the referee document. The original Standard can be obtained online
70 at http://www.opengroup.org/unix/online.html .
71
72 Any typographical or formatting errors that appear in this page are
73 most likely to have been introduced during the conversion of the source
74 files to man page format. To report such errors, see https://www.ker‐
75 nel.org/doc/man-pages/reporting_bugs.html .
76
77
78
79IEEE/The Open Group 2017 CFSETISPEED(3P)