1App::Pinto::Command::upUdsaetre(C3o)ntributed Perl DocumAepnpt:a:tPiionnto::Command::update(3)
2
6 App::Pinto::Command::update - update packages to latest versions
7
9 version 0.14
10
12 pinto --root=REPOSITORY_ROOT update [OPTIONS] TARGET ...
13
15 !! THIS COMMAND IS EXPERIMENTAL !!!
16 This command updates packages in your repository to the newer versions
18 in an updstream repository. By default, Pinto takes the first newer
19 version that it finds. If the "--cascade" option is used, then Pinto
20 will take the newest version it finds among all the upstream
21 repositories.
22
24 Arguments are the names of the pakcages you want to install. If using
25 the "--all" or "--roots" options then arguments are not allowed.
26 You can also pipe arguments to this command over STDIN. In that case,
28 blank lines and lines that look like comments (i.e. starting with "#"
29 or ';') will be ignored. If using the "--all" or "--roots" options,
30 then input will not be read from STDIN.
31
33 --all
34 Update all distributions in the stack. We do not attempt to update
35 locally added distributions unless "--force" is used. If this
36 option is used, then package names cannot be given as command
37 arguments. See also the "--roots" option.
38 --cascade
40 !! THIS OPTION IS EXPERIMENTAL !!
41 When searching for a package (or one of its prerequisites), always
43 take the latest satisfactory version of the package found amongst
44 all the upstream repositories, rather than just taking the first
45 newer version that is found. Remember that Pinto only searches the
46 upstream repositories when the local repository does not already
47 contain a satisfactory version of the package.
48 --diff-style=STYLE
50 Controls the style of the diff reports. STYLE must be either
51 "concise" or "detailed". Concise reports show only one record for
52 each distribution added or deleted. Detailed reports show one
53 record for every package added or deleted.
54 The default style is "concise". However, the default style can
56 changed by setting the "PINTO_DIFF_STYLE" environment variable to
57 your preferred STYLE. This variable affects the default style for
58 diff reports generated by all other commands too.
59 --dry-run
61 Go through all the motions, but do not actually commit any changes
62 to the repository. At the conclusion, a diff showing the changes
63 that would have been made will be displayed. Use this option to
64 see how upgrades would potentially impact the stack.
65 --force
67 Forcibly unpin any packages that require updating. The pins will
68 not be restored after a succesful update.
69 --no-fail
71 !! THIS OPTION IS EXPERIMENTAL !!
72 Normally, failure to pull a target (or its prerequisites) causes
74 the command to immediately abort and rollback the changes to the
75 repository. But if C <--no-fail> is set, then only the changes
76 caused by the failed target (and its prerequisites) will be rolled
77 back and the command will continue processing the remaining
78 targets.
79 This option is useful if you want to throw a list of targets into a
81 repository and see which ones are problematic. Once you've fixed
82 the broken ones, you can throw the whole list at the repository
83 again.
84 --message=TEXT
86 -m TEXT
87 Use TEXT as the revision history log message. If you do not use
88 the "--message" option or the "--use-default-message" option, then
89 you will be prompted to enter the message via your text editor.
90 Use the "PINTO_EDITOR" or "EDITOR" or "VISUAL" environment
91 variables to control which editor is used. A log message is not
92 required whenever the "--dry-run" option is set, or if the action
93 did not yield any changes to the repository.
94 --pin
96 Pins the packages to the stack, so they cannot be changed until you
97 unpin them. Only the packages in the requested targets will be
98 pinned -- packages in prerequisites will not be pinned. However,
99 you may pin them separately with the pin command if you so desire.
100 --recurse
102 --no-recurse
103 Recursively pull any distributions required to satisfy
104 prerequisites for the targets. The default value for this option
105 can be configured in the pinto.ini configuration file for the
106 repository (it is usually set to 1). To disable recursion, use
107 "--no-recurse".
108 --roots
110 Updates the root distributions of the stack. We do not attempt to
111 update locally added distributions unless "--force" is used. If
112 this option is used, then package names cannot be given as command
113 arguments. See also the "--all" option.
114 --skip-missing-prerequisite=PACKAGE
116 -k PACKAGE
117 !! THIS OPTION IS EXPERIMENTAL !!
118 Skip any prerequisite with name PACKAGE if a satisfactory version
120 cannot be found. However, a warning will be given whenever this
121 occurrs. This option only has effect when recursively fetching
122 prerequisites for the targets (See also the "--recurse" option).
123 This option can be repeated.
124 --skip-all-missing-prerequisites
126 -K !! THIS OPTION IS EXPERIMENTAL !!
127 Skips all missing prerequisites if a satisfactory version cannot be
129 found. However, a warning will be given whenever this occurrs.
130 This option will silently override the
131 "--skip-missing-prerequisite" option and only has effect when
132 recursively fetching prerequisites for the targets (See also the
133 "--recurse" option).
134 --stack=NAME
136 -s NAME
137 Puts all the packages onto the stack with the given NAME. Defaults
138 to the name of whichever stack is currently marked as the default
139 stack. Use the stacks command to see the stacks in the repository.
140 --use-default-message
142 -M Use the default value for the revision history log message. Pinto
143 will generate a semi-informative log message just based on the
144 command and its arguments. If you set an explicit message with
145 "--message", the "--use- default-message" option will be silently
146 ignored.
147 --with-development-prerequisites
149 --wd
150 Also pull development prerequisites so you'll have everything you
151 need to work on those distributions, in the event that you need to
152 patch them in the future. Be aware that most distributions do not
153 actually declare their development prerequisites.
154
156 Jeffrey Ryan Thalhammer <jeff@stratopan.com>
157
159 This software is copyright (c) 2015 by Jeffrey Ryan Thalhammer.
160 This is free software; you can redistribute it and/or modify it under
162 the same terms as the Perl 5 programming language system itself.
163perl v5.32.1 2021-01-27 App::Pinto::Command::update(3)