1Locale::RecodeData::ISOU_s2e0r33C_o1n9t8r3i(b3u)ted PerlLoDcoacluem:e:nRteactoidoenData::ISO_2033_1983(3)
2
3
4

NAME

6       Locale::RecodeData::ISO_2033_1983 - Conversion routines for
7       ISO_2033_1983
8

SYNOPSIS

10       This module is internal to libintl.  Do not use directly!
11

DESCRIPTION

13       This module is generated and contains the conversion tables and
14       routines for ISO_2033-1983.
15

COMMENTS

17       The following comments have been extracted from the original charmap:
18
19        version: 1.0
20        repertoiremap: mnemonic,ds
21         source: ECMA registry
22        alias ISO-IR-98
23        alias E13B
24
25       Please note that aliases listed above are not necessarily valid!
26

CHARACTER TABLE

28       The following table is sorted in the same order as the original
29       charmap.  All character codes are in hexadecimal.  Please read
30       'ISO-10646' as 'ISO-10646-UCS4'.
31
32        Local | ISO-10646 | Description
33       -------+-----------+-------------------------------------------------
34           00 |  00000000 | NULL (NUL)
35           01 |  00000001 | START OF HEADING (SOH)
36           02 |  00000002 | START OF TEXT (STX)
37           03 |  00000003 | END OF TEXT (ETX)
38           04 |  00000004 | END OF TRANSMISSION (EOT)
39           05 |  00000005 | ENQUIRY (ENQ)
40           06 |  00000006 | ACKNOWLEDGE (ACK)
41           07 |  00000007 | BELL (BEL)
42           08 |  00000008 | BACKSPACE (BS)
43           09 |  00000009 | CHARACTER TABULATION (HT)
44           0A |  0000000A | LINE FEED (LF)
45           0B |  0000000B | LINE TABULATION (VT)
46           0C |  0000000C | FORM FEED (FF)
47           0D |  0000000D | CARRIAGE RETURN (CR)
48           0E |  0000000E | SHIFT OUT (SO)
49           0F |  0000000F | SHIFT IN (SI)
50           10 |  00000010 | DATALINK ESCAPE (DLE)
51           11 |  00000011 | DEVICE CONTROL ONE (DC1)
52           12 |  00000012 | DEVICE CONTROL TWO (DC2)
53           13 |  00000013 | DEVICE CONTROL THREE (DC3)
54           14 |  00000014 | DEVICE CONTROL FOUR (DC4)
55           15 |  00000015 | NEGATIVE ACKNOWLEDGE (NAK)
56           16 |  00000016 | SYNCHRONOUS IDLE (SYN)
57           17 |  00000017 | END OF TRANSMISSION BLOCK (ETB)
58           18 |  00000018 | CANCEL (CAN)
59           19 |  00000019 | END OF MEDIUM (EM)
60           1A |  0000001A | SUBSTITUTE (SUB)
61           1B |  0000001B | ESCAPE (ESC)
62           1C |  0000001C | FILE SEPARATOR (IS4)
63           1D |  0000001D | GROUP SEPARATOR (IS3)
64           1E |  0000001E | RECORD SEPARATOR (IS2)
65           1F |  0000001F | UNIT SEPARATOR (IS1)
66           20 |  00000020 | SPACE
67           30 |  00000030 | DIGIT ZERO
68           31 |  00000031 | DIGIT ONE
69           32 |  00000032 | DIGIT TWO
70           33 |  00000033 | DIGIT THREE
71           34 |  00000034 | DIGIT FOUR
72           35 |  00000035 | DIGIT FIVE
73           36 |  00000036 | DIGIT SIX
74           37 |  00000037 | DIGIT SEVEN
75           38 |  00000038 | DIGIT EIGHT
76           39 |  00000039 | DIGIT NINE
77           3A |  00002446 | OCR BRANCH BANK IDENTIFICATION
78           3B |  00002447 | OCR AMOUNT OF CHECK
79           3C |  00002448 | OCR DASH
80           3D |  00002449 | OCR CUSTOMER ACCOUNT NUMBER
81           7F |  0000007F | DELETE (DEL)
82

AUTHOR

84       Copyright (C) 2002-2017 Guido Flohr <http://www.guido-flohr.net/>
85       (<mailto:guido.flohr@cantanea.com>), all rights reserved.  See the
86       source code for details!code for details!
87

SEE ALSO

89       Locale::RecodeData(3), Locale::Recode(3), perl(1)
90

POD ERRORS

92       Hey! The above document had some coding errors, which are explained
93       below:
94
95       Around line 725:
96           =cut found outside a pod block.  Skipping to next block.
97
98
99
100perl v5.32.1                      2021-01-2L7ocale::RecodeData::ISO_2033_1983(3)
Impressum